Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.7 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹7.8 L+₹3,595 (0.46%)Rejected-AOC | L2 | Rejected-AOC other than lowest | |
| 3 | L3₹8.8 L+₹98,375 (12.7%)Rejected-AOC | L3 | Rejected-AOC other than lowest | |
| 4 | L4₹10.3 L+₹2.5 L (32.1%)Rejected-AOC | L4 | Rejected-AOC other than lowest | |
| 5 | Rejected-Technical | - | Rejected-Technical Not recommended No, in WLR of HQ CE CC. |
Tender Value
₹9.6 L
EMD Value
₹19,224
Closing Date
13 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I CG
Noida
Addition Alteration to Classroom of CGKG School at Sector 23 Noida
2023_MES_595912_1
AGE I CGN 35 23 24
Open Tender
Civil Works
Item Rate
120 days
Noida
E a i
7 documents required · 7 mandatory
₹500
AGE
₹19,224
30 Aug 2023
17 May 2023
15 Jun 2023
17 May 2023
13 Jun 2023
30 May 2023
Amount
Dismantling floor hearth or wall tiling including cment mortar bedding (incl backing), removing the rubbish off the premises of MOD land complete all as specified.
Demolition cement concrete (unreinforced) in ground floors and paving n exc 15 cm thick and incl removing the demolished material out of MOD land complete all as specified.
Taking down chowkat .exe 1.50 sqm and nexe 4 sqm without taking off shutter each .
Demolition of brickwork built in cement mortar.
Taking down cement plaster on brick or stone walls incl raking out joints, hacking for key, scrubbing dowin with water complete.
M & L for Formwork to soffits and sides of lintel beams or roof beams etc for fair finished of concrete complete all as specified and as directed.
M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finish complete all as specified and directed by Engr-in-Charge.
Material and labour for 10mm dia and over TMT bars, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
- Ditto - but 6mm to 8mm dia.
M & L for Rebaring by using various diameter 12mm to 20mm. Dia, hilti make chemical (Re-500) max.depth 500 mm. rates are including drilling and grouting complete all as directed.
M & L for Rebaring by using various diameter 8mm to 12mm. Dia, hilti make chemical (Re-500) max.depth 200 mm. rates are including drilling and grouting complete all as directed.
Material and labour for providing Reinforced Cement Concrete design mix M-25 using 20 mm graded aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for Reinforced cement concreteM-25 Design mix (20mm graded aggregates) in Slabs supported on walls, beams and columns in floor, roofs, landings, balconies, canopies,deck slabs and in shelves and the like.
M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built , built in cement motar 1:6. complete all as specified and directed.
M & L Vitrified ceramic tiles10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete
M&L for 15mm thick Screed bed or beeding layer of mortar in CM 1:6 for laying floor finishes complete.
Providing & fixing 2mm thick PVC Flooring pasted with rubber base adhesive complete including existing flooring complete in all respect as specified and directed.
S&F window Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
M & L for powder coated aluminium for glazing window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including glass, necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws etc. complete all as specified
M&L for 5 mm thick rendering in CM 1:3 on fair faces of brick work or concrete ceiling surfaces with and finished even and smooth without using extra cement complete.
M&L 15mm th rendering in cement mortor 1:6 on brick or concrete surfaces finished even and smooth without extra cement complete.
M&L for rendering 15 mm thick cement plaster in CM 1:4 on brick Work or concrete surfaces including finished even and smooth without using extra cement.
M&L for preparing new surfaces plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of 3mm thick wall care putty/primer on wall, trowelled to even and smooth finish complete.
M&L for Preparing of new plasterd wall surfaces and applying two coats of distemper oil emulsion, white or tinted over & including one coat of 2mm thick Birla wall care putty overa coat of primer using roller complete all as approved by manufacturer and colour as approved by Engr-in-Charge. (Make : Weather coat of Berger / Apex ultima of Asian paints)
M&L for preparing new surfaces plastered or unplastered surfaces of ceiling with birla white care putty and applying two coats of white wash on ceiling all as specified
Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner all as specified and directed.
Material and labour for Point wiring complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 voltsgrade confirming to IS-694 drawn through and including non metallic rigid PVC heavy duty concled conduit minium 20 mm dia,but shall be increased as per actual site requirement in accordance with clause No.19.125 of SSR Part-I ,with necessary accessories with Flush mounting boxes & white plates with frames housing of switches sockets / fan regulator etc. including 1.5 Sqmm single core solid multitranded copper conductor FRLS 1100 volts grade PVC insulated and unsheathed cable as earth continuity conductor to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge for;- (Note :- The cost of Mudular mounting boxes and modular plates included in the quatated rates) Make : (i) Flush mounting boxes Cat Part Module 18 from model No 6890-07 to 6890-12 of legrand or equivalent in havells, SIEMENS. (ii) White Plates : upto 18 module from No Mylanic series model No 6755 61 to 6755 78 of Legrand or equivalent in Havells / Siemens / Crabtree
One light point controlled by one switch
One bell point controlled by one Switch
One 3 pin 5 Amps socket outlet on independent board
One 3 pin 5 Amps socket outlet on Sameboard
All as per item No 28 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket outlet on independent board.
S&F 6 A one-way SP switch - 1 module of Make Legard Cat No: 6755 01 or equivalent in Simens / Carbtree all as specified and directed.
S&F 16 A one-way SP switch - 1 module of Make Legard Cat No: 6755 11 or equivalent in Simens / Carbtree all as specified and directed.
S&F 6 A 3 pin universal socket 2 modules of Make Legard Cat No: 6734 52 or equivalent in Simens / Carbtree all as specified and directed.
S & F 6/16 A socket 2/3 Pin combined 2 modules of Make Legard Cat No: 6734 55 or equivalent in Simens / Carbtree all as specified and directed.
S & F Fan regulator 100 W with 360° rotation 2 module of Make Legard Cat No: 6759 64 or equvalent in Simens /Carbtree all as specified and directed.
S & F moduler blank plate moudule 1 all as specified and directed.
S&F ceiling rose surface bakelite three terminal all as specified and directed. Make : Anchor/Havells/Standard
S & F double door Sheet metal enclosures factory made DBs 8 way ,240 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No: 5076 11 or equivalent in Simens/ Hager/ L & T
S & F MCBs of the under mentioned type and rating and fixing in DBs (DBs measured and paid for separately) (Note :- Make of the isolator should be the same as that of DB) for the following :-
(a) MCB Single Pole of 240 volts 5-32 Amps,10 KA Capacity, 'C' series of Make: Legrand ,Cat No: 4085-87 to 90,92,93,94,95 or equivalent in Simens/ Hager/ L & T
(b) MCB Single pole + Neutral 240 volts, 32 Amps,10 KA Capacity, 'C' series of Make: Legrand ,Cat No: 4086-17 to 20 or equivalent in Simens/ Hager/ L & T
Supply and fix LED batten luminaire surface mounted ,4 feet system wattage of not less than 18 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 4000 to 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 120 Lumens/watt, filcker free (Ripple less than 5%) and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed with 5 years of replacement warranty on fittings complete all as specified and directed.
M & L for Earthing complete with galvanized steel earth plate electrode 60x60cm x 6.0 mm thick buried directly in ground ( earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 mtr below normal ground level connected to and including galvanised earth lead wire 4.0 mm dia,by means of nuts,bolts,checknuts and washers of galvanized iron including 15 mm bore GI pipe,medium grade up to 7.5 meters long all as shown in electrical plate No.3 of MES SSR part-I and testing on completion including excavation and earth work in any type of soil, PCC (1:3:6) type C1 chamber,precast RCC slab 50mm thick in cement concrete (1:2:4) type B1 reinforced with welded steel wire fabric or XPM,( weight not less than 4 Kg/Sqm), with cast iron frame, funnel with wire mesh,GI watering pipi 20 mm dia medium grade,test point and lugs complete. NOTE:-(i) Items includes the cost of 7.5 metre length GI pipe and earth lead for protection of earth lead.Any variation in length shall be adjusted through deviation order.(ii) On testing,if the earth resistance is not obtained,earthing will be regenerated at no extra cost till the desired earth resistance is obtained.
M&L in replacement for sub main wiring with two runs of PVC insulated and unsheathed FRLS cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor drawn through PVC Cancealed conduit and 4 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed (Note : Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit)
Supply and fix industrial type switch socket with 20 Amps MCB Make:- Iengard Cat No.6078 41 20 A SP complete or Eq in L & T /Hager
M/s SHRI RADHEY BUILDERS
DP COMPLEX
Sanjay Associates
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .