Construction of News paper reading room and Repairing of dinning hall and kitchen at Mens Hostel no. 4

Amount

Earthwork in excavation by mechanical means ( Hydraulic excavator)/manual means over areas( exceeding 30 cm in depth. 1.5 m in width as well as 10 sqm on plan) including getting out and dispoasl of excavated earth,lead upto 50 m and lift upto 1.5m,as directed by the Engineer-in charge.

All kinds of soil

Filling available excavated earth (excluding rock) in trenches,plinth,sides of foundation etc. in layer not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering,lead up to 50 m and lift upto 1.5 m

All kinds of soil

Supplying and filling in plinth with sandy soil under floors including, watering, ramming consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering

All work upto plinth level

1:5:10 (1 cement :5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level :

1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement for R.C.C work including straightening,cutting,bending,placing in position and binding all complete up to plinth level

Thermo-Mechanically Treated bars

Brick work with Ist class common burnt clay F.P.S.(non modular) bricks in superstructure above plinth level upto floor V level in all shapes and sizes in :

Cement mortar 1:4 (1 cement: 4 coarse sand)

Half brick masonary with 1st class common burnt clay F.P.S (non mopdular) bricks in superstructure above plinth level upto floor V level in

Cement mortar 1:4 ( 1 cement:4 coarse sand)

Providing wood work in frames of doors, windows,clestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length ( hold fast lugs or dash fastener shall be paid for separately)

Local best quality teak wood

Providing wood work in frames of false ceiling,partitions etc. sawn and put up in position:

Local best quality Tolhao wood

Providing and fixing panelled or panelled glazed shutters for doors,windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately,all complete as per direction of Engineer - in-charge

Local best quality Teak wood

35 mm thick shutters

Providing and fixing M.S grills of required pattern in frames of windows etc with M.S flats,square or round bars etc. including priming coat with approved steel primer all complete.

Fixed to openings/wooden frames with rawl plugs screws etc.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diametre bolts,nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size)

Providing and fixing ISI marked oxidised M.S single acting spring hinges with necessary screws etc. complete:

Providing and fixing ISI marked oxidised M.S sliding door bolts with screws etc. complete

Providing and fixing ISI marked oxidised M.S tower bolts black finish,( Barrel type) with screws etc. complete

Providing and fixing ISI marked oxidised M.S handles conforming to IS : 4992 with necessary screws etc. complete:

Steel work in built up tubular (round,square or rectangular tubes etc.) trusses etc,including cutting,hoisting fixing in position and applying a priming coats of approved steel primer,including welding and bolted including special shaped washers etc,complete

Hot finished welded type tubes

52 mm thick cement concrete flooring with concrete hardener top ping under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand :4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2( 1 cement hardener mix :2 graded stone aggregate 6 mm nominal size) by volumn hardening compound is mixed @ 2 litre per 50 kg of cement or as per manufactures specifications. This includes cost of cement slurry,but excluding the cost of nosing of steps etc. complete

Providing and laying vitrified tiles in floor in different sizes ( thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS 15622, of approved brand & manufacturer, in all colour and shade,laid on 20 mm thick cement mortar 1:4 (1 cement :4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the Zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel,pier,wedge,clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily

Double charge vitrified tiles polished finish of size

Size of Tiles 600 x 600 mm

Providing corrugated G.S sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, b olts and nuts 8 mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/vertical or curved surfaces) excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required.

0.8 mm thick with zinc coating not less than 275 gm/sqm

Providing and fixing insulating board ceiling of approved quality with necessary nails etc complete ( framework to be paid separately):

Standard quality hard board sheet 3 mm thick

12 mm cement plaster of mix 1:4 ( 1 cement :4 coarse sand )

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade

New work (two or more coats) over and including priming coats with cement primer

Finishing walls with textured exterior paint of required shade:

New work (Two or more coats applied @ 3.28 Lts/10 sqm) over and including base coat of water proofing cement paint applied @ 2.2 kg/10 sqm

Th. Jeevan Singh

THOUDAM RAMANANDA SINGH