Karnataka

Active

Works

Water supply/sewage lines

Drilling a new borewell, installing a 5.00 HP submersible pump set, providing an electricity connection, and laying a water supply pipeline at the 4th Cross of Shivaji Road in N.R. Mohalla, Ward No. 16, Mysuru City

Directorate Of Municipal Administration

DMA City Corporation Mysuru | Mysuru, Karnataka

Amount: ₹4.9 LCloses: 17 Sept 20267d left

Timeline

Published2 Sept 2026
Closes17 Sept 2026

Tender Value

₹4.9 L

EMD Value

₹14,600

Closing Date

17 Sept 2026, 4:35 pm7d left

Tender Inviting Authority

Office Inviting Bids

Directorate of Municipal Administration

Contact Person

Manjunath B

Mobile Number

Work Description

Drilling a new borewell, installing a 5.00 HP submersible pump set, providing an electricity connection, and laying a water supply pipeline at the 4th Cross of Shivaji Road in N.R. Mohalla, Ward No. 16, Mysuru City

Tender Information

Tender ID

DMA/2026-27/WS/WORK_INDENT62079

Reference Number

DMA/2026-27/WS/WORK_INDENT62079

Tender Type

Open

Product Category

Water supply/sewage lines

Form of Contract

Electronic Documents, First(One Cover)

Location

DMA City Corporation Mysuru

Source Website

Subscribe to view

Documents Required

2 documents required · 2 mandatory

Technical Bid

RequiredAnnual Turnover Certificate With UDIN Number

RequiredPWD Registration Certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPP portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and submission of the tender and the employer will in no case be responsible and liable for those costs.

The cost of the Tender Processing fee shall not be refundable

The authority reserves the rights to Reject or accept any or all the tenders without assigning any reasons

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the respective Standard Tender documents (uploaded)

The EMD will be released only after the Work Order

Tenderer in his name should have in the last five years i.e. (2021-22 to 2025-26), Achieved in at least two financial years an annual financial turnover (in all classes of civil engineering construction works only) 100% of Estimate cost.

Technical evaluation will be done as per latest KTPP act.

The successful Tenderer shall deliver to the Employer a Security deposit at the time of Agreement, in the name of the Executive Engineer, Ws & UGD East Division, MCC, Mysore for an amount equivalent to 5% of the Contract price plus additional security for the difference cost (below Estimate Cost) in accordance with the Conditions of Contract.

Any dispute regarding this tender appeal should be submitted through KPP Portal

Any changes/modifications if any will be notified/ updated through KPP Portal only.

As per PWD Code 251. Jurisdiction: Contractors registered under Class I and II may tender for works anywhere in the state. Contractors registered under Class III may tender for works within the districts of the Public Works Department circles where in they are registered. Contractors registered under Class IV may tender for works within the district or within the division whichever is applicable, where they are registered. These registrations are valid for all works undertaken by all the Government departments, Government undertakings in the respective jurisdictions. No separate registration is required in other Government departments and Government undertakings. This registration procedure is based on the single window concept.

Payment for the work is done under Mysore City Corporation grant. Bidder should accept the payment procedures as prescribed time to time by the Mysore City Corporation.

GST will be paid separately only for applicable items

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹14,600

Important Dates

Last Activity

4 Sept 2026

Published

2 Sept 2026

Download Ends

15 Sept 2026

BOQ Preview

•

Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

•

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

•

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

•

Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...

•

Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per ne...

•

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

•

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x2.5...

•

Cutting and threading G.I. pipes for pump fitting, public fountains with appurtenances., where the length of pipe laid is less than 6 metres Pipes of dia 32mm to 80mm

•

Clamps & M.S stay incl. b&n for 50mm

•

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments. Size 50 mm

•

Supply and delivery at site wrought middle steel (galvanized) GI plugs confirming to IS 1239-II, 1991 with latest amendments if any For 50 mm dia GI Union

•

Supply and delivery at site wrought middle steel (galvanized) GI plugs confirming to IS 1239-II, 1991 with latest amendments if any. For 50 mm dia GI Plugs

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap /basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Code...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour...

•

Providing Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement :3 coarse sand), finished with a floating coat of neat cement.18mm thick

•

Supply and fixing iron frame work fabricated out of MS angle iron and MS flat with bolt and nuts washers etc and painted with two coat of red oxide and the two coats of appprovd paint

•

Fabricating supplying and mounting MS box made out....SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped w...

•

Supplying and fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete., 63 Amps

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing aterials and C type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capac...

•

Supplying, fixing and wiring Earth Leakage Miniature circuit breaker (ELMCB) 240/450V upto 300mA sensitivity on existing wood/panel board. 50 : 32 : 40 Amps 4 pole

•

Supplying, fixing and wiring heavy duty low voltage capacitors confirming to IS 2834, 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery.Cost per KVAR

•

Supplying fully automatic star-delta starter unit push button type with suitable wires 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400/...

•

Supplying and fixing single phase preventer using necessary wires over an existing panel board suitable for motor upto 20 HP capacities.

•

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc., using 40mm dia 2.9mm thick 2.5 mtr. Long GI Pipe with GI funnel with mesh and suitable size reducer fixe...

•

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...

•

Supplying of 1.1 KV LT UG Cable XLPE or heat resistant PVC Insulated, PVC extruded, inner sheath armoured, UG LT cable as per IS - 1554 (part-1) or IS - 7098 part-1, Armouring strip thickness in aver...

•

Labour charges for Laying of 1.1 KV class UG cable in existing trench GI pipe/ store ware pipe, on wall/ on pole as required.6 sqmm to 16 sqmm.Bricks & Heavy Duty SFRC Cover & Frame: For 1.2m dia (in...

•

Providing and filling sand in excavated trench to cover already laid UG to a depth of 150 mm all-round the cable.

•

Supplying and fixing LT cast iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/ insulating compound complete with terminals, clamps, bolts,nuts and washers etc., 16 sqmm

•

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63A three phase 4 wire whole current class-1 Accuracy Energy Meter

•

Fixing of Energy Meter to IP Set, (where there is no pumphouse) where power supply is availed directly from the Pole to the IP set and weather proof meter housing box is required (including cost of WP...

•

Cutting asphalt Road surface by Machine cutting to demarcate the trench width of the surface.

•

Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the classifications for:Macadam Road.

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

•

Providing, laying and jointing HDPE pipes of specified grade andconforming to IS 4984-2016 with latest ammendments and conveyingto work site including loading and unloading at both destinations androl...

•

Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw-1.pdf

Tender Document • 0.60 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .