30/HDA/EC-ELECT/2025 2026

Supply & delivery of LED Flood light of following specification: a) 150 W (+/-5%) for each set (Maximum). b) Lumen output should be minimum15000 lumen from each set. c) The luminaries should be of IP 66 protection. d) In put Voltage of 130 V – 270 Volt, 50 Hz. A.C. supply e) Driver should have in-built protection against high voltage surge, open circuit & short circuit. f) Housing should be of Die-cast aluminium housing with epoxy powder coating and having cooling fins for effective heat dissipation. Separate cavity for driver & LED lamp. g) Operating Temperature: 50 Degree centigrade. h) Third party test report from NABL accredited laboratory of LM-79, LM-80 & IP-66. i) The product should have 5 years warranty period (Make.: Bajaj / Havells / Crompton/ Philips.)

Supply, delivery & installation of 10 M Height GI octagonal pole, 3.0 mm thick (BSEN 10025) Octagonal/ polygonal Mini-mast (single section 10000mm), Top dia-70mm, Bottom dia-175mm, and 1 no Full Moon Bracket suitable to mount min 4 nos. of non integral flood light fittings (with luminaries mounting plate and provision of passing wire) along with base plate -310mm X 310mm X 20mm, Foundation bolt-M24 X 750mm X 4nos ‘J’ type GI nut bolts, (IS 1367). Construction of shallow foundation of above 10 Mtr pole with M25 grade concrete for the high mast considering the safe soil bearing capacity (10T/Sq M @2Mtr depth) at site at suitable depth with all materials and labour. Erection of the above 10Mtr high Mini Mast and one number 2.5m long 40mm dia GI pipe earthing in house Terminal arrangement with cover for cable loop-in and loop-out. The rate should include testing at your works, all taxes and delivery the materials at different locations of HDA planning area.(Make:UTKARSH INDIA LTD/ VALMONT/ TRANSRAIL LIGHTING LIMITED/ BAJAJ ELECTRICALS LTD/ SKIPPER).

Supply, drawing and Connection of luminaries with 3C X 1.5 Sqmmpvc insulated FR copper conductor through the Poles from looping box to light fittings as required.(For Mini mast per Pole 2 Nos)[ Havells/Polycab/Gloster/ KEI]

Fixing only Street / Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure. (excluding the cost of RCC Foundation)

Supply and fixing of SPMCB "C" Curve 1-4 Amp with ISI marked to be placed on a din channel of Pole and connection with Terminal connector at the suitable location of the pole.(Legrand)(For Mini mast per Pole 2 Nos)

Supply and Installation of HDA printed logo suitable 15"×9" on GI Octagonal/tubular Pole, on brick foundation of meter box, feeder pillar box. (3 nos logo p/pole,per meter box,per feeder pillar box.)

Lifting of the running Under Ground Cable coming to the looping cable Boxupto the top of the muffing above the top of the ground level by drawing through 40 mm dia rigid pvc pipe of superior Quality and tiding the same by no 10 SWG G I wire wiyh the pole including supply of pipe & wire & filling the top of the pipe/pipe hole with bitumen and neat cementing properly (average run- 1.5 mtrs/run X 2 runs per pole).

Supply of 1.1 KV grade 4 C X 6 Sqmm XLPE aluminium armoured Cable, As per IS 7098. (Make - KEI/Glaster/Havells/Polycab.)

Supply, delivery, installation, testing & commissioning of single phase Feeder pillar box of size 1400 X 750 X 525 mm made of 3 mm x 6mm MS plate including suitable foundation with foundation bolt.coated outdoor tpye with top canopy,sides having lovers for ventilation,double door thick CRCA steel sheet with zinc powder coated outdoor type with top canopy, sides having lovers for ventilation, double door, complete with components iron clad busbar chamber on iron frame with 4 bars,415V,63A,4x20x5 mm and 1 no 4P 32 A MCB ,4 no 4P 16A MCB.1 no. timer switch model TSQ-100 type QTN,1 no contactor cat no- SS90910(or equivalent,1 no auto mannual selector,Push Buttom sets and 2 nos earthing with 50mm dia GI pipe. Installation of the feeder to be done by the earth cutting, brick soiling and cc foundation as required & sand filling, ramming and muffing around the feeder pillar box by brick and cement mortar work as per the direction of the Engineer-in-charge.

Supplying and Erection of additional foundation having Dimension of 600 * 600 * 600 mm C.C foundation (6:3:1) with graded stone chips (3/4" down) providing R.B. Net of 2" * 4" in size including neat cementing.