Chemical parameters testing Equipment

Amount

Supply, Installation, Testing and Commissioning of Bench Top Multiparameter pH Meter edge® - Model - HI2020 of make HANNA or equivalent with required buffer/stock solution complete having following specification:

pH Electrode : HI11310 pH electrode Connectivity : 1 micro USB port for charging and PC connectivity, 1 USB port for storage Battery Type/Life : Built-in rechargeable battery with up to 8 hours of continuous use Power Supply : 230VAC to 5 VDC adapter Environment : 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions : 202 x 140 x 12.7mm (8” x 5.5” x 0.5”) Weight : 250 g (8.82 oz) (The supplier is also required to supply 01 no. additional HI11310 pH eclectrode of same make and specification & additional 500 ml bottle of standard calibration solution of pH 4.01, 7.01 and 10.01 each , 500 ml bottle of electrode storage solution and 500 ml bottle of general pourpose cleaning solution of make HANNA along with the above specified instrument set)

Supply, Installation, Testing and Commissioning of Bench Top Multiparameter EC/TDS/Salinity Meter edge® - Model - HI2030 of make HANNA or equivalent with required buffer/stock solution complete having following specification:

EC/TDS Probe : HI 763100 EC/Temperature probe Connectivity : 1 micro USB port for charging and PC connectivity, 1 USB port for storage GLP : Yes Battery Type/Life : Built-in rechargeable battery with up to 8 hours of continuous use Power Supply : 230VAC to 5 VDC adapter Environment : 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions : 202 x 140 x 12.7mm (8” x 5.5” x 0.5”) Weight : 250 g (8.82 oz) (The supplier is also required to supply 01 no. additional HI763100 EC/Temperature probe of same make and specification & additional 500 ml bottle of standard conductivity solution of 1413 μS/cm , 5000 μS/cm and 12880 μS/cm each of make HANNA along with the above specified instrument set)

Supply, Installation, Testing and Commissioning of EPA Compliant Benchtop Turbidity and Chlorine Meter - Model - HI83414 of make HANNA or equivalent with required calibration cuvettes complete having following specification:

Turbidity Range : Non-Ratio mode: 0.00 to 9.99; 10.0 to 40.0 NTU; 0.0 to 99.9; 100 to 268 Nephelos; 0.00 to 9.80 EBC Turbidity Range : Ratio mode: 0.00 to 9.99; 10.0 to 99.9; 100 to 4000 NTU; 0.0 to 99.9; 100 to 26800 Nephelos; 0.00 to 9.99; 10.0 to 99.9; 100 to 980 EBC. Free Chlorine Range : 0.00 to 5.00 mg/L Total Chlorine Range : 0.00 to 5.00 mg/L Connectivity : USB GLP : Last calibration data, calibration info Auto end : DO only BOD/OUR/SOUR : Yes (Inside/Outside limits) Display : 40 x 70 mm graphic LCD (64 x 128 pixels) with backlight Power Supply : 115/130 VAC; 50/60 Hz Environment : 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions : 230 x 200 x 145 mm (9.0 x 7.9 x 5.7”) Weight : 2.5 kg (88 oz.) ( The supplier is also required to supply 04 nos. additional calibration glass cuvettes for turbidity and chlorine, 230 ml cuvettes cleaning solution, silicone oil each of make HANNA along with the above specified instrument set)

Supply, Installation, Testing and Commissioning of Water & Wastewater Multiparameter (with COD) Photometer and pH meter - Model - HI83399 of make HANNA or equivalent with required calibration cuvettes complete having following specification:

Input Channels : 1 pH electrode input and 5 photometer wavelengths Photometer/Colorimeter Light Source : 5 LEDs with 420 nm, 466 nm, 525 nm, 575 nm, and 610 nm narrow band interference filters Photometer/Colorimeter Light Detector : silicon photo detector Number of Methods : 128 max. Connectivity : USB-A host for flash drive; micro-USB-B for power and computer connectivity GLP : calibration data for connected pH electrode Display :128 x 64 pixel LCD with backlight Power Supply : 5 VDC USB 2.0 power adapter with USB-A to micro-USB-B cable Battery Type/Life : 3.7 VDC Li-polymer rechargeable battery / >500 photometric measurements or 50 hours of continuous pH measurement Environment : 0 to 50°C (32 to 122°F), RH max 95% non-condensing Dimensions : 206 x 177 x 97 mm (8.1 x 7.0 x 3.8") Weight : 1.0 kg (2.2 lbs.) (The supplier is also required to supply 04 nos. additional sample cuvettes and caps of make HANNA along with the above specified instrument set)

Supply of graduated low form Beakers with spout (Class - A) complies to IS 2619 / EN ISO 3819 and DIN 12331 of BOROSIL® (Cat No. 1000) or equivalent of capacity :

Supply of Wash, LDFE Plastic Bottles Sqeeze type fitted with stopper and delivery tube of BOROSIL® (Cat No. 166 P) or equivalent of 500 ml capacity.

Supply of graduated single metric scale with pour out with hexagonal base class - A with individual calibration certificate Cylinders complies to IS 878, ISO 4788 of BOROSIL® (Cat No. 3021) or equivalent of capacity :

Supply of graduated Erlenmeyer, Conical, narrow mouth Flasks class - A complies to IS 1381 (Part - I) , DIN/ ISO 1773 of BOROSIL® (Cat No. 4980) or equivalent of capacity :

Supply of measuring (Mohr type), accuracy as per class - A with individual calibration certificate Pipettes complies with IS , ISO 835 of BOROSIL® (Cat No. 7059) or equivalent of capacity :

Supply of Test tube with rim complies to IS 2618 , ISO/DIN 4142 of BOROSIL® (Cat No. 9800) or equivalent of 15 ml capacity

Supply of graduated Test tube with inter changeable stopper of BOROSIL® (Cat No. 9830) or equivalent of 50 ml capacity

Supply of Rectangular Bottle, medical grade HDPE conforming to USP class VI of make TARSONS® (Cat No. 5833) or equivalent of capacity :

Supply of Weighing Scale ( Electronic Balance) of make OPTICS TECHNOLOGY®, PRECISION® or equivalent having following specification :

Capacity - 0.001 gm to 220 gm, Accuracy (readibility) - 0.001 gm