WBPWD/SEHEC/CKHED/NIQ27/19-20

Amount

SITC of PANEL

SITC of LT,Cubicle Type,Floor Mounted , totally enclosed, fully compertmentalized electrical control panel suitable for operation at 415 Volt, 50 Hz,as per size, design & drawing to be approved by EIC.The panel board will be fabricated by CPRI approved panel maker as per detail specification(Uploaded in the Specification Section).

Cutting Channel of required size on masonry wall by Electric operated cutting machine incl. supplying & fixing of heavy gauge Polythene pipe of following diameter as per GS.[ As per approved list of Material ]

25mm dia 3 mm thick

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire of the following sizes in the prelaid polythene pipe as per GS.[ As per approved list of Material ]

4x(10 sqmm)+2x(6 sqmm)

SUPPLY & INSTALLATION OF VTPN DBs

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall as per GS( Make - Legrand )

4 Way ( Up to 160 A )

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA in existing Vertical DBs including necessary connection as per GS [ Make - Legrand ].

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [ Make -Legrand ]

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for Vertical DB enclosure with IP-42/43 as per GS

SUPPLY OF LIGHT FITTINGS

S&D of 240V LED luminaire complete with all accessories as follows:-

Single industrial box (thick ness of box should not be less than 22 SWG) type luminaire with CRCA body (Make :- Philips -TMC 501P 1xT-LED22W P3241/ Equivalent product of Crompton/Wipro having similar specification in all respect). incl S&D 1x 18 watts 4 ft LED tube lamp (Make:- Philips, Cat - Mas LED tube 1200 mm 18W865 T8 I 2100 Lumen PC Body/ Equivalent product of Crompton/Wipro having similar specification in all respect)

Twin industrial box (thick ness of box should not be less than 22 SWG) type luminaire with CRCA body (Make :- Philips -TMC 501P 2xT-LED22W P3241/ Equivalent product of Crompton/Wipro having similar specification in all respect). incl S&D 2x 18 watts 4 ft LED tube lamp (Make:- Philips, Cat - Mas LED tube 1200 mm 18W865 T8 I 2100 Lumen PC Body/ Equivalent product of Crompton/Wipro having similar specification in all respect)

Supply of recess mounted 2' x 2' LED luminaries .

Philips Model RC 380B LED 36S-6500 G4 L60W60 PSU OD WH OC/ Equivalent product of Crompton/ Wipro/ Jaquar having similar specification in all respect

SUPPLY OF FAN

Supply of 240 V 1200 mm (48") sweep A.C. ceiling fan (Five Star rated) without regulator having safety wire , P2 type capacitor incl. down rod, canopy & fan blades etc. complete in all respect. [Make: Crompton HS+ or HB+ / Orient Energy star /EPC / USHA Striker]

Supply of 230V AC, 18" (450 mm) sweep whole metal-body wall bracket fan (Make- EPC Electricals Pvt. Ltd.) complete with all accessories with P-2 type burst-proof capacitor.

Supply of Exhaust fans complete with all accessories having the following Model / Cat No. ( Make -EPC Heavy Duty)

12"( 300mm ) Speed 920 RPM

EARTHING

Excavation of soil for installation of Earth Electrode and filling & ramming.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. Long With TATA-Medium GI pipe as per GS

Connecting the equipments to earth busbar including S & F Solid GI (Hot Dip) wire of size as below as per GS 4 SWG

E.I work for Lift

Supply & Fixing of 415V. Earth leakage protection Four pole- Sensitivity 300mA 63 amp DX3 RCCBs ( Legrand Cat No. 411893 ) in Independent mounting 4 way Metal Encloser (Legrand Cat. No. 607884) concealed/surface on wall/ lift pit & mending goods the damages as par direction of E.I.C.

Supply & fixing 4 pole MCB enclosure with 1 no. 415V 63 Amp 4-pole MCB(Legrand) concealed in wall as per direction of E.I.C

Supply & fixing 2 pole MCB enclosure with 1 no. 240V 16/20 Amp 2-pole MCB(Legrand) concealed in wall as per direction of E.I.C

Supply & drawing 1.1 Kv grade 3x10 Sq. mm + 1x6 sq. mm. + 2x4 sq. mm single core stranded 'FR' PVC insulated & unsheathed copper wire (Make:- approved make) in 32 mm PVC rigid pipe (Make:- approved make) incl. necy. Fittings as required. (from Panel board to Lift Machine room for main power supply)

Supplying and fixing 250 V, 6-16A per way, 2+4 way SPN MCBDB with SS enclosure double-door with IP-42/43 protection with 40Amp DP Isolator as incomer and SPMCBs ('C' Curve, 10kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make- Legrand) 2+4 way enclosure, 32 A DP Isolator, 4 nos. 6-32A SPMCB].

Supply & drawing 13mm bore PVC pipe for protection of 4 SWG G.I. Earth Wire in underground trench including mending good the damages to original finish as far as practicable.

Supply & fixing G.I. earth busbar made of 25mm.x 6mm. M.S. flat with necessary numbers of holes including S&F 2 nos. Epoxy insulator as per direction of the Engr.-in-charge.

S&Drawing 1.1 Kv grade PVC insulated single core copper wire of following sizes in 20mm dia. PVC rigid conduit (ISI marked) with necessary jointing materials surfaced on wall by PVC bar saddle as per direction of Engr.-in-charge.

a)2 x 2.5 sq.mm. and 1 x 1.5 sq.mm

b)3 x 1.5 sq.mm

Supply and Fixing of power Board of suitable size having 2 nos. 6 pin 6/16 Amp. Socket with individual controlled switch (Anchor) fixed on suitable size of Sheet metal box with bakelite top cover and earthing attachment incl. S&F sheet metal box (16SWG) & 3mm thick bakelite top cover as per direction of E.I.C.

S&F 4”x 4”x 2 ½’’ ” M.S. box with 3mm thick bakelite top cover with 1 no. 15amp piano key switch (for controlling the Lift Pit Light).

S&F 16" dia 240V A.C. Wall cabin fan complete with all accessories(ORIENT/Crompton Graeves/Cinni) to be fixed on roof incl. connection as per direction of E,I,C.

Supply & fixing Bulkhead light fittings(Philips Cat.No. FXC-101-1xPLS/2P 9W AC GR or equivalent of Crompton/wipro) complete with glass shed, wire net guard including S&F 9watt Pl-s lamps( Philps ) on the surface of wall in the lift well as per direction of the Engineer-in-charge.

Supply & Fixing 230mm 940 rpm heavy duty exhaust fan(Make-EPC) of following sizes incl. louver shutter after making hole in wall and mending good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection.

Providing Spl. Type Hole by Hevy duty Electric operated drill machine in lift landing marbel & demolished the hard concreat cutting ( 12’’ ) & the 8mm /12mm TMT rod cutting by welding machine for passing the Staircase light distribution line incld. mending the damages as par direction of E.I.C.( At lift pit well)

Earthing the installation by 50mm dia(2’’) G.I.Pipe(ISI-M) as par G.S.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Supply & drawing GI (Hot Dip) earth wire of No.4 SWG on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

Supply & fixing 25mm.x 6mm Copper. earth busbar with necessary numbers of holes including S&F 2 nos. Epoxy insulator as per direction of the Engr.-in-charge.

S&Drawing 4x 4 sq.mm.. PVC insulated Multistrande bare copper wire in 20mm dia. PVC pipe(ISI marked) with necessary jointing materials surfaced on wall for in the lift pit as per direction of Engr.-in-charge.

Scaffolding charges for the work up to 5 storied incl. dismanteling after work as per dire.of EIC.( For lift pit well) ( For 5 Storied Building )

COMPOUND LIGHTING

Supply & delivery 9 mtr. long S.T. Pole ( 410SP30) incl. base plate with Pole Cap as per GS.

Erection of the above-said 9mtr. long Single Steel tubular pole of following height with sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly.

Extra on item above, for providing CC (6:3:1) base block (around the pole) dimension 0.45x0.45x0.60 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl. drilled hole in pole suitable for alkathene/polythene pipe entry, for street light wiring, without Loop Box.

Supply & fixing of twin arm bracket of 1.5 mtr. long made with 40 mm dia M.S pipe complete with M.S sleeve suitable for 9 mtr. long pole with required nut, bolt, washers etc. as per direction of E.I.C medium pipe

Earthing the ST pole with 50 mm dia G.I Pipe as per G.S

S&F CI water proof loop box size 200x150x100 mm deep having 4mm thick comprising of 250V 15A Porcelin kit kat fuse unit, 1 no 4 way terminal block upto 35 sq mm Stud Type Terminals or AC/DC Bakelite stud having lined with rubber gasketted CI top cover with brass machine screws, earthing terminal with lug on above pole etc. incl. anticorrosive painting and provision for bottom entry upto 4 core 25 sqmm Ar. cable.

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. (upto 9 Mtr. long pole)

a)1st coat of aluminium paint over 1 coat of RO Priming

b)2nd coat of aluminium paint over 1st coat

Painting Block Letters or Digits withing a circle/square as required, with "Black Japan" paint of approved make & brand, the size of letters and digits as given below.

a) Size 40 mm and upto 50mm

b) Size 50 mm and upto 75mm

S&L of 3 x 1.5 Sqmm PVC insulated & unsheathed flexible Cu. Wire (ISI marked, FR, Finolex Mk.) in 19 mm dia Polythene Pipe through pole arm from Loop-in-Box to fittings including fixing of wires & necy. connection with necessary jointing materials.

Supply & fixing following sizes of medium gauge GI Pipe (ISI-M) protection with necessary fittings and jointing materials

a) 40 mm dia

b) 80mm dia

Cutting the hard metal rod by special tools and tackles and experienced mistri and labour in presence of PWD's Officers.

Supply & fixing of 250V 135 watt street light luminarie (Philips cat no.- BRP322 LED 142 CW MR FG S4 XTFC L GR or equivalent model of Wipro/Crompton Greaves) on pole arm very carefully complete with all accessories incl. connection as per GS.

S/F 250V 40 W LED wall bracket/ street light fittings (Make- Philips, BRP409 LED CW 036 MR FG S1 PSU GR or equivalent model of CG, Wipro) on wall incl. S/F 25/40 mm dia GI pipe (appx. 1.5 mtr long) of swan neck type by clamping arrangement incl. connection by 3X 1.5 sq mm PVC insulated cu wire as per direction of EIC (for compound light).

S&F CI water proof loop box size 250x200x100 mm deep having 4mm thick comprising of 250V 15A Porcelin kit kat fuse unit, 1 no 4 way terminal block or AC/DC Bakelite stud having lined with rubber gasketted CI top cover with brass machine screws, earthing terminal etc. incl. anticorrosive painting and provision for bottom entry upto 4 core 25 sqmm Ar. cable. Loop box fixing on wall by brass machine screws/ clamping arrangement incl. connection as per GS.

Supply & laying 1.1 Kv grade 4 Core 25 sq.mm. XLPE/Ar. AL Cable (Make as per approved list) in following manner with earthing attachment in 2 x10 SWG G.I(Hot Dip) wire etc. as required incl. mending good the damages to original finish as per G.S.

on wall by saddling arrangement

in under ground tranch

Supply & laying 1.1 Kv grade 2 Core 10 sq.mm. XLPE/Ar. AL Cable (Make as per approved list) in following manner with earthing attachment in 1 x10 SWG G.I(Hot Dip) wire etc. as required incl. mending good the damages to original finish as per G.S.

on wall by shaddling arrangement

in under ground tranch

S/F compression type cable gland as per GS for 4 core X 25 sq mm Ar. cable.

Finishing end by solderless socket by crimping method as per GS for 4 core X 25 sq mm Ar. cable.

S & F single phase Timer DB for automatic ON/OFF split AC machine in 10 way SPNDB enclosure (Make-Legrand) and following accessorirs & wiring complete. i) 240V, AC, 32A, 2P Power contactor type MNX22-2P (Make-L&T)-2 Nos ii) Time switch FM Quartz Daily dial 15 minute interval settings (Cat No. J648 B1, Make- - L&T) -1no. iii) 25A, DP MCB (Legrand) - 1 Nos iv) 4 way terminal Block- 1No. v) 10A automatic Toggle switch - 1 no. vi) A.C. ON/OFF indicator- 1 set vii) ON/OFF push Button - 1set all interconnection wiring should be done with 1.5 Sq. mm FRLS copper wire end termination & making properly.

LIGHTNING CONDUCTOR

S & F Lightning conductor Air-terminals made of 15 mm dia 1500 mm long GI pipe (ISI Medium) having five prongs of 4 SWG GI (Hot Dip) wire at top with 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. duly grouted on the parapet etc. in CC mortar (4:2:1)

Cutting cornices/ steps etc. including cutting recess in buildings etc. & supply & fixing 15 mm bore (ISI-Medium) GI pipe protection as below and mending good damages to the building works:

(a) Length upto 0.5 Mtr

(b) Length above 0.5 Mtr

Making soldered joints between conductors and down pipes/ other metallic objects for 14 SWG GI (Hot Dip) wire including supply of necessary 4 SWG GI (Hot Dip) wire, jointing materials and painting with 2 (two) coats of bituminous paint

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, from ground floor to 5th floor.

Supply & fixing GI (Hot Dip) strips 20 mm x 3 mm thick for horizontal run on the Parapet/Roof/ Wall with GI Saddles 1100 mm apart incl. mending good the damages to building works

Supply & fixing of GI (Hot Dip) strips 20 mm x 3 mm thick for vertical run on wall with GI saddles spaced not exceeding 1000 mm apart incl. mending good damages to building work

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level by TATA-Medium GI pipe

1. The Agency must procure the materials from the manufacturer / OEM or from their authorized. sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. 2. Documents that authenticates such procurement form the manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the manufacturer /OEM / authorized sales channel to the e-mail of Engineer-in-charge and hard copy of it to be submitted during execution of work/submission of bill. 3. If any refurbished material is supplied and installed, penal action will be taken as per existing rules.

Defect Liability period 1 (One) Year

(Rates should be Quoted inclusive of all taxes & duities and L.W.C. @ 1% as applicable)

ULTRA ELECTRICALS AND ELECTRONICS

RASH ELECTRICAL WORKS

CHAKRABORTY ENTERPRISE