SPL REPAIR TO JCOS OR MD ACCN BLDG NO P 29 P 53 P 7 P 8 AND P 23 AND SPL REPAIR TO DRAINAGE IN AOR OF 657 EME BN COMPLEX (APPROX SIZE 500 RM) AT LEIMAKHONG MIL STN

Amount

Dismantling of boarding of any description fixed in any position secured with nails complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removal of rubbish from the site complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition and removing debries from site of work complete all as directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc. complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc. complete all as specified and as directed.

Taking down chowkats or frames with shutters exc. 1.50 Sqm but n.exc. 4 Sqm each (without taking of shutters from the frames) complete all as specified and as directed.

Taking down chowkats or frames with shutters n.exc. 1.50 Sqm each (without taking of shutters from the frames) complete all as specified and as directed.

Taking down shutters of any description exc. 1.00 Sqm but n.exc. 2.00 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc. 1.00 Sqm but n.exc. 2.00 Sqm each and refixing in the same opening complete all as specified and as directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position in unframed work complete all as directed

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and as directed.

Material and labour for PCC (1:5:10) type E2 (using 40 mm graded stone aggregate) as in filling of sunken floor complete all as specified and as directed.

Material and labour for providing precast cement concrete (1:2:4), type B1, (using 20mm graded aggregate) as in landings, cover slabs(for manholes, etc.), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar (1:4) including necessary form work complete all as specified and as directed.

Materials and labour for cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Material and labour for RCC (1:2:4) (Nominal Mix) type B1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and labour for 25mm thick, PCC (1:2:4), type B1, (using 20mm graded stone aggregate) as in sub base of floor and finished the surface fair and even complete all as specified and as directed.

Material and labour for 30mm thick, PCC (1:2:4) type B0, (using 12.50mm graded stone aggregate) as in top and bottom of sunken floor and finished the surface fair and even complete all as specified and as directed.

Material and labour for applying evenly a tack coat of industrial bitumen 85/25 @1.2 kg per sq.m including cleaning surfaces complete all as specified and as directed.

Supply only liquid water proofing compound (WPC) of best quality complete all as specified and as directed.

Supply only integral water proofing compound (WPC) of best quality complete all as specified and as directed.

Material and labour for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, paving, footpath etc and finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in surface channel, drain and like etc complete all as specified and as directed.

Material and labour for repair to ends of chajjas/ parapets RCC work etc by removing old concrete and cheaping loose material and cleaning of re-inforcement and applying epoxy to faciliate proper bonding with old concrete surface and finsh the surface fair and even in cement concrete (1:1.5:3) type A0 (using 12.5 mm graded stone aggregate) including scaffolding and formwork for ground floor to 4th floor complete all as specified and as directed.

Material and labour for cutting holes in brick work , built in cement mortar depth of cutting exc half brick but not exc one brick and making good the surfaces in PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) after fixing of hold fasts/ lugs and like etc complete all as specified and as directed.

Material and labour for forming Contraction (Dummy) joints 75mm deep x 10mm wide, filled with sealing compound Grade `A' complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred /stopped ends etc complete all as specified and as directed.

.-Ditto- all as per item No 33.00 above but add or deduct for each 25mm girth or part there of over or under 30cm and -ditto-.

Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

.-ditto-. all as per item No 35.00 above but except brick and .-ditto-. (Note: Serviceable brick as obtained from serial item No. 7.00 on shall be reused under this item)

Materials and labour for half brick thick brick work with sub class 'B' bricks straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and as directed.

Material and labour for well seasoned 2nd class hard wood timber in scantlings, wrought, timber framed and fixed complete all as specified and directed.

.-Ditto- all as per serial item No. 38.00 here-in- before but except timber and .-ditto-. (Note: Serviceable timber as obtained from serial item No. 15.00 on shall be reused under this item)

Supply and fixing well-seasoned 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, complete all as specified and directed. area of article not exc 200 cu. cm each, complete all as specified.

Supply and fixing of second class hardwood 20mm thick boarding planed both side with butt jiont fixed with nails in any position complete all as specified and as directed.

Material and labour for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc with rough finished surfaces of concrete flat complete all as specified and as directed.

Material and labour well-seasoned second class hard wood weather boarding, clean sawn, plain, 20mm thick or feather edged 15mm to 20 mm thick and fixed with 30mm laps complete all as specified and as directed.

Fixing only well-seasoned second class hard wood weather boarding, clean sawn, plain, 20mm thick or feather edged 15mm to 20 mm thick and fixed with 30mm laps complete all as specified and as directed. (Note: Serviceable timber as obtained from serial item No. 15.00 on shall be reused under this item)

Supply and fixing well-seasoned 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

Supply and fixing for 25mm thick factory made flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified and as directed.

Supply and fixing for factory made 35mm thick second class hardwood plain, framed panelled shutters (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fixing 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and as directed.

Material and labour for well-seasoned 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc. 6 sqcm but not exc.13 Sqcm complete all as specified and as directed.

.-Ditto- all as per item No 49.00 above but except batten and -ditto-. (Note: Serviceable timber as obtained from serial item No. 15.00 on shall be reused under this item)

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

Supply and fixing of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded decorative coloured laminates PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and decorative coloured laminates PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail or bottom rail ; panelling of decorative coloured laminates PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC laminated sheet beeding, and joined together with solvent cement and fixing in the frame at the site as per specification complete all as specified and as directed.

Supply and fixing of factory made uPVC white color sliding window three track made of extruded profiles with wall thickness of 2.3mm (± 0.2mm), window profile with hollow section with multi chamber, frame (88mm x 52mm), sliding sash (42mm x 67mm), sliding mesh sash (42mm x 57mm), sliding Interlock (one vertical length in each shutters) (45.5mm x 28mm), glazing bead (24.5mmx 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanized steel frame (30mm x 18mm), sliding mesh sash (26mm x 10mm), T profile frame will be fixed to the wall with 8mm x 100mm long fasteners including 5 mm thick one side vision glass complete all as specified and as directed. Note:- (i) The unit rate quoted by contractor includes all other connected accessories. (ii) Net opening will be measured for payment purpose.

Supply and fixing aluminium anodized grill DG-104, 10mm x 5.20mm thick fixed with 'F' section complete all as specified and as directed.

Supply and fixing 125mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 complete all as specified and as directed.

Supply and fixing 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-22 complete all as specified and as directed.

Supply and fixing 150mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fixing 125mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fixing of hasp and staple of size 100mm, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Supply and fixing 125mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

Supply and fixing 100mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

Supply and fixing as in repair 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and fixing floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and as directed.

Supply and fixing 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fixing continuous (piano) hinges, width of flaps (when open) 30mm, mild steel, bright finish or electrogalvanised complete all as specified and as directed.

Supply and fixing floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and as directed.

Supply and fixing as in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

Supply and fixing as in repair of 40mm dia cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed

Supply and fixing as in repair of magnetic catcher 20mm length with metal body and striking plate includding screws complete all as specified and as directed.

Supply and fixing as in repair of 19/20mm dia mild steel chromium plated curtain rods with and including fixing with brackets, stops, rollers etc complete all as specified and as directed.

Supply and fixing mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.

Supply and fixing mild steel TMT bars 6 to 8mm dia, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing as in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe-410W (Gde-E-250) Quality-A complete all as specified and as directed.

Supply and fixing mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Supply and fixing mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; hains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Supply and fixing steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, glazing bar dovetailed or welded for receiving glass complete all as specified and as directed.

Supply and fixing steel windows or ventilators, fixed type, with glazing bars complete all as specified and as directed.

Supply and fixing anodised aluminium sliding window three track (two glazed and one gauged shutter), sectional size of shutter frame 44x24x1.8mm and sectional size of chowkat frame 80x40x1.8mm, glazed with 5.5mm thick one side vision glass and flyproof shutter fitted with stainless steel wire gauged 0.5mm dia and aperture 1.18mm including necessary jointing cleat, rubber packing, anodised aluminium snap beading, anodised aluminium handle, screws etc complete all as specified and as directed.

Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed.

Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed.

Supply and fixing 6mm thick 5 No ply wood, grade BWR, type BB, fixed with nails to timber frame work in ceiling complete all as specified and as directed.

Supply and fixing 4mm thick E- board as in false ceiling with GI snap grid/section of size 600mm x 600mm fixed to wall hanging from soffits/trusses using adjustable supporting hanger comprising of 4mm dia MS rod or wire ‘J’ type hook, nuts, bolts, holding down clips with GI section of size 36.5mm x 25mm x 1.4mm (main tee) and 23.5mm x 26.4mm x 1.4mm (cross tee) and wall angle of size 25mm x 25mm x 1.4mm complete all as specified and as directed.

Material and labour for applying two coats of acrylic washable distemper over a coat of alkali resistance primer of surfaces of false ceiling complete all as specified and as directed.

Material and labour for 18/19mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both face fixed with screws to timber frame-work complete all as specified and as directed.

Material and labour for 18/19mm thick particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and as directed.

Supply and fixing 0.90mm thick decorative laminate type-1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.

Material and labour for roughening surfaces of old concrete floor by wire brushing, picking, sweeping cleaning and washing down with water to remove dust etc and brushing with neat cement slurry 3 Kg per sqm complete all as specified and as directed.

Material and labour for non skid ceramic coloured tiles (Premium Quality) 7 to 8mm thick (Square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles (Premium Quality) of size 300x200x7mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in white cement with pigment to match with the shade of tiles laid over and including 10mm thick cement plaster in CM (1:4) complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles (Premium Quality) of size 450x350x7mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in white cement with pigment to match with the shade of tiles laid over and including 10mm thick cement plaster in CM (1:4) complete all as specified and as directed.

Material and labour for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

Material and labour for 20-25 mm thick machine cut kota stone slab flooring over and including 20mm thick screed bed in cement mortar (1:6) with roughening of surface, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Material and labour for 20-25 mm thick machine cut kota stone slab on verticle surface as skirting/dado over and including 10mm thick cement plaster in cement mortar (1:3) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Materials and labour for 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:3) with using water proofing coumpound and finished the surfaces even and smooth without using extra cement complete all as specified and as directed. Note : WPC will be measured and paid separately under respective items.

Materials and labour for 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:4) with using water proofing coumpound and finished the surfaces even and smooth without using extra cement complete all as specified and as directed. Note : WPC will be measured and paid separately under respective items.

Materials and labour for 10 mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:4) with using water proofing coumpound and finished the surfaces even and smooth without using extra cement complete all as specified and as directed. Note : WPC will be measured and paid separately under respective items.

Materials and labour for 15 mm thick rendering on fair faces brick work in cement mortar (1:4) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

Materials and labour for 15 mm thick rendering on other than fair faces brick work in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

Materials and labour for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

Materials and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Materials and labour for preparation of old plastered surfaces of wall and applying one coat of white wash complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces of wall and applying one coats of acrylic washable distemper complete all as specified and as directed.

Material and labour for applying two coats of acrylic washable distemper over a coat of chalk whiting including preparation of newly plastered surfaces of wall complete all as specified and as directed.

Material and labour for applying two coats of cement base paint over a coat of alkali resistant primer including preparation of newly plastered surfaces of wall complete all as specified and as directed.

Material and labour for applying one coat of cement base paint including preparation of old plastered surfaces of wall complete all as specified and as directed.

Materials and labour for preparation of new plastered surfaces of walls and applying two coats of weather proof paint over a coat of acrylic primer complete all as specified and as directed.

Materials and labour for preparation of old plastered surfaces of walls and applying two coats of weather proof paint over a coat of acrylic primer and including complete removal of existing treatment complete all as specified and as directed.

Materials and labour for applying 3mm thick wall care putty on surface of wall complete all as specified and as directed.

Material and labour for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of wooden surfaces and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote complete all as specified and as directed.

Material and labour for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamal paint complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Material and labour for writing letters or figures with synthetic enamel paint (Block, Roman, Italic or Indian) not exc 30cm high complete all as specified and as directed.

Supply and fixing 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exe 0.50 Sqm in each pane after and including hacking out broken glass from wooden/metal frames complete all as specified and as directed.

Taking up or down steel tubing 15mm bore and connections including cleaning for refixing or deposited to stores complete all as specified and as directed.

Taking up or down steel tubing 20mm bore and connections including cleaning for refixing or deposited to stores complete all as specified and as directed.

Taking up or down steel tubing 25mm bore and connections including cleaning for refixing or deposited to stores complete all as specified and as directed.

Fixing only 15mm bore galvanised steel water tubing including all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and as direcetd. (Note: Serviceable pipes obtained from taking down under Sch item No 119.00 here-in-above shall be reused under this item)

Fixing only 20mm bore galvanised steel water tubing including all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and as direcetd. (Note: Serviceable pipes obtained from taking down under Sch item No 120.00 here-in-above shall be reused under this item)

Fixing only 25mm bore galvanised steel water tubing including all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and as direcetd. (Note: Serviceable pipes obtained from taking down under Sch item No 121.00 here-in-above shall be reused under this item)

Supply and fixing 15mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as direcetd.

Supply and fixing 20mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as direcetd.

Supply and fixing 25mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and as direcetd.

Supply and fixing as in repair 15mm bore bib taps, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and as directed.

Supply and fixing as in repair 15mm bore concealed stop valve, fancy type, brass chromium plated with long shank & cup screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Supply and fixing as in repair 15mm bore Chromium Plated pillar tap fancy type cast copper alloy, with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

Supply and fixing Soap dish, vitreous china white, approximate size 160x 160x90mm and fixed to plugs with chromium plated brass screws complete all as specified and as directed.

Supply and fixing as in repair 15mm dia PVC connection pipe 450mm long with PTMT nuts complete all as specified and as directed.

Supply and fixing as in repair 15mm dia PVC connection pipe 600mm long with PTMT nuts complete all as specified and as directed.

Supply and fixing as in repair of 20mm bore Gun metal gate valve with iron wheel head and gun metal spindle screwed both ends complete all as specified and as directed.

Supply and fixing as in repair vitreoues china WHB with padestal, white, flat back, of size 580X450mm including CP brackets, CP waste coupling 32 mm bore complete all as specified and as directed.

Supply and fixing as in repair 125mm dia chromium plated shower rose with revolving joints fixed to 15mm bore GI Pipe complete all as specified and as directed.

Supply and fixing as in repair for vitreous china squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding and connection to trap, flushing pipe, anti syphonage pipe, etc. including making good the disturbed floor complete all as specified and as directed.

Supply and fixing as in repair 10 litre capacity low level PVC flushing cistern white, syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed.

Supply and fixing GI spout 40mm dia projecting at least 10cm clear of wall complete all as specified and as directed.

Taking down 75/110mm dia rain water/waste pipe of any type including all fittings complete all as specified and as directed.

Supply and fixing of 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in floors complete all as specified and as directed.

Supply and fixing of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in floors complete all as specified and as directed.

Supply and fixing 75 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

Supply and fixing 75 mm bore PVC (SWR)couplers complete all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR)couplers complete all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

Supply and fixing 75 mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

Supply and fixing 75mm bore PVC (SWR) junction single, (single T) equal or unequal complete all as specified and as directed.

Supply and fixing 110mm bore PVC (SWR) junction single, (single T) equal or unequal complete all as specified and as directed.

Supply and fixing 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

Supply and fixing as in repair 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Demolition and breaking up drain pipes of internal dia 100mm (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and as directed.

Demolition and breaking up drain pipes of internal dia 150mm (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and as directed.

Supply and fixing of 160 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, , laid in trenches or in floor complete all as specified and as directed.

Supply and fixing of 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, , laid in trenches or in floor complete all as specified and as directed.

Material and labour for plain cement concrete (1:3:6) type C2 (using 40m graded crushed stone aggregate) as in bed to 160mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

Material and labour for plain cement concrete (1:3:6) type C2 (using 40m graded crushed stone aggregate) as in bed to 110mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

Supply and fixing 160 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

Cleaning of existing manholes of inner plan area upto 1.50 sqm and depth upto 2mtr by means of bailing of water with sludge by mechanical pump and removal of silt, debries, sludge and deposited in foul nalah to a distance exc 1KM but n. exc 5KM complete all as specified and as directed. Note : Cost for taking up cover/cover slab and refixing the same is included in quoted rates.

Cleaning of any type of blockage arising out of chokes from gully trap of any size including blockage in line from gully trap to 1st manhole and removal of sludge material at a distance n. exc 50M, deposit the material in excavated pit including excavation and levelling of surplus excavated soil round the pit and spreading of bleaching powder around the pit complete all as specified and as directed.

Supply and fixing as in repair stainless steel plate rack of size 24" x 36" x 10" complete all as specified and as directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed

Material and labour for point wiring (surface type) for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC casing caping of suitable size with all accessories and PVC rectangular boxes for mounting switch, socket and fan regulator etc complete all as specified and as directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

.-Ditto- all as per item No 166.00 here-in-before but for 3 pin 6 amps switch socket combination on the independant board with 1.5 Sqmm cable and -ditto-.

.-Ditto- all as per item No 166.00 here-in-before but for 3 pin 6 amps switch socket combination on the same board with 1.5 Sqmm cable and -ditto-.

.-Ditto- all as per item No 166.00 here-in-before but for one 5 pin 6/16 Amps switch socket combination on independent board with 2.5 sqmm PVC (FR-LSH) insulated un-sheathed copper conductor cable multistranded conductor 1100 volts grade and 2.5 Sqmm PVC (FR-LSH) copper conductor cable as earth continuity conductor and -ditto-.

Supply and fixing modular switch 1 way 6A, 1 module complete all as specified and as directed.

Supply and fixing modular switch 1 way 16A, 1 module complete all as specified and as directed.

Supply and fixing modular socket outlet, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

Supply and fixing modular socket outlet, 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed.

Supply and fixing ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and as directed.

Supply and fixing modular bell push switch 6 amps 1 module complete all as specified and as directed.

Supply and fixing Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed.

Supply and fixing modular white cover plate with frame, 8 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame, 6 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame, 4 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame, 3 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame, 1 module complete all as specified and directed.

Supply and fixing blank spacer plate, 1 module complete all as specified and directed.

Supply and fixing modular fan step regulator, 120W - 2 module complete all as specified and directed.

Taking down old unserviciable MCB-DB of any type and size including all fixture such as MCB, Isolator etc complete all as specified and as directed.

Supply and fixing MCB-DB SPN 8 ways double door including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed.

Supply and fixing MCB 40 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed.

Supply and fixing MCB 6 to 32 Amps, SP, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed.

Site clearance before cutting thick bushes, shrubs and tree girth n. exc 30 cm and removal of same to a distance exc 250 m but n. exc 500 m and deposited where directed complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and as directed.

Rough excavation not exceeding 1.5 m deep and getting out in soft / loose soil complete all as specified and as directed.

Returning, filling in, of soil including spreading leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material (soil) to a distance n.exc 50M and deposited/ spreaded where directed at a level n. exc 1.5M above the starting point complete all as specified and as directed .

Material and labour for sub-main wiring with PVC insulated & unsheathed two run of 6 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 6 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through suitable size of PVC casing caping in roof/wall/floor including taking down old unserviciable sub-main wiring complete all as specified and as directed. Note : Three runs of 6 Sqmm cable and PVC casing caping of suitable size shall be measured as one unit.

Taking down existing serviciable tube light fittings and kept in safe costudy in store and refixing the same tube light fittings to its original position and connecting up including provision of cable from ceiling rose complete all as specified and as directed.

Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking down old unserviciable earthing set all as specified and as directed. Notes:- (i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store and refixing the same fan to its original position and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed.

RK Enterprises

M/S Satish Chand Agarwal