Repairing of Internal Drain Old Colony at, Loktak.

Amount

Demolition of stone masonry below G.L upto floor two level including stacking of serviceable materials within 50 m lead. 13.16.1 Rubble masonry in cement mortar.

Demolition of brick work above G.L upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within 50 m lead. 13.11.1 In cement mortar.

Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 15m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. (b) Hard/Dense soil.

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in 1:2:4(1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size).

2nd class (Local 1st class) brick work in foundation and plinth in cement mortar 1:4 (1 cement :4 coarse sand).

Polygonal rubble masonry/R.R. masonry (uncoursed /brought to courses) squared rubble masonry (uncoursed/brought to courses) with hard stone of approved quality in foundation & plinth in cement mortar 1:6 (1 cement:6coarse sand) i/c levelling up with cement concrete 1:6:12(1 cement:6coarse sand 12 stone aggregate 20 mm nominal size) at plinth level.

12 mm cement plaster 1:4 (1 cement : 4 find sand).

Neat Cement Punning

Steel Reinforcement for R.C. work i/c. Bending, binding and placing in position complete.TMT bars.

Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for in-situ reinforced concrete and plain concrete work in flat surface such as suspended floor ,roofs landings and the like.

RCC work in beams, suspended floors, roofs having slope upto 15”landing, balconies, shelves, chajjas, lintels, plain window sills, staircases and spiral staircase upto floor five level i/c finishing and plastering the exposed surface with cement mortar 1:3 (1 cement: 3 fine sand) of thickness not exceeding 6mm to give a smooth and even surface but excluding cost of centering, shuttering, finishing and reinforcement, with- 3.2.2.1:1.5:3(1cement: 1.5 coarse sand: 3graded stone agggt.20 mm nominal size).

Flush or ruled pointing on stone work cement mortar 1:3 (1 cement : 3 fine sand).

Steel work welded in built up sections, framed work in cutting , hoisting, fitting in position & priming coat of red lead paint in gratings, framed guard bars, ladders, painting, brackets, and similar works.

Add EPF @ 0.65%

Add CESS @ 1%

Add GST @ 12%

M/S BALBIR SINGH LAKRA