DAY TO DAY REPAIR OF B/R E/M COMPLAINTS OF MD ACCN AND OTM ACCN RECEIVED THROUGH ONLINE COMPLAINT MANAGEMENT SYSTEM AND COMPLAINT REGISTER AT SUNJUWAN, MIRAN SAHIB AND DAMANA MIL STN UNDER AOR OF GE JAMMU

NOTE :- 1. All work will be carried out upto 4th Storey of bldgs which include necessary formwork and scaffolding required as per site conditions and no extra payment shall be made on this account. 2. The complaints are required to be attended/cleared on the same day of the reporting. However in exceptional case, if any complaint counld not be attend on the same day, the same will be cleared within 48 hours of the reporting. if contractor fails to attend/clear the complaint within 48 hours a penalty of RS 100/- per complaint per day will be imposed till the completion of complaint and recovery amount will be deducted from the RAR submitted by contractor. 3. A proper record of complaints will be maintained by the concerned JE duly signed by contractor.

S&F in repair Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses complete all as specified and as directed.

Supply and fixing in repair wall mixer non telephonic shower arrangement with connecting legs and wall flanges, cast copper alloy, chromium plated, complete all as specified and as directed.

S&F in repair Wall Mixer 3-in-1 System with Provision for both Hand Shower & Overhead Shower Complete with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Flanges (without Hand & Overhead Shower) complete all as specified and as directed.

S&F in repair Sink Mixer swan neck with Swinging Spout (Wall Mounted Model) with Connecting Legs & Wall Flanges complete all as specified and as directed. .

S&F in repair 15 mm bore bib taps long nose/long body, cast copper alloy CP fancy type with capstan head handle screwed down, screwed for brass, weight not less than 450 gms ferrule and fixed complete all as specified and as directed.

S & F in repair CP brass bib taps with wall flange 15mm fancy type Chromium Plated cast copper alloy with quarter turn handle and wall flange complete all as specified and as directed.

S&F in repair angle cock with wall flange, cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, complete all as specified and as directed.

S&F in repair 15mm bore CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fixing in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F in repairs CP jet spray with flexible pipe n.less than 90 cm long fixed to EWC suitable for 15mm bore complete all as specified and as directed.

S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F in repair Chromium plated, towel ring, complete all as specified and as directed.

S&F in repair chromium plated towel rack 600mm long without lower hangers,Stainless steel complete all as specified and as directed.

Supply and fixing in repair soap dish steel chromium plated 100 mm size complete all as specified and as directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F in repair Corner Glass Shelf 5.5 mm thick chromium plated guard and railing(with Bracket) complete all as specified and as directed.

S&F in repair wash hand basin waste coupling of chromium plated brass 32/40 mm dia with long screwed shank and fly nuts complete as suitable for wash hand basin complete all as specified and as directed.

S&F in repair sink waste coupling of chromium plated brass 100/110 mm dia with long screwed shank and fly nuts complete all as specified and as directed.

S&F in repair PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore complete all as specified and as directed.

S&F in repair PVC connection 15 mm x 600 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore complete all as specified and as directed.

S&F in repair Brass chromium plated shower rose with or without swivel joints, 125mm size, including connecting SS pipe and fixing to steel pipe or union complete all as specified and as directed.

S&F in repair Vitreous China, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass complete all as specified and as directed.

S&F in repair Half stall Urinal with complete accessories Set, cp waste cuppling, waste pipe, CP spreader etc. Size: 375 x 390 x 590mm complete all as specified and as directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level,white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, fixing in repair, complete all as specified and as directed by Engineer-in-charge.

S & F in repair Vitreous china Water closet pedestal pattern cascade type with in built flushing cistern and seat cover with complete fitting complete all as specified complete all as specified and as directed.

S&F in repair WC Orissa pattern white with integral foot rest 580x 440 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified.(Rate of including in taking out and removal of old WC seat unhygienic condition) complete all as specified and as directed.

Supply and fixing in repair sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 610mm x 460mm bowl size 560mm x 410mm x 200mm complete with CP waste coupling & PVC waste pipe complete all as specified and as directed.

Supply and fixing in repairs sinks with drainage board made of stainless steel 1mm thick in kitchen with plugs, washers and waste, including bedding in cement mortar on wall including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

S & F in repair Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partions as per sample. The over all size (39"x30"x10") fixed with steel fastners or steel screw complete all as specified and as directed.

Supply and fixing in repair, brass face/Spindle as per sample for CP/Brass Bib tap, Angle/Stop cock, Pillar cock, wall mixer, WHB mixer, concealed stop cock etc for 15 mm bore pipe complete all as specified and as directed.

All as per Srl Item No 33 but spindle for long body concealed stop cock complete all as specified and as directed.

S&F in repairs 20 mm dia Curtain rails,18 guage, mild steel, chromium plated with fixing brackets, stops, rollers,wall to wall, finials of 75 mm dia on both sides each and every 01 RM of length and as per site requirement and necessary fittings complete all as specified and as directed.

S&F in repair stainless steel lock grating plain/hole size 100 mm dia including embeding in tiles with white cement complete all as specified and as directed.

Supply and fixing in repair PVC Waste pipe 32mm bore of required length complete all as specified and as directed.

Supply and fixing in repair PVC Waste pipe 32/40mm dia for urinal of required length complete all as specified and as directed.

S&F in repair flushing cistern syphon kit complete all as specified and as directed.

S&F in repairs Bip tap standard of PTMT any colour screwed for iron pipe and fixed of 15mm dia bore including necessary fittings complete all as specified and as directed.

Supply and fixing in repair 1000 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including 20 mm float valve (PVC) and 02 no's GI tank nipple complete all as specified and as directed.

Supply and fixing in repair 500 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including 20 mm float valve (PVC) and 02 no's GI tank nipple complete all as specified and as directed.

Material and labour for cleaning of water storage tank 500 litres capacity completely by removing all scale dirt / dust of any description with chlorine complete all as directed at site including taking down and refixing of tank at the same place, any damage will be rectified by the contractor at his own risk and cost complete all as specified and as directed.

Material and labour for cleaning of water storage tank 1000 litres capacity completely by removing all scale dirt / dust of any description with chlorine complete all as directed at site including taking down and refixing of tank at the same place, any damage will be rectified by the contractor at his own risk and cost complete all as specified and as directed.

Supply and fixing in repair 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

All as per Srl Item No 45 but 25 mm dia complete all as specified and as directed.

Supply and fixing in repair Ball valves/float valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 15 mm bore pipe including making connections complete all as specified and as directed.

All as per Srl Item No 47 but 20 mm dia all complete all as specified and as directed.

All as per Srl Item No 47 but 25 mm dia complete all as specified and as directed.

S&F in repair MS peg set of six power coated as approved by GE complete all as specified and as directed.

Supply and fixing in repairs PVC over head tank cover / lid of size suitable for capacity of above 500 litres and upto 1000 litres capacity complete all as specified and as directed.

Supply and fixing in repair tubes 'medium grade' galvanised, 15 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed.

All as per Srl Item No 53 but 20 mm dia complete all as specified and as directed.

All as per Srl Item No 53 but 25 mm dia complete all as specified and as directed.

Supply and fixing fittings in repair for steel tubing galvanised, 15 mm bore, such as bends, tees, elbows, unions, short pieces,connectors, back nuts, etc complete all as specified and as directed.

Supply and fixing fittings in repair for steel tubing galvanised, 20 mm bore, such as bends, tees, elbows, unions, short pieces,connectors, back nuts, etc complete all as specified and as directed.

Supply and fixing in repair fittings for steel tubing galvanised, 25 mm bore, such as bends, tees, elbows, unions, short pieces,connectors, back nuts, etc complete all as specified and as directed.

S&F in repair continuous (piano) hinges,Width of flaps (when open) 30 mm heavy duty mild steel, bright finish or electrogalvanised sutable for 19mm thick shutter and fixed, complete all as specified and as directed.

S&F in repair butt hinges of mild steel cold rolled medium weight of size 100mm complete all as specified and as directed.

S&F in repair extruted Aluminium alloy handles fabricated type anodised 150 mm long complete all as specified and as directed.

S&F in repair extruted Aluminium alloy handles fabricated type anodised 125 mm long complete all as specified and as directed.

S&F in repair 150 mm long aluminium anodised barrel tower bolt of extruted section complete all as specified and as directed.

S&F in repair 200 mm long aluminium anodised barrel tower bolt of extruted section complete all as specified and as directed.

S&F in repair 300 mm long dia aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section complete all as specified and as directed.

S&F in repair floor door stopper of aluminium alloy body and tongue 140 mm anodised with hard drawn steel spring fixed in floor complete all as specified and as directed.

S &F in repairs mild steel Helical door spring of size 300 mm at site including welding to steel chowkhats, complete all as specified and as directed.

S & F in repair hasp & staple safety type aluminium anodised with mild steel hinges Spin including bolt to hinges plate fixed with screws of 75 mm in length complete all as specified and as directed.

M&L in repair 50 mm magnetic catches with brass body and striking plate including letting in as fixed complete all as specified and as directed.

S & F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

S&F in repair aluminium bottom door seal with brushes,(Snake guard) length 1.2 mtr, fix with screw, suitable for wooden door complete all as specified and as directed.

S&F in repair aluminium extruded section body, door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S& F in repairs double action floor spring hydraulically regulated, made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govrning pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

Hacking out old broken glass (any thickness,size quality or description) from any types of wooden/steel/alum (up to 4th storey) frames or stone concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding), complete all as specified and as directed.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of /Steel/Wood/Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding), complete all as specified and as directed.

Supply and fixing in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified fixed with stainless steel wire staples complete all as specified and as directed.

Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings like bend,branch pieces, connectors, heel rest bend etc and removing from site complete all as specified and as directed.

Supply and fixing UPVC (SWR) type B pipes 110 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed.

Supply and fixing UPVC(SWR) type B pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed.

Supply and fixing, UPVC (SWR) , bends for 75 mm bore , complete all as specified and as directed.

Supply and fixing, UPVC (SWR) , bends with access door for 75 mm bore , complete all as specified and as directed.

Supply and fixing, UPVC(SWR) , bends for 110 mm bore complete all as specified and as directed.

Supply and fixing, UPVC(SWR) , bends with access door, for 110 mm bore complete all as specified and as directed.

Supply and fixing, UPVC branch piece, single (single 'Y') with access door for 75 mm bore complete all as specified and as directed.

Supply and fixing, UPVC branch piece, single (single 'Y') with access door for 110 mm bore complete all as specified and as directed.

Supply and fixing, UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 75 mm bore , complete all as specified and as directed.

Supply and fixing, UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 110 mm bore , complete all as specified and as directed.

S&F UPVC (SWR) , reducers 110 mm dia complete all as specified and as directed.

S&F UPVC (SWR) vent cowl 75 mm dia complete all as specified and as directed.

Supply and fixing in repair UPVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F in repair, UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

Supply and fixing in repair Urinal spreader cast copper alloy, chromium plated fancy type for fixing with 15 mm dia pipe complete all as specified and as directed.

S&F in repairs Modular switch 1 way 6A,1 module , 240 volts ISI marked complete all as specified and as directed.

S&F in repairs Modular switch 1 way 16A, 1 module , 240 volts ISI marked complete all as specified and as directed.

S&F in repairs Socket, 6A - 2/3 pin combined 2 module, , 240 volts ISI marked complete all as specified and as directed.

S&F in repairs Socket 6A/16A - 2/3 pin combined 2 module, , 240 volts ISI marked complete all as specified and directed

S&F in repair Fan step regulator, 120W, 2 module , 240 volts ISI marked complete all as specified and as directed.

S & F in repair Modular Switch 2 way 10 A , 1 module , 240 volts ISI marked complete all as specified and as directed.

S & F in repair Modular Bell Push 6 A , 1 module , 240 volts ISI marked complete all as specified and as directed.

Supply and fixing in repair Switch piano, flush type single pole one way 5 Amp, 240 Volts ISI marked complete all as specified and as directed.

Supply and fixing in repair socket outlet 2 in 1, 3 Pin, 5A complete all as specified and as directed.

Supply and fixing in repair switch socket outliet combined 5 pin 5 amp flush type, 240 Volts ISI marked complete all as specified and as directed.

Supply and fixing in repair switch socket outliet combined 2 in 1,3 pin 5 amp and 15 amp flush type, 240 Volts ISI marked complete all as specified and as directed.

Supply and fixing in repair Socket outliet 5 pin, 15 Amp, flush type, 240 Volts ISI marked complete all as specified and as directed.

Supply and fixing in repair Switch, flush type single pole on way 15 Amps, 240 Volts ISI marked complete all as specified and as directed.

Supply and fixing in repair stepped type electronic fan regulator 100 W, on the existing phenolic laminated sheet etc complete all as specified and as directed.

Supply and fixing in repair bell push, flush type single pole, 5 Amp, 240 Volts complete all as specified and as directed.

Supply and fixing in repairs plug top 15 Amps complete all as specified and as directed.

Supply and fixing in repair Angular Lamp holder, PVC/Polycarbonate type with back plate along with LED lamp 12 watts complete all as specified and as directed.

S&F in repair Call Bell Ding Dong AC 230 Volts, single pole complete all as specified and as directed.

Supply and fixing in repairs bulk head luminaries IP-65 with opal diffuser 10 watt, 230 Volts LED type complete with 10 watt LED bulb complete all as specified and as directed.

S&F in replacement all purpose Surface / wall mounted LED batten , 1x 20W, 220V, polycarbonate housing with integral electronic driver, and power factor >0.95 , 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. (4' ft long ) , 230 Volts 50 Hz complete all as specified and as directed.

S&F in replacement all purpose Surface / wall mounted LED batten , 1x 10W suitable for mirror light fitting , 220V, polycarbonate housing with integral electronic driver, and power factor >0.95 , 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. (2' ft long ) , 230 Volts 50 Hz complete all as specified and as directed.

S&F in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed.

S&F in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 Amp, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing in replacement SPN 40 to 63 Amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing in repair miniature circuit breaker (MCB) 415V 10 KA 'B' curve TPN 40 to 125 Amp in the distribution board complete with connection, testing and commissioing complete all as specified and as directed.

Supply and fixing in replacement Thermostat , switch for electric water heater storage type of capacity 25/35/50 Ltrs , 230 Volts complete all as specified and as directed.

Supply and fixing in replacement Heating element with triangular base / Round base, single phase, 230 Volt, capacity 1.5 KW of existing make complete all as specified and as directed.

Supply and fixing in replacement heating element with triangular / round base, single phase, 230 Volt, capacity 2 KW existing make complete all as specified and as directed.