PROVISION OF SECURITY FENCING WITH STEEL GATE AROUND MES OFFICE COMPLEX CAMP AREA AT ITARSI

Amount

Surface dressing by trimming of natural ground, rough excavated surfaces and filled up area to remove vegetation and/or small inequalities not exceeding 15 cm deep in soft / loose soil,and rubbish/ useless materials disposed off upto a distance 50 m outside the periphery of the area all as directed.

Excavation in trenches not exc 1.50m wide and not exc 1.50m depth for foundation ec not exc 10 sq m on plan and not exc 1.50m deep getting out in soft / loose soil all as specified and directed.

Excavating over areas, not exc 1.5 m deep and getting out in soft / loose soil all as specified and directed.

Material and labour for plain cement concrete in foundation filling and mass concrete using Type D2, 1:4:8 (using 40 mm graded aggregatae) all as specified and directed.

Material and labour for plain cement concrete 1:3:6, Type C2 (using 20 mm graded stone aggregate) as in foundations, filling and mass concrete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, for rough finished surfaces flat. Including inserting 20 mm bore LDPE pipes for provn of electric wires/gate fittings. (Note :- LDPE pipe 20 mm bore shall be measured & paid separately) all as specified and directed.

Supplying and fixing for mild steel angles as in post and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire, etc; flat iron fillets (for securing wire meshetc) including all necessary drilling, bolting or riveting, etc and similar work cnforminig to Fe-290 Gde E-165 all as specified and directed.

Material and labour for preparing surfaces of steel and iron work, new or old of any description and treating ends of posts, area treatedt exc 0.1 Sq m but not exc 0.5 Sq m each, treated with tar or coal tar blck paint all as specified and directed.

Material and labour for precast cement concrete block masonry with solid blocks exc 10cm in width of plain cement concrete type C1 1:3:6 (using 20mm graded aggregate) set in cm 1:6 inlcuding provision of bituminous filler board at the construction joints wherever required as directed by the Engineer-in-Charge all as specified and directed. (Bituminous filler board will be measured and paid separately)

Material and labour for plain cement concrete (1:3:6) Type C1 (using 20 mmm graded aggregates) as in Coping finished even and smooth furfaces all as specified and directed.

Material and labour for rendering to fair finished surfaces of walls, concrete in cement mortar 10mm thick in CM 1:6, finished fair and even all as specified and directed.

Hardcore of gauge n exc. 63 mm size broken stone or boulders, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n exc 25 cm in soft / loose soil all as specified and directed.

Removal of excavated soil to a distance not exceeding 50m and depositing as directed at a level not exceeding 1.50 above the starting point all as specified and directed.

Supply only chain link MS galvanised fencing, of 4mm dia mild steel wire, mesh size 50mm x 50mm all as specified and directed.

Fixing only chain link fening including line wires, any mesh, size type to any type of standards, rails,straining bolts, etc. including provission of binding wire all as specified and directed.

Material and labour for plain mild steel wire, galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and or to straining bots, including securing with provision of GI tying wire, iron staples or steel pins, etc as directed (each line of wire to be measured)

Material and labour for 100mm thick, Cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base floors all as specified and directed.

Material and labour for 100mm thick, Cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in floors/pavings all as specified and directed.

Supply and fixing for MS screw bolt 12mm dia (machine made) with hexognal or square head one end and scured and other or screwed both end each scewed end to be fitted with 2 washers and one hexonal or square exc 10cm and n exc 5cm long etc all as specified and directed.

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc as directed (each line wire to be measured all as specified and directed.

Material and labour for preparing new steel surfaces over 10 cm in girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Material and labour for preparing newly plastered surfaces of walls and applying three coats of white wash all as specified and directed.

Material and labour for Reinforced Cement Concrete (nominal mix) type B1 (1:2:4, using 20 mm graded aggregates), in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc all as specified and directed.

Material and labour for Reinforced Cement Concrete (nominal mix) type B1 (1:2:4, using 20 mm graded aggregates), in Columns, pillars etc all as specified and directed.

Use and waste of form work to sides of foundation concrete finished rough and for flat furfaces all as specified and directed.

M&L mild steel TMT bars 10 mm dia and over in section, cut to length bent to shape required incl bending spirally for hooping for columns, binding with and including mild steel (annealed) not less than 0.9mm dia all as specified and directed.

M&L mild steel TMT bars 10 mm dia and over in section, cut to length bent to shape required incl bending spirally for hooping for columns, binding with and including mild steel (annealed) not less than 0.9mm dia for stirrups all as specified and directed.

Supply and fixing framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of grade Fe-290 (Gde E-165) all as specified and directed.

Supply and fixing Mild steel, plain, black sheet 1.60mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required all as specified and directed.

Supply and fixing bands, straps, hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified and directed.

Writing letters or figures using flurescent paint (Block, Roman, Italic or indian) not exc 30 cm high all as specified and directed.

Supply and fix PVC (SWR) pipe 75mm bore single socket in any length laid in PCC soild block masonry as in weep holes

Supply only 18-20 mm thick Preformed filler board

Supply only Low Density Polyethylene pipe (LDPE) 20 mm dia

pyarelal galar

Singh and sons constructions

M/s SHIVRATAN CONSTRUCTION

Veer Brothers

Vee kay construction

Sachdeva Enterprises

TANUJ CONST. CO.