Renovation of Type E Residential Bungalows in BARC Staff Colony, Tarapur for the year 2024-2026

Amount

Dismantling old plaster / skirting carefully , raking out joints and cleaning the surface for plaster including scaffolding disposal of rubbish to the dumping ground within 100 m lead

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead For thickness of tiles above 25 mm and up to 40 mm

Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

Dismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Of area 3.00 Sq.M and below and as directed by engineer.

Dismantling G.I pipes of all diameter external work including excavation and refilling trenches after taking out pipes manually / by mechanical means including stacking of pipes within 100 m lead as per direction of Engineer-in-charge

Dismantling plain cement concrete manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge.

Dismantling flushing cistern of any size including stacking of useful materials near the site and disposal of unserviceable materials within 100 m lead and as directed by engineer-in-charge

Dismantling of indian WC pan /european wc pan of any size including stacking of unused material near to site and disposal within 1000m lead and as directed by Engineer-In-Charge.

Dismantling of indian wash basin of any size including stacking of unused material near to site and disposal within 1000m lead and as directed by Engineer-In-Charge.

Providing and constructing Half brick masonry using bricks of approved quality / class, brand/ make in partition walls in C.M 1:4 (using crushed sand) including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications and as directed by the Engineer-incharge but excluding reinforcement up to plinth level and as directed by engineer. (Reinforcement will be paid under relevant item)

Providing 12 mm thick Internal plastering in cement mortar 1:4 without cement punning (using crushed sand) finished smooth, including sieving of sand to required fineness,preparation of the surface, scaffolding, curing all as per specifications, drawings and as directed at site complete.

Providing 20 mm thick plastering using Ready mix external plastering compound of approved make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge

Providing, wall painting with two coats on old/ new work premium plastic emulsion paint of approved brand and manufacturer) of required colour to give an even shade, including a coat of approved Cement primer ,including preparation of the surfaces, scaffolding complete as per specifications and as directed by the Engineer – In – Charge.

Providing and applying white cement based wall putty of approved make over concrete or plastered surface upto 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed by the Engineer-in-Charge.

Providing and painting TWO coats of synthetic enamel paint on Old/ new wooden surfaces of approved brand and manufacturer of required colour to give an even shade over an under coat of suitable shade primer of approved brand and manufacturer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and Painting two coats on old/ new of synthetic enamel paint on steel surfaces of approved brand and manufacture to give an even shade over a primer coat including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.. Concealed work, including cutting chases and making good the walls etc.

15 mm dia pipe

20 mm dia pipe

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

15 mm dia nominal dia

20 mm dia nominal dia

Providing and Fixing CP brass 100 mm dia shower rose with Shower arm of approved make as per specifications and as directed by Engineer-in-charge complete.

Providing and fixing C.P brass bib cock of heavy quality of specified / approved make as per specifications and as directed by the Engineer-in-charge 15 mm dia bib cock of approved type and make .

Providing and fixing C.P brass concealed stop cock of Heavy Quality of specified / approved make as per specifications and as directed by the Engineer-in-charge 15 mm n.b CP brass concealed stop cock of approved make.

Providing and fixing PVC inlet connection pipes heavy quality suitable for hot and cold including CP brasss unions and nuts 15mm dia 600 mm long.

Supply and fixing heavy quality hot and cold, three in one tap mixture value includng cost of material and labour charge approved MAKE by Engineer-in-Charge

Providing and fixing cast iron nahani trap / floor trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 No 125 mm dia C. P brass grating , complete all as specifications and drawings and as directed by the Engineer-in-charge

Providing and fixing Indian water closet (Orissa pan) of approved make with 100 mm China ware P or S trap, One no. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing white vitreous china European type Water Closet with 'P' or 'S' Trap with solid seat and lid of approved make, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge E.W.C. pan in White colour with ISI marked white solid plastic seat and lid.

Providing and fixing vitreous China wash basin of approved make and colour with C.I. brackets, 15 m C.P. brass pillar tap of approved make,15 mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge White vitreous China wash basin size 550 x 400 mm/ 550 x 420 mm and equivalent sizes with single 15 mm C.P. brass pillar tap

Providing and fixing vitreous China wash basin of approved make and colour with C.I. brackets, 15 mm C.P. brass pillar tap of approved make,15 mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge White vitreous China wash basin size 630 x450 mm and equivalent sizes with single 15 mm C.P. brass pillar tap

Providing and fixing stainless steel AISI 304 (18/8) satin finish kitchen sink with drain board with over all size of 1145 x 510 mm and bowl size of 560 x 410 mm and 241 mm depth of approved make and model with C.I. brackets and stainless steel waste coupling, fittings, including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever requried.complete as per specifications and as directed by the Engineer-in-charge

Providing and fixing 150 X150 mm heavy quality S.S soap dish case of approved make complete all as per specifications and as directed by the Engineer-in-charge

Providing and fixing heavy quality 304 grade stainless steel napkin Ring/Towel ring/ napkin Holder/ Towel Hanger crome finish wall mounted Round shape Napkin holder wityh tyhe weight of 0.210kgs having dianebtion of (L) 21.5x(B0 15x(H) 6.5Cm fixed to walls with 20 mm CP brass screws fitting arrangement all as directed by the Engineer-incharge.

Providing and fixing 15 mm C.P brass 2 in 1 bib cock and Angle cock combination of Heavy Quality of approved make as per specifications and as directed by the Engineer-in-charge

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing swan neck sink cock of SS 304 garde heavy duty of approved make and as directed by the Engineer-in-charge complete

Providing and fixing 40 mm dia PVC pipe 6kg/cm2 with elbow, Tee and other accessories

Providing , Laying , jointing, fixing and testing Heavy quality (C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples, reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydraulic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing Teflon tape, exposed / concealed by chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint for all concealed lines / two coats of synthetic enamel paint for all exposed lines all as directed by the Engineer-in-charge. Pipes with exclusive use of TATA make C-Class pipes 15 mm Dia

Providing, supplying, fixing in position, under floors or in walls sand cast iron pipes including required specials like bends, tees, 'Y' collars, cowl etc for soil, waste and ventilation pipes conforming to IS.1729 of approved make including cost of jointing with spun yarn and molten lead of specified quantity, caulking the joints, including testing of pipes, painting with primer, fixing atwalls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site. 150 mm dia sand cast iron S&S pipe as per IS:1729 with 1.20 kg lead / joint

Providing and fixing square mouth S.W. gully trap complete with CI grating brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm size gully trap "P" type

Providing and fixing minimum 17 mm thick gang saw cut mirror polished marble (premoulded and prepolished) machine cut marble for , window sills, facias , door frame and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edge to give high gloss finish etc. complete as directed by the Engineer-incharge at all levels

Providing and fixing minimum 17 mm thick gang saw cut mirror polished granite (premoulded and prepolished) machine cut ZEBRA BLACK colour granite for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edge to give high gloss finish etc. complete as directed by the Engineer-in-charge at all levels.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

Providing and fixing 1st quality ceramic glazed anti skid floor tiles of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness not less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Enginner-in-charge.

Providing and fixing using tiles of size 600 x 600 mm Glazed VITRIFIED floor tiles of approved make in different sizes conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 10 mm thick bed of polymer mortar (Adhesive)and jointing with grey cement including grouting with the joints with white cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge.

Providing and laying chequered / patterned tiles 300mm X 300 mm X 30 mm thick of approved make including levelling, curing, finishing and cleaning etc. complete to obtain required finish complete on 20 mm thick bed of cement mortar 1:4 (using crushed sand) as per specifications and drawings complete as directed by the Engineer-in-charge.

Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge Up to and including 300 mm Joists, 350 mm channels, and below sections using materials from Approved vendor of BARC

Manufacture, supply and installation of louvers made of 4 mm thick aluminium composite panels of approved make in the external vertical face and flush with the facade system for inlet of fresh air as per the design / details including all necessary aluminium (with minimum 25 micron thick anodisation) frames, frosted glass in louvers and fixing portion, sub frames, peripheral flashings to avoid any ingress of water inside the building with stainless steel bird wire mesh on the inside etc. complete as per details in approved shop drawing and specifications and as directed by EIC

Providing and fixing 35 mm thick flush door shutters conforming to IS : 2202 non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with internal teak wood lipping 25mm wide and fixing with 4 Nos of 125 mm long Stainless steel Hinges with S.S. wood screws complete.

Providing and fixing decorative high pressure 1.0 mm thick laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S including cost of adhesive, labour etc. complete as directed

Providing and fixing magnetic catcher double strip horizontal type 40 mm of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete .

Poviding and fixing FRP door shutters flush door / panelled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum 100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby la tch, aldrop, handles etc. wherever required and core filled with Polyurethane Foam and fixing w ith 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws 30 mm thick panelled door type of approved colours including the cost of ISI marked 100 mm heavy quality stainless steel butt hinges with necessary screws

Poviding wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing, making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the surface that will come in contact with walls, joining materials, labour etc. complete all as per s pecifications and as directed by the Engineer-in-charge. Second class teak wood

Providing and fixing cup board shelves or shutters using 18 mm thick prelaminated flat pressed 3 layer (medium density) particle board or graded wood particle board in shutter including 18 mm x 20 mm teak wood beadings at all sides with necessary screws ,handles,and other fittings all as per drawings and specifications and as directed by Engineer-in-charge

Providing and fixing pair of stainless steel "C" type door handles 10 mm dia, 125 mm long SS 304 grade solid rod , of specified size in steel doors/ wooden doors including screws / bolts etc. all as per drawings and specifications complete.

Providing and fixing pair of stainless steel "C" type door handles 10 mm dia, 250 mm long SS 304 grade solid rod , of specified size in steel doors/ wooden doors including screws / bolts etc. all as per drawings and specifications complete

Providing and fixing stainless steel aldrops of size 300 X 14 mm of approved make with necessary screws, bolting from rear side complete as per specifications complete.

Providing and fixing stainless steel tower bolts of size 250 X 12 mm of approved make with necessary screws etc.all as per specifications and as per drawings.

Providing and fixing tough & durable rim lock with two strong bolts having deadbolt and latchbolt with bigger keyhead and with 14 pin technology having weight of 900 gm. made from alloy steel with antique brass finish or approved finish with 4 keys along with lock plate, receptacle with 5 years manufacturers warranty etc complete as per the specifications and directions of Engineer-in-charge.

Removing and refixing of 35 mm Flush doors including removal, refixing and at time of removal and refixing all damaged parts should be replaced with new i.e Hinges, tower bolts, aldops, handles, door stopers, nightlatch etc. including cost of all materials and labour as per specification and approved by Engineer-in-charges

Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of rollers, handles and locking mechanism fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) and as directed by EIC Colour anodized aluminium section (minimum anodizing thickness of 15 micron)

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item) with bajra float glass of 5 mm thickness.

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item) with clear float glass panes of 5.00 mm thickness

Providing and fixing S.S. mosquito Jali 0.50 mm thick in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)

Providing and fixing 100 mm dia S.S. jali of approved make or as directed by engineer in charge.

Providing and fixing S.S garde 304 heavy quality coat hook of size 650 mm long in as per specification and as direction of Engineer-in-Charge

Providing and fixing Drapery curtain rod 25 mm S.S. rods of 1.25 mm thick with bracket fixed with brass screws and wooden plugs etc. werever neccery including all material and labours as per specification and directed by the Engineer-in-charge.

Shifting of materials from one place another place at the time of repairing of flooring and other miscellenious items when it is required and replace as same positioning after completion of work or as directed by engineer.

Providing and fixing box type mirrors of size 600 x 450 mm with shelves inside box of approved make , all as per specifications and as directed by the Engineer-in-charge .

Providing and fixing 6mm thick nylon rope colour and quality approved by Engineer-in-charge .

Providing and fixing corner glass shelf with cp brass bracket chrome (12''x12'') finish all as per specifications and as directed by the Engineer-in-charge .

Providing and fixing stainless steel 304 grade heavy sleek magnet door stopper with screw with heavy duty approved make and as directed by the Engineer-in-charge complete

Providing and fixing stainless steel tadi of size 250 X 12 mm of approved make with necessary screws etc.all as per specifications and as per drawings.

Supplying , Cutting to shape and fixing specified diameter UPVC pipes as per IS 4985 for drainage line for building for toilet and bathroom waste collection pipe including bend , L bow fitting etc complete all as per drawings and as specified at site. dia 110 mm UPVC pipe

Providing Core cutting in brick masonary wall up to and including 50 mm Dia with including of 50mm dia PVC pipe with end caps upto the length of drilling hole etc completed as per direction of Engineer in charge.

Providing and fixing 6 mm thick mirrors of size 600 x 450 mm of approved make with bevelled edges complete with 6 mm thick asbestos sheet back ground fixed to walls wit hC.P.brass screws and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge .

Providing and fixing high quality approved material of 304 grade Stain less steel Moduler Kitchen accessaries like Deterjent pull out, partition basket, pentry unit, cup and saucer basket,flying disc/ swing tray,grain trolley basket, bottle basket,babana stand ,glass tray plate tray,below kitchen platform with laminated marine play or water proof plywood with lamination shutter including all fixtures and fitting having required size as per drawing and as directed by Engineer -In-charge

for each modular kitchen of Following size (Length 3.00 x Breath 0.65 x Height 0.75)

for each modular kitchen of Following size (Length 4.4 x Breath 0.65 x Height 0.75)

Surface Preparation: All loose and de-bonded concrete/ screed shall be removed and proper repairing tobe carried with polymer modified mortar. Terrace water proofing: Clean the receiving roof surface with pressure water. All looseparticles, dirt & rub down to original hard surface.

Repair to screed cracks: Inspect for cracks over roof screed, roof wall junction, water drain inlets / outlets if any, and clean and moisten them. Crack’s width more than 0.5 mm having shrinkage crack up to 5mm width should be wide up to 5-6 mm with mechanical cutting machine and should be filled with Polymer Modified Mortar admixed with (volume) Styrene Butadiene co-polymer latex liquid 10 % by weight of cement. Fill all larger cracks more than 5 mm with polyurethane flexible sealant. Through and through cracks on the slab must be identified visually or by ponding which are more than 1mm and are visible on the RCC ceiling as well on the screed top and having drip leakages should be treated with PU sealant. Cut open the crack in square or U - groove manner up to minimum 6 mm size by mechanical cutter. Clean the groove with air blower to remove dust, dirt etc. Fill the cracks with PU Sealant after necessary cleaning.

Waterproofing: Apply one coat of primer composed of acrylic emulsion polymer as per manufacturers recommendation in SSD condition. Apply 1st coat of polyurethane dispersant based waterproofing coating of approved make without dilution spreading at the rate of 0.70/litre/Sq.mt/Coat until all surface is covered. Lay a 45 GSM Fibre glass mesh as a reinforcing material which is incorporated in the coating when the first coat is still in wet condition. Allow the first coat to dry for approximately 4 - 6 hours before applying the 2nd coat at 90° to the first coat. Ensure there are no pinholes or air bubbles on the membrane surface. Apply second coat of polyurethane dispersant based waterproofing coating without dilution spreading at the rate of 0.70 litre / Sq.mt /Coat to achieve total dry film thickness of 850 to 1000 microns at forced coverage at the rate of 1.40 litre / Sq.mt in 2 coats. Air cure the coating for 7 days. System shall have 12 years waterproofing warranty. Note – Coating should be terminated below the drip mould on the vertical surface

Removing & Repair of external loose plaster: Tapping the surface with a small hammer, check if the areas of existing plaster from RCC, Chajja, and Pardi etc are not bonded firmly to the surface with a hollow sound. Mark and remove with mechanical devices or manually at any height including raking out joints of Brick work without causing nuisance and cleaning the surface and carting away from the and location. Repair the area with cement polymer modified mortar in the ratio of 1:4 (washed crush sand) by adding Styrene Butadiene co-polymer latex liquid @ 10% by weight of the cement with rough finish, curing etc complete

Priming Coat: Providing, and applying single coat of exterior penetrating water-based primer composed of acrylic emulsion polymer primer for superior bonding after thorough cleaning of all laitance, loose material, oil, grease, etc. Allow the primer to cure according its technical instructions.

SUNLIGHT CORPORATION (BID ID -3100068)

M/S DATTATRAY CONSTRUCTION (BID ID -3099232)