Supplying and placing of furniture of different types of Chairs (Officers chair, staff chair, visitors chair), Sofa, Center Table from I.S.O. Certified Company to Economic offence at 5, Council House street, under City Division PWD, during the year 2

Amount

Supplying & placing of Mid back' Chair including all charges and taxes as per direction of Engineer-in-Charge. as per below mentioned specification:seat/back assembly: the seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal area back size 47.5 cm. (w) x58.0 cm (h)seat size 47.0 cm. (w) x 48.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. armrests :the one-piece armrests should be injection moulded from black co-polymer polypropylene. center tilt synchro mechanism: the mechanism should be designed with the following features: 360° revolving type. • upright-position locking • tilt tension adjustment • seat/back tilting ratio of 1:3. pneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm.telescopic bellow assemblythe bellow should be 3 piece telescopic type and injection moulded in black polypropylene. pedestal assembly:the pedestal should be injection moulded in black 33% glass-filled nylon-66 and fitted with 5 nos. twin wheel castors. the pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). 8.twin wheel castors:the twin wheel castors should be injection moulded in black nylon.

Supplying & placing of High back' Chair including all charges and taxes as per direction of Engineer-in-Charge. as per below mentioned specificationseat/back assembly: the seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal area. back size 47.5 cm. (w) x 69.5 cm (h)seat size 47.0 cm. (w) x 48.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. armrests :the one-piece armrests should be injection moulded from black co-polymer polypropylene. center tilt synchro mechanism: the mechanism should be designed with the following features: • 360° revolving type. • upright-position locking • tilt tension adjustment • seat/back tilting ratio of 1:3. pneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm.telescopic bellow assemblythe bellow should be 3 piece telescopic type and injection moulded in black polypropylene. pedestal assembly:the pedestal should be injection moulded in black 33% glass-filled nylon-66 and fitted with 5 nos. twin wheel castors. the pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). 8.twin wheel castors:the twin wheel castors should be injection moulded in black nylon.

Supplying & placing of Visitors' Chair including all charges and taxes as per direction of Engineer-in-Charge. as per below mentioned specification: seat/back assembly: the seat and back should be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with .fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal should be a. back size 47.5 cm. (w) x58.0 cm (h)seat size 47.0 cm. (w) x 48.0 cm. (d) .high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. 3. 3.armrests :the one-piece armrests should be injection moulded from black co-polymer polypropylene. tubular frame: the powder coated ( dft 40-60 microns ) tubular frame should be cantilever type & made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. m.s. er.w. tube.

Supplying & placing of 3 seater sofa including all charges and taxes as per direction of Engineer-in-Chargeas per below mentioned specification: 3SEATER:Total Length- 2070. Total Height- 900. Total Width- 940. STITCHING: THREAD- POLYESTER. PITCH- 5 Stitch per inch( Pitch of thread i.e. Stitch per inch). LEATHER/PVC/FABRIC: (PU/PVC/Cotton/ Polyester/ Composite)- FABRIC：D3/D5/D6 LEATHER LOOK FABRIC 100%POLYESTER. Thickness (mm) :0.9MM. Weight (GSM) : 250G/M2. Tensile Strength {wrap/weft} (Kg/cm) :NIL. Bursting Strength (Kg/cm2) :NIL. Colour Fastness to Rubbing {Dry /Wet} (Scale 1-5) :GRADE4. FRAME MATERIAL (TROPICAL WOOD / PINE WOOD/ RUBBER WOOD): SOLID PLYWOOD FRAME. Moisture Content ( 10 – 12 %) :Less than12%. Thickness of Plywood used(mm) :9MM/12MM/18MM/30MM. Standard of Plywood used: {Required Standard : IS 303 Commercial Plywood}. SEAT FOAM: (DENSITY, TYPE)- Thickness (mm) :100MM. Density (Kg/m3):30. Type of Foam (Virgin/Composite/Moulded/ Slabstock) :SEAT FOAM:5CM PURE FOAM 3030(30DENSITY)+5CM REBOND FOAM. COVERING :DECRON SHEET SPEC.150G 70G. BACK FOAM: (DENSITY, TYPE)- SOLID DECRON 7D/64MM. BELT/ WEBBING MATERIAL:NYLON WEBBING- Width of belt (mm) :BACK:45MM/SEAT:50MM.

Supplying & placing of 1 seater Sofa including all charges and taxes as per direction of Engineer-in-Charge as per below mentioned specification: 1SEATER: Total Length- 1080. Total Height- 900. Total Width- 940. STITCHING: THREAD- POLYESTER. PITCH- 5 Stitch per inch( Pitch of thread i.e. Stitch per inch). LEATHER/PVC/FABRIC: (PU/PVC/Cotton/ Polyester/ Composite)- FABRIC：D3/D5/D6 LEATHER LOOK FABRIC 100%POLYESTER. Thickness (mm) :0.9MM. Weight (GSM) : 250G/M2. Tensile Strength {wrap/weft} (Kg/cm) :NIL. Bursting Strength (Kg/cm2) :NIL. Colour Fastness to Rubbing {Dry /Wet} (Scale 1-5) :GRADE4. FRAME MATERIAL (TROPICAL WOOD / PINE WOOD/ RUBBER WOOD): SOLID PLYWOOD FRAME. Moisture Content ( 10 – 12 %) :Less than12%. Thickness of Plywood used(mm) :9MM/12MM/18MM/30MM. Standard of Plywood used: {Required Standard : IS 303 Commercial Plywood}. SEAT FOAM: (DENSITY, TYPE)- Thickness (mm) :100MM. Density (Kg/m3):30. Type of Foam (Virgin/Composite/Moulded/ Slabstock) :SEAT FOAM:5CM PURE FOAM 3030(30DENSITY)+5CM REBOND FOAM. COVERING :DECRON SHEET SPEC.150G 70G. BACK FOAM: (DENSITY, TYPE)- SOLID DECRON 7D/64MM. BELT/ WEBBING MATERIAL:NYLON WEBBING- Width of belt (mm) :BACK:45MM/SEAT:50MM.

Supplying & placing of Coffee Table including all charges and taxes as per direction of Engineer-in-Charge as per below mentioned specification: 1000*650*450 Color : cherry TABLE TOP MATERIALS & SIZE : (tempered Glass/ 10mm) L X W X T 1000x650x10mm Color : clear PACKING SPECS :Table Top carton size: 1040X690X40mm Qty : 1pieces per carton (1of 2) 5ply -_180 gsmTable leg carton size: 850X595X115mm Qty : 1pieces per carton (2of 2) 5ply -_180 gsmTop carton size mm Qty : -- pieces per carton (- of -) 5ply - gsm

Supplying & placing of Full Back With Headrest Chair including all charges and taxes as per direction of Engineer-in-Charge as per below mentioned specification:seat/back assembly: the cushioned seat assembly consshould be ts of seat outer (material-30% glass fiber nylon)& upholstered seat inner (material- poly propylene) with moulded polyurethane foam & polyster fabric. the net back should be made up of back outer (material-glass fiber filled nylon)& back inner (material- pp) and upholstered using polyester mesh fabric with high tenacity yarn. full back size: 46.5 cm. (w) x 60.0 cm. (h)seat size : 51.0 cm. (w) x 49.0 cm. (d)high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 +/- 2 kg/m³ and hardness load 12 +/- 2 kgf for 25% compression.back spine: the support spine should be made up of high pressure die cast polished hed aluminum. armrests : the armrest should be having two adjustment, height (6.0±0.5cm) and depth (6.0±0.5cm). height adjustment should be provided in aluminum structure of armrest which should be connected to aluminum back spine and should be operated by button. the depth adjustment should be provided in pad which should be fixed to armrest structure. armrest top should be made up of pu molded over plastic inner. active bio-synchro mechanism: the adjustable tilting mechanism should be designed with the following features: • 360° revolving type• front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort• tilt tension adjustment can be operated in seating position• 5 position tilt limiter giving option of variable tilt angle to the chair• seat / back tilting ratio of 1:2• the mechanism housing should be made up of hpdc aluminum & black powder coated (dft 40 to 60 micron) seat depth adjustment: seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 3.75±0.1 cmlumbar support assembly: the lumbar support assembly should consist of lumbar spine (material-glass fiber filled nylon) which should be fixed to aluminum back spine. the lumbar pad (material- poly propylene) should be fixed to lumbar spine through lumbar pad support. lumbar support assembly has height adjustment of 5.0±0.5cmpneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3cm.pedestal assembly with castors:the pedestal should be high pressure die cast polished aluminum and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. with castors.)twin wheel castors: the twin wheel castors should be injection moulded in black pp having 6.0± 0.1cm wheel diameter.the neckrest assembly consshould be ts of upholstered neckrest inner(material-polypropylene) with moulded polyurethane foam and polyster fabric.upholstered inner should be fixed to neckrest cover.neckrest should be fixed to back assembly through neckrest spine .neckrest assembly has height adjustment of 5.5 +/- 0.5cm and rotation adjustment of overall 20° +/- 2°

Supplying & placing of Visitors' Chair including all charges and taxes as per direction of Engineer-in-Charge as per below mentioned specification :seat/back assembly: the cushioned seat assembly consshould be ts of seat outer (material-30% glass fiber nylon)& upholstered seat inner (material- poly propylene) with moulded polyurethane foam & polyster fabric. the net back should be made up of back outer (material-glass fiber filled nylon)& back inner (material- pp) and upholstered using polyester mesh fabric with high tenacity yarn. back size: 46.5 cm. (w) x 60.0 cm. (h) seat size : 51.0 cm. (w) x 49.0 cm. (d)high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 +/- 2 kg/m³ and hardness load 12 +/- 2 kgf for 25% compression.back spine: the support spine should be made up of high pressure die cast polished hed aluminum. lumbar support assembly: the lumbar support assembly should consist of lumbar spine (material-glass fiber filled nylon) which should be fixed to aluminum back spine. the lumbar pad (material- poly propylene) should be fixed to lumbar spine through lumbar pad support. lumbar support assembly has height adjustment of 5.0±0.5cm tubular frame (3012ax): the powder coated (dft 40-60 micron) tubular frame should be cantilever type & made of ∅2.54±0.03 cm x 0.2±0.016 cm thk ms erw tube.

Supplying & placing of 3 Seater sofa including all charges and taxes as per direction of Engineer-in-Charge as per below mentioned specification : 3 seater-NOMENCLATURE & DIMENSIONS (mm): Total Length-1790.Total Height-850.Total Width-835. STITCHING: THREAD-POLYPROPYLENE.LEATHER/PVC/FABRIC:PU GERMAN LEATHER BN 3592.LEG MATERIAL:SOLID RUBBER WOOD.

Supplying & placing of Center Table including all charges and taxes as per direction of Engineer-in-Charge as per below mentioned specification: Dimantions-600mm(w)*1000mm(l)*428mm(h)**8mm(glass thk).Material=Glass of 08mm thk tempered,solid rubber wood legs & frame ,MS sheet as bottom shaf . Decoration materials- PU coateing to rubber wood parts clear glass.

Supplying & placing of High Back Chair including all charges and taxes as per direction of Engineer-in-Charge as per below mentioned specification: seat/back assembly: the seat should be made up of 1.2 ± 0.1cm thk. hot pressed plywood ocp-qlta-pl14-18.the back should be made up of injection moulded glass filled nylon & upholstered using net fabric with high tenacity yarn. seat size: 47.0 cm. (w) x 49.5 cm. (d)back size:45.0 cm. (w) x 65.3 cm. (h)high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density =55+/-2 kg/m³ and hardness 16 ± 2 kgf for 25% compression.armrests : the armrests have an up-down adjustment of 8.5 ± 0.5cm which should be provided in armrest structure. armrest top has an integrated layer of thermoplastic elastomer (tpe). lumbar support assembly: the lumbar support consshould be ts of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. the height of lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad. lumbar pad has an adjustment of 8.0 ± 0.5 cm in height.front pivot synchro mechanism: the adjustable tilting mechanism should be designed with the following features. • 360° revolving type.• single point control.• front-pivot for tilt with feet resting on ground ensuring more comfort.• tilt tension adjustment.• 4-position locking with anti-shock feature.• seat/back tilting ratio of 1:2.pneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm.pedestal assembly: the pedestal should be injection moulded in black 30% glass-filled nylon and fitted with 5 nos. twin wheel castors. the pedestal pitch-center dia should be ∅66.1 ± 0.5 cm (76.1 ± 1.0 cm. with castors).twin wheel castors: the twin wheel castors should be injection moulded in black nylon. the neckrest assembly consshould be t of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. neckrest should be fixed to back assembly through neckrest connector. neckrest assembly has height adjustment of 4.2 ± 0.5 cm and rotation adjustment of overall 76°± 2°. the complete neckrest assembly should be retro fit to the main chair.

Supplying & placing of Visitors' Chair including all charges and taxes as per direction of Engineer-in-Charge as per below mentioned specification: seat assembly: the seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded polyurethane foam. seat size: 47.0 cm. (w) x 48.0 cm. (d)back assembly: the back asembly. should be made of powder coated (oft 40-60 microns)tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. ms erw tube designed with contoured lumbar support for extra comfort. the back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. back size : 46.5 cm. (w) x 60.5cm. (h)high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression.armrests: the one-piece armrests should be injection moulded from black co-polymer polypropylene. tubular frame: the powder coated (dft 40-60.microns) tubular frame should be cantilever type & made of ø2.54 ±0.03cm. x 0.2 ±0.016cm thick m.s.e.r.w. tube.

Supplying & placing of Beat High Back Chair including all charges and taxes as per direction of Engineer-in-Charge as per below mentioned specification: SEAT/BACK ASSEMBLY: The seat & back is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18 ; upholstered with synthetic leather over moulded High Resilience Polyurethane foam. * HIGH BACK SIZE: 51.8 cm. (W) x 75.2 cm. (H) SEAT SIZE: 49.0 cm. (W) x 51.4 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density =55+/-2 kg/m³ and hardness 16 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The adjustable armrest is designed with the following features : • Up-Down adjustment– 8 steps (8.0±0.5cm range) • Height adjustable armrest structure which is chrome plated & fitted with an armrest top. • Fixed Armrest Top is PU moulded over metal insert. FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features. • 360° revolving type. • Single point control. • Front-pivot for tilt with feet resting on ground ensuring more comfort. • Tilt tension adjustment. • 4-position locking with anti-shock feature. • Seat/back tilting ratio of 1:2. BACK HEIGHT ADJUSTABILITY: Back can be adjusted in 5 positions by manually. Stroke of height adjustable spine is 7 cm. Back height adjustability is applicable for for High back and Mid back chair. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm.PEDESTAL ASSEMBLY WITH CASTORS: The pedestal is High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.)TWIN WHEEL CASTOR: The twin wheel castors are injection moulded in black PP. TUBULAR VISITOR FRAME (Visitor Chair): The tubular frame is powder coated ( DFT 40-60 microns ) cantilever structure & made of Dia.Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. Tube with a connecting M.S. Spine welded to it. Back spine is fitted to the frame assembly. OPTION OF SLIDING SEAT MECHANISM : Seat can be slide horizontaly as per user convenience. Stroke of seat slide is 5 cm. This option is available for revolving pedstal type of chair. Drive type 2 Bay optimizer ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA & GREENGUARD Certified Manufacturer as per approved drawing & design / secification of Engineer-in-chargeMain Body: (a) Construction: Body is made of CRCA Steel conforming to IS:513 Gr.D in Knock Down construction. The sheet thickness for the back & the shelves is 0.8mm while that of the sides & top is 0.9mm. For model 2 there shall be 6 loading levels formed by 5 nos. of adjustable shelves. Body units are bolted to undercarriage. Also, each body is bolted back to back for Twin mobile & side to side for multiple bays. (b) Size : Depth-457( mm) Width-1830(mm) Height-1980 (mm) (Body). Height with Undercarriage & Rails (mm ) Model 2 - 1980 + 65 + 35 = 2080. Finish: The body including shelves are given antirust surface treatment & are powder coated with epoxy polyester powder. It involves an 8 step treatment consisting of Hot water rinse, Knock of degreasing, degreasing, Cold water rinse, phosphating, cold water rinse, passivation & dry off oven treatment. Final finish consists of epoxy polyester powder coating of approved color & shade with a Dry Film Thickness of minimum 40 microns. The testing of paint is done for various physical & chemical properties as per IS:101. The material is then oven baked with a controlled temperature of 180 deg.C to 200 deg.C. Shelf: (a) Construction: It is made of 0.8 thk CRCA steel conforming to IS:513 Gr.D or DD. It’s max load bearing capacity is 80 Kg uniformly distributed per shelf but depending on configuration it changes. Please refer to the chart mentioned below giving breakup of allowable UDL per Shelf as per different configurations. Shelves are mounted on support brackets & shelf level can be adjusted at approx. 25.4 pitch. There are 5 adj. Shelves making 6 loading levels. (b) Size: Shelf Depth: Where unit Depth 457 mm Shelf Depth 415 mm.Undercarriage: (a) Construction: The Undercarriage is a Knock Down frame made of HR sheet 3.15 mm thk conforming to IS:10748 suitably fabricated to take the loads based on configuration. (b) Size: Sizes of Undercarriage : Single last – 1830 X 457 (Depth) X 1980 (Height).External Load carrying capacity per understructure DRIVE TYPE (Configuration - TYPE D3)-1200 Kg. Maximum. DRIVE TYPE . (c) Finish: The undercarriage, after pre-treatment, is coated with final finish consisting of epoxy polyester powder coat of approved color & shade with a Dry Film Thickness of minimum 40 microns. Fittings: (a) Centralized Locking: A Centralized locking arrangement is provided through Locking Stiffener mounted onto back of Single Last unit so that it gets locked on channels when all the units are brought together. Each Drive type units have Locking Knob near the Drive wheel for manual locking of individual units when a person is using those units. Knob shall be pressed inside when units are to be moved. (b) Fasteners: The nuts & bolts are galvanized / blackodized / Zn Plated. Aisle Space: Generally, for comfortable movements, the clear aisle space kept on the Drive Wheel side is around 915mm.Movements of the System: Drive Type Configuration (TYPE-D2): In this the system is mounted on a pair of channels. Movement of units is achieved mechanically through a Drive wheel and ‘SprocketChain-Tensioner’ arrangement mounted rigidly onto body side. Each movable understructure is provided with 2 Rollers on shaft for driving,2 antifriction ball bearings for rolling and 4 antifriction ball bearings for guiding between rails & ‘J’ section.

Supplying & placing of Mid Back Chair including all charges and taxes as per direction of Engineer-in-Charge as per below mentioned specification: SEAT/BACK ASSEMBLY: The seat & back is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18 ; upholstered with synthetic leather over moulded High Resilience Polyurethane foam. MID BACK SIZE: 51.6 cm. (W) x 65.7 cm. (H) SEAT SIZE: 49.0 cm. (W) x 51.4 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density =55+/-2 kg/m³ and hardness 16 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The adjustable armrest is designed with the following features : • Up-Down adjustment– 8 steps (8.0±0.5cm range) • Height adjustable armrest structure which is chrome plated & fitted with an armrest top. • Fixed Armrest Top is PU moulded over metal insert. FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features. • 360° revolving type. • Single point control. • Front-pivot for tilt with feet resting on ground ensuring more comfort. • Tilt tension adjustment. • 4-position locking with anti-shock feature. • Seat/back tilting ratio of 1:2. BACK HEIGHT ADJUSTABILITY: Back can be adjusted in 5 positions by manually. Stroke of height adjustable spine is 7 cm. Back height adjustability is applicable for for High back and Mid back chair. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm.PEDESTAL ASSEMBLY WITH CASTORS: The pedestal is High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.)TWIN WHEEL CASTOR: The twin wheel castors are injection moulded in black PP. TUBULAR VISITOR FRAME (Visitor Chair): The tubular frame is powder coated ( DFT 40-60 microns ) cantilever structure & made of Dia.Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. Tube with a connecting M.S. Spine welded to it. Back spine is fitted to the frame assembly. OPTION OF SLIDING SEAT MECHANISM : Seat can be slide horizontaly as per user convenience. Stroke of seat slide is 5 cm. This option is available for revolving pedstal type of chair.

SANKAR FURNITURE

Godrej And Boyce Mfg.Co.Ltd.

WELL DECOR