Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.5 LAccepted-AOC MES CHOWPATTI HASIMARA DIST JALPAIGURI WB PIN 735215 | HASIMARA | JALPAIGURI | WEST BENGAL | 735215 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹30.0 L+₹48,981 (1.66%)Rejected-Finance KHUDIRAMPALLY P O BANARHAT DISTT JALPAIGURI W B PIN 735202 | JALPAIGURI | WEST BENGAL | 735202 | L2 | Rejected-Finance Higher bid value | |
| 3 | L3₹34.9 L+₹5.4 L (18.2%)Rejected-Finance | L3 | Rejected-Finance Higher bid value | |
| 4 | L4₹35.3 L+₹5.8 L (19.8%)Rejected-Finance OLD HASIMARA DISTT JALPAIGURI WEST BENGAL PIN 735215 | HASIMARA | JALPAIGURI | WEST BENGAL | 735215 | L4 | Rejected-Finance Higher bid value |
Tender Value
₹39.9 L
EMD Value
₹79,800
Closing Date
29 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) Bagdogra
Commander Works Engineers (AF) Bagdogra Bagdogra Airport (WB) Pin- 734 421 Tele 0353 - 2698308
REPAIR MAINTENANCE INCLUDING RE CARPETING OF ROADS IN OMQ SMQ AREA UNDER GE AF HASIMARA
2023_MES_595267_2
8507/HAS/2023-24/E8
Open Tender
Civil Works - Roads
Item Rate
180 days
GE AF Hasimara
Please refer Tender Documents
10 documents required · 10 mandatory
₹500
GE (AF) HASIMARA
₹79,800
Yes
25 Jul 2023
13 Jun 2023
6 Jul 2023
13 Jun 2023
29 Jun 2023
15 Jun 2023
14 Jun 2023 - 15 Jun 2023
Amount
Note 1:- (Applicable for all parts/items) : The biidders/contractors are advised to read tender documents & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.
M&L for Scarifying or picking gravelled, macadam or bituminous macadam surfaces of area not exceeding 400 Sq.m and not exceeding 50 mm depth including raking over and grading the broken up surfaces to the proper camber etc. and removing the debris to a distance not exceeding 50 m and including preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all dirt etc. and applying evenly a applying evenly a priming/tack coat of cationic bitumen emulsion (RS-1) confirming to IS 8887 at a rate of 0.3-0.35 Kg/Sqm using mechanical sprayer complete all as specified and directed.
M&L for Premixed Bituminous Macadam laid / rolled and compacted to required gradient and camber [consolidate thickness 75mm or less] using paving bitumen of any penetration (Grade VG - 30) as binder with 4% by weight of total mix using Hot Mix Plant and Mechanical Paver, rolled and compacted with power road roller of 8 to 12 ton capacity to required camber and gradient complete all as specified and as directed.
Preparing BALCK TOP surfaces and concrete surface (if any) by brush-ing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed.
Applying evenly a priming/tack coat of cationic bitumen emulsion (RS-1) confirming to IS 8887 at a rate of 0.3-0.35 Kg/Sqm using mechanical sprayer complete all as specified and directed.
M&L Bituminous premix asphaltic dense concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient complete all as specified. Note: Minimum Bitumen content shall be 5.5% as specified here in above. Please note that if the actual quantity of bitumen to be incorporated on approval of Mix–Design is found more than the minimum bitumen content specified above, No price adjustment shall be made for actual bitumen content of Mix–Design. Bitumen shall be Paving Bitumen of Grade VG–30 or as per mix design and shall be procured by the contractor complete all as specified and as directed.
Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth but making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings complete all as specified and as directed.
M&L for Road Marking Strips, Lines, Dashes, Arrows, Letters etc of 2.5mm thick reflective type of colour white or golden yellow on roads, pavements and the like exceeding 75 mm wide with Hot Thermoplastic material by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe heater, driven by skilled operator on road surface including removing old paint of any description by suitable methods, cleaning the road surface of all dirt, scales, oil grease and foreign materials etc complete all as specified and as directed.
S&F in repairs Solar Road Studs [Bi-Directional] made of Aluminium Die cast matt finish of size 125 X 125 X 25mm [Approximately], working on High Efficiency Mono-Crystalline Solar Panel 2.4 V / 0.3 Watt, One Ni-Mh or NI-cd Rechargeable Battery [1.2V / 1600 MA] with Six Super Bright LEDs with 10,000 to 18,000 mcd [Millicandela], with a minimum Operating time of 3-4 consecutive days with full charge, viewing distance / visibility not less than 800m with 2 Hz Flash Rate, Self operated from Dusk to Dawn, anti twist ribs on the bottom anchor / shank with high intensity reflective grade polymer sticker and conforming to IS - 12063, of Colour yellow or red or blue or green or white as approved by GE complete all as specified and as directed.
S&F in repairs Road Stud as per IRC - 67 (cateyes) with LED (red/white) made of ABS plastic with beams two sides, fixed with high intensity grade retro reflective sheeting complete all as specified and fixed as per manufacturers instructions complete all as specified and as directed. Make:- 3M / Dark Eye or any equivalent make as approved by GE
S&F in repairs Road Side Flexible Delineator [Reflector] as per approved model and conforming to IRC - 67, made of highly flexible material [restores back to their erect posture even after being hit by a speeding vehicle without damaging them], fitted with 100mm PMMA reflector, which emit excellent reflection during night time, overall height of the reflector shall be of 1300mm with 3 reflective strips of colour Amber, Red or White, as approved by GE with 200mm dia base, 75mm dia pole, fixed with Bolts, Nuts and Epoxy Glue complete all as specified and as directed.
S&F in repairs Solar Road Side Delineator [Reflector] as per approved model and conforming to IRC - 67, made of Powder Coated MS Pipe, 50mm bore, 1000mm height, Heavy Grade, fitted with One Number Superior quality Solar Reflector made of Polycarbonate Round Body, Clear, UV Resistant with Four Super Bright LEDs of Colour Red / Blue / Yellow / White / Green, Flashing / Blinking / Still with 10,000 to 18,000 mcd [Millicandela], with a minimum Operating time of 3-4 consecutive days with full charge, viewing distance / visibility not less than 800m with 2 Hz Flash Rate, Self operated from Dusk to Dawn working on High Efficiency Mono-Crystalline Solar Panel 4 Volts / 0.6 Watt / 100 mAh, One Ni-Mh or NI-cd Rechargeable Battery [1.2V / 1600 mAh] with anti rust & anti theft steel net, fixed with Bolts, Nuts and Epoxy Glue, which emit excellent reflection during night time, with 3 reflective strips of colour Amber, Red or White, as approved by GE and duly embedded in PCC 1:2:4, Type B1 of suitable size fixing MS Post and earthwork etc. complete all as specified and as directed.
S&F in repairs Speed Bumps / Speed Breakers conforming to IRC - 67 of size 500 X 365 mm, 50 mm high, the material shall be Black/Yellow coloured and UV stabilised to keep perpetually colorful, Studded with reflectors on either side for clear visibility during night hours, fixed with nails supplied with the Bumps, grouting the holes with appropriate epoxy adhesive on the road surface and Bumps complete all as specified and as directed.
S&F in repairs Poly Carbonate Convex Mirror outdoor type 800mm dia made out of fibre along with bracket, Pole mounted and fixed to 80mm bore Medium Grade MS Pipe of required length complete and embedded in PCC 1:3:6, Type C1, including necessary earth work required for post holes complete all as specified and as directed.
S. G. CONSTRUCTION
M/S DEY ENTERPRISE
DEEP NIRMAN
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .