Supply of De-centralized materials and work for Increasing capacity Power Transformer, enhancement of 11/0.4 kV substation, Installation of 11/0.4 kV substation, Construction and bifurcation of 11 kV line and Replacement of Damaged 11 KV V.C.B CHUNAR

Amount

Supply of following Decentralized materials at the works site as per RESSPO norms.

Stone pad 300x300x75 mm (Provided by Contractor)

X-arms holding clamps with bolts & nuts for ST/PCC poles. (Provided by Contractor)

F-bracket with bolts & nuts for ST/PCC poles (Provided by Contractor)

M.S clamp for Top, T-off channel with bolts & nuts for ST/PCC poles (Provided by Contractor)

11 KV Jointing Kit 3x185 squ mm (Provided by Contractor)

Aluminium Lug 70 mm squ (Provided by Contractor)

Aluminium Lug 120 mm squ (Provided by Contractor)

Aluminium Lug 240 mm squ (Provided by Contractor)

Copper L Piece 50x225x10 mm (LS) (Provided by Contractor)

Copper L Piece 62x225x12 mm (LS) (Provided by Contractor)

Danger board with clamp & bolts for ST/PCC poles (Provided by Contractor)

Cartage of following materials from ESC, Mirzapur to work site including loading & unloading charge.

ST Poles 11 mtr long (Provided by Department)

PCC Poles 8.5 mtr long (Provided by Department)

Line materials with ACSR Weasel Conductor (Provided by Department)

11 KV 3x185mm2 XLPE Cable (Provided by Department)

11 KV VCB O/G, 200/100/5A & I/C (Provided by Department)

Transformer 63 KVA, (Provided by Department)

Transformer 100 KVA, (Provided by Department)

Transformer 250 KVA, (Provided by Department)

Transformer 10 MVA (Provided by Department)

Erection

Erection of single support ST/PCC pole for construction of 11 KV/LT line including digging of pit, fitting of all accessories, back filling of earth & others required work.

Grouting of pole with 1:4:8 ratio of cement sand & brick ballast as per RESSPO norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost)

Earthing of Poles

Stringing & sagging of 3 phase 33/11 KV line upto proper sag including laying of ACSR Weasel Conductor, binding with insulators & jumpering.

Erection of Sectional Double Pole Structure of ST pole including digging of pit, fitting of all accessories, back filling of earth, grouting of each pole & stay sets as per RESSPO norms (cement sand & brick ballast wil be supplied by the constractor on his own his own cost)

Erection of Sectional Double Pole Structure of PCC pole including digging of pit, fitting of all accessories, back filling of earth, grouting of each pole & stay sets as per RESSPO norms (cement sand & brick ballast wil be supplied by the constractor on his own his own cost)

Mounting of 63 KVA Transformer as per RESSPO norms

Mounting of 100 KVA Transformer as per RESSPO norms

Erection of 250 KVA Transformer as per RESSPO norms

Laying of underground 11 KV 3x185mm2 XLPE Cable as per RESSPO norms

Filling of I/D/O/D 11 KV cable jointing kit 3x185 squ mm as per RESSPO norms

Installation of 11 KV VCB pannel (O/G)/(I/C), as per RESSPO norms

Testing & commissioning of (O/G)/(I/C) 11 KV swichgear as per RESSPO norms

NOC of NHAI

Erection of 10 MVA Transformer as per RESSPO norms

Cartage of received back 25 KVA Transformer from work site to ESC, Mirzapur including loading & unloading charge

Cartage of received back 63 KVA Transformer from work site to ESC, Mirzapur including loading & unloading charge

Cartage of received back 100 KVA Transformer from work site to ESC, Mirzapur including loading & unloading charge

Cartage of received back 5 MVA Transformer from work site to ESC, Mirzapur including loading & unloading charge

Dismental & Safe cartage of Old VCB Pannel From 33/11 KV S/s to ESC Mirzapur

Well type earthing of 250 KVA Transformer by using B class G.I. pipe of 1.5 " dia and making hand pipe type earth boring IInd strata of water or 60 ft. whichever is deeper about 6" of G.I. pipe shall remain above ground level 2 No. G.I. earth clamp shall also be welded to the portion of pipe which is above the ground level. Through this G.I. Clamp and G.I. Strip 30x5mm duly galvanized shall be connected with nut & bolts. Every DT shall have 2 such earthing, One earthing for T/F neutral and second earthing for T/F body. All requred materials shall by provided by the contractor.

Fencing of T/F with M.S. Square mesh welded/fixed on M.S. Angle of size 65x65x6 mm with gate hinges & shutter assembly, of over all size 3x3x2.5 mtr as per drawing

Construction of Transformer plinth for 250 KVA Transformer of 2x2x1.5 mtr. Including the work of excavation for foundation of plinth plastering of walls and finishing including cost of all materials.

Laying of Existing 11 KV Cable Including Cost of Sand & Bricks

Earthing of Indor Equipment

M/S A.K. ENTERPRISES

M/s Sharada Electricals