8477 REPAIRS TO AREA DRAINAGE SYSTEM CULVERT HUME PIPES AND STORM DRAINAGE SYSTEM AND CONNECTED B/R WORK IN OTM MD ACCN AT AICTS NGM OGM FAFA QTRS DCA VBV MAP PH I DAD PCDA (O) AND NADFM AREA UNDER AGE B/R-I OF GE (SOUTH) PUNE

Amount

Dismentling of brickwork or stone/ boulder / PCC block masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc, complete all as specified and directed.

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in hard / dense soil, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in soft / loose soil, complete all as specified and as directed.

Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as specified and directed.

Removing excavated materials (Soil) n. exc. 50m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified.

Demolition cement concrete (Unreinforced) in any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:4 using PCC 1:3:6 type C-1 precast cement concrete blocks, complete all as specified and directed.

All as per item no. 7.00 above but except PCC block, complete all as specified and directed by Engineer-in-Charge.

M & L 15mm thick rendering in cement mortar 1:4 on fair face of brick / stone masonary or concrete surfaces, surface finished even and smooth with using out extra cement, complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in surface channels and drain, complete all as specified and directed.

Taking down cement plaster from old brick / stone masonry walls etc. including racking out joints, hacking for keys and scrubbing down with water complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping including weathering and throating including necessary form work etc., complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for providing precast reinforced cement concrete 1:2:4 type B-1 as in cover slab, chajja, shelves and similar articles with plain faces including chamfers, weatherings, throating etc. and setting in cement mortar 1:4, complete all as specified & directed.

M&L TMT bars, 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S & F TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, cut to length, bent to shape required, including cranking, binding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed.

M&L for RCC 1:1.5:3 type A-1 using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for form work to soffits of suspanded flat slab such as roof slabs, floor slabs, landing, shelves and similar work exc. 200mm thick (horizontal or sloping), finished the surfaces fair, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred / stopped end, complete all as specified and directed.

Extra for forming fair finished drain or channel exc. 30 cm but n. exc. 55 cm inner girth in cement concrete using extra cement including forms, moulds mitred / stopped end, complete all as specified and directed.

Extra for forming fair finished drain or channel exc. 55 cm but n. exc. 85 cm inner girth in cement concrete using extra cement including forms, moulds mitred / stopped end, complete all as specified and directed.

M&L for framed work as in grills, gratings etc. with ends of bars shouldered and / or rivetted, or forged into spikes; framed guard bars; barred iron door, railings and similar work conforming to Fe 290, gde-E-165, complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description exc. 10 cm width or girth, including preparation of new steel surfaces, complete all as specified and directed.

Dismantling structural steel work including doors, gates etc, complete all as specified and directed.

Demolition of cast iron or reinforced concrete drain pipes of 300mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

Demolition of cast iron or reinforced concrete drain pipes of 450mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

Demolition of cast iron or reinforced concrete drain pipes of 600mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

M&L for 300mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed.

M&L for 450mm bore reinforced concrete pipes, class NP3, laid and jointed complete with collars, complete all as specified and directed.

M&L for 600mm bore reinforced concrete pipes, class NP3, laid and jointed complete with collars, complete all as specified and directed.

M&L for concrete bed 1:3:6 type C-2 as in drain pipes including packing under, and haunching against the side of pipes after they are laid and tested in 300mm bore of pipe, complete all as specified and directed.

TULSAYA CONSTRUCTION

Anand Trading Co

M/S Abhishek Builders

Gauri Associates

M/s.BAJRANG CONSTRUCTION

Santosh Pandurang Pise

SUJATA CONSTRUCTION

UNIQUE ENGINEERS

ASMEE ENGINEERING SERVICES

L.K.R.TIWARI CONSTRUCTION