PROVISION OF CHAIN LINK FENCING IN VACANT LAND BEHIND IOLAV BUILDING AT HVF ESTATE.

Excavating post holes (or similar holes) in in hard/dense soil each n exc 0.5 cu. m, getting out, including removal of earth from the site returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm

Excavating in hard/dense soil in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out.

Material and labour for Sand filling under floors or in foundations including watering and consolidation

M & L for P.C.C 1:3:6, C-1 type using 20mm graded aggregates in foundation, walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases).

M & L for reinforced cement concrete type B-1, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exceeding 100 sq cm and not exceeding 250 sq.cm with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed

Material and labour for providing reinforced cement concrete in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete B1 Type 1:2:4 mix using 20 mm graded aggregates.

Material and labour for form work to sides of concrete foundation, bases of column,raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter on rough finished flat surface.

Supply and fixing of twisted MS Bars 10mm dia and over, cut to length, bent to shape required, including cranking, Bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Material and labour for deformed or twisted mild steel bars 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, Bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Supply and fixing of mild steel angles Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embbeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165