Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.1 LAccepted-AOC AWADHI ROAD ADAJAN 1ST 102 DABKA NO 1 1 6 4 C 4TH FLOOR | GANDHINAGAR | L1 | Accepted-AOC L1 | |
| 2 | L2₹20.4 L+₹59,900 (3.03%)Rejected-Finance VILL CHOMON ADAMPUR JALANDHAR PUNJAB 144103 UDYAM PB 10 0011450 | JALANDHAR | PUNJAB | 144103 | L2 | Rejected-Finance Other than lowest. | |
| 3 | L3₹20.9 L+₹1.2 L (5.97%)Rejected-Finance NEAR RAILWAY CROSSING ADAMPUR DOABA JALANDHAR JALANDHAR PUNJAB 144103 | JALANDHAR | PUNJAB | 144103 | L3 | Rejected-Finance Other than lowest. | |
| 4 | L4₹21.0 L+₹1.2 L (6.01%)Rejected-Finance 0000 UNNAMED ROAD GAJIYA KANTIT VINDHYACHAL MIRZAPUR UTTAR PRADESH 231307 | MIRZAPUR | UTTAR PRADESH | 231307 | L4 | Rejected-Finance Other than lowest. |
Tender Value
₹19.9 L
EMD Value
₹39,800
Closing Date
29 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Adampur
Military Engineer services Air Force Stn Adampur 144103
REPAIR TO ROLLING SHUTTERS, STEEL GATES, RAILS, HANGERS AND BLDGS IN TECH AREA AT AF STN ADAMPUR
2022_MES_531380_1
GE/AF/ADM-17/2022-23
Open Tender
Civil Works
Item Rate
180 days
Tech area at AF Stn Adampur
Refer NIT
9 documents required · 9 mandatory
₹500
GE AF Adampur
₹39,800
Yes
29 Aug 2022
16 Jun 2022
30 Jul 2022
16 Jun 2022
29 Jul 2022
29 Jun 2022
17 Jun 2022 - 28 Jun 2022
60 days
Amount
Taking down rolling shutter from any location, straightening of curtains, making good of edges, guide chanels, necessary riveting/welding, repairing to hood cover, rotating shaft and refixing the same after repair, greasing the guide channel to make smooth functioning, replacement of steel spring, ball bearing etc if required complete all as specified of size: -
Not exceeeding 6 Sq.m area
Exceeeding 6 Sq.m area
NOTE:- Replacement of spares/parts/acessories shall be measured and paid seperatly as supply only under respective item of BoQ).
Supply only the following spares/parts/acessories of rolling shutter(s) complete all as specified.: -
Curtain iterlocking curls 75-85 mm wide (each strip) made to shape from 1 mm thick mild steel sheet.
40mm bore medium grade mild steel pipe made to shape & size as rolling shaft
25mm bore medium grade mild steel pipe made to shape & size to operate the gear box system by crank handle.
Lock plate of mild steel flat or angle iron as required at site.
Guide chennel 3.15 mm thick mild steel sheet made with 75mm depth including necessary hold fasts.
Hood cover, 1mm thick mild steel sheet made to shape.
Ball bearing of suitable size and description.
Bevel gear box and crank handle.
MS base wheel of dia 200mm and depth 60mm along with 2 Nos ball bearings and central pin on each wheel for hanger/BP door.
Mild steel top guide roller of dia 100mm and thickness 75mm, fabricated with nuts and bolts alongwith ball bearing and pin on each roller/pully for hanger/BP doors.
NOTE:- Spares/acessories shall be all as per sample kept at the office of Engineer-in-Charge.
Lifting up carefully by mechanical means steel hanger/blast pen door leaf of size area n. exc. 40 Sq.m each, inspecting the parts/members of doors, incl. repairs, welding as required, removing unserviceable members, unserviceable CGI sheets, unserviceable pully/base wheels/top rollers/ nut bolts etc. and fixing only new parts/members as mentioned here in before, fixing steel door back in same position after proper servicing & greasing for smooth noise-less movement/operation of doors complete all as specified. NOTE: Supply only spare parts to replace unserviceable members, nuts, bolts,wheels,rollers etc. shall be measured and paid separately.
Easing, adjusting,cleaning of rails, greasing of base wheels and top guide wheel of hanger/ BP door leaf having area not less than 40 Sq.m each and height not exc. 10 metre incl. minor repairs, welding, adusting base wheels and top rollers etc. to make the sliding door leaf noise-less smooth operation, complete.
Steel rolling shutter (curtain made of 1mm thick mild steel sheet) with ball bearing, as specified including top cover, anchoring rod, hasp and staple, guide chennels, strike plate etc and one shop coat of primer erected in position as indicated push pull or manual type, thickness of laths 1mm, including taking down carefully existing old rolling shutter complete all as specified of size/area: -
Area not exceeding 6 Sq.m each shutter
Area exceeding 6 Sq.m each shutter
Steel rolling shutter, gear operated type with bevel gear box and crank hanle (curtain made of 1mm thick mild steel sheet) with ball bearing, as specified including top cover, anchoring rod, hasp and staple, guide chennels, strike plate etc and one shop coat of primer erected in position as indicated push pull or manual type, thickness of laths 1mm, including taking down carefully existing old rolling shutter complete all as specified of size/area exceeding 6 Sq.m each shutter.
Welding in repairs exc. 2.5cm but n.exc. 5cm in length, thickness of metal to be welded exc. 6mm but n. exc. 9mm sheets/ plates/any other steel members, incl. cleaning and preparing the surfaces while welding, and bevelling of edges as required complete all as specified.
Framed mild steel work as in framed work such as doors, gates or frame for cooler stand with gusset plates, rails, braces etc, drilled for fixing of sheeting or other covering of door etc, to be prepared for hanging or sliding etc including either hooks and hinges or steel hanging door fittings and hanging and fixing similar work conforming to Fe-290 Gde E-165 complete all as specified.
Anti-bird net of polyester wooven of aperture size 20mm x 20mm x 2 mm thread (Garpil) at a height of 10 metre IN REPAIR, complete all as specified.
Rough cast wired glass 6mm thick and glazing with oil putty/bead area not exc.1.00 sqm each including taking out old broken glass complete all as specified.
NOTE FOR SERIAL ITEM NO. 8 TO 10: - The work is required for tech building of height upto 10 m. As such, Contractor will arrange suitable safety precaution for the labour at his end and cost of the same deemed to be included in rates quoted by the contractor.
Mild steel screw bolts ( Machine made ) 5 to 10mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to fitted with washers and one hexagonal or square nuts exc 5 cm but not exc 15 cm long fixed complete all as specified.
Cement Concrete 1:5:10 type E-2 using 40mm graded crushed stone aggregate as sub base etc complete all as specified.
Brick work using bricks as specified in PS-II clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified.
Brick work with sub class ‘B’ old size bricks (but except bricks) straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) all as specified. NOTE: Old serviceable bricks retrieved during demolition shall be re-used after cleaning.
Cutting out cracks to V- section in existing roofs or terracing, cleaning out, wetting, grouting cement slurry with pressure gun to fill complete crack with slurry to prevent leakage in roofs complete all as specified.
Galvanised corrugated mild steel sheeting 0.63mm thick with two corrugations side lap fixed with galvanised mild steel L / J type hook including washer etc as in roofs, walls, gates cladding of hanger / BPs with grade of zinc coating 275 etc. IN REPAIR complete all as specified.
Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of any colour hving tensile strength of 550 Mpa as in roof coverng/cladding to wall, fixed with self tapping screws etc. IN REPAIR complete all as specified.
75 mm thick Plain Cement Concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in flooring / hardstanding etc. complete all as specified.
40mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in floor, finished even and smooth using extra cement complete all as specified.
Glass dividing strips 38mmx3mm as in floors complete all as specified.
Rendering 15mm thick on other than fair face of brick work or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified.
Rendering 15mm thick on other than fair face of brick work or concrete surface in cement mortar (1:4) finished even and fair complete all as specified.
Preparing of old plastered or un-plastered wall surfaces and applying one coat of white wash, complete all as specified.
Preparing newly plastered wall surfaces and applying three coats of white wash complete, all as specified.
Preparing plastered ceiling surfaces and applying two coats of white wash complete, all as specified.
Preparing of old plastered or un-plastered wall surfaces and applying one coat of interior acrylic distemper, complete all as specified.
Prepration of new plastered wall surfaces complete all as specified and applying the following: - (a) Applying wall care putty, in two coats on wall surfaces & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed), complete all as specified. (b) Two coats of acrylic distemper/distemper oil emulsion (OBD) over and including a coat of acrylic emulsion primer, complete all as specified.
Prepration of new plastered wall surfaces complete all as specified and applying the following: - (a) Applying wall care putty, in two coats on wall surfaces & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed), complete all as specified. (b)Two coats of exterior acrylic emulsion over a coat of exterior (water based) primer in disruptive/camouflaging pattern of four shades, for height not exceeding 8.50 metre, over and including a coat of water based primer, complete all as specified.
NOTES APPLICABLE TO SRL ITEM 27 HERE-IN-ABOVE: (i) RGB value of four shades of disruptive/camouflaging pattern shall be all as shown on Drg No. GE/SK-1/19 sheet 1/2 & 2/2 available with Engineer-in-Charge. (ii) Preparation of surfaces shall be done with mechanised sander having suction vacuum bag using smart periodical methodology to the entire satisfation of Engineer-in-Charge and all as specified in relevent clause of MES Schedule. (iii) For performance guarantee of exterior acrylic emulsion refer PS clause 15.7 here-in-after.
Two coats of synthetic enamel paint over over old steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, over a coat of red oxide primer including preparation of new surfaces complete all as specified.
Dismantling structural steel works or of any description / type including doors, gates etc complete all as specified.
Demolition of reinforced cement concrete of any description and in any position complete all as specified.
Demolition of plain Cement Concrete in ground floor and paving not exc 15cm thick (below or above) ground level complete all as specified.
Demolition of stone / boulder, brickwork built in cement mortar including all quoins, arches, pillars etc all as specified.
Taking down cement plaster of any description on brick walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.
Notes: Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline.
M/s Sahib and Company
M/S GURBACHAN SINGH
J.K & Company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .