Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.9 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹24.5 L+₹2.6 L (11.8%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹24.7 L+₹2.8 L (12.7%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | L4₹25.1 L+₹3.2 L (14.5%)Rejected-AOC | L4 | Rejected-AOC L4 | |
| 5 | L4₹25.1 L+₹3.2 L (14.5%)Rejected-AOC | L4 | Rejected-AOC L4 |
Tender Value
Refer Docs
EMD Value
₹75,000
Closing Date
1 May 2021, 6:00 pmClosed
Shri Kislay Kishore, IDSE
GE (AFA) Hyderabad PIN-500043
Repairs and maint to Footpath Culvert Fencing and Painting of Footpath Dash lines and tarmac paint in Technical area for CGP related works at AFA Hyderabad
2021_MES_434102_1
8149/02/E8
Open Tender
Civil Works
Item Rate
GE (AFA) Hyderabad
As per tender documents
5 documents required · 5 mandatory
₹500
Yes
GE (AFA) Hyderabad
₹75,000
Yes
22 May 2021
2 Apr 2021
3 May 2021
2 Apr 2021
1 May 2021
16 Apr 2021
2 Apr 2021 - 15 Apr 2021
Amount
Dimantling post or struts (wood,steel, RCC)embedded in concrete any section including taking out embedded portion from concrete, brick work, masonary and making good disturbed ground
Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc and removing unserviceable debris off the premises complete all as directed by Engr-in-Charge.
Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided and removal of debrices off the premises complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water , etc and removal of debris off the premises complete all as specified and directed by Engr-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided all as specified and directed by Engr-in-Charge.
M & L cement concrete (1:3:6) type C 2 (40mm graded aggregate) as in foundations, filling and mass concrete etc all as specified and directed by Engr-in-Charge.
M&L for pre-cast cement concrete block masonry of (1:3:6)Type C1 (using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 etc complete all as specified and directed by Engr-in-Charge.
All as per item No.7 above but except PCC blocks all as specified and directed by Engr-in-Charge. Note: Serviceable PCC blocks obtained
M&L for Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4 all as specified and directed by Engr-in-Charge.
M&L rendering 15 mm thick in cement mortar (1:4 )on fair faces of brickwork or concrete surfaces, finished even and smooth without using extra cement all as specified and directed by Engr-in-Charge.
S&F in repairs galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc all as specified and directed by Engr-in-Charge.
Supply only chain link MS galvanised fencing of any size and type as approved by Engr-in-Charge
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire all as specified and as directed by Engr-in-Charge. Note :- The rate including for taking down existing fencing wire mesh any type
S & F Mild Steel works with angle iron posts and struts in fencing including cutting tops to shape as directed,drilling holes notching for wire etc ,flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc., and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and directed by Engr-in-Charge.
S & F 20 mm dia mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, n exc 15 cm long all as specified and directed by Engr-in-Charge.
M & L mild steel round bars as in , supports or stays for chain link fencing including hooking ends conforming to Fe 410-0 all as specified and directed by Engr-in-Charge.
M & L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded aggregate as in floor /subbase etc finished even and fair (without using extra cement), all as specified and directed by Engr-in-Charge.
M&L for screed bed or bedding layer of mortar 20mm thick for laying floor finishes in CM (1:6) etc complete all as specified.
M & L for cement concrete chequered self glossy tile of size 300X 300X25mm thick with grey cement and pigments,set jointed and pointed with new cement slurry to match complete all as specified and directed by Engineer in charge
M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and with pigment confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade laid over and including 40mm thick sand cushion all as specified and directed.
Preparation of new plastered surfaces of walls including cornices and applying three coats of white wash all as specified and directed
M&L for preparation of old existing concrete/bituminous surfaces of roads, runways,pavements and like not exceeding 10 cm width and machine painting with 1.5mm thick road reflective thermo plastic road marking paint as lines, dashes,letters arrows etc of tint white/golden yellow etc all as directed by Engr-in-Charge.
M & L for cement concrete Type B0 1:2:4 (12.5 mm graded aggregate) as in copings cills,lintles up to 1.5 m length ,bed plates ,kerbs etc including weathering slightly roundd or chamferred angles and throating all as directed by Engineer in charge
M & L for preparing old painted concrete surfaces of road side kerb stone including aeropane bases, and applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.
M & L for preparing old painted steel surfaces and applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.
M & L for preparing old plastered or unplastered surfaces on walls including cornices and applying one coat of cement based paint all as specified and directed by Engineer-in-Charge.
M & L for preparing old plastered or unplastered surfaces on walls including cornices and applying one coat of white wash all as specified and directed by Engineer-in-Charge.
Preparation of old tarmac/chequered/lnterlocking path surfaces/concrete surfaces including aeroplane bases and applying one coat of exterior emulsion paint (wheather coat) complete all as specified.
M&L for metal running welding in repairs, thickness of metal to be welded exc 6mm but not exc 9 mm after cleaning and preparing the surfaces to be welded together all as specified and as directed.
perfect electricales
M/s RAMA LAKSHMI CONSTRUCTIONS
sri ram construction
Sri Sai Krishna Construction
M/S NAVEEN BUILDERS
GUTHIKONDA BROTHERS
S J REDDY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .