Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹76.0 L
EMD Value
₹1.5 L
Closing Date
29 Nov 2025, 11:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Krishna Bhagya Jala Nigam Limited
H B Konnur
Operation and Maintenance of Hydro Mechanical Components of Narayanpur Dam for two Years
KBJNL/2025-26/DA/WORK_INDENT2410
KBJNL/2025-26/DA/WORK_INDENT2410
Open
Dam and Allied works
Two Tender Document System(Two Cover)
KBJNL Division Dam Division Narayanapur
9 documents required · 9 mandatory
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
The intending bidder should have satisfactorily completed (at least 90% of the contract value) as prime contractor at least one similar work such as Maintenance of Dam/Barrage gates of amount not less than Rs. 44.82 Lakhs. The certificate should be issued by an officer not below the rank of Executive Engineer of the concerned Division / Equivalent officer and countersigned by the SE of the concerned Circle / next higher officer. The cost will be updated to the present value by giving a weightage of 10% each year, if the work is completed prior to the year 2024-25.
The intending bidder should have executed a minimum quantity of critical items of work (usually 80 percent of the peak annual rate of construction i.e. Quantity put to tender x 80 percentage in any one financial year, during the last five financial years reckoned back from 2024-25. Certificate should be obtained from an officer not below the rank of Executive Engineer of the concerned Division and countersigned by the SE of the concerned Circle.
BID CAPACITY The tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value
The bidder should have achieved a minimum financial turnover in all civil construction works of not less than the amount of Rs. 89.63 Lakhs.The turnover prior to FY 2024-25 will be updated to the present Price level by giving weightage of 10percent each year. Audited Profit and Loss account statement certified by a practicing Chartered Account bearing the UDIN along with copy of Income Tax returns filed for the years indicated above should be furnished.
The intending bidder should furnish liquid assets and or availability of credit facilities of not less than amount of Rs,26.89 Lakhs credit lines/letter of credit/certificates from Nationalized banks for meeting the fund requirements. Usually, the equivalent of the estimated cash flow for 3 months in the peak construction period should be in the below format.
A copy of Class-I KPWD Contractor Registration Certificate
The requisite Earnest Money Deposit in e-cash
Valid Employees Provident Fund Registration Certificate and remitted challan for last 6 months from last date of submission of tender.
Valid GST Registration Certificate mandatory and remitted challan for last 6 months from last date of submission of tender
₹1,900
₹1.5 L
12 Nov 2025
12 Nov 2025
1 Dec 2025
14 Nov 2025
15 Nov 2025
Operation and Maintenance of Hydro Mechanical Components of Narayanpur Dam for two Years
Providing and applying grease of approved quality to gate and hoist components requiring greasing as part of the annual maintenance using grease gun wherever necessary including cost of all materials,...
Providing and filling gear oil of approved quality upto the required gauge level for Radicon Gear unit of hoists / gantry cranes including cost of all materials, machinery, labour etc., complete with ...
Supply of Servo/MAK 220 lubrication oil to Radicon gear box of 84MT Gantry Crane including cost of transportation lead and lift etc and as directed by Engineer-in-incharge.
Providing and applying cardium compound of approved quality to wire ropes of hoists / gantry cranes as part of the annual maintenance including cost of all materials, machinery, labour etc., complete ...
Supply of 84MT gantry crane electrical/mechanical parts Input Pinion Shaft for 84 Tonne Gantry Crane 706 VCTX/Ratio 200:1 including cost of transportation and as per Directions of Engineer-in-Charge.
Supply of 84MT Old Gantry crane mechanical parts Shaft Couplings and Shaft including nuts bolts.etc, cost of transportation and as per Directions of Engineer-in-Charge.
Supply of 84MT Old Gantry crane mechanical parts Plummer Block SN 513 including cost of transportation and as per Directions of Engineer-in-Charge.
Rewinding of 10 HP monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period of not less tha...
Supply of Bearing 6308 size for 10HP motor including cost of all materials, machinery, labour etc., complete with all leads and lifts and as per Directions of Engineer-in-Charge.
Supply and delivery at site brand new best make Foot valve suitable for centrifugal pump upto 10HP confirming with ISI mark and its latest amendments including cost of all materials, machinery, labour...
Supply of HDPE pipe grade PE100-PN10.0, 90 mm including cost of all materials, machinery, labour, transportation etc., complete with all lead & lifts, loading and un loading and as directed by Enginee...
Supply and fixing the Impeller (Shell moulded with aluminium and bronze.)for 10HP motors including cost of all materials, machinery, labour, transportation etc., complete with all lead & lifts, loadin...
Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any For 100 mm dia GI BEND including cost of all materials, machinery, la...
Supply and fixing of Clamps for 100mm dia pipes including cost of all materials, machinery, labour, transportation etc., complete with all lead & lifts, loading and un loading and as directed by Engin...
Supply and fixing the flange for 10HP Motor, 100 MM dia pipe including cost of all materials, machinery, labour, transportation etc., complete with all lead & lifts, loading and un loading and as dire...
Supply and delivery at site wrought middle steel (galvanized) For 100 mm dia GI hexagonal nipple confirming to IS 1239-II, 1991 with latest amendments if any including cost of all materials, machinery...
Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...
Reaming/re-drilling of NX size hole in gallery foundation drain in downward direction including cost of materials, machinery, labours, water charges etc., (For Dam and Allied works)
Numbering of Blocks, Drainage Holes & Porus holes with ACP sheet of Size 0.40m x 0.3m on Spillway bridge parapet & drainage Gallery 1,2 & 3 including cost of material, fixtures, radium and fixing char...
Numbering of Blocks, Drainage Holes & Porus holes with ACP sheet of Size 0.20m x 0.20m on Spillway bridge parapet & drainage Gallery 1,2 & 3 including cost of material, fixtures, radium and fixing cha...
Cleaning gates / hoists / embeded parts for repainting by removing rust, old paint, grease etc. by using wire brush, scrubber, rust remover and applying a coat of rust inhibitive compound etc., comple...
Cleaning gates / hoists / embeded parts to expose fresh metal surface for repainting by sand blasting method as per specifications including cost of all materials, labour, machinery, scaffolding, appl...
Providing and applying one coat of zinc rich epoxy primer paint ( zinc content 90 % ) of approved quality 40 micron dry film thickness to gates /embedded parts /hoist components including cost of all ...
Providing and applying two coats of cold applied coal tar epoxy paint of approved quality 100 micron dry film thickness each coat to embedded parts / gates / lifting beam etc., including cost of all m...
Servicing of roller assembly of spillway stoplog elements of dam i.e.replacement of worn out parts such as O ring 8mm, bearing grease, bolts and nuts, other components etc including cost of labour,mac...
Supply of Spare: Wire rope ( confoming to IS-2266 ) of 40MM dia for Spillway Gates and 22mm Dia for River sluice gates including cost of transportation etc., complete with all leads and lifts
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...
Engaging Work Inspector/ Maistry or Supervisor for supervision of works at dam site etc., complete with all leads & lifts,loading & unloading and as per directions of Engineer-in-charge.
For inspection of wire ropes, turn buckles and rubber seals of Main spillway gates to carry out maitenance works etc :Lowering of 7Nos stoplog elements for one gate upto river bed and removing of stop...
For inspection of wire ropes and rubber seals of River sluice gates to carry out maitenance works etc :Lowering of 1 No stoplog gate element for one river sluice gate and removing of stoplog gate elem...
Supplying of AVRO Furniture Chair arm with Brown including cost of all materials, machinery, labour, transportation etc with all leads and lifts complete as directed by the Engineer-in-charge.
Supplying of Daze Furnitures Legs office Chair non revolving and non tilting chair with armrest including cost of all materials, machinery, labour, transportation etc with all leads and lifts complete...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
DTP KW3 format OM.doc
Tender Document • 0.76 MB
Tender Notification - KW3 Final.docx
Others - Tender Notification • 0.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .