Dismantling, Fabrication, Erection of Sugar Mill

Dismentling, Fabrication, Erection of different type of Pipe LinesM S pipe 1/2 inch to 2 inch Dia

M S pipe 2.5 inch to 12 inch Dia

S S pipe 1/2 inch to 4 inch Dia

S S pipe 5 inch to 16 inch Dia

G I pipe 1/2 inch to 4 inch Dia

M S circular tanks up to 60 inch Dia

M S bend 1/2inch to 12 inch Dia

M S Tee 1/2 inch to 12 inch

M S cross 2 1nch to 12 inch

M S Elbow 2 inch to 12 inch

M S bend above 12 inch Dia

M S Tee above 12 inch Dia

M S cross above 12 inch Dia

M S Elbow above 12 inch Dia

M S Flange 1 inch to 12 inch Dia

M S Flange above 12 inch Dia

M S fabricated Right angle valve up to 12 inch Dia

G M/ C I valve 1/2 inch to 12 inch Dia

M S fabricated Right angle valve above 12 inch Dia

GM/CI valve above 12 inch Dia

M S nipple 1/2 inch to 8 inch Dia

M S nipple above 8 inch Dia

M S Reducer 1/2 inch to 8 inch Dia

M S Reducer above 8 inch Dia

Bagacillo pipe G I/MS 16 inch Dia

M S circular coil per inch Dia per ft length(circular)

M S cone per inch Dia 3 mm to 12mm thk plate

Pumps cap up to 15 M3 with bed & motor

Pumps cap 15 M3 to 50 M3 with bed & motor.

Pump cap 50 M3 to 125 M3 with bed & motor

Pump cap above 125 M3 with bed & motor.

Pump/motor bed up to 50 M3 cap.

Pump/motor bed 50 M3 150M3 cap.

Pump/motor bed above 150 M3 cap.

Fabrication of M.S. bed of motor and pumps upto 50 m3 capacity

Fabrication of M.S. bed of motor and pumps above 50 m3 capacity

Motor up to 5 HP.

Motor 5 HP to 10 HP.

Motor 11 HP to 30 HP.

Motor 31 Hp 75 HP.

Motor 76 HP TP 150 HP.

Motor above 150 HP.

Massecuite/Magma Pumps 6 inch to 12 inch size.

Molasses Pumps 3 inch to 6 inch size.

Pipe size above 12 inch Dia ( per M.T.)

Any Ractangular/cylindrical tank (per M.T.)

any type of structure (per M.T.).

Any type of trusses and building collumn (per M.T.).

Purlin per M.Ton.

G I Sheet 3x9 ft per sheet.

A C Sheet 1mtr x 9 ft per sheet.

Any type of platform per Sqft.

Any type of gutter per Sqft.

Any type of patch work per Sqft.

Stair case up to 3 ft wide per runnig ft

Stair case above 3 ft wide per runnig ft

Monkey ladder per running ft length

Railing per running ft length

General M.S welding for running feet length.

Arcing of mill roller

Cleaning and welding of crown pnion as per profile

Fabrication and errection of DSM bagasse scroll conveyor

Fabrication and errection of mud scroll conveyor

Dismantling , fabrication and errection of cane un-loader runner

Partition plate of juice heaters are to be replaced with new & necessary modification to be done

Pan & Evaporator shell repairing / patch work in running Sq. feet

Dismantling , fabrication and errection of cane un-loader trolley

Dismantling , fabrication and errection of catcher/ save all evaporator body & pans

Dismantling , assembly of parts and fitting of spray pond nozlles with PVC cluster (complete set of 5 pcs.).

Cleaning of spray pond nozzle during crushing season and replacement of nozlle if neceassary (complete set).

Welding of tail bar & tail bar coupling.

Dismantling and fitting of knives of each cane cutter

Dismantling , fabrication and errection of APCM ducting.

Dismantling , fabrication and errection of hot water storage tank above 16” dia per M.Ton.

Dismantling of existing worn out angles ,runners of cane carrier , inter carrier,bagasse elevator and main bagasse carrier. Fitting of angles and runners of above per feet length.

Alignment of trough base plates of bagasse elevator/ B.C per Sq.mtr.

Dismantling and fitting of side plates of cane carrier, bagasse elevator and MBC.

Fabrication and errection of DSM screen juice box and structure.

Repair of juice gutters below mill house by changing wornout nipple etc. Rates are in Sqr. Feet

Replacement of wornout parts of Hopper no. 1, 2 & 3 per Sqr. Feet length.

Dismantling, reparing and refitting of ID fans of skoda boiler no. 1, 2, 3 and ID fan of APCM.

Repair of sugar grader No. 1 & 2

Dismantling and errection of cooling coils of crystillizer.

Repairing of internal structure of APCM wet scrubber.

Dismantling , fabrication and errection of crystilizer driving drum

Dismantling , fabrication and errection of vacuum filer mud shoot 700 mm x 3000 mm x 300 mm made of 8 mm M.S. plate.

Dismantling, fabrication and errection of mud azitator of vacuum filture

Dismantling , fabrication and errection of cane cutter foundation bed plate.

Dismantling , fabrication and errection of 2 nos. under feed roller with grooving of 1-1/2" & 2" pitch

Dismantling , fabrication and errection of bagasse chute of bagasse elevator (after mill no. 6).

Cleaning, Digging and filling of sand, stone & bazri of 4 nos. APCM ash pit, Size 12.5 mt x 13.5 mt x 1.3 m depth

Dismantling, Fabrication and erection of MS ducting per sqft.

Dismantling of flanges 2”dia to 6” dia and refitting after cleaning of the equipment (without fabrication) per inch dia.

Dismantling of flanges 8”dia to 40” dia and refitting after cleaning of the equipment (without fabrication) per inch dia.

Dismantling of pipe lines 2” dia to 8” dia and refitting per inch dia per feetlength after cleaning the equipment (without fabrication)

Dismantling and refitting of any reduction gear box.

Dismantling of any reduction gear box and refitting of planetary reduction gear box with drive

Opening of FRP flanges and refitting after cleaning Size 6” dia (per pc).

Dismantling of FRP Pipe of Size 6” dia and refitting after cleaning per inch dia per feetlength

Dismantling and refitting of FRP cross of size 6” dia after cleaning (per pc).

Dismantling, fabrication and erection of complete shell of vacuum pan no. 1 of size 3.8 mtr. dia x 4.1 mtr. height. To be fabricate with 12 mm plate

Dismantling and erection of complete inner casing of NK-1100 NHEC centrifugal machine

up engineering works