Construction of Warehouse 500 MT (278.00 Sq. Mtr.), Shed for Cleaning, Grading Unit, Aata Mill, Dal Mill 222.96 Sq. Mtr., Poultry and Cattle Feed Manufacturing Shed for Animal Feed Unit 222.84 Sq. Mtr.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means SSR OF 2022-23 ITEM NO. 21.02 & PAGE NO.153

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means SSR OF 2022-23 ITEM NO. 21.06 & PAGE NO.153

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. SSR OF 2022-23 ITEM NO. 21.4 & PAGE NO.157

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. SSR OF 2022-23 ITEM NO. 21.36 & PAGE NO.157

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm. to 20cm. including watering and compaction etc. complete. SSR OF 2022-23 ITEM NO. 21.37 & PAGE NO.157

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade) SSR OF 2022-23 ITEM NO. 24.01 & PAGE NO.175

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 0.5 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. SSR OF 2022-23 ITEM NO. 21.24 & PAGE NO.156

Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade ) SSR OF 2022-23 ITEM NO. 25.11 & PAGE NO.178

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade ) SSR OF 2022-23 ITEM NO. 24.08 & PAGE NO.176

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR OF 2022-23 ITEM NO. 25.31 & PAGE NO.179

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade ) SSR OF 2022-23 ITEM NO. 25.5 & PAGE NO.181

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade ) SSR OF 2022-23 ITEM NO. 26.05 & PAGE NO.184

Providing and casting in situ cement concrete M-20 of trap/Granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as CUM per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and 7 curing etc. complete, (Excluding reinforcement and structural steel) With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Bd. F.8 Page No.302 and B.7, Page No.38

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.SSR OF 2022-23 ITEM NO. 26.33 & PAGE NO.188

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. SSR OF 2022-23 ITEM NO. 27.01 & PAGE NO.197

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. SSR OF 2022-23 ITEM NO. 23.04 & PAGE NO.173

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. SSR OF 2022-23 ITEM NO. 23.01 & PAGE NO.173

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete SSR OF 2022-23 ITEM NO. 27.05 & PAGE NO.197

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 6248-1979) (Without mechanical gear) SSR OF 2022-23 ITEM NO. 39.24 & PAGE NO.248

Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing without hot dip zinc coating including fabricating glazing with plain / obscured glass panes and approved type and quality and iron oxidized fixtures and fastening oil paint two coats etc. complete. SSR OF 2022-23 ITEM NO. 39.29 & PAGE NO.249

Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete. SSR OF 2022-23 ITEM NO. 33.3 & PAGE NO.216

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR OF 2022-23 ITEM NO. 32.04 & PAGE NO.209

Providing internal cement plaster 20mm thick in single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. SSR OF 2022-23 ITEM NO. 32.07 & PAGE NO.209

Providing and laying machine cut machine polished shahabad Stone slabs 20 to 25mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. SSR OF 2022-23 ITEM NO. 33.17 & PAGE NO.214

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. SSR OF 2022-23 ITEM NO. 32.11 & PAGE NO.209

Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.)for roofing without wind tiles including fastening with galvanised iron screws & bolts, lead & bitumen washers as per drawing etc. complete.(Weight of 5.5 kg/sq.m.). SSR OF 2022-23 ITEM NO. 38.04 & PAGE NO.233

Providing and fixing 12 mm dia. mild steel barupto 0.5 M. length for anchor rods with necessary threading nuts and bolts etc. complete. SSR OF 2022-23 ITEM NO. 38.32 & PAGE NO.236

Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. SSR OF 2022-23 ITEM NO. 35.07 & PAGE NO.223

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 6248-1979) (With mechanical gear) SSR OF 2022-23 ITEM NO. 39.25 & PAGE NO.249

Providing and fixing crimped wire G.I. mesh of size 20mm x 20mm 10 guage to iron angle frame including welding crimp mesh to angle frame and steel flat, fixing the frame in its original position and oil painting etc. complete. (excluding cost of structural steel) SSR OF 2022-23 ITEM NO. 44.21 & PAGE NO.295

Providing and applying washable oil- bound distemper of approved color and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces.(excluding the primer coat.) etc. complete. SSR OF 2022-23 ITEM NO.36.11& PAGE 227

Providing and applying three coats of waterproof cement paint of approved manufacture and of approved color to old plastered surfaces including

scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. Spec. No. :Bd o.8/Page no. 406

Providing and fixing of color coated Zinc aluminium (R)AZ1 50(min150gms/sq.mt. total one a chside) profiled sheets for roofing.The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness(BMT)(0.5mmTCT),Hi- strength steel with min.550MP a yield strength, metallic hot di p coated with Aluminium- Zincalloy (55% aluminiumm 43.4% zinc1.6% silicon) with COLOR BOND(R)steel quality super durable polyester paint coat (with in organic pigment).The paint shall have a total coating thickness of nominal 35um,comprising of nominal 25um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950- 1050 mm effective cover width and nominal 25- 30 mm deep ribs with subtle square fluting in the five panat nominal 180-250 mm center-to- center. The end rib shall be designed foranti- capacity groove. And return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fastener s with min.fastened with min.25um Zinc- Tinalloy coated, Hexhead, self- drilling screw etc. complete. (weight of profile 4.52 Kilogram /One Square Metre) 900mm girth (Surface Width).

Providing and fixing of colour coated Zinc aluminium (R)AZ 150 (min150gms/sq.mt. total on each side) profiled sheets for roofing. The feed material is manufacture dout of nominal0.45 mm Base Metal Thickness(BMT)(0.5mmTCT),Hi- strength steel with min.550 MP a yield strength, metallic ot dip coated with Aluminium- Zincalloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLOR BOND(R)steel quality super durable polyster paint coat (with in organic pigment).The paint shall have a total coating thickness of nominal 35mm,comprising of nominal 25 mm ex terior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950- 1050 mm effective cover width and nominal 25- 30 mm deep ribs with sublet square fluting in the five panat nominal 180-250 mm center-to- center. The end rib shall be designed for anti- capacity groove. And return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25um Zinc- Tin alloy coated, Hex head, self- drilling screw etc. complete. (weight of profile 4.52 Kilogram /One Square Metre) 600mm girth (Surface Width).

Supplying, erecting & terminating XLPE armoured cable 4 core 25 sq. mm, aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench pipe. CSR 2019-20 Item NO 7-1-30 Additional specification No CB-LT/AL

Royalty charges as per statement attached For sand For other minerals