WBPWD/SGE/RAJ/NIeT-21/25-26_5

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Supplying fitting fixing 150mmx 50mm Brash Hinge

Supplying best Indian sheet glass panes set in putty (as per I.S specification) and fitted and fixed with teak wood beads and nails complete. (In all floors for internal wall & upto 6 m height for external wall) ii) 4mm thick.

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.b) Extra rate for each addl. Floor over the rate of ground floor.

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. ii) For other Structural works like galleries etc.

M.S. works in brackets made from flats, angles, tees etc. to sizes specialy bent, twisted, forged; making holes drilled and fitted to rafter of trusses with necessary bolts, nuts, washer or screws etc. (length of straight not less than 230 mm)

Drilling holes of requisite diameter in R.S. joists channels, tees. Plates etc. (b) (I) Dia.above 12mm and depth upto 10 mm.

Supplying, fitting, fixing bolts with nuts, washer: (ii) 20 to 25 mm dia bolt: (c) Length above 150mm.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety

Welding in M.S. structural work with gas or electric:(b) Continuous weld.

(B)Supplying & laying of approved make and brand of scratch proof, flexible & homogeneous P.V.C. Vinyle flooring conforming to IS:3462 - 1982 in required finish, fixed with synthetic acrylic adhesive after preparing the floor, levelling & smothaning when necessary with suitable putty, as per the design & instruction of the Engineer-in-charge.(ii) 1.5 mm thick (with stud / checkered)

(a) Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification [Cement to be supplied by the Department]

Venetian shutters of doors and windows as per design with valves fixed to valve and rod with plated hooks including cost of plated hooks and fitting, fixing shutters in position but excluding the cost of hinges and other fittings. (i) 50mm thick shutters with 19mm thick panel. (b) Ordinary teak.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar. a) 25 mm thick plaster.

Renewing cornice (with mouldings but without floral or similar intricate patterns) including necessary masonry work and 15 mm. thick cement plaster(1:4) complete (v) Projection (400 to 450) mm (c) Depth (325 to 400) mm (Cement 26.0Kg/Mtr.)

(ii) Projection (175 to 225) mm. (b) Depth (150 to 200) mm (Cement 8.0Kg/Mtr.)

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick).

Wooden venetian/ Louvered valves, fitted and fixed with plated hooks complete: (i) 19mm thick valves.(b) Ordinary teak.

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor (iv) 12mm

Labour for changing burgahs excluding mending damages.

Wood work in beams and burgahs fitted and fixed in position complete. (Cost for repairing of Damage to be paid separately) (ii) Sal : Malayasian. (Gr. floor)

Priming one coat on plastered surface with Alkali Block primer mixing with pre treatment coat ( P.T.C) of Akzo Nobel make including smoothening surface by sand papering, putty of approved make etc. complete in all respect as per direction of the Engineer In Charge.

(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. ( Two Coat).c) Super Protective 100% Acrylic Emulsion.

a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : With super gloss (hi-gloss) - (ii) Two coats (white in shade).

(iv) Two coats (with any shade except white)

(b) On steel or other metal surface :With super gloss (hi-gloss) (ii) Two coats (white in shade)

French polishing to wood work including preparing surface (High gloss) : (b) On old French polished surface including complete removal of the old polish.

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge.

Hire and Labour charges for providing suitable scaffolding (Bhara/Laddar) and removing the same as per direction of the Engineer-in-charge at different places under Governor's Estate.

Sub Total

Please Enable Macros to View BoQ information