Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.3 CrAdmitted-Finance 21 SWASTIK CHAMBERS GROUND FLOOR CHEMBUR MUMBAI MAHARASHTRA 400071 | MUMBAI SUBURBAN | MAHARASHTRA | 400071 | ₹3.3 Cr | L1 | Admitted-Finance |
| 2 | L2₹3.3 Cr+₹87,610 (0.27%)Admitted-Finance | ₹3.3 Cr+₹87,610 (0.27%) | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | HINDUSTAN CONSTRUCTION CORPORATION L1 | ENGINEERING CONSOLIDATED L2 |
|---|---|---|---|---|---|
| 1.00 | Fabrication, alignment, installation and erection of stainless steel-304L pipes and piping components/ fittings as per FIM and other equipment as per drawings and technical specification. The work includes preparation of fabrication drawings, isometric drawings, collection of FIM from department store, handling, transportation, storage, pickling & passivation, bending up to a bend radius of 5D using hydraulic pipe bending machine, cold bending is envisaged up to 40NB pipe size. Fabrication and erection of pipes on fabricated supports as required and Procurement and delivery of requisite materials other than free issue materials (FIM), setting up of fabrication shop at site, fabrication, laying of SS-304L piping along with Installation of other inline equipments, identification tags, on the permanent support and fittings to the required elevations/levels, taking physical measurements, checking interferences, inspection and testing, documentation, making asbuilt drawings and return of balance of FIM/scrap, following standard safety practices. Inspection & testing including Dye penetrant testing of bends and hydrostatic testing of fabricted spool pieces along with fittings as per technical specification and instructions of EIC.
Size of pipes involved are from 8NB to 250NB.
Pipes ≤1" shall be considered as 1". | 5,000 | Inch meter | 472 ₹23,60,000 | 300 ₹15,00,000 Lowest |
| 2.00 | GTA WELDING of Butt/ nozzle/ miter joints of SS 304L pipe and piping components/fittings ranging from 8NB to 250NB size using ER 308L filler wire with Argon shielding and back purging, Procurement & supply of all welding consumables other than that indicated in FIM. Dye penetrant testing of root and final pass of each weld joint as per technical specification and drawing.
Size of pipes involved are from 8NB to 250NB. Completion of activity will be considered when all related testing including Radiography are completed and accepted.
Pipes ≤1" shall be considered as 1". | 5,000 | Inch dia. | 1,180 ₹59,00,000 | 700 ₹35,00,000 Lowest |
| 3.00 | TESTING OF SS-304L BUTT WELDED JOINTS by Radiography using conventional X-ray machines/ portable Gamma ray machines, for evaluation of welded joints of SS piping at all elevations. (Repeat testing due to defective radiograph or repaired joints due to contractors fault and any additional testing necessitated due to poor workmanship or poor performance of contractor’s welders shall be done at contractor’s cost).
Arrangement of all Radiography equipment’s, tools and setting up of darkroom and pit room at the space provided at site, Supply of all consumables like films, chemicals etc. and to carryout radiography of Butt joints as identified by the EIC and development of the radiographs and its submission to department as per Tech. Specification and drawing. Re-shoots, retake, repair and 3% audit radiography joints will not be counted for measurement.
Size of pipes involved are from 8NB to 250NB. | 4,000 | Number of Exposures | 708 ₹28,32,000 | 550 ₹22,00,000 Lowest |
| 4.00 | Procurement, delivery, fabrication and instalation of SS-304L Identification tags of size 100mm (Length) x 25mm (Width) x 1 mm (Thick). Line number/ fitting designation given by the department should be engraved with 5mm Text height and highlighted with black paint. Each line tag shall be placed at a minimum of 3 locations or as per technical specification and instruction given by the EIC. | 600 | Nos. | 236 ₹1,41,600 | 200 ₹1,20,000 Lowest |
| 5.00 | Procurement, delivery, fabrication and erection of MS Structure, MS pipe supports & MS Staircase made out of different thickness of MS plates, angle, Railings, channels, box sections and welding these supports to staging members or insert plates as per technical specification and drawing. | 24,000 | KG | 188.8 ₹45,31,200 | 130 ₹31,20,000 Lowest |
| 6.00 | Procurement, delivery, Fabrication & installation of Pipe support MS plate EPS, with Supply and Fixing of Anchor Fastner of approved make (Hilty or equivalent) by drilling in concrete as per requirement for fixing Eps or other structures as per technical specifications and drawings or as directed by the EIC.
(Representative size of EP is 200X200X12MM) (Anchor fastener size M14x 150mm long). | 500 | Nos. | 2,360 ₹11,80,000 | 1,500 ₹7,50,000 Lowest |
| 7.00 | Procurement, supply, fabrication and erection of SS Pipe Supports, SS Monkey ladders, SS U- Clamps and SS Poisoning sheet made out of different thickness of SS304 plates, angle, channels, box sections and welding these supports to staging members or insert plates as per technical specification and drawing. | 3,500 | KG | 708 ₹24,78,000 | 600 ₹21,00,000 Lowest |
| 8.00 | Procurement, Supply and delivery of stainless steel-304L 100 NB 10S Welded pipe as per drawings and technical specification. | 100 | meter | 3,540 ₹3,54,000 Lowest | 4,500 ₹4,50,000 |
| 9.00 | Procurement, Supply and delivery of stainless steel-304L 150 NB 10S Welded pipe as per drawings and technical specification. | 300 | meter | 5,734.8 ₹17,20,440 Lowest | 7,500 ₹22,50,000 |
| 10.00 | Procurement, Supply and delivery of stainless steel-304L 200 NB 10S Welded pipe as per drawings and technical specification. | 200 | meter | 8,271.8 ₹16,54,360 Lowest | 11,000 ₹22,00,000 |
Tender Value
₹3.4 Cr
EMD Value
₹6.7 L
Closing Date
29 May 2023, 3:00 pmClosed
Project Director, INRPC BARC TARAPUR
Project Director, INRPC, NRB, BARC, Tarapur
Mechanical package Phase I of Block 115 at INRPC BARC Tarapur
2023_NRB_751139_1
BARCT/NRB/MPT508/2023
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
548 days
BARC, NRB, Tarapur
Please refer Tender documents
8 documents required · 8 mandatory
₹0
₹6.7 L
7 Sept 2023
2 May 2023
1 Jun 2023
2 May 2023
29 May 2023
9 May 2023
Amount
Fabrication, alignment, installation and erection of stainless steel-304L pipes and piping components/ fittings as per FIM and other equipment as per drawings and technical specification. The work includes preparation of fabrication drawings, isometric drawings, collection of FIM from department store, handling, transportation, storage, pickling & passivation, bending up to a bend radius of 5D using hydraulic pipe bending machine, cold bending is envisaged up to 40NB pipe size. Fabrication and erection of pipes on fabricated supports as required and Procurement and delivery of requisite materials other than free issue materials (FIM), setting up of fabrication shop at site, fabrication, laying of SS-304L piping along with Installation of other inline equipments, identification tags, on the permanent support and fittings to the required elevations/levels, taking physical measurements, checking interferences, inspection and testing, documentation, making asbuilt drawings and return of balance of FIM/scrap, following standard safety practices. Inspection & testing including Dye penetrant testing of bends and hydrostatic testing of fabricted spool pieces along with fittings as per technical specification and instructions of EIC. Size of pipes involved are from 8NB to 250NB. Pipes ≤1" shall be considered as 1".
GTA WELDING of Butt/ nozzle/ miter joints of SS 304L pipe and piping components/fittings ranging from 8NB to 250NB size using ER 308L filler wire with Argon shielding and back purging, Procurement & supply of all welding consumables other than that indicated in FIM. Dye penetrant testing of root and final pass of each weld joint as per technical specification and drawing. Size of pipes involved are from 8NB to 250NB. Completion of activity will be considered when all related testing including Radiography are completed and accepted. Pipes ≤1" shall be considered as 1".
TESTING OF SS-304L BUTT WELDED JOINTS by Radiography using conventional X-ray machines/ portable Gamma ray machines, for evaluation of welded joints of SS piping at all elevations. (Repeat testing due to defective radiograph or repaired joints due to contractors fault and any additional testing necessitated due to poor workmanship or poor performance of contractor’s welders shall be done at contractor’s cost). Arrangement of all Radiography equipment’s, tools and setting up of darkroom and pit room at the space provided at site, Supply of all consumables like films, chemicals etc. and to carryout radiography of Butt joints as identified by the EIC and development of the radiographs and its submission to department as per Tech. Specification and drawing. Re-shoots, retake, repair and 3% audit radiography joints will not be counted for measurement. Size of pipes involved are from 8NB to 250NB.
Procurement, delivery, fabrication and instalation of SS-304L Identification tags of size 100mm (Length) x 25mm (Width) x 1 mm (Thick). Line number/ fitting designation given by the department should be engraved with 5mm Text height and highlighted with black paint. Each line tag shall be placed at a minimum of 3 locations or as per technical specification and instruction given by the EIC.
Procurement, delivery, fabrication and erection of MS Structure, MS pipe supports & MS Staircase made out of different thickness of MS plates, angle, Railings, channels, box sections and welding these supports to staging members or insert plates as per technical specification and drawing.
Procurement, delivery, Fabrication & installation of Pipe support MS plate EPS, with Supply and Fixing of Anchor Fastner of approved make (Hilty or equivalent) by drilling in concrete as per requirement for fixing Eps or other structures as per technical specifications and drawings or as directed by the EIC. (Representative size of EP is 200X200X12MM) (Anchor fastener size M14x 150mm long).
Procurement, supply, fabrication and erection of SS Pipe Supports, SS Monkey ladders, SS U- Clamps and SS Poisoning sheet made out of different thickness of SS304 plates, angle, channels, box sections and welding these supports to staging members or insert plates as per technical specification and drawing.
Procurement, Supply and delivery of stainless steel-304L 100 NB 10S Welded pipe as per drawings and technical specification.
Procurement, Supply and delivery of stainless steel-304L 150 NB 10S Welded pipe as per drawings and technical specification.
Procurement, Supply and delivery of stainless steel-304L 200 NB 10S Welded pipe as per drawings and technical specification.
Procurement, Supply and delivery of SS 304, Ball valve, manual-lever operated, 2 piece, 2 way, full bore, soft seated, manual-lever operated, SORF flanged end connection along with companion flanges, bolts, nuts & gaskets confirming to ANSI Class-150 as per ASME B 16.34 of following sizes and as per tender specifications.
Procurement, Supply and delivery of SS 304, Ball valve, Pneumatically operated, 2 piece, 2 way, full bore, soft seated, pneumatically operated, SORF flanged end connection along with companion flanges, bolts, nuts & gaskets confirming to ANSI Class-150 as per ASME B 16.34 of following sizes and as per tender specifications.
Procurement, Supply and delivery of SS 304, Socket ended Needle valve of reputed make with operating pressure 150 psi and as per tender specifications
Procurement, Supply and delivery of SS 304 Non return valve, butt ended with 150 psi operating pr. of following sizes andd as per tender specifications
Manufacturing, Inspection,testing (including third party inspection) at suppliers works, marking, packing, procurement, supply and delivery of SS 304L pipe Elbows (as per ASTM A 403 with LR, butt ends of following sizes and as per tender specifications
15 NB Sch. 40
25 NB Sch. 40
50 NB Sch. 40
80 NB Sch. 10
100 NB Sch. 10
150 NB Sch. 10
200 NB Sch. 10
Procurement, Fabrication, supply and delivery of SS 304L pipe concentric reducers (Sch 10) as per ASTM A 403 with butt ends of following sizes and as per tender specifications
200 NB x 150 NB
Procurement, Fabrication, supply and delivery of SS 304L SORF flanges, 150 psi with SS nut, bolts, washers of following sizes and as per tender specifications
Procurement, Fabrication, supply and delivery of SS 304L Blind flanges, 150 psi with SS nut, bolts, washers of following sizes and as per tender specifications
Procurement, Fabrication, supply and delivery of SS 304L Equal Tees (90 degree) with butt ends of following sizes and as per tender specifications.
15 NB Sch. 40
25 NB Sch. 40
50 NB Sch. 40
80 NB Sch. 10
150 NB Sch. 10
200 NB Sch. 10
Procurement, Fabrication, supply and delivery of SS 304L Unequal Tees (90 degree) of Sch 40 with butt ends of following sizes and as per tender specifications.
25 NB X 15 NB Branch
Procurement of material, Fabrication, Inspection, Testing, Supply and delivery of SS Strainers of following sizes as per tender drawing & specifications.
Procurement of material, Fabrication, Inspection, Testing, Supply and delivery of 15 NB SS Orifice of following sizes as per tender drawing & specifications.
ENGINEERING CONSOLIDATED
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.91 MB
BOQ_789855.xls
BOQ • 0.27 MB
technical_bid_MPT_508.xls
Additional Documents • 0.05 MB
TENDER.pdf
Tender Documents • 10.99 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .