SUPPLY OF CONSTRUCTION MATERIALS AND

SUPPLY OF CONSTRUCTION MATERIALS AND MISC STORES

Shoes Long (Rubber) for Protection of foot for doing cement construction work

Hand Gloves rubber and inner with inner cotton cloth for protection to hand and of best quality.

Steel Wire Brush for cleaning of shuttering plates, compatible with hand grinder.

PVC Aluminum Cable seathed 2 Core x 10 sqmm 240 Volt and 92 mtr each roll , Make : Plaza/Philips/ V Gard/equivalent

Halogen Filament 500 watts suitable for halogen fittings 500watts. Make : Philips/Surya/Bajaj/Havels/C&G

M Seal No 55 adhesive in one kg pack.

Wooden Gurmala fabricated with teakwood 2' long and 3" wide with picking wooden handle.

Wooden Handle 3' long, 40mm dia at the bottom and sloping with 32 mm dia at the top. Fabricated with teak wood and smooth surface suitable for Kassi (Phawara)

Handle for Shovel GS 3' long and 32 mm dia at the top and slopping 20 to 25 mm dia at bottom. Fabricated with teakwood and smooth finish surface suitable for Shovals. The top provided with small horizontal handle for shoval of suitable dia and length for holding grip.

Wooden Handle 3' long, 40 mm dia at the bottom and slopping with 32 mm dia at the top. For making of teak wood smooth surface finish suitable for Axes pick head for 3 kgs

Protection gear for welding, one set of protection gear comprise of following:- (i) Hand free/ helmet type welding face protection screen. - 01 Nos (ii) Hand gloves pairs - 02 Pairs (iii) Welding apron full size - 01 Nos (iv) Goggles for protection eyes - 02 Pairs (flexible sizes/ replaceable to fit user reqmt)

Plum Bob Steel with nylone rope 3 mm complete set.

Measuring Tape steel 7.5 mtr long 25 mm wide.

Hammer Masion 500gm with smooth finish wooden handle scalping. Make : Taparia/Bennett/Marshal /pye

Brick/ Stone 500 gms Hammer one flat traditional face and short or long chiesl shaped blade with smooth wooden handle. Make : Taparia/Bennet/pye/marshal

Brick Layers Spirit Level with patented dead blow striking surface with anti slip wall grip, Mason's level type 196-2K,Make : Taparia/Bennett/Marshal /pye

Plier side cutting 250mm with insulated grip Make : Taparia/Bennett/Marshal /pye

PVC Flexible Pipe Transparent Leveling tube,(Water level pipe) 30 mtr long/roll.

Steel Gurmala 12 " long 4" wide with stainless steel blade, tang and wooden smooth finish handle

Stud for Corners made of teakwood size 4' long 4 " wide, 25mm thickness, fixed with handle and smooth finish. Stud would be used for making wall corner/finishing.

Polypropylene reinforced Glass Fiber Water Storage Tank 1000 ltrs cap (sintex tank 1000 lts) , Make : Renu/Jindal/ Orient/sintex

Double Ended Open Jaw Spanner set of six high grade alloy steel nickel based. Details of one set ( 06 spanner of different sizes) is as under:- (i) 9 mm x 12 mm - 02 Nos (ii) 13 mm x 14 mm - 02 Nos (iii) 19 mm x 22 mm - 02 Nos Make : Taparia/Bennett/Marshal /pye

Ring Wrench Spanner set with IS 2029/1998 size. Details of one set (04 spanner of different sizes) as under :- (i) 8 mm x 9 mm - 01 Nos (ii) 10 mm x 12 mm - 01 Nos (iii) 13 mm x 17 mm - 01 Nos (iv) 19 mm x 22 mm - 01 Nos Make : Taparia/Bennett/Marshal /pye

Angle Cutter wheel dia 100 mm (4”) load speed 11000 RPM, input power 850W, net weight – 2 kgs. Warrant for one year. (GSW Mini Cutter Grinder) Make: Dwelt / Hitachi/Booster/ Bosch

Aluminum Ladder folding heavy duty upto 10'height with made of aluminum alloy Make : Minimax/Alaco/equivalent

Hot Bitumen protection footwear for doing bitumen work (heavy boots that are heat resistant and non-slip (e.g. leather) Resistant to chemical agents. Free size.

Axe Pick head 3kg with one sharp and flat traditional face long and other side sharp nose with wooden smooth finish handle

Steel Bar Dye set with handle each set comprising of Dye pairs as under size (i) 8mm - 02 Nos (ii) 10 mm - 02 Nos (iii) 12mm - 02 Nos (iv) 20mm - 02 Nos of each pair with Handle – 01 set

Adjustable Wrench 100 mm high grade alloy steel , nickel based plating with brushed finish. Make : Taparia/Bennett/Marshal /pye

Hiring of steel form work for 60 days for sides of concrete foundations, footings, bases of column, raft/raft beams, retaining wall, parapet walls, suspended slab such as roof slabs, floors slabs of exeeding 200mm thick and not exeeding 600mm thick incl necessary all struting, bolting, nailing, wedging, easing, all support strut, braces, steel pipe for scafforlding, wire ties, clamps, working ladders etc complete all as specified.

Mild Steel TMT bars as in reinforcement 12mm dia conforming to Fe 500 IS-226 of 1975 Make : SAIL/ /AMBA/TATA/JINDAL or equivalent.

Bricks sub class `B' of size 230mm x 115mm x 75mm conforming to IS-1077- 1986 having smooth rectangular faces with sharp corners, metallic in sound and free from flaws and cracks.

Stone aggregate shall be crushed stone 20mm graded conforming to IS-383 1970 and shall be clean hard tough, durable and of uniform quality through out. The aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities.

Stone aggregate shall be crushed stone 40mm graded conforming to IS-383 1970 and shall be clean hard tough, durable and of uniform quality through out. The aggregate shall be free from soft disintegrated materials, vegetable and other organic impurities.

Mild Steel TMT bars as in reinforcement 20mm dia conforming to Fe 500 IS-226 of 1975 Make : SAIL/ /AMBA/TATA/JINDAL or equivalent.

Steel wire machine made nails of various size countersunk head and other end sharp and pointed.

Mild steel soft drawn binding wire annealed dia not less then 0.09mm SWG conforming to IS-10632 of 1983.

Turpentine Oil. Make : ASIAN/ SHALIMAR/BERGER.

Portland Pozolana Cement (PPC) 43 grade as per (IS-8041-1990) packed in 50 Kgs HDPE Bags conforming to IS 11652/2000 Make : ULTRA TECH/ AMBUJA/ACC/BIRLA or equivalent.

Fine Sand shall be clean, sharp, angular hard and durable free from adherent coating and shall not contain clay, mica and other impurities. The maximum quantities of clay and fine silt in sand shall not be more than 5% by mass as per IS-383-1970.

Paint Brush 2"

Paint Brush 4"

Lubricants for concrete mixture

K oil for Needle and plate vibrator

Integral water proofing compound conforming IS-2645 of 1975. Make : PIDILITE/JK or equivalent.

Loop Hole . Pre-fab mild steel loop hole size 750 mm x 600 mm of angle iron frame 40X 40 X 6mm, 6 Nos MS hold fast of MS Flat iron 25 X 5 mm,. 20cm overall length will be fixed. The loop hole shutter shall be provided with suitable bolting arrangement and shutters of opening to be divided into three Nos of parts made with MS Angle iron 35X35X6mm and covered with 12mm thick MS Sheet. Middle parts be of size 450x590mm and other two shutter be of blance equal size i.e. 145mmX590mm, all three shutters to be opened/closed in dependently and 2X100mm MS hinges to be provided at bottom of each shutter & 100mm Ms tower bolt and 100mm MS Handle to be provided as per drgs & specifications.

Pre-fab mild steel single leaf door of size 900 mm x 1900 mm frame andmade out of angle iron 40 mm x 40 mm x 6 mm and MS sheet 12mm thick of same size and with Chowkhat of MS Angle 50x50x6mm (975mm + 2 X 2025mm) and 4x125mm MS Butt hingle, with suitable strong 06x hold fasts of size 300 long over all size MS flat iron 30x6mm for embedding in concrete/wall as per IS-1038-1983. Doors to be provided with door stoppers, 02 Nos MS handle and 02x 20mm dia Sliding bolt fabricated type of 300mm long complete all as directed.

Steel door (01 No). Pre-fab mild steel single leaf door of size 900 mm x 1982 mm frame andmade out of angle iron 40 mm x 40 mm x 6 mm and MS sheet 12mm thick of same size and with Chowkhat of MS Angle 50x50x6mm (975mm + 2 X 2057mm) and 4x125mm MS Butt hingle, with suitable strong 06x hold fasts of size 300 long over all size MS flat iron 30x6mm for embedding in concrete/wall as per IS-1038-1983. Doors to be provided with door stoppers, 02 Nos MS handle and 02x 20mm dia Sliding bolt fabricated type of 300mm long complete all as directed.

Skilled steel fabricator for steel erection

M/s New Cee Kay Enterprises

MAHALUXMI ASSOCIATES

M/s Bhasin Brothers

TRIVENI SALES CORPORATION

GAURAV SALES CORPORATIONS