CONSTRUCTION OF INDOOR BADMINTON COURT IN PLAYING GROUND AT DR.AMBAREESH ROAD IN HEBBAL 1ST STAGE MYSURU

CONSTRUCTION OF INDOOR BADMINTON COURT IN PLAYING GROUND AT DR.AMBAREESH ROAD IN HEBBAL 1ST STAGE MYSURU

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

1.1 kV, XLPE or Heat resistant PVC

insulated, PVC exutruted Inner Seath

Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip

thickness and resistivity as per IS-3975

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Supplying & fixing miniature circuit breakers on existing MCB

distribution boards using necessary fixing materials and 'C' Type

curve, indicator ON/OFF, energy cross-3 with Short circuit breaking

Supply and fixing of 3pole power contactor with NO/NC contacts on

existing wood/panel board using necessary bolts, nuts, washers

and wiring etc., complete with AC-3 Rating and as per IS-13947.

Installation of Pre-Insulated Lug - CPTAU for 16 Sqmm ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

Supplying & fixing of Porcelain fuse channel with cut out on

existing wooden/panel using necessary nuts, bolts and washers.

16 A ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHA...

Epoxy Terminating Kit (Pothead) suitable

for 1.1 kV, LTUG Cable

Up to 4C x 50 Sqmm ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CHARGE OF WORK

Wiring for lighting/power circuit using one of FRLS PVC insulated

1100V grade, multistrand copper wire with low conductor resistance

single core in open or concealed system of wiring with specified IS...

Supply and fixing polished wood board made of not less than

15mm thick plank on both sides of not more than 2 pieces and

fixing the same to the wall using tapered inverted wooden plugs

Supplying PVC flexible conduit pipe .... mm dia fixing on surface

over inverted tapered wooden plugs or phill plugs or rawl plugs and

clamped using heavy gauge saddles at an interval of 300 mm using N...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C.

cutouts and other equipment's on the meter board using 40 mm dia

2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

Supplying and fixing Microprocessor based Electronic timer (without

contactor, Din Mounting using necessary bolts, nuts and washers etc.,.)

3-120sec setting ---- WITH ALL LEAD AND LIFT AND AS PER THE ...

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to

32/63 A three phase 4 wire whole current class-1 Accuracy Energy

Meter ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINE...

Fabricating supplying and mounting MS box made out ....SWG

suitable for floor /wall mounting, fully weather proof with provision

for better heat dissipation, provided with hinged front cover,

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the

existing wood/panel board using necessary screws, bolts, nuts,

necessary phase separators, handle and wiring complete. Protection of

Wiring for lighting/power circuit using one of FRLS PVC insulated

1100V grade, multistrand copper wire with low conductor resistance

single core in open or concealed system of wiring with specified IS...

Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick

confirming to IS 2509 with suitable size bends, junction boxes,

adhesive paste etc , and fixing using inverted wood plugs in case of...

Supplying and installation of Synthetic Badminton court, the court surface will layer over and above base floor (Made out of concrete) - 9 Layer

Synthetics Badminton 9 Layers

1. Two layers of Filler c...

Supplying and installation of Badminton court pole made out 40x40 pipe, Pole to be provided with adjustable rachid/winch with Net ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINEER IN-CH...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing, laying, spreading and compacting graded stone

aggregate to wet mix macadam specification including premixing

the Material with water at OMC in mechanical mix plant carriage

of mixed Mate...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Cod...

Providing Coursed rubble masonry (first sort) with hard stone in foundation

and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF ENGINE...

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

Providing and laying in position Ready Mixed or Batch Mixed concrete as per

IS 10262 mix design procedure for Cement Concrete works in a...

Addendum I - Percentage Additionalities for Formwork,

Centering & Scaffolding Foundation upto Plinth -

a. Isolated footings. 8% on finished rate of concrete per m3 ---- WITH ALL LEAD AND LIFT AND AS...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, ty...

Providing and constructing load bearing wall with Solid Concrete blocks

of size 400x150x200mm having block density more than 1800kg/m3

and minimum compressive strength of 4.00 N/mm2 conforming to IS...

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...

Supplying of 1440rpm heavy duty exhaust fan with bracket blades

suitable to operate on 230V 50Hz, AC Supply complete.

6.2.2 15" Sweep (450 mm) ---- WITH ALL LEAD AND LIFT AND AS PER THE DIRECTION OF E...

Providing and fixing glazing in aluminium door, window, ventilator

shutters and partitions etc. with EPDM rubber / neoprene gasket

etc. complete as per the architectural drawings and the directions ...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:

4 fine sand) to brick masonry including rounding off corners wherever

required smooth rendering, providing and removing scaffolding, ...

Finishing walls with Acrylic Smooth exterior paint of required shade :New

work (Two coat applied @ 1.67L/10 m² over and including priming coat of

exterior primer applied @ 2.20 kg/10 m²) with pain...

Providing and laying Polished Granite stone flooring in required design

and patterns, in linear as well as curvilinear portions of the building all

complete as per the architectural drawings with 18...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...