FOR INSTALATION OF 250 SECOND KVA, 33/0.4 KV STATION TRANSFORMER AT

Amount

The following works is to be carried out at 132 KV Sub Station Kanth Road

Eraction of ABL Structure on foundation required for erection of 33 KB bus Isolator as per relevant drawing including cost of labour and T&P etc.

Fabrication of complete structure of 33 KV fuse set with the help of channel, angle iron, post insulators etc. For protection of 250 KVA, 33/0.4 KV station transformer and its erection in proper level and alignment etc. along with painting with one coat of red oxide primer and two coats of aluminum paint (Berger Make) including cost of labour and T&P etc.

Erection of following equipments including shifting of material/equipment from store to erection site including all labour associated work to complete the job satisfactorily including cost of labour and T&P etc.

i) 250 KVA, 33/0.4 KV Station Transformer.

ii) 33 KV Bus Isolatior with J.B.

Laying of 3.5x400 Sq. mm. power cable size 500 mm. below ground level including excavation of trench and laying of cable and putting Ist class bricks on its 75mm. edge alongwith cable on both sides, filling the same with gauge, sand and then putting bricks on 115 mm. side over the trench and then filling with earth including cost of bricks, sand etc. and all other associated work to complete the job satisfactorily.

Termination of above power cable by providing proper size of aluminum Dowell/Jension make lugs, its crimping and connectiong with station transformer and LT cubicle including cost of lugs and all other associated works to complete the work satisfactorily.

Interconnection of following equipments and bus bar including cutting, bending of conductor and jumpering, damping alongwith all other associated work to complete the job satisfactory 33 KV Station T/F Bay. 1xPanther (1M)

Earthing of 33 KV Station T/F Bay equipments with 50x6mm. M.S flat including cutting, straightening, bending, laying 700mm. below inside ground and above ground for earthing of structure, T/F body and its neutral etc. including welding with main earthmat, excavation of trenches, its back filling, painting and all other associated work as required to complete the work satisfactorily excluding the cost of M.S. Flat.

Supply and complete erection of fuse set for 250 KVA, 33/0.4 KV station transformer with its structure in new Bay of station transformer and its proper setting for proper operation.

QASIM ENGINEERING COMPANY

TIRUPATI ELECTRICALS