Supply, Installation, Testing and Commissioning of Fire Protection System at New Integrated Administrative Building, Jhargram

Amount

Supply, erection, testing & commissioning of Electrical Motor driven main pump, centrifugal horizontal type, with gland packing capable of deliver 2850 LPM at 88MWC. The pump shall be coupled with TEFC motorof suitable KW with speed of 2900RPM with all accessories and complete set shall mounted on common base frame. The quoted bolts etc. civil foundation will be client's scopre.

Supply, erection, testing & commissioning of Electrical Motor driven Jockey Pump, horizontal, centrifugal type capable to deliver 180LPM at 88 MWC. The pump shall coupled to TEFC motor of suitable KW with speed of 2900RPM with all accerssories mounted on common base frame.

Supply, erection, testing & commissioning of Horizontal centrifugal type MOTOR DRIVEN FIRE PUMP of capacity 171 M3/hr at 70 MWC. 2900 RPM for hydrent & sprinkler system along with : 1. Suitable rated Motor, 2. Common base plate, 3. Coupling, 4. Coupling guard, 5. Anti- vibration mounting 6. Nuts, bolts, fittings etc. (as required to complete in all respect)

Supply, erection, testing & commissioning of Horizontal/Vertical centrifugal type ENGINE DRIVEN FIRE PUMP of capacity 171 M3/hr at 80 MWC. 1800 RPM along with : 1. Suitable rated Motor, 2. Common base plate, 3. Coupling, 4. Coupling guard, 5. Anti- vibration mounting 6. Nuts, bolts, fittings etc. (as required to complete in all respect)

HYDRANT SYSTEM (ABOVE GROUND PIPING): Supply, erection, jointing, testing and commissioning of M.S. Black steel Pipes Heavy grade conforming IS: 1239, part-I/ 3589 including all fittings viz. elbow, tees, flanges, etc. reduces clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the complete with cutting and making good the walls, floors or any other surface. 200 NB

UNDERGROUND PIPING: Supply, erection, jointing, testing and commissioning of ERW M.S. Pipes (conforming IS: 1239,& 3589 part-I, Heavy Grade) the pipes being laid in trenches complete with fittings (conforming to IS: 1239, part-II, Heavy Grade) bends, tees, flanges as per IS: 6392 all necessary accessories complete with wrapping & coating. Flanged/Screwed/Welded type of joint. (Make: Tata/Jindal/ Bansal) 150 NB

Supply & installation of Gunmetal 3 way collecting head with 63mm dia instantaneous type inlet 150mm dia flanged outlet wiyhout built in check valve for fire brigade connection to fire water reservoir (IS:904) with one no butterfly valve & NRV of 150NB size.

Supply, erection, testing & commissioning of ISI Marked STAINLESS STEEL LANDING VALVE with all accessories. (Make: New Age /GEI/ Fire Shield)

Supply, erection, testing & commissioning of ISI Marked STAINLESS STEEL single headed yard hydrant valve with all accessories. (Make: New Age /GEI/ Fire Shield)

Supply, fixing, testing & commissioning of ISI MARKED 15 M long x 63 Dia. Hose. The Hose shall be reinforced rubber lined, woven jacketed type conforming to IS: 636 Type A. With STAINLESS STEEL couplings. The general design and construction of instantaneous couplings, shall comply with IS: 903 (Make:New age/ Fire Shield/ BRG)

Supply, fixing, testing & commissioning of ISI MARKED STAINLESS STEEL WATER BRANCH PIPE WITH NOZZLE. The general design and construction of branch pipes and nozzles shall comply with IS: 903 (latest revision). Nozzles shall be constructed of Stainless Steel. The nozzle sizes shall be of not less than 16 mm in diameter, nor more than 25 mm in diameter. Branch pipes shall be constructed of Stainless Steel and have rings at both the ends. (Make: Sha engineering./ Fire Shield/ GEI)

Supply, erection, testing & commissioning of 25 NB AIR RELEASE VALVE on riser. The Air Release valves shall be of direct spring loaded pop type and shall have a tight, positive and precision closing.

Supply & installation of M.S.HOSE BOX of fabricated from 16SWG CRCA sheet double door with lockable arrangement to accomodate 2RRL hose of 15m length and one branch pipe painted white inside and red outside with one key. Size: 750 x 600 x 250 mm

Supply, erection, testing & commissioning of ISI MARKED SLUICE VALVE conforming to IS: 14846. PN-1.6 with companion flanges, gaskets & nuts and bolts. Valves shall be as per Tender Specification.(Make: H Sarkar/ Koley /Kartar) a) 200 NB

Supply, erection, jointing, testing and commissioning of ISI marked Non Return Valve as per IS: 5312 with companion Flange, nut & bolts etc. (Make : H Sarkar/ Koley /Kartar) a) 200 NB

Supply, erection, testing & commissioning of Steel structure for Pipe Support

Supply and fixing of swinging HOSE REEL & 20 mm dia. Bore Thermoplast Pipe of length 30 mtrs. fitted with 6.35 mm nozzle. The hose reel shall be recessed swinging type, as per IS: 884 with reel drum shall be provided with coupling as per detail code of practice, inclusive of connection with hydrant riser pipe Make: Zenith/ Fire Shield/ S.E.

Supply, erection, testing and commissioning of 15 NB BALL VALVE as per IS : 778 complete with all accessories.

Supply and fixing of 1 KL capacity PVC Priming tank with all accessories

Supply & Fixing of 4 Way Fire Brigade siamese connection with 04 nos GM . N.R.V'S

Supply, erection, testing & commissioning of Foot Valve with Strainer with companion flanges, gaskets & nuts and bolts. a) 200 NB

Supply, erection, testing and commissioning of PRESSURE SWITCH for Pumping System. INDFOSS makes, suitable to high-pressure line. To be mounted on water line for auto start – stop of fire pump as per tender specification. Make : INDFOSS

Supply, erection, testing and commissioning of PRESSURE GAUGE as per tender specification. The scale shall be in metric units. Accuracy shall be 1.0 percent of full-scale range or better conforming to IS:3624-1979.

Supply, erection, testing and commissioning of COMPOSITE MCC PANEL for AUTO operation of Pumps installed in Pump House

Supply & fitting of 415V, 3Pf MU -G10W DOL with in built WLC pump controller stater Relay range (9-14) suitable size of 7.5HP submerssible pump moror set ( make L&T, Model HSN code 8536) on common angle iron frame on wall including nuts bolts etc. including connecting wire.

Supply, erection, testing and commissioning of POWER CABLE (AI) from switchgear panel to motors complete with glands, lugs etc. a) 3.5 C x 70 mm2

b) 3C x 16 mm2

Supply, erection, testing and commissioning of CONTROL CABLE from various instruments to composite panel.(a) 2C x 1.5 mm2

(b) 12C x 1.5 mm2

Supply, earthing equipments in Pump House.

Excavation & Back filling of Earth for laying Under Grounds Pipes including road cutting & mending back

SPRINKLER SYSTEM (UNDERGROUND PIPING): Supply, erection, jointing, testing and commissioning of ERW M.S. Pipes (conforming IS: 1239,& 3589 part-I, Heavy Grade) the pipes being laid in trenches complete with fittings (conforming to IS: 1239, part-II, Heavy Grade) bends, tees, flanges as per IS: 6392 all necessary accessories complete with wrapping & coating. Flanged/Screwed/Welded type of joint. (Make: Tata/ Jindal/Bansal) 150 NB

ABOVE GROUND PIPING: Supply, erection, fabrication, testing of M.S black steel pipe Heavy grade conforming to IS: 1239, part-I/3589 including all fittings viz elbows, tees, flanges etc. reduces clamps, MS support dash fasteners etc. including paiting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and makig good the complete with cutting and making good the walls, floor or any other surface. 150mm NB

Supply, erection, jointing, testing and commissioning of UL Listed, Flange mounted INSTALLATION CONTROL VALVE. Complete with retarding chamber & Principal components of body assembly, Clapper assembly, Clapper catch & Accessories of Basic trimmings, Alarm & test trimmings, Hydraulically operated Water motor gong, Strainer, Flow test & drain valve, Check valve, Drip check, Drip cap, Manual overriding facility, Alarm test valve, Drain valve, Pressure indicator. Make : New Age/ HD 150 NB

Supply, erection, testing & commissioning of Supply, erection, testing & commissioning of ISI MARKED SLUICE VALVE conforming to IS: 14846. PN-1.0 with companion flanges, gaskets & nuts and bolts. (Make: Kartar/Koley/H Sarkar) 150 NB

Supply and installation of swinging type of NON RETURN VALVE as per IS:5312 with flap and SS hinges complete including matching flanges, nuts & bolts confirming to IS 5312 Size 150mm NB) 150 NB

Supply, erection, testing & commissioning of UL Listed STANDARD RESPONSE TYPE SPRINKLER head of 68˚C rating. Finish of the sprinkler shall be either standard Brass or Stain chrome or nickel or polished chrome. Make: UL Approved. a) PENDENT Sprinkler

b) UPRIGHT Sprinkler

Rossett Plates for Pendet type Sprinkler

Flexi Drop pipes UL listed with all fixture & fittings - 1000 mm length

Supply, erection, testing & commissioning of FLOW SWITCH. Make: Honeywell/ System Sensor

Sprinkler Annunciation Panel - 06 Zone Make : AGNI/ RAVEL

Supply, erection, testing & commissioning of 2 C x 1.5 mm2 Cu flexible cable drawn in PVC Conduit Pipe of required size with all fixture & fittings

Supply, erection, testing & commissioning of Pressure Gauge with all accessories Make : H.GURU

Supply, erection, testing & commissioning of 25 NB AIR RELEASE VALVE on riser. The Air Release valves shall be of direct spring loaded pop type and shall have a tight, positive and precision closing.

Supply, erection, testing & commissioning of Steel structure for Pipe Support for Sprinkler Pipe Lines

PORTABLE FIRE EXTINGUISHER & OTHERS Supply, erection, testing & commissioning of ISI Marked 4.5 Kg. Cap. CO2 type Fire Extinguisher complete with tube horn etc., handle , fixing bracket & other accessories Make : Fyrax/ Fire Shield

Supply, erection, testing & commissioning of 6.0 Kg. Cap. ABC (SP) type Fire Extinguisher (ISI marked) complete with fixing bracket & other accessories. Make : Fyrax/ Fire Shield

Supply, erection, testing & commissioning of ISI Marked 9 ltrs. Mechanical Foam (AFFF) (SP) type Fire Extinguisher complete with tube, adaptor etc., Make : Fyrax/ Fire Shield

Supply & Fixing self illuminated SINAGES - "FIRE EXIT" Size : 300 x 150 mm

Supply & Fixing self illuminated SINAGES -"IN CASE OF FIRE ,DO NOT USE LIFT. USE STAIR ONLY" of 1.5cm height letters in red with white background. The size of the board shall be 300x250mm and shall be fixed at the height of 2 mtrs from finished floor near manul call point.

Supply & Fixing self illuminated SINAGES - "Floor Nos" Gr. To 4th Floor Size : 150 x 150 mm

Supply, and fixing in position the sinages "FIRE ORDER" contain the following matter on 3mm thick Opaque PVC foam board of computerised cut, PVC non reflective self adhesive vinyle painted foam board of size 1200x1000

Coordination with Fire & Emergency Deptt., arranging inspection and procurement of NOC. (Statutory Govt. fee shall be paid by us).

MAGNUM SAFETY INDIA

NIMAI CHANDRA BEJ