Karnataka

Active

Works

Buildings

CONSTRUCTION OF ANGANWADI BUILDING AT DONABAGGAT GP DONABAGATTA-4 VILLAGE BHADRAVATHI TALUK

Rural Development and Panchayat Raj Department

RDPR Division Office Shivamogga | Shivamogga, Karnataka

Amount: ₹10.0 LCloses: 8 Oct 2026

Timeline

Published23 Sept 2026
Closes8 Oct 2026
Bid Opening9 Oct 2026

Tender Value

₹10.0 L

EMD Value

₹25,500

Closing Date

8 Oct 2026, 4:00 pm

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

B N MANJUNATH

Office Number

Mobile Number

Work Description

CONSTRUCTION OF ANGANWADI BUILDING AT DONABAGGAT GP DONABAGATTA-4 VILLAGE BHADRAVATHI TALUK

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT28169

Reference Number

RDPR/2026-27/BD/WORK_INDENT28169

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

RDPR Division Office Shivamogga

Source Website

Subscribe to view

Documents Required

4 documents required · 4 mandatory

Technical Bid

RequiredGST Registration Certificate

RequiredValid Registration Certificate.

RequiredAnnual Turn Over Certificate

RequiredStatement indicating the Details as Per Sec-3 of Clause 1.3 A And B i,e Works On Hand

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Conditional Tenders will not be accepted.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

As per Karnataka State Government order No.LD 300 LET 2006 Bangalore Dated 01/01/2007 and Government Letter No.PW 134 BMS 2007 Dated 27/7/2007 a sum amounting to 1 percent of the bill amount will be deducted towards Construction Labour Welfare fund.

The tenderer should quote his rates with all lead and lifts, loading and unloading including cost of labour, hire charges of machinaries and other incidental charges etc complete as per specification and directions of the Engineer incharge of the work.

The bidder shall bear all costs associated with the preparation and submission of each tender and the employer will in no case be responsible and liable for those costs. The department is not responsible for any delay in accessing e-procurement portal

Contractors should have to upload the scanned copy of all necessary qualification documents, and submit the original documents certificates after opening the tender for evalution and verification

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders The departments shall not be responsible for non accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end.

All materials required for the work shall be procured by the tenderer himself and should be got tested by the quality control authorities at his own cost before use on work.

Within 20 days of receipt of Letter of Acceptance, the successful Tenderer shall deliver to the employer a Security Deposit in the form of NSC/DD/ FDR in favor of the Executive Engineer, P.R.E. Shivamogga, for an amount equivalent to 5 percent of the Contract price plus additional security for unbalanced tenders in accordance with the conditions of contract.

Successful Bidder shall pay Contract Management Module processing fees of 0.025 percent of the contact value (Min Rs.500/- and Max Rs.7500/-) when bills are raised using Contract Management Module.

Self declaration of machineries are not accepted

Third party inspection is mandatory for all the works in this programme.

The Employer reserves the right to reject any or all tenders without assigning reason.

Tenderer must submit his present accurate postal address and phone / cell phone number And Valid E-mail.

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer is final.

The Furnished E.M.D. will be released only after successful execution of the Tender Agreement by the successful Tenderer or bid validity days from the date of submission of Tender whichever is earlier.

The successful tenderer shall maintain the work during the defect liability period of 1 year from the date of completion of the work

The Tenderer at his own responsibility and risk is encouraged to visit and examine the Site of Works and its surroundings and obtain all information that may be necessary for preparing the Tender and entering into a contract for construction of the Works. The cost of visiting the Site shall be at the Tenderer own expense

All other conditions and requirements has to be fulfilled as per the KW Standard Bid Document.

It is to be noted that any false documentation found to be uploaded, action may attract punitive measures such as Blacklisting, Cancellation of Registration etc

It is to be noted that any false documentation found to be uploaded, action may attract punitive measures such as Blacklisting, Cancellation of Registration etc.

The work shall be inspected by the Third Party and the bill shall be admitted only after the satisfactory quality reports from the Third Party

All safety precautions, warnings, signs, deployment of security guards have to be ensured so that no untoward incident happens on account of negligence or any project activity.

All materials required for the work, shall be procured by the tenderer himself and should be got tested by the Department quality control authorities at his own cost before use for the work. If employer wishes to engage third party inspecting agency for the said work, apart from the quality control authorities, then the contractor should cooperate with the third party for test

In the case of death of the contractor after executing the agreement/ commencement of the work, his legal heir, if is an eligible registered contractor and is willing, can execute and complete the work at the accepted tender rates in the same terms and conditions of the contractor of the work

Corrigendum/Modifications/Corrections if any will be published in the KPPP website only

The work should be executed as per the KTPP Act.

The work should be completed within the stipulated time period from the date of issue of work order including Rainy Season.

As Per Govt Order No: DMG/SG/BUD/KRIDE/2025-26 Dt: 12.11.2025. All the works excuting departments shall make it mandatory in their tender document for their contractors to obtain Mineral Dispatch Permit (MDP) from Mines & Geology Department For the use of minor minerals in Government Works. And accordingly, the Additional Chief Secretary/ Principal Secretary / Scretary to the Government of all the Departments shall issue direction to all the Govenment works excuting departments under them . And The same MDP shall be submitted by the contractors along with the bills to the work executing department for proving the payment of Royalty and other fees.

If the documents uploaded on the KPP portal are found to be fake, their EMD will be confiscated and a recommendation will be made to the competent authority to cancel the contract.

Technical Criteria

General

Total value of civl engineering works executed and payments received in the last five years (year-wise)

Past Experience

The bidder must submit last 5 years Profit and loss account obtained from Chartered Accountant (CA) Only.

Audited CA Certificate of Annual Turnover

Capabilities of Vendor

Statement indicating the (A)Existig commitments and ongoing works, (B)Details of works for which tenders are already submitted . The statements should furnished as per statement 1.3 (A),(B) of Section 3 of Qualification information in Standard Tender document.

Others -- Works on hand

The Tenderer should possess valid Registration Certificate.

PWD Registration Certificate (Class I/II/III/IV)

Financial Status

To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e., 2021-22-2025-26) Achieved in at least Two financial year (i.e. 2021-22 to 2025-26) a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 10.01 Laksh

Audited CA Certificate of Annual Turnover

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹25,500

Important Dates

Last Activity

23 Sept 2026

Published

23 Sept 2026

Bid Opening

9 Oct 2026

Download Ends

7 Oct 2026

BOQ Preview

•

CONSTRUCTION OF ANGANWADI BUILDING AT DONABAGGAT GP DONABAGATTA-4 VILLAGE BHADRAVATHI TALUK

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

•

Providing & fixing of 2-track x 2-panel sliding windows made out of multichambered UPVC (Matching to RAL-9016) sections and with minimumTiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

•

Providing 20 mm cement plaster of mix :1:3 (1 cement: 3 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggreegates and fine aggregates as per relevent I...

•

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

•

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work...

•

Painting with synthetic enamel paint of approved brand and manu- facture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of app...

•

Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...

•

Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approvedmake in all colours, shades except burgundy, bottle gree...

•

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings [ PWD S R 2023-24 V-2 Page No 133 Item No.14.8 ]

•

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operation...

•

Providing and fixingfactory made PVC door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 Nos of 150mm long bracket...

•

Providing & fixing 30mm thick factory made rigid foam Prelam PanelledDoor Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and15x15mm for top & bottom rails, covered with heat moulded Prel...

•

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

•

Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore, 86 mm long, weighing not less than 88 g.(P.NO. 118 /13.17.1/P.W.D.SR/). Volume 2

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVCplain & brass threaded fittings, including fixing the pipe with...

•

Providing and placing on terrace (at all floor levels) polyethylenewater storage tank, IS : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and ov...

•

Providing 1 Cudddapah slab 2.5cms thick (P.NO. A-19 /SL.no 261 P.W.D.SR/). Volume 2

•

1.2 Concealed Conduit System Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before ...

•

Supplying and fixing PVC/metal conduit Deep junction box1 9/20 mm deep junction box (P.NO. 1/1.5.1/electrical items/).

•

Point wiring using Copper wire with switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm 2(Phase & Neutral)& 1x1.0 mm2 (Earth wire) FRLS multi strand ...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying capacitor type ceiling fan complete with down ro blades, shackle, canopies etc, for operation on 230 V, 50 cyclesSingle phase AC supply conforming to ISS-374- 1979 and witdouble ball bearing...

•

Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power fact...

•

upplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete (P.NO. 3/1.6.1/el...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and flush mounting powder coated/galvnized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/CC wall (P- 5...

•

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 (P- 5, INo.- 3.6.1) (ELE SR )6 Amps one way

•

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 (P- 5, INo.- 3.6.1) (ELE SR )6 Amps 2 way

•

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 (P- 5, INo.- 3.6.1) (ELE SR )steeped fan

•

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 (P- 5, INo.- 3.6.1) (ELE SR )tv

•

Supplying and fixing regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCBs single phase/3 pha...

•

Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete.[PWD SR2023-24/ Page No.55/Sl. No. 8.84 Volu...

•

Providing and fixing perforated Reinforced concrete rings 1500mm inner dia and 300mm height including transporting and levelling charges RWS & S circle 2019-20 ( Sl No 11.2 Page No 116 )

•

Supply, delivery, erection and commissioning at site ELCB suitable for monoblock centrifugal pump confirming with ISI mark and its latest amendments[ PWD SR 2023-24 V-5 Page No 158 Item No. 13.45 ]

•

Printing new letter and figures of any shade with synthetic

•

enamel paint black or any other approved colour to give an

•

even shade per cm height per letter English and Roman [ PWD SR 2023-24 V-3 Page...

•

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing[ PWD SR 2023...

•

Providing and fixing Sink cock with swivel spout & wall flange, wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class [ PWD SR 2023...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw1.doc

Tender Document • 0.17 MB

2025-26 ICDS ANGANAVADI OM.pdf

Tender Document • 1.98 MB

Donabagatta AWC 4.pdf

Tender Document • 4.59 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

Active

Works

Buildings

CONSTRUCTION OF ANGANWADI BUILDING AT DONABAGGAT GP DONABAGATTA-4 VILLAGE BHADRAVATHI TALUK

Rural Development and Panchayat Raj Department

RDPR Division Office Shivamogga | Shivamogga, Karnataka

Amount: ₹10.0 LCloses: 8 Oct 2026

Timeline

Published23 Sept 2026
Closes8 Oct 2026
Bid Opening9 Oct 2026