Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.8 LAccepted-AOC 54 10 SHANTI NAGAR NEAR SHINDE CHATRI WANAVADI PUNE 411040 | PUNE | MAHARASHTRA | 411040 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹28.7 L+₹72,133 (2.58%)Rejected-Finance 401 SHRINAT HEIGHTS HADAPSAR ROAD SURVEY NO 97 MANJARI BK HAVELI PUNE 412307 | PUNE | MAHARASHTRA | 412307 | L2 | Rejected-Finance RATE HIGH | |
| 3 | L3₹31.5 L+₹3.5 L (12.6%)Rejected-Finance S NO 211 BEHIND SANE GURUJI HOSPITAL VIDHYA VIHAR HSG SOC HADAPSAR PUNE 411 029 | 411029 | L3 | Rejected-Finance RATE HIGH | |
| 4 | L4₹31.9 L+₹3.9 L (14.0%)Rejected-Finance | L4 | Rejected-Finance RATE HIGH | |
| 5 | L5₹32.2 L+₹4.2 L (15.1%)Rejected-Finance 10 MAKHAN LAL SADHUKHAN LANE PO PS BARRACKPORE KOLKATA 700120 W B | KOLKATA | NORTH 24 PARGANAS | WEST BENGAL | 700120 | L5 | Rejected-Finance RATE HIGH |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
24 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Pune
NO 1 GEN BHAGAT MARG PUNE 411040
8466 PERIODICAL SERVICES AND CERTAIN REPAIRS FOR JCOS ORS AND CIVILIAN MD ACCN AT ALC QTR CH COMPLEX GWALIOR LINE KT LINE OTP LINE ODL STAVELY ROAD UNDER AGE BR II OF GE SOUTH PUNE
2023_MES_619964_1
8466 GE SOUTH PUNE
Open Tender
Civil Works
Item Rate
270 days
GE South Pune
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE SOUTH PUNE
₹90,000
8 Dec 2023
21 Sept 2023
27 Oct 2023
21 Sept 2023
24 Oct 2023
6 Oct 2023
Amount
M&L for preparation of old decorative surfaces of walls including, cornices (plastered or unplastered) by brooming down and scrapping wherever necessary and applying one coat of white wash, complete all as specified and directed.
M&L for complete removal of existing treatment from walls & preparation of surfaces of walls by brooming down and scrapping wherever necessary and applying two coats of white wash on , complete all as specified and directed.
M&L for preparation of old decorative surfaces of ceilings including, cornices (plastered or unplastered) by brooming down and scrapping wherever necessary and applying one coat of white wash, complete all as specified and directed.
M&L for preparation of old decorated surfaces of walls by brooming down and scrapping wherever necessary and applying one coat of Oil Bound distemper white or tinted, complete all as specified and directed.
M&L for complete removal of existing treatment from walls and applying two coats of Oil Bound distemper over a coat of alkali resistence primer, white or tinted on wall, including preparation of surfaces, complete all as specified and directed.
M&L for complete removal of existing treatment from walls by scrapping, cleaning by water jet, soffits / facia of chajja / roof slab etc and applying two coats of Apex Ultima Weather shield paint, white or tinted over and including a coat of primer etc , complete all as specified and directed. Note:- Contractor has to give 3 Years Guarantee Certificate of Weather shield paint, if within guarantee period Apex removes / washout, contractor has to re-paint with the Apex
M & L for preparation of surface of any description (plastered and old decorated) over 10cm width or girth and applying one coat of Apex Ultima Weather shield paint, complete all as specified and directed.
M&L for preparation of old painted wooden surfaces exc. 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed
M&L for preparation of old painted wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description exc. 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
M& L for two coats of wall care putty, level and smoothen the surface and cure the first coat lightly once it dries apply the second coat of 0.5-1 mm thickness once the first coat is fully dried and set. The thickness of each coat should not exceed 1mm and total thickness of putty should not be more than 2mm, complete all as specified and directed
M&L for applying one coat of wall care putty, level and smoothen the surface, apply the putty of 0.5-1 mm thickness, complete all as specified and directed.
M & L preparing of old decorated surfaces of wall by washing, rubbing down & stopping of painted surfaces and applying one coat of cement base paint complete all as specified and as directed.
M & L preparing of old decorated surfaces of wall by washing, rubbing down & stopping of painted surfaces and applying two coats of cement base paint complete all as specified and as directed.
M&L for writing letters on PVC coloured sheet of size 450mm x 200mm x 6mm thick, writing letters / Numerical as directed by Engineer-in-Charge and fixing to Building with screws 4 Nos. Each, at up to 12m height of building, size of letter 80 x 125mm with Max of 4 letters complete all as specified and as directed.
S&F inn repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
M & L Water proofing treatment to sunken slab, walls, etc., shall be carried out as specified below and as directed by Engineer-in-Charge. (a) Clean the sunken portion of toilet / Baths / WCs / Kitchen thoroughly remove laitance, dirt, dust etc. (b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor by using polymer modified mortar (“ Dr fixit” Pidicrete URP” or equivalent). (c) Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bathseal Tape” and the gaps to be grouted with non-shrink cementitious grout “Dr Fixit Bathseal Grout” or equivalent Nahani traps etc to be fitted securely and the gaps around it to be grouted in the same manner. (d) Apply one coat of a Bitumen-modified polymer coating “Dr Fixit Bathseal Plus” or equivalent on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet and applying second coat of the same coating on the angle fillets and allow it to dry completely.
(e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first is dry. Extend the coating up to 150mm above the FFI. Above FFI, another cementitious waterproofing waterproof coating “Dr Fixit Pidifin 2 K” or equivalent will be further applied right up to 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and applying second coat after 6-8 hours and allow to dry completely. (f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed M 15 type B0 mixed with integral WPC (Liquid) laid to stope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2. (g) After completing plumbing work in the toilet / WC / Bath / Kitchen floor, tiling work (floor and dado) can be carried out by using suitable Tile Adhesives and ready to make tile grouts of approved makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc. (Note: Contractor will have provided all items are included in description except 1:5:10 lean concrete. Lean concrete 1:5:10 will be measured separately
M&L for PCC 1:5:10 type E2 (using 40 mm graded brick aggregate) as in lean concrete for filling sunken floor etc., complete all as specified and directed.
M&L for PCC 1:2:4 type B0 (using 12.5 mm graded brick aggregate) as in coving rounded, chamfered to sunken floor etc., complete all as specified and directed
Dismanling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to MES store yard and rubbish off the premises, complete all as specified and directed.
Dismantling of stone sett paving / PCC tiles or interlocking tiles of any description or thickness, laid bedded and pointed in any mortar, complete all as specified and directed.
M&L for vitrified ceramic tiles 8-10mm thick colour of size 600x600mm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM 1:6, complete all as specified and as directed.
All as per item No.22 above but as in skirting over 10mm thick backcoat in CM 1:4 including filleting on top edge in CM 1:4 etc., complete all as specified and as directed.
M & L for non skid joint free ceramic coloured (dark shade) tiles or size 300mm x 300mm x 7 to 8mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM 1:6, complete all as specified and as directed.
M & L for glazed colour ceramic tiles of size 300mm x 600mm x 7 to 8mm thick as in wall laid over and including 10 mm thick CM (1:4) backing coat including filleting on top edge in CM 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match with colour tiles, complete all as specified and directed.
Demolition of cement concrete in ground floor and pavings n. exc. 15 cm thickness (below or above GL), complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4 type B-0 (Using 12.5mm graded stone aggregate) as in floor, finished the surfaces fair & even to receive floor finishes, complete all as specified and directed.
M & L for granite 16-18mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, door cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed in CM 1:6, complete all as specified and as directed.
Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations, complete all as specified and as directed.
M&L for machine cut cuddappa stone 20 to 22 mm thick both side polished bedded & jointed in CM (1:3) laid over and including of 15mm thick screed bed in CM 1:6, complete all as specified and directed.
M & L Mirror polished kota stone slab flooring 20-25 mm thick, laid over and including 20 mm thick screed bed in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shed of slab including rubbing and polishing etc., complete all as specified and directed.
All as per Ser item No. 31 above but as in riser of steps, skirting, dado and pillars etc. laid over and including 10 mm thick CM (1:4) backing coat including filleting on top edge in CM 1:4, complete all as specified and directed.
Taking down cement plaster from old brick / stone masonry walls etc. including racking out joints, hacking for keys and scrubbing down with water complete all as specified and directed.
M&L for rendering 10mm thick in cement mortar (1:6) on faire faces of brick / concrete surfaces finished even & smoth without using extra cement, complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick / concrete surfaces finished even & smoth without using extra cement , complete all as specified and directed.
M&L for prepration of newly plastered sureface and applying two coats cement base paint complete all as specified and as directed.
M&L for prepration of newly plastered sureface and applying two coats oil bound distemper complete all as specified and as directed.
M & L for 15 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc including taking up or down steel tubing and connections, complete all as specified and directed.
M & L for 20 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc including taking up or down steel tubing and connections, complete all as specified and directed.
M & L for 25 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc including taking up or down steel tubing and connections, complete all as specified and directed.
M&L for cutting chases, pinning in, concrete block walling & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing and making good, cutting n. exc. 10 cm girth, complete all as specified and directed.
Disconnecting existing tanks, setting aside (or lowering if required) for Cleaning and removing all scales and dirt etc. from tanks and from mouths of circulating pipes etc. of 250 to 500 Itr (Capacity tanks including washing the tanks and draining out dirty water and hoisting if required reconnecting and re-fixing in position complete all as specified and directed by Engineer-In-Charge.
Disconnecting existing tanks, setting aside (or lowering if required) for Cleaning and removing all scales and dirt etc. from tanks and from mouths of circulating pipes etc. of 500 to 1000 Itr (Capacity tanks including washing the tanks and draining out dirty water and hoisting if required reconnecting and re-fixing in position complete all as specified and directed by Engineer-In-Charge.
S&F rotational moulded polyethylene water storage tank 500 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with and including tank nipple of existing size and 20 mm ball valve high pressure PTMT with rod & high density plastic ball including dismantling water tanks and removing to store complete all as specified and directed by Engineer-in-Charge
S&F rotational moulded polyethylene water storage tank 1000 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with and including tank nipple of existing size and 20 mm ball valve high pressure PTMT with rod & high density plastic ball including dismantling water tanks and removing to store complete all as specified and directed by Engineer-in-Charge
Taking down steel shutter of size n. exc 1.00 sqm by cutting by welding, chieselig etc and making good the disturbed portion complete all as specified and as directed.
S&F three track sliding window with two or more shutter witth 4 mm thick tinted glass , one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc by using following aluminium powder coated sections conforming to catalogue of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay complete all as specified directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & Verrtical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & Bottom 20844 (f) Glazing Clip 19352
S&F aluminium powder coated two track sliding window with two shutters of 4mm thick tinted glass of modigaurd including with good quality bearing, handle lock, rubber beading and glazing clips etc by using following aluminium powder coated sections conforming to catalogue of `Jindal Aluminium Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay complete all as specified directed by Engr-in-Charge. Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606, Interlocking – 20605, Top and bottom – 20604.
S&F aluminium powder coated ventilator with moveable louvers including 100mm wide pinheaded glass strip by using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, complete all as specified directed by Engr-in-Charge. (a) Frame - 20048 (b) Glazing clip - 19352
M&L for aluminium powder coated louvered ventilator with provision of exhaust fan including 100mm wide pinheaded glass strip by using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, complete all as specified directed by Engr-in-Charge. Frame - 20048 Glazing Clip - 19352
Taking down wooden / steel chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.
S & F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS tube, suppling and fixing in opening complete all as per specification and as directed by Engr-in-Charge
S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product Drawing given on relavent page of SSR Part-II 2020 Refer item No. 8080 as specified and directed by Engr-in-charge.
S&F 100 mm size stainless steel butt hinges medium weight, cold rolled, complete all as specified and directed.
S&F 150 mm size aluminium handles, cast type, anodised, complete all as specified and directed.
S&F aluminium anodised barrel tower bolt 150mm legth of excluded section, complete all as specified and directed.
S & F in repairs of plain fillet of 2nd class hard wood square, rectangular or triangular in section clean sawn secured with nails or brads sectional area exc. 13 but n. exc. 25 sqcm complete all as specified and directed.
S&F in repairs 18/19 mm thick pre-laminated particle board, interior graded, one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in shutter of cupboards / Kitchen cupboard / pelmets including with teak beading of all sides, complete all as specified and directed
S & F Continuous (piano) hinges 30 mm width of flap, mild steel, bright finish or electro galvanised, complete all as specified and directed.
S & F 100 mm long Hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screw, complete all as specified and directed.
S & F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished, complete all as specified and directed.
S & F Magnetic door catches for cupboard / cabinet etc, complete all as specified and directed.
Supply and fix in repairs, stainless steel plate rack of size 36inch x 31inch x 10inch, made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8), S S screws and round pipe, fixed to wall with screws complete all as specified and as directed.
S&F in repair 10mm thick corner glass with D bracket, complete all as directed.
S&F in repairs vitreous china wash down water closet pan, 'Pedestal' coloured, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinges devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.
S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rest, including with provision of concrete bedding & PVC flushing cistern 10 Ltr capacity including all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.
S&F in repair health faucet with 8mm dia, 1.2mtr flexible tube complete all as specified and directed. Make: Prayag / Shakti/ CERA
S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2, laid under floors with necessary socket, elbo & bend etc complete fixed to wall or in floors etc complete all as specified and directed.
S&F in repairs 10 Itrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle. aluminium brackets for bottom support fixing with gutties embeded in wall with drilling machine etc complete all as specified and directed.
S&F in repair brass CP wall mixer Non-telephonic shower arrangement screwed down for iron pipe of bore 15mm, complete all as specified and directed.
S&F in repair 15mm bore CP bib taps, brass chromium plated, cast copper alloy fancy type handle, screwed down, screwed for iron pipes, complete all as specified and directed.
S&F 20mm bore ‘D’ type brass CP tubular towel rail 60 cm long between flanges complete fixed in repairs, complete all as specified and directed.
S&F in repair CP pressure adjustable shower with revolving joint, complete all as specified and directed.
S&F in repairs Soap dish, brass chromium plated, complete all as specified and directed.
S&F in repairs stop valve brass chromium plated, fancy type, fixed to pipe of 15mm bore, complete all as specified and directed.
S&F stainless steel grating 75 to 100 mm dia suitable for nahani trap, complete all as specified and directed.
S&F PVC (SWR) 110mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall including demolition of old unserviceable breaking up drain pipes PVC or AC set in CM or solvent, complete all as specified and directed.
S&F PVC (SWR) 75mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall including demolition of old unserviceable breaking up drain pipes PVC or AC set in CM or solvent, complete all as specified and directed.
S&F in repair PVC (SWR) bends any radius 110 mm bore, complete all as specified and directed.
S&F in repair PVC (SWR) bends any radius 75 mm bore, complete all as specified and directed.
S&F in repair PVC (SWR) bends any radius 110 mm bore provided with access door, complete all as specified and directed.
S&F in repair PVC (SWR) bends any radius 75 mm bore provided with access door, complete all as specified and directed.
S&F PVC (SWR) junction, (Single Tee) equal or unequal 110mm bore, complete all as specified and directed.
S&F PVC (SWR) junction, (Single Tee) equal or unequal 75mm bore, complete all as specified and directed.
S&F PVC (SWR) vent cowl 110 mm bore, complete all as specified and directed.
S&F PVC (SWR) vent cowl 75 mm bore, complete all as specified and directed.
S&F PVC (SWR), 75mm dia outlet floor trap, plain with grating including jointing with solvent cement, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.
S&F in repairs stainless steel sink 1.00 thick suitable for kitchen or laboratory with plug waste pipe washers including cantilivers cast iron brackets connecting union etc over all size 495mmx420mm with bowl size 410mmx330mmx160mm, complete all as specified and directed.
GS Associates
Sunny Enterprises
A.S.ENTERPRISES
R k construction
ANIL CONSTRUCTION CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .