ADDITION/ ALTERATION/ RENOVATION OF GYM NO 01 AT NDA KHADAKWASLA

Amount

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m deep and getting out in soft/loose soil Complete all as specified and as directed by Eng-in-Charge.

M&L for cement concrete 1:4:8 type D 2 using 40 mm graded stone aggregate as in foundation filling and mass concrete Complete all as specified and as directed by Eng-in-Charge.

M&L Brickwork with fly ash bricks (old size bricks), straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 Complete all as specified and as directed by Eng-in-Charge.

M&L for 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base floor including necessary formwork if required any Complete all as specified and as directed by Eng-in-Charge.

S&F Coloured Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size ( As approved by GE) confirming to IS 15658-2006 of 60mm thickness, M-35 grade and Including Sand cushioning average 50mm thick below interlocking paver block including spreading and levelling Complete all as specified and as directed by Eng-in-Charge.

M&L Cement concrete type B1 1:2:4 ( 20mm graded stone aggregate) as in edges of chequered/Interlocking tile path to making slope Interlocking surface to GL Complete all as specified and as directed by Eng-in-Charge.

M&L for 15mm thick rendering in CM (1:4) on brick work or concrete surface as in wall including finishing the surfaces even and smooth Complete all as specified and as directed by Eng-in-Charge.

M&L for applying plaster of paris putty of minimum 2 mm thick to prepare the surface even and smooth, including complete removal of existing painted surface of wall Complete all as specified and as directed by Eng-in-Charge. Note- (The quoted rate deemed to be included for use of all necessary scaffoldings for any height or position and nothing extra on this account will be admissible.)

M&L for two coat of plastic emulsion paint (Oil based) on wall surface over a coat of priming paint Complete all as specified and as directed by Eng-in-Charge. Note- (The quoted rate deemed to be included for use of all necessary scaffoldings for any height or position and nothing extra on this account will be admissible.)

M&L for two coat of oil bound distemper over a coat of alkali resistant priming paint on newly pastered surface of wall including preparation of surface Complete all as specified and as directed by Eng-in-Charge.

M&L for applying one coat of distemper oil emulsion on surface of old painted wall Complete all as specified and as directed by Eng-in-Charge. Note- (The quoted rate deemed to be included for use of all necessary scaffoldings for any height or position and nothing extra on this account will be admissible.)

M&L for applying one coat of distemper oil emulsion on surface of old painted ceiling Complete all as specified and as directed by Eng-in-Charge. Note- (The quoted rate deemed to be included for use of all necessary scaffoldings for any height or position and nothing extra on this account will be admissible.)

M&L for apply one coat of synthetic enamel paint on surface of old painted wooden surfaces exc 10 Cm width or girth Complete all as specified and as directed by Eng-in-Charge.

M&L for apply one coat of synthetic enamel paint on surface of old painted steel surfaces exc 10 Cm width or girth Complete all as specified and as directed by Eng-in-Charge.

M&L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm including preparing surfaces plastered or unplastered Complete all as specified and as directed by Eng-in-Charge.

M&L for complete removal of existing painted surface and finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Complete all as specified and as directed by Eng-in-Charge.

Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles Complete all as specified and as directed by Eng-in-Charge.

S&F for 15mm dia Tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors , wall etc ( surface or concealed type) Complete all as specified and as directed by Eng-in-Charge.

S&F 15 mm bore dia Self-closing taps, cast copper alloy, chro-mium plated, screwed for iron pipe and fixed Complete all as specified and as directed by Eng-in-Charge.

Demolition of cement concrete in ground floors and pavings (unreinforced) n.exc 15 cm thickness (below or above ground level) Complete all as specified and as directed by Eng-in-Charge.

M&L PCC (1:3:6) type C1 using 12.50 mm graded aggregate as in drain and finishing the surface even and fair Complete all as specified and as directed by Eng-in-Charge.

S&F Framed work such as grills, gratings, Gates including pintle hinges,stops, hand made sliding bolts etc., with ends of bars shouldered, welded and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165. Complete all as specified and as directed by Eng-in-Charge.

M&L Brickwork with fly ash bricks (old size bricks), straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) Complete all as specified and as directed by Eng-in-Charge.

M&L PCC (1:3:6) Type C2 using 40 mm graded aggregate as in surface channel and drain Complete all as specified and as directed by Eng-in-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc Complete all as specified and as directed by Eng-in-Charge.

Demolition of cement concrete as in roofs, floors (other than ground floors), beams stair cases, landing, chajjas and similar suspended work. Complete all as specified and as directed by Eng-in-Charge.

Taking down cement plaster on brick or stone or concrete surfaces of wall/roof surface of any slope or positionetc,including raking out joints , hacking for key, scrubbing down with water etc.Complete all as specified and as directed by Eng-in-Charge.

M&L for PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) averaging 40mm thick as in roof padding / levelling course and finishing the surface even and fair for receiving cement plaster Complete all as specified and as directed by Eng-in-Charge.

M&L for providing, cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregate as in roof kerbs or mud stops, top of chajjas, coping, basement for water tank etc rounded or chamferred on edges finishing the surface even and fair for receiving cement plaster Complete all as specified and as directed by Eng-in-Charge.

M&L for water proofing treatment to RCC dome shaped roof slab, walls, chajjas etc,including taking down of existing un-serviceable water proofing treatment of any description / bituminous membrane and taking down existing plaster on roof and parapet of any roof height surfaces and applying cement slurry @3 Kg/Sqm after prepration of surfaces carefully by cutting chiseling, cleaning the surface by scraping, brooming, brushing etc. to recive the new plaster as described below and removing the rubbish from site shall be carried out as specified below and as directed by Engineer-in-Charge including following (a) providing 10mm average thickness of screed layer on RCC roof slab in cement mortar (1:3) mixed with liquid WPC mixed @ 200 ml / 50 Kg bag of cement or as recommended by manufacturer and the same shall be measured and paid in the unit rate quoted under this item. (b) Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved bitumnous primer @ 0.20 kg/Sqm of area complete all as specified. . (c) Providing APP based polymeric modified approved membrane of min 3mm thick, non woven, polyester, weighingh not less than 3.5 Kg/Sqm with laps & overlaps as specified & joints sealed and applied complete by torch application method all as specified & directed by Eng-in-charge. carrying out test by flooding water for 24 hrs for leakage & seepages and rectifiying the same to the entire satisfaction of GE. (d) Finally applying one coat of solar reflective bituminous aluminum paint @ 0.15 ltr/sqm on the top of membrane surface complete all as specified and as directed by Eng-in-charge.

M&L for water proofing treatment to RCC roof slab, walls, chajjas etc,including taking down of existing un-serviceable water proofing treatment of any description / bituminous membrane and taking down existing plaster on roof and parapet of any roof height including prepration of surfaces carefully by cutting chiseling, cleaning the surface by scraping, brooming, brushing etc. to recive the new plaster as described below and removing the rubbish from site shall be carried out as specified below and as directed by Engineer-in-Charge including following (a) providing 10mm average thickness of screed layer on RCC roof slab in cement mortar (1:3) mixed with liquid WPC mixed @ 200 ml / 50 Kg bag of cement or as recommended by manufacturer and the same shall be measured and paid in the unit rate quoted under this item. (b) Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved bitumnous primer @ 0.20 kg/Sqm of area complete all as specified. . (c) Providing APP based polymeric modified approved membrane of min 3mm thick, non woven, polyester, weighingh not less than 3.5 Kg/Sqm with laps & overlaps as specified & joints sealed and applied complete by torch application method all as specified & directed by Eng-in-charge. carrying out test by flooding water for 24 hrs for leakage & seepages and rectifiying the same to the entire satisfaction of GE. (d) Finally applying one coat of solar reflective bituminous aluminum paint @ 0.15 ltr/sqm on the top of membrane surface complete all as specified and as directed by Eng-in-charge.

Demolition and breaking up drain pipes 150mm internal dia (Salt glazed ware, AC or Reinforced oncrete) set in cement mortar Complete all as specified and as directed by Eng-in-Charge.

S&F 150mm bore Asbestos cement pipes in any length with cement joints, fixed to walls Complete all as specified and as directed by Eng-in-Charge.

S&F 150 mm bore Bends plain (any radius) Complete all as specified and as directed by Eng-in-Charge.

S&F 150mm bore Junction, single, equal or unequal, ordinary or inverted with spigot or socket branch Complete all as specified and as directed by Eng-in-Charge.

S&F Stack clamps for 150mm bore pipe out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof Complete all as specified and as directed by Eng-in-Charge.

M&L for 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads sectional area exc 6 & n.exc 13 sq.cm Complete all as specified and as directed by Eng-in-Charge.

S&F 25 mm thick 2nd class hard wood boarding plain one side, with butt joints and fixed with nails as in floors and skirting Complete all as specified and as directed by Eng-in-Charge.

M&L 25 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work as in shelve and similar work Complete all as specified and as directed by Eng-in-Charge.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame ) of exc 1.5 sqm and n exc 4 sqm each. Complete all as specified and as directed by Eng-in-Charge.

Cutting out bricks, forming toothing for, and bonding new into old work including value of new materials entering old walls and jointing and pointing in CM 1:6 (measured on vertical face in contact with old wall only) Complete all as specified and as directed by Eng-in-Charge.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame ) of exc 1.5 sqm and n exc 4 sqm each and refixing other opening Complete all as specified and as directed by Eng-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and removing rubbish off the premises.Complete all as specified and as directed by Eng-in-Charge.

M&L for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with CM (1:6) and finished even and smooth without using extra cement.

M&L 25 mm thick (average) PCC (1:2:4), type B-0 using 12.5mm graded stone aggregate as in sub base/roof padding and leveling course etc.Complete all as specified and as directed by Eng-in-Charge.

M&L for Joint free Non-skid Ceramic colour tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including taking down old backing screed bed and including M&L 15 mm thick screed bed or bedding layer in cement mortar (1:6) Complete all as specified and as directed by Eng-in-Charge.

S&F glazed ceramic coloured tiles in vertical surfaces 350X250X6 to 7mm / 450 x 300 x 6 to 7mm thick set and jointed in neat cement slulrry and pointed in white or colour cement to match coloured tiles laid over and over including 10mm thick backing coat other than fair faces of brick work or concrete surfaces in CM (1:4) and Complete all as specified and as directed by Eng-in-Charge.

M&L for Machine cut cudappah stone slab 20-25mm thick over and including 25mm thick in CM (1:6) cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing Complete all as specified and as directed by Eng-in-Charge.

S&F 25 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win?dow-cills, cooking platforms,shelves and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix?ture of pigment to match wth shade of granite.Complete laid over and over including 15mm thick in CM (1:6) all as specified and as directed by Eng-in-Charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations Complete all as specified and as directed by Eng-in-Charge.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm Complete all as specified and as directed by Eng-in-Charge.

S&F 15 mm bore Bib taps ,Fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed Complete all as specified and as directed by Eng-in-Charge.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame ) of not exc 1.5 sqm each. Complete all as specified and as directed by Eng-in-Charge.

S&F Anodised aluminium frame with powder coating thickness 50 microns for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. Complete all as specified and as directed by Eng-in-Charge.

S&F Anodised aluminium window and ventilator shutters with powder coating thickness 50 micron, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) Complete all as specified and as directed by Eng-in-Charge.

S&F 5 mm thick Sheet glass, ordinary quality and glazing with oil putty/rubber packing/ anodised aluminium snap beading in squares not exceeding 0.5 Sqm in each panel. Complete all as specified and as directed by Eng-in-Charge.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples or aluminium beading for windows/Ventilators/Doors Complete all as specified and as directed by Eng-in-Charge.

S&F 100 mm size Aluminium anodised barrel tower bolt of extruded section and fixed Complete all as specified and as directed by Eng-in-Charge.

S&F PVC partition of 52mm thick consisting of 12mm thick both side prelaminated solid PVC plastic ply sheet reinforced with frame work made from 40mm x 20mm MS tubes. In between two MS tubes, 5mm thick prelam heat moulded 'C channel of size 75mmx50mm with feathered edges shall be fixed on the floor, wall and ceiling. Plastic ply opanel shall be inserted in the PVC 'C channel. The first & last MS tube should be errected such that it is inside a PVC 'C channel, in between adjoining plastic panel, 5mm thick x75mm width plain PVC sheet feathered at edges shall be stick on the front & back face using solvent cement Complete all as specified and as directed by Eng-in-Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. On section 8 of SSR (II) (2020) Complete all as specified and as directed by Eng-in-Charge.

S&F Factory Made Solid PVC Moulded Door Shutter with partical board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing Complete all as specified and as directed by Eng-in-Charge.

S&F MS work for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 Complete all as specified and as directed by Eng-in-Charge.

S&F Mild steel Expandable Fastener nut & bolts type (machine made) with hexagonal /square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut,length of bolt exc 5cm but n exc 10cm long dia of shank 5 to 10 mm Complete all as specified and as directed by Eng-in-Charge.

S&F Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 with and including welding or soldering joints Complete all as specified and as directed by Eng-in-Charge.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls Complete all as specified and as directed by Eng-in-Charge.

S&F 110 mm bore PVC (SWR) bends any radius Complete all as specified and as directed by Eng-in-Charge.

M&L Preparing surfaces of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Returning , filling in soil including spreading leveling, watering and well ramming in layers n.exc 25cm. Complete all as specified and as directed by Eng-in-Charge.

Removing excavated soil n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting points in soil Complete all as specified and as directed by Eng-in-Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, regulators, sockets, light fittings etc. and making good the disturbed surfaces of walls, floors, etc.Complete all as specified and as directed by Eng-in-Charge.

Taking down old unserviceable/worn out sub main wiring of any type and size complete all as specified.Complete all as specified and as directed by Eng-in-Charge.

Taking down Main switches/DBs of any make and type including teakwood board, MCBs/MCCBs etc. complete and making good the disturbed surfaces including colour wash Complete all as specified and as directed by Eng-in-Charge.

Dismantling / disconnecting and taking down ceiling fan/ exhaust fan/Wall fan of any sweep along with down rods, MS clamp and accessories, keeping with safe custody Complete all as specified and as directed by Eng-in-Charge.

Refixing the Ceiling Fan of any type and size retrieved against Item ser No. No. 73 above with replacement of required accessories such as down rods, MS Clamps, nuts bolts etc. including 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal over hauling the fan, Painting of ceiling fans with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust Complete all as specified and as directed by Eng-in-Charge.

Refixing the Exhaust Fan of any type and size retrieved against Item ser No. 73 above with replacement of required accessories such as, louvers shutters, nuts & bolts reqd size and 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal including over hauling the Exhaust fans with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust Complete all as specified and as directed by Eng-in-Charge.

Refixing the wall mounted Fans of any type and size retrieved against Item ser No. 73 above with replacement fixing accessories required at site for fixing of Wall fan such as nuts & bolts, clamp, fastner etc and 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal including cleaning of all dust and durt particals Complete all as specified and as directed by Eng-in-Charge.

M&L for point wiring (concealed type) with 1.5 sq.mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, ,single core, multi-stranded copper conductor,and continuous earth wire unsheathed (FRLSH), single core multistranded copper conductor cable of size 1.5 sq.mm earth continuity conductor conforming to relevent IS, connected to common earth dolly,colour coding of wire shall be red wires for phases, black wire for neutral and green wire for earth, drawn in and including rigid non-metallic PVC medium duty conduit (ISI mark) of size not less than 20 mm dia including concealed conduit wiring with all fittings and accessories including conecaled modular type metal flush box, along with cover plate & frame suitable for fixing modular switches/ sockets , Fan regulator etc and making good the disturbed surfaces to match the existing surfaces cComplete all as specified and as directed by Eng-in-Charge for following items:-

One light point controlled by one, one way switch

One bell/buzzer point controlled by one independent push button on the independent board

One light point controlled by two way switch.

One ceiling/exhaust fan point controlled by one way switch and regulator.

One three pin 5 Amps socket outlet point controlled by one way switch on same board

One three pin 5 Amps socket outlet point controlled by one way switch on independent board

All as per Serial Item No. 79 here-in-before but for one modular socket point 15 Amps with 2.5 sq.mm PVC insulated unsheathed (FRLSH), 1100 volts grade, ,single core,multistranded copper conductor,and continuous earth wire unsheathed (FRLSH) ,single core multi-stranded copper conductor cable of size 2.5 sq.mm earth continuity conductor conforming, to relevent IS, connected to common earth dolly Complete all as specified and as directed by Eng-in-Charge. Note for Sl Item NO. 79 to 80 above : (i) Cutting in chases and pointing in brick wall/Stone Wall will be done by contractor without any extra cost. (ii) Making good of distrubed surfaces matching with existing finishes will be done by contractor without any extra cost

S&F switch modular, single pole, one way 6 Amps, 1 module, 230 V AC, 50 Hz Complete all as specified and as directed by Eng-in-Charge.

S&F modular switch, single pole, one way 16 Amps, one module ,230 V, AC, 50Hz Complete all as specified and as directed by Eng-in-Charge.

S&F modular socket 6 Amps, 2/3 pin combined 2 module, 230 V, AC, 50Hz Complete all as specified and as directed by Eng-in-Charge.

S&F modular socket 16 Amps, 2/3 pin combined 2 module, 230 V, AC, 50Hz Complete all as specified and as directed by Eng-in-Charge.

S&F ceiling rose surface bakelite 65 x 50 mm two to three terminals, 230 V, AC Complete all as specified and as directed by Eng-in-Charge.

M&L Modular type stepped electronic fan regulator two module Complete all as specified and as directed by Eng-in-Charge.

M&L Modular Bell push 6A, one module Complete all as specified and as directed by Eng-in-Charge.

M&L Buzzer,Ding Dong AC, 230 volts, single pole Complete all as specified and as directed by Eng-in-Charge.

S&F switch modular, single pole, two way 6 Amps, 1 module, 230 V AC, 50 Hz Complete all as specified and as directed by Eng-in-Charge.

S&F Modular metal flush box, plate & frame 12module ( 8" x 6") not less than 1.6 mm thick for mounting of modular 2 in 1, 3pin 5 and 15 Amp flush type switch and socket outlets concealed in wall Complete all as specified and as directed by Eng-in-Charge. Note: (i) 04 Nos of 2 in 1,3 pin 5/15 Amps switch and socket shall be fixed on one modular metal flush box. (ii) Separate submain wiring of size 4.00 Sqmm shall be provided from main DB to each flush box. Cost of 5/15 Amps S/S and Sub Main Wiring shall be paid separately against respective Item of Sch.

S&F LED Light fitting 1X20 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. tube light with diffused optics ultra bright LED tube light 20watt with high efficiency,integrated aluminum heat sink Complete all as specified and as directed by Eng-in-Charge.

S&F of decorative 4 feet tube set(T8) with motion sensor, LED lighting fixture with extruded aluminium heat shrink, environmental friendly, energy efficient ready to use pack of capacity 18Watt LED, accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.Complete all as specified and as directed by Eng-in-Charge. Make : Luker product code - LT818SR or techo commercially equivalent as mentioned in Appendix 'C' to tender.

S&F of 20Watt, 6500k, Inverter LED Batten with square profile and polycarbonate channel, lithium ion battery withcharging time 8-10 hours and backup time upto 4 hours complete set with tube rod, internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size Complete all as specified and as directed by Eng-in-Charge.

S&F Ceiling light fitting 30 Watt , AC 230 Volt, 50 Hz, IP 65, diameter 225x35mm, circular type ABS plastic body with PC diffuser including fixing, connecting and testing Complete all as specified and as directed by Eng-in-Charge. Make : LUKAR Product code No. LOR65-30 or techo commercially equivalent as mentioned in Appendix 'C' to tender.

S&F LED Flood light of luminaries 200Watt, Energy saving, environmental friendly,long life, exclusive innovative die-cast aluminium IP66 flood light prewired complete with all accessories and wall mounting bracket of suitable size including clamps, nut bolts etc Complete all as specified and as directed by Eng-in-Charge. Note :- Make : Havells Cat Part No. JETAIRISALPHAFL200WLED857PBOLTG, HSN Code 9405 or techo commercially equivalent as mentioned in Appendix 'C' to tender.

S&F Sheet metal enclosure single pole and neutral with a two pin and earth plug top and socket complete with one single pole MCB 20 Amp Complete all as specified and as directed by Eng-in-Charge.

M&L for sub main wiring with two single core 6 sq.mm nominal area with 1100 volts grade confirming to relevent IS, PVC insulated unsheathed with one run of 6 sq.mm multi stranded copper conductor cable (FRLSH) ISI marked for continuous earth wire drawn in and including concealed rigid non-metallic PVC conduit (ISI mark) of size not less than 20 mm dia medium grade with fittings Complete all as specified and as directed by Eng-in-Charge. NOTE :- (i) Two runs of cable and one run of earth cable and one run of PVC conduit will be measured as one length (ii) Cutting in chases and pointing in brick wall/Stone Wall will be done by contractor without any extra cost. (iii) Making good of distrubed surfaces matching with existing finishes will be done by contractor without any extra cost rating of MCBs being fixed.

M&L for sub main wiring with two single core 4 sq.mm nominal area with 1100 volts grade confirming to relevent IS, PVC insulated unsheathed with one run of 4 sq.mm multi stranded copper conductor cable (FRLSH) ISI marked for continuous earth wire drawn in and including concealed rigid non-metallic PVC conduit (ISI mark) of size not less than 20 mm dia medium grade with fittings Complete all as specified and as directed by Eng-in-Charge. NOTE :- (i) Two runs of cable and one run of earth cable and one run of PVC conduit will be measured as one length (ii) Cutting in chases and pointing in brick wall/Stone Wall will be done by contractor without any extra cost. (iii) Making good of distrubed surfaces matching with existing finishes will be done by contractor without any extra cost.

S&F MCB DB VTPN 4 way , sheet metal enclosure double door load line powder coated IP-43 protection with provision for MCCB 100Amps, 4 pole MCCB as incomer and SP/TP MCBs as out goings complete provided with insulated vertical phase bus-bars, neutral bars with shrouds, earth bars, sticking saddles, cement spill protector, colour-coded inter connecting wire set, cable ties, blanking plates and circuit identification labels, fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs / thimbles duly crimped for connections Complete all as specified and as directed by Eng-in-Charge. NOTE :- MCB SP/SPN/TPN shall be measured and paid seperately.

S&F MCB SP, current carrying capacity, 40-63Amps ,240V, 10KA 'B' curve miniature circuit breaker in and including copper lugs / thimbles of size as per wire / cable including crimping with suiable size lugs for connection, testing and commissioning Complete all as specified and as directed by Eng-in-Charge.

S&F MCB DB SPN 12 way, double door ,sheet metal enclossures, single pole and neutral 240 Volts, IP-43 protection with busbar not less than 100Amps, blanking plates and circuit identification labels complete, fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs / thimbles duly crimped for connections Complete all as specified and as directed by Eng-in-Charge. NOTE :- MCB SP/SPN shall be measured and paid seperately.

S&F MCB DB SPN 8 way, double door ,sheet metal enclossures, single pole and neutral 240 Volts, IP-43 protection with busbar not less than 100Amps, blanking plates and circuit identification labels complete, fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs / thimbles duly crimped for connections Complete all as specified and as directed by Eng-in-Charge. NOTE :- MCB SP/SPN shall be measured and paid seperately.

S&F miniature circuit breaker single pole Neutral (SPN) current carrying capacity upto 40 Amps, 240V, 10 KA, 'C' curve miniature circuit breaker (MCB) in and including copper lugs / thimbles of size as per wire / cable including crimping for connection, testing and commissioning Complete all as specified and as directed by Eng-in-Charge.

S&F miniature circuit breaker single pole (SP) current carrying capacity 6 -32 Amps, 240V, 10 KA, 'B' curve miniature circuit breaker (MCB) in and including copper lugs / thimbles of size as per wire / cable including crimping for connection, testing and commissioning Complete all as specified and as directed by Eng-in-Charge.

S&F exhaust fan, steel body, single phase, heavy duty, Metal frame,300 mm sweep, 1400 RPM including fixing of mounting frame in the round hole cutting in the wall, by means of rugged bolts, nuts and washers etc, including three core copper conductor flexible cord of 0.5 Sqmm cross sectional area of required length from ceiling rose to the porcelain connector block of the exhaust fan Complete all as specified and as directed by Eng-in-Charge. Note:- Cost of Exhaust Fan includes the cost of GI air Louvers 16 SWG.

S&F Wall Fan 400mm Sweep, Tempest HS, Hi speed, Air delivery not less than 100 m3/min, 2100rpm, power input 110W with pull cord switch for speed and oscillation regulation including installation,commissioning and testing Complete all as specified and as directed by Eng-in-Charge.

M&L for earthing with 600x600x6mm galvanised steel earth plate electrode buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate at a depth of not less than 1.5m below ground level, connected to and including G.I. wire of size 4 mm dia by means of bolts,nuts and check nuts and washers of galvanised steel, GI pipe 15 mm dia light grade pipe for protection of GI earth lead wire both to be provided to the extent of 7.5 metres as earthing lead and connecting to the eqpt/ machinery etc. including charcoal dust and common salt packed all around the earth plate in alternate layer in the earth pit all as per electrical plate No. 3 of SSR Part I-2009 including PCC chamber made up of PCC 1:3:6 type C1 & RCC Chamer cover of size 540x540x100 mm made with 1:2:4 Type B1 using 6 mm round MS bar & 8 mm MS bar for handle , 20 mm dia medium grade G.I. watering Pipe from top edge of the earth plate upto M.S. funnel with wire mesh provided inside the concrete earth pit for watering arrangement including excavation and earth work in any type of soil and testing Complete all as specified and as directed by Eng-in-Charge.

Supply , laying and testing cable XLPE insulated,screened PVC bedded, galvanised steel strip or wire armoured electric power cables armoured heavy duty electic cable with aluminium conductor,1100 volts grade,cross-sectional area 95 sqmm, 3.5 core Complete all as specified and as directed by Eng-in-Charge.

Supply and laying unreinforced precast concrete cable covers class -LV, type 1 flat, of size 250mm X 150mm X 40mm , in trenches for cable protection, embossed with ËLECTRIC"on top surface Complete all as specified and as directed by Eng-in-Charge.

M&L for excavation in trenches in Hard dense soil n. exc.1.5 m wide and not exceeding 1.5m in depth for laying of pipes, cables or for fixing poles and stays/tower or for laying pipes (where provided for protection of cable) and getting out including trimming the sides and forming botton surface to required level Complete all as specified and as directed by Eng-in-Charge.

M&L for sand cushioning to electric cable with clean dry river sand/Crushed stone sand 8 cm thick layer before laying of cable in trenches and 15 cm thick after the cable is laid in trenches/cable ducts for cable protection Complete all as specified and as directed by Eng-in-Charge.

Supply and fixing GI tubing (ISI Marked), light grade 100 mm bore for cable protection with all necessary fittings as required, laid in trenches, under road/floors or on electric poles Complete all as specified and as directed by Eng-in-Charge.

Deccan Enterprises

VIKAS ENTERPRISES

Mehta and Co.

OM GANESH CONSTRUCTION

PAWAN B SHINDE

M/S Narendra Construction