Work of Supply, Erection, Testing and Commissioning of 200KVA distribution transformer center at Ravalnath Nagar, Corlim

Amount

Cost of Material

Supply of 11kV pin insulator with HDGI pin

Supply of 11KV/LT HDGI stay set complete with HDGI stay rod and HDGI plate, break insulator 8KV, HDGI stay clamps, HDGI nut bolts and HDGI stay wire 7/10 swg etc.for 11 mtrs long pole

Supply of HDGI pipe 8 ft long 40 mm dia class B, fabricated and perforated confirming to I.E. rules of 1956 along with charcoal and salt 10Kgs each per earthing pit to get required earth resistance as per enclosed specification for providing Earthing as per IS 5043/1966.

Supply of HDGI nuts and bolts

Providing Enamelled danger board of size 250mm x 200mm

Providing Anticlimbing device

Supply of HDGI structural Material of various section as per specifications

Supply, providing and construction of Cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size for foundations. 0.54 Cu. Mts. per RMU / LBS inclusive of laying in position

Supply of 11 KV 400 amps GOAB switch

Supply of 11 KV 200 amps H.G fuse

Supply of 9 KV 5KA lightning arrestor

Supply of Distribution tranformer metering unit

Supply of CAMR modem (Qued band GPRS/GSM /850/900/1800/1900MHZ, capacity 6KV RAM processor and 4GB memory)

Supply of HDGI Xarm clamps for 11 mtrs long RCC for SA

Supply of HDGI Xarm clamps for 11 mtrs long RCC for LA

Providing of Sand for cushioning of the cables in the trench inclusinve of laying in the trench

Supply, providing and fixing of RCC protective covers of size 600mm long x 250mm width and 50mm thick capable of bearing load of 135kgs and covered with earth / sand upto depth of 0.15mtrs confirming to IS 1255 - 1967 at non road crossing

Supply of XLPE cable armoured 3½ C 120sqmm 1.1kV grade

Supply of XLPE single core unarmoured XLPE 300sqmm 1.1kV grade

Supply of XLPE cable 11kV 3C 95sqmm 1.1kV grade

Supply of XLPE cable 11kV 3C 300sqmm armoured

Supply of HDGI pipe 100mm class B

Supply of Heat Shrinkable 11kV termination kit indoor 50 to 95 XLPE

Supply of Heat Shrinkable 11kV termination kit outdoor 50 to 95 XLPE

Supply of Heat Shrinkable 11kV termination kit indoor 240 to 300 XLPE 3C

Supply of Heat Shrinkable 11kV termination kit outdoor 240 to 300 XLPE 3C

Supply of FRP fencing complete with gate as per specification for distribution transformer (size 3mx3mx2m) with concreating for FRP fencing supports with plinth (0.3x0.3x0.5) cu.mts x 12 nos each ratio 1:3:6

Supply of 11 KV 50Hz, 630A, outdoor SF6 Ring Main Unit with two load break switches and one 630A Circuit Breaker complete as per technical specification

Supply of 11 KV 50Hz, 630A, outdoor SF6 Ring Main Unit with three load break switches complete as per technical specification

ERECTION , TESTING & COMMSIIONING of

Erection, Testing and Commissioning of RCC Poles 11mtrs long CEE/E-698, R3

Erection, Testing and Commissioning of 11kV pin insulator with HDGI pin

Erection, Testing and Commissioning of 11KV/LT HDGI stay set complete with HDGI stay rod and HDGI plate, break insulator 8KV, HDGI stay clamps, HDGI nut bolts and HDGI stay wire 7/10 swg etc.for 11 mtrs long pole

Providing Earthing as per IS 5043/1966. including supply, erection, testing and comm. of HDGI pipe 8 ft long 40 mm dia class B, fabricated and perforated confirming to I.E. rules of 1956 including alternate layers 30cm thick of charcoal, salt and earth (charcoal and salt 10Kgs each per pit) inclusive of earthwork excavation of size 0.50x0.50x2.5m, backfilling and spreading of excavated earth evenly toget required earth resistance as per enclosed specification

Fixing of HDGI nuts and bolts of various sizes

Erection, Testing and Commissioning of ACSR 'WEASEL' CONDUCTOR 6/1/2.59 (nominal aluminium area 30mmsquare) (139amp max at 45degreeC) for earthing

Installing Enamelled danger board

Installing Ancticlimbing device

Fixing HDGI structural Material

Erection, Testing and Commissioning of 11 KV 400 amps GOAB switch

Erection, Testing and Commissioning of 11 KV 200 amps H.G fuse

Erection, Testing and Commissioning of 9 KV 5KA lightning arrestor

Erection, Testing and Commissioning of 200KVA 33/0.4KV Distribution Transformers level II losses, Alluminium winding, with Bimetallic terminal connectors, energy efficiency level II as per IS 1180 (part I) 2014

Erection, Testing and Commissioning of distribution boxes (MS) with 400amps MCCB and kit kat fuses.

Erection, Testing and Commissioning of Distribution tranformer metering unit

Erection, testing and Commissioning of CAMR modem (Qued band GPRS/GSM /850/900/1800/1900MHZ, capacity 6KV RAM processor and 4GB memory)

Fixing, Testing and Commissioning of HDGI Xarm clamps for 11 mtrs long RCC for SA

Fixing of HDGI Xarm clamps for 11 mtrs long RCC for LA

Earth work excavation in foundation trenches or drain including opening of roads, chamber, pavements and soiling, ramming, leveling of bottoms, making bottom free from stones including removing out the excavated soil/ material as directed in any type of soil including hard laterite.

Back Filling of the available excavated earth (excluding rock) in trenches, plinth, sides, foundation etc. in layer work exceeding 0.2 mtr. depth consolidating each deposited layer by ramming and watering.

Laying, Testing and Commissioning of XLPE cable armoured 3½ C 120sqmm 1.1kV grade

Laying, Testing and Commissioning of XLPE single core unarmoured XLPE 300sqmm 1.1kV grade

Laying, Testing and Commissioning of XLPE cable 11kV 3C 95sqmm 1.1kV grade

Laying, Testing & Commissioning of XLPE cable 11kV 3C 300sqmm armoured cable as per technical specification

Laying, Testing & Commissioning of HDGI pipe 100mm class B

Erection, testing and Commissioning of Heat Shrinkable 11kV termination kit indoor 50 to 95 XLPE

Erection, testing and Commissioning of Heat Shrinkable 11kV termination kit outdoor 50 to 95 XLPE

Erection, testing and Commissioning of Heat Shrinkable 11kV termination kit indoor 240 to 300 XLPE 3C

Erection, testing and Commissioning of Heat Shrinkable 11kV termination kit outdoor 240 to 300 XLPE 3C

Erection, testing and Commissioning of FRP fencing complete with gate as per specification for distribution transformer (size 3mx3mx2m) with concreating for FRP fencing supports with plinth (0.3x0.3x0.5) cu.mts x 12 nos each ratio 1:3:6

Erection, Testing & Commissioning of 11 KV 50Hz, 630A, outdoor SF6 Ring Main Unit with two load break switches and one 630A Circuit Breaker complete as per technical specification

Erection, Testing and Commissioning of 11 KV 50Hz, 630A, outdoor SF6 Ring Main Unit with three load break switches complete as per technical specification

BAGKIYA CONSTRUCTIONS PVT LTD