Annual repair to Administrative Block in Mini Sectt. at Panipat (Re-Invited)

Amount

Scraping white wash and colour wash (HSR 8.32 (a)

Tile terracing with one layer of tiles, 22.86 cm X 11.43 cm X 3.81 cm laid dry over a layer of mud mortar including grouting with cement sand mortar 1: 3 and top surface to be left clean (HSR 13.14)

Cement concrete 1:2:4 gola 10cm X 10cm quadrant along junction of roof with parapet wall finished smooth, where specially specified.(HSR 13.64)

Providing & fixing PVC Rain water pipe 6 kg. pressure of ISI mark in cement mortar during masonry work A) 100 mm dia PVC pipe 6 kg. pressure, Supreme, phinolex, Prince (HSR 13.89(a)

Providing and fixing PVC Rain Water pipe 6 Kg. pressure of ISI mark in cement mortar during masonry work 150 mm dia PVC 6 Kg. pressure (HSR 13.89 (b)

Providing and fixing PVC Bend ISI mark (a) 150 mm dia PVC Bend , Supreme, phinolex, Prince (HSR 13.90 (a)

Providing and fixng PVC Bend ISI Mark 150 mm dia PVC Bend (HSR 13.90 b)

Providing & Fixing Ceramic anti skid tiles of size 400x400mm or above of approved make in flooring, laid in any pattern as spercified over 20 mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including ointing in white cement mixed with pigment of matching shades complete reputed manufacturer like:- RAK, NITCO, KAJARIA shall be used. [HSR 14.91)

Providing & Fixing Ist quality Ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manu-facturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including ointing in white cement mixed with pigment of matching shades complete of Size of 300 x 450 mm of reputed manufacturer like:- RAK, NITCO, KAJARIA shall be used. [HSR 14.92(b)].

Providing and laying Baroda Green marble stone 17mm and above thick in risers of step, skirting, dado, pillars and wall lining included matching the grains of marble slab in any pattern as specified laid oer 12mm thick cement sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of marble including rubbing and polishing. The rates are for all heights/storey. The sample shall be got approved from the Engineer-in-Charge (HSR 14.98)

Providing and laying Baroda Green marble stone 17mm and above thick flooring included matching the grains of marble slab in any pattern as specified laid oer 12mm thick cement sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of marble including rubbing and polishing. The rates are for all heights/storey. The sample shall be got approved from the Engineer-in-Charge (HSR 14.99)

Painting one coat with synthetic enamel paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. (HSR 16.7)

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces (HSR 16.25)

Distempering with washable oil bound distemper (of approved manufacture) one coat on old distempered work. (HSR 16.59)

Providing and applying two coat white cement based putty over plastered surface and grinding the surface with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, including complete in all respects. As per satisfaction of Engineer-in-charge. (Makes:- JK & Birla). (HSR 16.81)

Painting one coat with Extrior Ecralic enamel paint on old work (HSR 16.82)(a) 1st Quality

Supplying and fixing glass panes with teak wood moulding (c) 4 mm thick (glazing area above 55sq dm, but upto 84 sq dm of each pane) (HSR 17.42(c)

Supplying and fixing hydraulic door closer, I.S.I.mark, with necessary screws, etc., complete. I.S.I. designation No.III (size of door 851 mm to 1000 mm ) (HSR 17.82(C)

Factory manufactured paneled and glazed door shutters of commercial hard wood, such as hollock, champ, chikrassy and chaplash, etc., c(non –coniferous timber other than team, conforming to I.S specification no. 1003 kiln seasoned), with 100 mm wide vertical syltes, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm wide other rails, with panels of 12 mm thick commercial veneered both sides particle board or plywood of B.W. R. grade, hot-pressed, including cost of iron hinges, screws, chocks/cleats, stops and nails etc., complete fixed in position (excluding the cost of any fittings, other than specified above but including labour for fixing the same in positon:- (b)35 mm thick (HSR 17.91 (b) (-) Note under 17.18)

Factory manufactured wire gauze door and window shutters of commercial hard wood such as Hollock & Champ only. (non-coniferous timber other teak conforming to I.S. specification No. 1003, kiln seasoned) with 100 mm wide vertical styles, 150 mm wide lock rail 200 mm wide bottom rail, and wire gauze of 140 G or 120 G designation including cost of iron hinges, screws, chock/cleats, stops nails etc., complete fixed in position (excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position. (Styles and rails of windows shutter shall be 75 mm wide. (i) 30 mm thick. [HSR 17.92 (i) - Note 1 under 17.18]

Supplying and fixing glass panes including special metal sash putty of approved make (b) glass panes 4 mm thick, exceeding 40 sq dm areas. (HSR 18.30 (b)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE EUROPEAN TYPE WATER CLOSET SUITE WITH CONCEALED ‘P’ or ’S’ TRAP with or without vent (as approved by the Engineer-in-Charge) and all other necessary fittings as fully described in item no.30.3 above. White (HSR 30.6)(i)

EXTRA OVER item nos.30.3 to 30.6 FOR PROVIDING AND FIXING BEST INDIAN MAKE PLASTIC HYGENIC SEAT with lid complete instead of hollow black or white plastic seat and lid. White plastic seat (Solid) (HSR 30.13)(a)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE A RANGE OF THREE URINALS LARGE FLAT BACK OR ANGULAR LIPPED FRONT 610MM HIGH IN VITREOUS CHINAWARE WITH ONE NO. 10 LITRES CAPACITY BEST INDIAN MAKE C.I. AUTOMATIC FLUSHING CISTERN WITH FITTINGS AND FLUSH PIPE ETC.COMPLETE as fully described in item no.30.25 above. White (HSR 30.28(i)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (ORDINARY) LAVATORY SUITES consisting of Lavatory in VITREOUS CHINAWARE size as give below ( to the approval of the Engineerin-charge) including china plug for tap hole where necessary ;R.S. or C.I.BRACKETS for building into wall including painting; 32mm C.P.BRASS WASTE WITH C.P. brass chain and rubber plug; 15mm C.P.BRASS SCREW DOWN PILLAR TAP WITH jam nuts or couplings best design(as approved by the Engineer-in-charge) ALL FITTINGS BEST INDIAN MAKE and; to the approval of the Engineer-in-charge. ALL brass work chromium plated and COMPLETE in all respects INCLUDING cutting andMAKING GOOD THE WALLS, FLOORS AND PAINTING OF FITTINGS ETC. Size 630mm X 510 mm with one no. tap (HSR 30.41)(v)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRROR mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHORMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall of chromium plated brass clamps with C.P. brass screws (as required by the Engineer-in-charge) COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. INDIAN MAKE 600mm X 450mm (HSR 30.71(a)(i)

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the engineer-in-charge). Bib cock Long Body (HSR 30.75 (a)

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the engineer-in-charge). Bib cock (HSR 30.75 (C)

Providing and fixing in position C.P. brass stop cocks (as approved by the Engineerin-charge) 15 MM STOP COCK (HSR 30.76 (a) (ii)

Providing and fixing 15 mm C.P. brass Laboratory cock swan neck of best quality (to the approval of the Engineer-in-charge) One way (HSR 30.78(a)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE FLEXIBLE TUBE CONNECTION. C.P. Brass 15 mm X 450 mm (HSR 30.82(b)(iii)

PROVIDING AND FIXING IN POSITION AUTOMATIC BRASS BALL VALVES IN TANKS. WITH PEASTIC BALL 40 mm internal diameter (HSR 30.110(b)(v)

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 8 mm dia C.P. Brass/ S.S. Jet with lexible tube upto 1 metre long with S.S. tringular plate for Eureopean type W.C.(Hindware/Kingston/Prima/Parko/Marc) (DSR 17.16A of 1313)

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete (DSR 17.18.1) (10 litre capacity - White)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete DSR 17.28.1.2) 40 mm dia

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. - Internal work - Exposed on wall (DSR 18.10.1) 15 mm dia nominal bore Note:- In case of any discrepancy found in nomenclature/ unit of item of BOQ depicted in the DNIT. The nomenclature/unit of MORTH (5th) revision / HSR shall be applicable.