REPAIRS TO HARD STANDING COMPOUND WALL FENCING GATES DRAINS FOOT PATH ETC OF AUNDH MIL STN UNDER GE MH AND RH KIRKEE

Amount

Demolition of brickwork or stone work/boulder masonary built in cement mortar or cement lime mortar all as specified

M&L for precast cement concrete, type C-1, 1:3:6 (20mm graded aggregate ) solid blocks masonary exc 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.

M&L for precast cement concrete, type C-1, 1:3:6 (20mm graded aggregate ) solid blocks masonary n.exc 10cm in width and setting in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement morter 1:4 with water proofing compound complete all as specified and as directed.(Note : WPC shall be measured and paid separetely)

Supply only intergral water proofing compound.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement morter 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new undecorated surface of wall and applying two coats of cement base paint over a coat of primer.

M&L preparation old decorated surfaces of walls and applying one coat of cement base paint all as specified.

M&L for preparation of new undecorated surface of wall and applying three coats of white wash on wall complete all as specified in SSR part-I (2009) and as directed.

M&L preparation old decorated surfaces of walls and applying one coat of white wash complete all as specified.

Dismantling fencing, wire mesh any type complete all as specified and directed by Engr in Charge

Dismantling of RCC post or struts carefully of any section embedded in natural ground incl taking out embedded portion and making good disturbed ground incl taking down/out worn out unserviceable old barbed wire, chain link fencing complete.

All as per item No. 13 here in before but embedded in concrete.

Excavation in post hole each n.exc 0.50 Cum getting out returning filling in and ramming earth around in layers n.exc 25cm watering and removed surplus soil to a distance n.exc 50m in soft/loose soil.

S&F Mild steel for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0

M&L for cement concrete in foundation PCC 1:3:6 type C2 using 40mm graded stone agg for fencing post etc.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

S&F TMT bars 6 to 8mm dia bar, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

S&F in repairs galvanised 2 strand barbed wire 2.24mm dia of wire and 2mm dia of barbed at 75mm spacing and straining and fixing to any type of stranded nails straining bolts, including securing or tying at crossing with and provn of galvanised MS wire staples or steel pins etc as specified.

All as per item No. 22 here in before but fixing only in repairs.

S&F in repair Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

Dismantling structural steel work including doors, gates but excluding framed truss etc.

M&L for Rolled mild Steel Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)(Fe 410 W (Grade E 250) quality A) complete all as specified and directed.

M&L for Rolled mild Steel for roof trusses (framed) tussed, purlins, crane gentries rails and fastenings and heavy brackets framing (Beam, tee angle channels or flat sections) including distnce pieces and cleats etc.(Fe 410 W (Grade E 250) quality A) complete all as specified and directed.

M&L for Rolled miled steel plate (plain or chequred) chanel square cut or notched (ordinary or counter shunk ) forming holes without any attachements (Fe 410 W (Grade E 250) quality A) complete all as specified and directed.

Mild steel screw bolts (machine made) 11 to 15mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old Roof sheet CGI/ PGI Sheet as specified and directed by Engineer-in-charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old Roof sheet CGI/ PGI Sheet complete all as specified and directed.

M&L for preparation of untreated new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint ( 1st grade quality ) over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of old treated steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint ( 1st grade quality ) complete all as specified and as directed.

Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level)

M&L for cement concrete type C-1, 1:3:6 (20mm graded aggregate) 75mm thick as in plinth protection, pavement etc and finished the surface even and fair.

M&L for cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick sub base or similar items all as specified and directed.

M&L fo Sand filling under floors or in foundation including watering and consolidation

M&L for 80mm thick coloured machine pressed interlocking pattern paver block any shape and size conforming to IS 15658-2006 of M-40 Grade incl all as specified and directed by Engineer-in Charge.

M & L 60 mm thick Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness M-35 Grade.

S&F Pre Polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors including 15mm thick screed bed in CM 1:6 under tiles.

S&F in repairs PVC (SWR) pipes 75 mm dia single sockets, in any length rubber ring joints, laid in trenches or in floor all as specified and directed.

M&L for Cement concrete type B2 (1:2:4) 40 mm graded aggregate as in surface channels and drains complete all as specified and directed.

Extra for fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc.

Demolition of cement concrete (re inforced) in roof floors, beams, staircase, landings, chajjas, pillars etc and similar suspended works and removing materials from site of work complete all as directed.

M&L for precast cement concrete type B-1 1:2:4 (20mm graded agg) set in CM 1:6 as in cover slabs for manholes etc.

Sunrise Traders

Kute Construction

M/S JAYCONSTRUCTION CO

L.K.R.TIWARI CONSTRUCTION

S.R.M.K Enterprises

ANJALI CONSTRUCTIONS

Shri Sant Cosntruction