REPAIR MAINT OF MISC FURNITURE AT FURNITURE YARD AT MIL STN GAYA

Amount

Table Writing multipurpose TP-Godrej

Materials and labour for removing denting wherever required making the surface smooth after removing old paint scrubbing with emery paper, removing existing treatment completely , filling putty at required places and spray painting in OG/Grey/white shade (as required) with two coats of 1st quality synthetic enamel paint out of the following makes Asian/Berger/Nerolac.

M & L for Gas welding to frame of Table writing Multipupose Godrej including preparation of surface and removing the unwanted welding spot all as per existing pattern specified and as directed by Engineer-in-Charge.

Material and labour for replacement of lock with new lock of brass 4 lever with duplicate keys to be fixed with machine screws of required size all as specified and directed by the Engr-in-charge(Make of lock- HARISON/GODREJ):-

Taking out unserviceable top and S&F new top 1200 mm x 600mm made out of 19mm thick Ext -Gde prelaminated particle board BWR grade, bended with phenol formaldehyde synthetic resin adhesive with malamine finish ISI marked IS-12823 (1990). Gde-I type II having desired shade on one side and balancing white lamination on other side, including 6mm thick teak wood edging all around with Fevicol,nails and Polish complete all as directed by Engineer-in-Charge.

Material and labour for replacement of old unserviceable drawers with new drawer made out of 20 G MS sheet made to shape as per drg and as specified by the Engr-in-charge, duly painted with two coats of synthetic enamel paint over a coat of red oxide primer all as per existing pattern specified and as directed by Engineer-in-Charge.

Material and labour for replacement of PVC handle of drawer with under supporting to be fixed with machine screws of required shape and size all as specified and directed by the Engr-in-charge.

Book Case (wooden) (FD-45,237)

Dismantling carefully and taking out old unserviciable/damaged Top of Book Case and supply & fixed of new shelf made out of 2nd class hard wood to required shape & size and fixed the same properly as per drg.

Dismantling carefully and taking out old unserviciable/damaged shelf of Book Case and supply & fixed of new shelf made out of 2nd class hard wood to required shape & size and fixed the same properly as per drg.

Dismantling carefully and taking out old unserviciable/damaged bottom of Book Case and supply & fixed of new shelf along with bottom base made out of 2nd class hard wood to required shape & size and fixed the same properly as per drg.

Taking out unserviceable ply at the back side and supply & fixing made out 6mm thick ply wood commercial BWR grade-I as per drg.

Scratching the entire wooden pallets of furniture items with electic grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Table center Godrej (TP)

Dismantling carefully and taking out old unserviciable/damaged glass top of Table center Godrej and supply & fixing of new top glass made out of 12 mm thick make Godrej and equilavnt required shape (39"x25") & size and glass supporter three inch long (supporting between Glass and frame) along with air tighter fixed the same properly as per existing pattern and drg and directed by the Engr-in-charge.

Dismantling carefully and taking out old unserviciable/damaged center shelf of Table center Godrej and supply & fixing of new center shelf made out of 18 mm thick hard wood to required shape & size including 1 mm PVC Beading all around with fevicol and fixed the same properly as per existing pattern and drg and directed by the Engr-in-charge.

Dismantling carefully and taking out old unserviciable/damaged bottom glass of Table center Godrej and supply & fixing of new bottom glass made out of 10 mm thick make modiguard and equilavnt to required shape & size and fixed the same properly as per existing pattern and drg and directed by the Engr-in-charge.

Dismantling carefully and taking out old unserviciable/damaged leg of Table center Godrej and supply & fixing of new leg made out of (3''x3''x19'') inch Hard Wood including 1 mm thich PVC Beading all around and PVC Shoe with fevicol to required shape & size and fixed the same properly as per existing pattern and drg and directed by the Engr-in-charge.

Dismantling carefully and taking out old unserviciable/damaged top Horizontal stiffenerof Table center Godrej and supply & fixing of new Top Horizontal stiffener made out of (3''x3''x21'') inch Hard wood including 1 mm thich PVC Beading all around with fevicol to required shape & size and fixed the same properly as per existing pattern and drg and directed by the Engr-in-charge.

Dismantling carefully and taking out old unserviciable/damaged bottom Horizontal stiffenerof Table center Godrej and supply & fixing of new Bottom Horizontal stiffener made Hard wood including 1 mm thich PVC Beading all around with fevicol to required shape & size and fixed the same properly as per existing pattern and drg and directed by the Engr-in-charge.

Cleaning and tighting loose joints with L shaped interconneted bracket (08 Bracket in one table) and screw of loose parts of wooden surface of Table center Godrej and making good old surface and Scratching the entire wooden pallets of furniture items with electic grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

Table Steel 1500x750x750

Materials and labour for removing denting wherever required making the surface smooth after removing old paint by scrubbing with emery paper, removing existing treatment completely , filling putty at required places and spray painting in OG/Grey/white shade (as required) with two coats of 1st quality synthetic enamel paint for following Makes :- Asian/Berger/Nerolac

Taking out unserviceable top and S&F new top 1500 mm x 900 mm made out of 19mm thick Ext -Gde prelaminated particle board BWR grade, bended with phenol formaldehyde synthetic resin adhesive with malamine finish ISI marked IS-12823 (1990). Gde-I type II having desired shade on one side and balancing white lamination on other side,including 6mm thick teak wood edging all around with Fevicol,nails and Polish complete all as directed by Engineer-in-Charge.

Sofa Set 5 Seater Godrej

Removing of old latherite/Tapesty (as the care may be) from sofa set 5 seater Make : Godrej S&F new latherite / Tapesty as per exceting pattern of sofa set of all as per drg & as directed by Engr-in-charge.

supply and fixing of lower back & front support of 19mm particle particle board below the 3 seater long sofa chair alongwith preparation of tighting loose joints (lower back & front support) with legs, if any including de-rusting the surface and painting with one coat of synthetic enameled paint as as per existing pattern specified and as directed by Engineer-in-Charge.

supply and fixing of lower back & front support of 19mm particle particle board below the single seater of sofa chair alongwith preparation of tighting loose joints (lower back & front support) with legs, if any including de-rusting the surface and painting with one coat of synthetic enameled paint as as per existing pattern specified and as directed by Engineer-in-Charge.

Taking out unserviceable legs and providing new teak wood legs of the existing pattern and size fixed with MS nuts and bolts including tightening all loose members of sofa properly by providing some extra wooden supports of suitable size to connect legs and frame of sofa, screwed properly so that no loose member found in the sofa and sofa should not shake after repairing complete, if any including de-rusting the surface and painting with two coat of synthetic enameled paint as as per existing pattern specified and as directed by Engineer-in-Charge. all as specified and directed by the Engr-in-charge.

Chair Revolving /Chair Computer revolving (Drg-TP)

Supply and fixing in replacement of unserviceable seat of chair revolving with new seat 75 mm thick foam with new latherite tapestory cloth in dark colour all as per sample and as directed by Engineer-in-charge.

All as per Srl item No. 6.01 here-in-before but back of chair revolving.

supply and stictching in replacement of old /worn out tapestry/(latherite) of seat and back of chair revolving in dark colour all as per sample and directed by Engineer-in- Charge.

All as per Srl item no. 6.01 here-in-before but hydraulic system of chair revolving.

All as per Srl item No. 6.01 here-in-before but Base chromium plated all as specified and directed by the Engineer –in- charge.

All as per Srl item No. 6.01 here-in-before but with wheels of chair revolving all as specified and directed by the Engineer –in- charge.

All as per Srl item No. 6.01 here-in-before but arms with screws of chair revolving.

Chair Padded with Arm ( Drg : TP)

Dismentling of old and unserviceable seat from chair and supply & fixing of new seat cushion and tapestry (front and back portion both) and rubber rings around the seatsas per sample complete all as specified and directed as per Engineer -in- Charge.

All as per Srl item No. 7.01 above but back rest of Chair with Padded Arm complete all as specified and directed as per Engineer -in- Charge.

Cleaning of steel surface of Chair with Padded Arms and making good old surface and applying one coat of black synthetic enamel paint complete all as specified and directed

Supply & fixing new arm of chair padded suitable size and design as per orignal pattern of different make and model all as specified and directed by the Engineer –in- charge.

Supply & fixing in replacement of unserviceable rubber shoes of chair padded with arms with new rubber shoes all as specified and directed by the Engineer –in- charge.

Table Bed Side Godrej ( Drg : TP)

Dismantling carefully and taking out old unserviciable/damaged Side portion of size (20"x17") of the Table Bed Side Godrej as to match with the existing made out of 18mm thick pre-laminated particle board including 1 mm thich PVC Beading all around with fevicol to required shape and size with laminated finish. All as per existing pattern and drg and as directed by Engr-in-Chrge.

Dismantling carefully and taking out old unserviciable/damaged Top portion of the table bed side as to match with the existing made out of 18mm thick pre-laminated particle board with laminated finish and PVC beading all round with fittings and fixtures as required shape & size and fixed the same properly as per drg. All as per existing pattern and drg and as directed by Engr-in-Chrge.

Dismantling carefully and taking out old unserviciable/damaged Bottom portion of the table bed side as to match with the existing made out of 18mm thick pre-laminated particle board with laminated finish and PVC beading all round with fittings and fixtures as required shape & size and fixed the same properly as per drg. All as per existing pattern and drg and as directed by Engr-in-Chrge.

Dismantling carefully and taking out old unserviciable/damaged drawer of table bed side Godrej and supply & fixed of new drawer made out of 18mm pre-laminated particle board of approved shade and handle along with telescopic channels with ball for easy movement and PVC beading all round with fittings and fixtures as required shape & size and fixed the same properly all as per drg and as directed by Engr-in-Chrge.

Dismantling carefully and taking out old unserviciable/damaged back portion of the table bed side as to match with the existing made out of 18mm thick pre-laminated particle board with laminated finish and PVC beading all round with fittings and fixtures as required shape & size and fixed the same properly as per drg. All as per existing pattern and drg and as directed by Engr-in-Chrge.

Preparation of tighting loose joints with L shaped interconneted servo bracket and screw of loose surfaces, if any including de-rusting the surface then rubbing with sand/emery paper and applying malamine polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Peg Table

Taking out unserviceable top and S&F new top of table peg made out of 19mm thick Exterior Grade prelaminated particle board BWR grade bonded with phenol formaldehyde synthetic resin adhesive with malamine finish ISI marked IS-12823 (1990). Gde-I type II having desired shade on one side and balancing white lamination on other side, including 6mm thick teak wood edging all around with Fevicol and nails and finish with french polish complete all as per existing pattern specified and as directed by Engineer-in-Charge.

Taking out unserviceable long rail of Peg Table and providing new long rail of Ist class hard wood [Teak ] and finishes with one coat of French Polish after preparation of surface complete all as per existing pattern specified and as directed by Engineer-in-Charge.

Taking out unserviceable short rail of Peg Table and providing new short rail of Ist class hard wood [Teak ] and finishes with one coat of French Polish after preparation of surface complete all as per existing pattern specified and as directed by Engineer-in-Charge.

Dismantalling of unserviceable legs and supply & fixing of new legs made out of Ist class hard wood [Teak ] including hard rubber ring /PVC Shoe provided at bottom of legs with screw and a coat of French Polish with preparation of surface complete.The size and design shall be all as shown on drawing and as directed by Eng-in-charge.

supply & fixing of new ‘L” type bracket made out of Ist class hard wood and a coat of French Polish with preparation of surface complete all as per size and design of existing Peg Table and as per direction of Eng-in-charge.

M & L for polishing of Peg Table complete with one coat of french polish of appvd make duly prepared surface with sand paper of appropriate numbers and per existing pattern specified and as directed by Engineer-in-Charge. .

Chair Easy (FD-229,281)

Dismantling of old unservicable rear legs and S & F of new Rear legs made out of first class hard wood ( Teak) including hard rubber ring /PVC Shoe provided at bottom of legs with screw and a coat of French Polish with preparation of surface complete. The size and design all as shown on drg and as per directed by Eng-in-charge.

All as per item No. 10.01 above but Front legs of existing chair easy.

All as per item No. 10.01 here-in-before but side/back rail of seat/back of existing chair easy.

All as per item No. 10.01 here-in-before but arm rest of existing chair easy.

Removing of old unserviceable canes from seat and back of Easy Chair and re - canning with new plastic cane ( not recycled cane) 2 mm wide half round white colour cane (Canning shall be done as per Godrej pattern). Make : Premier/Shah or Equivalent all as specified and approved by accepting officer.

M & L for polishing of Chair Easy complete with one coat french polish of appvd make duly prepared surface with sand paper of appropriate number and as directed.

Book Shelf open small steel (FD-69(M))

Materials and labour for removing denting wherever required making the surface smooth after removing old paint by scrubbing with emery paper, removing existing treatment completely , filling putty at required places and spray painting in OG/Grey/white shade (as required) with two coats of 1st quality synthetic enamel paint for following Makes :- Asian/Berger/Nerolac

Material and labour for replacement of existing unserviceable shelf and clamps (Nuts & Bolts) with new shelf and clamps(nuts and bolts) made out of 20 guage MS Sheet made to shape as per existing pattern specified and as directed by the engr-in-charge.

Table Computer ( Drg : TP)

S & F New top of table computer made out of 18mm pre-laminated Particle board of approved shade along with PVC beading all round with fittings and fixtures with matching shade including dismantling unserviceable one all as per existing pattern and drg and as directed by Engr-in-Chrge.

Dismantling carefully and taking out old unserviciable/damaged shelf of computer table and supply & fixed of new shelf made out of 18mm pre-laminated particle board of approved shade along with PVC beading all round with fittings and fixtures required shape & size and fixed the same properly as per existing pattern and drg and as directed by Engr-in-Chrge.

Dismantling carefully and taking out old unserviciable/damaged drawer of computer table and supply & fixed of new drawer made out of 18mm pre-laminated Particle board of approved shade along with telescopic channels with ball for easy movement including lock and PVC beading all round with fittings and fixtures as required shape & size and fixed the same properly as per existing pattern and drg and as directed by Engr-in-Chrge.

Supply & fixing in replacement of unserviceable wheel of computer table with new twin wheel castors are injection moulded in Black-Nylon all as specified and directed by the Engineer –in- charge.

S & F New keyboard tray of table computer made out of 18mm pre-laminated particle board of approved shade along with telescopic channels with ball for easy movement including dismantling unserviceable one all as per existing pattern and drg and as directed by Engr-in-Chrge.

Preparation of tighting loose joints with L shaped interconneted servo bracket and screw of loose surfaces, if any including de-rusting the surface then rubbing with sand/emery paper and applying malamine polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as per existing pattern and drg and as directed by Engr-in-Chrge.

Book shelf large steel / Rack Steel Adjustable (FD-69(M))

Materials and labour for removing denting wherever required making the surface smooth after removing old paint by scrubbing with emery paper, removing existing treatment completely , filling putty at required places and spray painting in OG/Grey/white shade (as required) with two coats of 1st quality synthetic enamel paint for following Makes :- Asian/Berger/Nerolac

Material and labour for replacement of existing unserviceable shelf and clamps (Nuts & Bolts) with new shelf and clamps(nuts and bolts) made out of 20 guage MS Sheet made to shape as per existing pattern specified and as directed by the engr-in-charge.

Charpoy GI Pipe with nylon Newar as under :-(FD-220)

Tacking out old unserviceable long rail of Charpoy GI Pipe and S&F new long rail made ISI Mark

Taking out old U/S short rail from Charpoy GI pipe with plytop and S&F with replacement of the same from the item recd from item at Sl NO. 14.01 with threading at both ends.

Taking out old u/s legs and S&F with replacement of the same from the item recd from item at Srl No. 14.02 with proper threading at one end.

S & F New elbow in place of damaged/broken elbow 32mm dia Med gde 3 way ISI maked(weight not less than 450gm each). All as shown on drg and as directed by Engr-In-Charge.

S & F New heavy duty checknut 32mm dia, in place of broken check nut all as shown on drg and as directed by Engr-In-Charge.

Tighting and Weaving of Charpoy GI Pipe with first class white nylon newar of vigin quality not less than 1.5 Kg per charpoy all as shown on drg and as directed by Engr-in-charge.

M & L 25 mm x 3 mm flat iron clamp of MNF set frame in legs of charpoy GI Pipe with black colour painting complete.

Tighting of charpoy G.I pipe complete i.e long rail/short rail/ legs /checknut /Elbow etc. All as directed by Engr-in-charge.

Chair Dining High Back Cushioned (GC's Mess Chair Dining)

Dismentling of Old unserviceable rear legs of chair Dining High back and supply & fixing of new legs made out of well seasoned teak wood. All as per size and design of exiting chair Dining and as per direction of Eng-in-charge as shown on drg.

All as per item No.15.01 above but front legs of chair Dining High back with proper design as per existing chair.

All as per item No.15.01 above but back Support of chair Dining High back with proper design as per existing chair.

All as per item No.15.01 above but removing of old unserviceable cushion from seat of chair Dining High back and replacing the same the new cushion of 32 density complete as specified and approved by Accepting Officer. All as shown on drg and design as per existing chair.

All as per item No.15.01 above but removing of old unserviceable cushion from back of chair Dining High back and replacing the same the new cushion of 32 density complete as specified and approved by Accepting Officer. All as per size and design of exiting chair dining and as per direction of Eng-in-charge as shown on drg.

All as per item No.15.01 above but removing of old unserviceable latherite from back support of chairs Dining high back and replacing the same with new latherite complete as specified and approved by accepting officer. All as per size and design of exiting chair dining and as per direction of Eng-in-charge as shown on drg.

All as per item No.15.01 above but removing of old unserviceable Latherite from seat of chair Dining High back and replacing the same the new latherite complete as specified and approved by Accepting Officer. All as per size and design of exiting chair dining and as per direction of Eng-in-charge as shown on drg.Latherite sample to be got approved by GE.

M & L Polishing of chair Dining High back complete with one coat french polish of approved make duly prepared surface with sand paper of appropriate number and as direction.

Charpoy With Hard Top (FD/MAP-II/01)

Taking out old U/S ply from charpoy with hard top and S&F new 12mm ply BWR type alongwith 10 Nos of nut and bolts of appropriate approved size in each charpoy. All as specified in drg and as directed by Engr-In-Charge.Make : Kitply/Century/National.

S & F (with proper welding process) flat iron Clamp 25x60x5 mm, 01 Nos in each side of short rail of each charpoy. The Clamp shall be painted throughout with 1st quality synthetic enamel paint in black shade over a coat of red oxide primer.All as specified in drg and as directed by Engr-In-Charge.

Materials and labour for removing denting wherever required making the surface smooth after removing old paint by Grinding machine removing existing treatment completely and a coat of red oxide primer , filling putty at required places and spray painting in OG/Grey/white shade (as required) with two coats of 1st quality synthetic enamel paint for following Makes :- Asian/Berger/Nerolac of the following items.

Supply and fixing PVC toes/shoe to charpoy With Hard Top of standard approved quality. (DRG No - FD/MAP-II/01)

Bed Hard (FD/E6/MAP/08)

Taking out old U/S ply from Hard Bed MAP and S&F new 12mm ply BWR type alongwith 12 Nos of nut and bolts of appropriate approved size in each charpoy. All as specified in drg and as directed by Engr-In-Charge.Make : Kitply/Century/National.

Taking out unserviceable paticle board of foot board and S&F new paricle board of foot board made out of 19mm thick Ext -Gde prelaminated particle board BWR grade, bended with phenol formaldehyde synthetic resin adhesive with malamine finish ISI marked IS-12823 (1990). Gde-I type II having desired shade on one side and balancing white lamination on other side, including 1.5 mm thick teak PVC edging all around with Fevicol,nails and Polish complete all as directed by Engineer-in-Charge.

Taking out unserviceable paticle board of Head board and S&F new paticle board of head board made out of 19mm thick Ext -Gde prelaminated particle board BWR grade, bended with phenol formaldehyde synthetic resin adhesive with malamine finish ISI marked IS-12823 (1990). Gde-I type II having desired shade on one side and balancing white lamination on other side, including 1.5 mm thick teak PVC edging all around with Fevicol,nails and Polish complete all as directed by Engineer-in-Charge.

Materials and labour for removing denting wherever required making the surface smooth after removing old paint by Grinding machine removing existing treatment completely and a coat of red oxide primer , filling putty at required places and spray painting in OG/Grey/white shade (as required) with two coats of 1st quality synthetic enamel paint for following Makes :- Asian/Berger/Nerolac of the following items.

Supply and fixing PVC toes/shoe to charpoy With Hard Top of standard approved quality. (DRG No - FD/MAP-II/01)

Chair Dining long back (FD/E6/MAP/10)

Taking out unserviceable cushion and S&F new Foam cushion 75mm thick and 32 density duly covered with tapestry cloth of approved quality.

Scratching the entire wooden pallets of furniture items with electric grinder ,filling putty to the bore holes making surface smooth by scratching it with different types of sand emery paper, the item shall be french polished with high glossy finish complete all as specified and directed by Engineer -in-charge.

M/S MAGADH CONSULTANT