REPAIR REPLACEMENT OF INTERNAL ELECTRIFICATION WORKS INCLUDING REPAIRS TO SOLAR WATER HEATER FANS AND DISTRIBUTION BOARDS OF OFFICERS JCOS ORs DEF CIVILIAN MD ACCN AND OLD NEW ASHRAY GUEST ROOMS OF RANGE HILLS AREA UNDER GE MH AND RH KHADKI

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking into credit (credit for above items shall be made as per condition laid down under schedule of credit seprately ) and making good disturbed surfaces of walls, floors etc complete all as specified and directed

Material and Labour for point wiring using approved colour coding as per IS ( Red, black and green for single phase circuits), with multi stranded copper conductor 1.5 Sqmm nominal cross sectional area,single core, PVC insulated and sheathed FRLS cable1100 volts grade , ISI-694 (1990) marked with valid CML No in and including medium grade,PVC casing & capping of suitable size on walls/roof/floor etc, ISI marked with suitable accessories , mild steel/ pressed steel sunken box of 1.2 mm thick and 60 mm deep ( with earth dolly ) duly painted with two coat of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide externally , covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulator etc, including PVC insulated multistranded copper conductor 1.5 SQ mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by engr in charge for the following :- Make: Polycab /Finolex/ RR

One fan/light /bell point controlled by one switch/bell push

One switch socket outlet 5 Amps on independent board

One socket outlet 5 Amps on the same board

All as per Item No 2 here-in-before but with 2.5 Sqmm PVC insulated multistranded copper conductor cable including 2.5 sqmm PVC insulated but sheathed copper conductor FRLS cable 1100Volts grade and 2.5 sqmm as earth continuity conductor for one switch socket outlet 15 Amps on independent board complete all as specified and directed by Engr- in - Charge.

All as per Item No 2 here-in-before but with 4.0 Sqmm PVC insulated multistranded copper conductor cable including 4.0 sqmm PVC insulated but unsheathed copper conductor FRLS cable 1100Volts grade and 4 sqmm as earth continuity conductor for power socket on independent board complete all as specified and directed by Engr- in - Charge.

Material and Labour for point wiring using approved colour coding as per IS ( Red, black and green for single phase circuits), with multi stranded copper conductor 1.5 Sqmm nominal cross sectional area,single core, PVC insulated and unsheathed FRLS cable1100 volts grade , ISI-694 (1990) marked with valid CML No in and including medium grade,PVC Conduit of suitable size on walls/roof/floor etc, ISI marked with suitable accessories , mild steel/ pressed steel sunken box of 1.2 mm thick and 60 mm deep ( with earth dolly ) duly painted with two coat of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide externally , covered with 3 mm thick plasticlaminated sheet cover for fixing of switches, sockets and fan regulator etc, including PVC insulated multistranded copper conductor 1.5 Sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by engr in charge for the following :- Make Polycab /Finolex/ RR

One fan/light /bell point controlled by one switch/bell push

One switch socket outlet 5 Amps on independent board

One socket outlet 5 Amps on the same board

All as per Item No 5 here-in-before but with 2.5 Sqmm PVC insulated multistranded copper conductor cable including 2.5 sqmm PVC insulated but unsheathed copper conductor FRLS cable 1100Volts grade and 1.5 sqmm as earth continuity conductor for one switch socket outlet 15 Amps on independent board through medium PVC conduit complete all as specified and directed by Engr- in - Charge.

All as per Item No 5 here-in-before but with 4.0 Sqmm PVC insulated multistranded copper conductor cable including 4.0 sqmm PVC insulated but unsheathed copper conductor FRLS cable 1100Volts grade and 2.5 sqmm as earth continuity conductor for power socket on independent board through medium PVC conduit complete all as specified and directed by Engr- in - Charge.

Material and Labour for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 4 sqmm 1100 volt grade drawn into PVC Cassing capping of suitable size including 4.0 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including chislling/cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing surface including taking down old unserviceable/burnt wiring of any type or size complete all as specified and directed by Engr-in-Charge.. Note: Two single core cable, earth wire and PVC conduit shall be measured as one length.

Ditto item no 08 above but of 6 Sqmm.

Supply and fix in repair ceiling rose surface bakelite with three terminals type complete all as specified and directed

Supply and fix in repairs switch piano type one way 6 Amps flush type, 240volt AC complete all as specified and directed

Supply and fix in repairs socket outlet 2 in1, 3 pin 5 Amps complete all as specified and directed

Supply and fix in repairs switch socket combination(SSC) 2 in 1, 3 pin, 5 Amps flush type, 240volt AC complete all as specified and directed

Supply and fix in repairs switch piano type 16 Amps flush type ,240volt AC complete all as specified and directed

Supply and fix in repairs socket outlet 2 in 1, 3/ 5 pin 16 Amps flush type complete all as specified and directed

Supply and fix in repairs switch socket combination(SSC) 2 in 1, 3/5 pin, 16 Amps flush type ,240volt AC complete all as specified and directed

Supply and fix in repairs Bell push, flush type, 6 Amp flush type, 240volt AC complete all as specified and directed

Supply and fix in repairs switch piano type two way 6 Amps flush type, 240volt AC complete all as specified and directed

Supply and fix in repairs Bell push, Modular type, 6 Amp flush type, 240volt AC complete all as specified and directed

Supply and fix in repair modular switch 1 way 6A 1 module complete all as specified and directed.

Supply and fix in repair modular switch 2 way 6A 1 module complete all as specified and directed.

Supply and fix in repair modular socket 6A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix in repair modular socket 6A /16A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix in repair modular fan regulator,120 watt - 2 module complete all as specified and directed.

Supply and fix ix in repair stepped type electronic fan regulator 120 watt ,240 olt flush type on the existing phenolic laminated sheet complete all as specified and directed

Supply and fix in repair electric bell Ding Dong, AC 230 volts complete all as specified and directed.

Supply and fix in repair Modular white cover plate with frame of following size complete all as specified and directed.

1 module

2 module

3 module

4 module

6 module

8 module

Supply and fixing replacement of RCCB 63 A , four pole, 30 mA complete all as specified and directed by Engr-in-chrge. Make: Hager/L & T/Standard

Supply and fix in industrial wall mounted plug socket suitable for IP 44 degree of protection of 32Amps rating 2P+E complete all as specified and directed. Make: L&T/Indoasian/Legrand/C&S

Supply and fix sheet metal enclosures for double door distribution board factory made duly painted of following capacity with 200 amps rated bus bar , suitable for fixing MCB /Isolators complete all as specified and directed Make:L & T/legrand/Havells or equivalent.

12 way SPN , 240V

8 way SPN 240V

4 way TPN ,415V

8 way TPN ,415V

Supply and fix MCCB 125 Amps, 4 pole, Breaking capacity 16 KA, 415 V adjustable type complete all as specified of capacity. Make: L &T /Legrand/Indoasian/standard.

Ditto item no 31 Above but of capacity 100 Amps.

Supply and fixing miniature circuit breaker (MCB) of following current carrying capacity, in the MCB DB complete with connection testing and commissioning complete all as specified and directed . Make L &T /Legrand/Havells

SP 5/6 to 32 AMP,240V, 10 KA 'B' curve

SP 40 AMP, 240V, 10 KA 'B' curve

SPN 32 Amps, 240V, 10 KA 'C' curve

SPN 40 Amps , 240V, 10 KA 'C' curve

TPN 63Amps, 240V, 10 KA 'B' curve

Taking down old unserviceable fitting and Supply and fix wall mounted extruded aluminium housing high quality indoor batten of following capacity colour temperature 6500 K (4' long) lumen 2000 -3000, PF> 0.9, THD less 15% diffused connecting with three core flexible copper wire from connecto to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge. Make : Havells/wipro/Halonix Note :- The rates are inclusive of cost of square box-02 Nos including suitable size of clamps and screws etc.

LED tubelight fitting of 20 watt/22 watt , 4 Ft long

LED tubelight fitting of 10watt, 2 Ft long

Taking down old unserviceable Tube light fitting of any type and Supply and fix wall/ceiling mounted Inverter LED tube light fitting 4' feets long with opal diffuser and having aluminium body. Energy efficient high quality invertor batten should have Lithium ion battery of 3.7V, 19 WH having inbuilt battery backup upto 2Hrs with high power brightness having BIS certification, LED fitting should be LM 80 certified with system efficacy greater than 100 lumens/watt, including LED tube 20/22 watt having colour temperature 6500 K , PF> 0.95, THD less 10%, with IP20 protection having open and short circuit protection, having input voltage range 90V to 300V connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge. Make : Havells/Jaquar/Halonix/Crompton . Note :- The rates are inclusive of cost of square box-02 nos including suitable size of clamps and screws etc.

Taking down old unserviceable fitting and Supply and fix Recess mounting LED flat panel light fitting of following wattage and size with efficient LEDs lumen 2000 -3000, PF> 0.9, THD less 15% including taking down unserviceable fitting of any type and make complete all as specified and directed . Make : Havells/wipro/Halonix

36 watt, 600mm x 600 mm size

18/20 watt, (1x1 )ft

Circular in size 18/20 watt not less then 6 '' dia

Taking down old unserviceable fitting and Supply and fix wall mounted high quality indoor wall bracket light cylinderical/oval shape aesthetically designed fitting with B22D lamp holder and 12 Watt bulb temp range 4000k to 6500 K as per site requirement connecting with three core flexible copper wire complete all as specified and directed by Engr-in-charge. Make : Halonix /Havells/wipro/Benlo

Supply and fix in repair bracket for mounting building security light made out of 40 mm dia Light Grade GI pipe bend in angle with holding MS clamps two nos each bracket of size 25x3 mm including screw etc for fixing complete all as specified and directed by Engr in charge

Material and Labour for repair and replace of unserviceable LED driver suitable for 36/40 watt LED panel light fitting (2 x 2) feets size on site complete all as specified and directed by Engr-in-Charge.

Material and Labour for earthing complete in repairs with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level connected to 4.0 mm dia galvanized earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 RCC cover 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including charcoal black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of starta complete all as shown in electrical plate No 3 as specified, GI wire suitable size and length for continuity earth wire from test point to main distribution Board complete all as directed. Note: Rate for achieving required depth by compressor machine if required is deemed included in item unit rate.

Material and Labour for repairs /re-fixing on exiting or new location to storage type electric water heater (geyser) of storage capacity 25/35/50 ltrs of any make comprising of the following works mentioned here under againt Ser Nos (a) to (f) at different locations (a) Inspection, taking down, opening ( dismantling ) descaling, brushing, cleaning of storage tank (b) Examine water tightness of storage tank after cleaning. (c) Carry out operation of all stop cocks, pressure reducing valves etc. to ensures free movement of the working parts. (d) Supply and fix Replacement of the rubber / PVC gasket to ensure water tightness. (e) Checking of safety valve (f) Testing of geysers after repairs.

Supply and fix in repairs thermal cutout ISI marked temp range 50-80/90 degree as required at site for geyser of capacity 25/35/50 Ltr of any make complete all as directed by Engr-in-charge

Supply and fix in repairs of safety valve/high pressure valve ISI marked as per site requirement or complete all as per directed by Engineer-in-Charge.

Supply and fix in repairs heating element of following rating as required at site including rubber washers complete all as specified and directed by Engr-in-charge.

1/1.5 KW,240 volt

02 KW ,240 volt

Supply and fix in repairs of PVC pipe with brass hexagonal adopters both side, suitable for 15 mm dia pipe 60 cm long for cold water connection complete all as specified and directed by Engr-in-Charge

Supply and fix ixing in repairs metal braided PVC/CP pipe with brass hexagonal adopters both side, suitable for 15 mm dia pipe 45 CM long for hot water connection complete all as specified and directed by Engineer-in-charge.

Supply and fix ixing in repairs, non return valve 15 mm dia of brass, ISI marked complete all as specified and directed by Engineer-in-charge.

Supply and fix stop valve , cast copper alloy screw down high pressure crutch handle, screwed both end for iron pipe suitable for 15 mm bore complete all as specified and directed by Engr-in-Charge

Material and Labour for repairing and replacment of unserviceable copper container of capacity 25/50 Ltrs of solar water heater of any type after completion of work testing the heater complete all as specified and directed by Engr-in-Charge

Copper container 50/100 ltr

Copper container capacity 25 Ltrs of water heater (geyser)

Taking down old unsv Ceiling /Exhaust/Air circulator fans of any type from any height and Material and Labour for rewinding of Ceiling Fan, Exhaust Fan and Air circulator of any type/make by split opening the fan carrying cutting the burnt winding and cleaning the slots and rewinding with super enamelled copper winding wire appropriate gauge including connection,capacitor base and testing complete all as specified and directed by Engr-in-Charge. Note: Bearing ,fan canopy, capacitor, down rod etc will be measured and paid separately under relevant item of schedule.

Ceiling fan of 1200/1400 mm sweep

Exhaust Fan of sweep 275-300 mm

Exhaust Fan of sweep 350-450 mm

Air circulator of sweep 350-450 mm

Supply only ball bearing (DE/NDE) to match the existing make suitable for 1200/1400 mm sweep ceiling fan including greasing complete all as specified and directed by Engr-in-Charge. Make: SKF/NBC

Supply only ball bearing suitable for 275-450 mm exhaust fan complete all as specified and directed Make : SKF/NBC

Supply only fan capacitor of following capacity

capacitor 2.5 mfd

capacitor 4 mfd

Supply only , rubber yoke, MS Clamps, bolts nuts with split pin suitable for ceiling fan 1200 /1400 mm sweep complete all as specified and as directed by Engr-in-charge.

Supply only gunmetal bush suitable size for ceiling fan 1200 /1400 mm sweep complete all as specifed and directed by Engr-in-Charge.

Supply only fan down rod of following length with white enamel painted with both side hole for hanging fan of sweep 1200/1400mm sweep complete all as specified and directed by Engr in charge

1 ft long

2 ft long

Supply only stator for ceiling fan of 1200/1400 mm sweep with silicon coating, anti rust coating, size and slot as per sample, feasible to fix in exisiting rotor size complete all as specified and directed

Supply only rotor for ceiling fan of 1200/1400 mm sweep with silicon coating, anti rust coating, size and slot as per sample, feasible to fix in exisiting stator size complete all as specified and directed

Supply only fan canopy set off white /white coloured as per colour of ceiling fan of sweep1200/1400mm complete all as specified and directed.

Supply and replace hylum sheet 3 mm thick for junction boxes, circuit boxes for various size and refixing the existing switches, sockets, regulators cut in to requied sizes including fixing with new cadmium plated screws and cup washers complete all as specified and as directed.

Material and Labour for replacement of PVC polycarbonate rectangular block for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover of following size make cutting for fixing existing switches, sockets, regulators and make necessary connection and testing complete all as specified and directed by Engr-in-Charge.

100 x 100 mm and 50 mm deep

200 x 150 x 50 mm deep

250 x 200 x 50 mm deep

150 x 150x 50 mm deep

Decarbonizing of indoor MCB DB's / Meter box panel and distribution panel of bldgs by dismantling the old MCCB's, old Bus bars , cable connections, old Amps meter and old voltmeter and cleaning the panel with ctc sovent, and removing the old/burnt control wiring, replacing the old/burnt bus bar of any size if any and fixing properly the hanging/loose front and rear opening doors of the panels, by welding of hinges including welding of broken MS sheet using extra sheets of required size also replacing burnt thimbles with new existing size thimbles, indicator lamps, including powder coating painting of panel with suitable 'U' type gasket to make it dust and vermin proof, providing fancy locks incluidng dismantling the existing connected cables and re-connecting the same cables complete all as specified and directed by Engr -in- charge.

ANUSHKA BUILDERS (BID ID -3373213)

AMAN ENGINEERING AND ELECTIRICALS WORKS (BID ID -3375798)

Priyanka Power line (BID ID -3376396)

Aziz Traders (BID ID -3376113)

SHREE VAIBHAV ELECTRICALS (BID ID -3375873)

PURVA ELECTRICALS AND ENGINEERS (BID ID -3375340)

SKS Electricals (BID ID -3375452)