Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹32.4 L
EMD Value
₹32,418
Closing Date
3 Jan 2026, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Add CEO Z P Washim
Zilla Parishad Washim
Remaining Work to Animal Husbandary At. Kasola Tq. Mangrulpir Dist. Washim
2025_WASHI_1263141_11
ZPWASHIM/WORKS/Tender NIT No.11/2025-2026/1stcall
Open Tender
Civil Works
Percentage
30 days
WASHIM
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,180
₹32,418
Works Division z p Washim
2 Sept 2026
25 Dec 2025
5 Jan 2026
25 Dec 2025
3 Jan 2026
25 Dec 2025
30 Dec 2025
Remaining Work to Animal Husbandary At. Kasola Tq. Mangrulpir Dist. Washim
Item No. 1 :- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means [Bd.A.1 P.No. 259] (S.S.R. I.No. 21.02 P.No. 148)
Item No. 2 :- Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. [Bd.L.8 P.No. 370] (S.S.R. I.No. 32.12)
Item No. 3 :- Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. [Bd.L.1 P.No. 367 ] (C.S.R.I.No. 32.34 P.No. 203)
Item No. 4 :- Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. [As directed by Engineer in charge.] (S.S.R. I.No. 35.21)
Item No. 5 :- Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. [Bd.P.6 Page No. 414] (S.S.R. I.No. 36.12)
Item No 6 :- Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. [As directed by Engineer- incharge.] (S.S.R.I.No. 35.13 P.No. 216)
Item No. 7 :- Providing and fixing solid core flush door commercial type on single leaf 16 mm thick Bison Panel cement bonded particle Board including Teak wood lipping beading on all four edges without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast,stainless steel fixtures and fastenings & handles on both sides & finishing with oil painting three coats complete. [As directed by Engineer in charge.] (S.S.R.I.No. 39.11)
Item No. 8 :- Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. [As directed by Engineer- in-charge. (SSR item No. 42.30)
Item No. 9 :- Providing and fixing on walls/ ceiling/ floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying & stacking the same in PWD chowky or as directed etc. complete. [BD.V 5 P. 551 & as directed by Engineer in charge] (SSR I.No. 42.56)
Item No. 10 :- Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying & stacking the same in PWD chowky or as directed etc. complete. [BD.V 5 P. 551 & as directed by Engineer in charge] (SSR I.No. 42.57)
Item No. 11 :- Providing and laying in trenches 25 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. [BD.V 5 page 551 and as directed by Engineer in charge] (SSR item No. 42.63)
Item No. 12 :- Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. [Bd.V.8/Page No.554 (SSR item No. 41.40)
Item No. 13 :- Providing, laying and fixing P.V.C. pipe of 75mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. [As directed by Engineer- in-charge (CSR item No. 42.27)
Item No. 14 :- Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. & spreading for embankment or stacking as directed. [MORTH 301] (S.S.R. I.No. 2.11 P.No. 85 )
Item No. 15 :- Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. [Spec.No. : As directed by Engineer incharge.] (S.S.R. I.No. 21.4 P.No. 152 )
Item No. 16 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation & bedding including bailing out water Steel centering formwork laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required & curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) [Bd.E.1 P.No. 287] (S.S.R.I.No. 24.01 P.No. 169)
Item No. 17 :- Providing and laying in situ / ready mix M-20 cement concrete of trap /granite /quartzite /gneiss metal for approach slab / Rigid pavement including compacting, finishing, curing etc. complete. (excluding reinforcement) (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ), cement 6.40 bags/cumt) [CD.15 P.No. 168 & B.7. P.No. 38] (S.S.R.I.No. 11.25)
Item No. 18 :- Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge. [Spec.No. RD] (S.S.R.I.No. 5.17)
Item No. 19 :- Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided. (Elect Mech CSR 23-24 PM 1-1-1) 1.50 HP
Item No. 20 :- Providing supplying & lowering laying jointing in standard lengths High Density Poly Ethylene pipes, confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint, including all local & central taxes, transportation and frieght charges inspection charges loading/ unloading charges conveyance to the departmental stores/ site & stacking the same in closed shade duly protecting from surays & rains, etc complete (MJP C.S.R. 23-24 PNo. 123, 125 I.No. 1, 2) a) 63 mm Dia 6 Kg/ Sqm (112+50= 162)
Item No. 21 :- Supplying and erecting flat flexible 3 core 4.0 sqmm PVC sheathed submersible type copper cable. (PWD Electrical CSR C.S.R. I. No. 12-4-9) 3 Core 4 Sqmm
Item No. 22 :- Supplying and erecting DOL starter to operate squirrel cage induction motor working on 380-440 volt 3 phase, 50 Hz with no volt coil and overload element with necessary material and connected to supply etc complete starter with original sheet steel encloser (M.J.P. 23 - 24 Elect./ Mech C.S.R. P. No. 38 LG1-1)
Item No. 23 :- Providing and fixing on walls/ ceiling/ floors, 80 mm dia.heavy grade having embossed as ISI Mark galvanised iron pipes weight of 10.15 Kg/meter with necessary fittings. and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. [Bd.V.5 Page No. 551] (S.S.R.I.No. 41.16)
Item No. 24 :- Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting as necessary and disposing off excavated stuff as directed etc. complete. [BR.3 P.No. 102] (S.S.R.I.No. 12.02)
Item No. 25 :- Excavation for foundation in hard murum including shoring and strutting as necessary and disposing off excavated stuff as directed etc. complete. [BR.3 P.No.102] (S.S.R.I.No. 12.04 )
Item No. 26:- Providing and laying in situ / ready mix M-15 plain cement concrete of trap /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of "V" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steel form work centering ( excluding dewatering by means of pump) and including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by engineer in charge basic rate shall be increased for height above 5.00 m in followinh manners (a) Height upto 5 M. (With Concrete Mixer)With fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) i) Height up to 5 m, normal rate.ii) Height 5 to 7.50 m, add 5 percent extra over basic rate. iii) Height 7.50 to 10 m, 7.50 percent extra. iv) Over 10 m Height, add 10 percent extra for every 2.50m rise. [MORT&H (5th Rev.) 1700, 2204] (SSR I.No 17.38)
Item No. 27 :- Providing and laying in situ / ready mix M-25 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) i) Height up to 5 m, normal rate. ii) Height 5 to 7.50 m, add 5 percent extra over basic rate. iii) Height 7.50 to 10 m, 7.50 percent extra. iv) Over 10 m Height, add 10 percent extra for every 2.50m rise. [BR.38(b and c) Page No. 135 and B. 7, Page No.38] (SSR I.No 14.15)
Item No. 28 :- Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. [BR.35 Page No. 134] (S.S.R.I.No. 14.01)
Item No. 29 :- Providing and laying in situ / ready mix M20 CC of trap/ granite/ quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in joints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) [BR.47(a) P.No. 140 and B. 7, P.No.38] (SSR I.No 14.39)
Item No. 30 :- Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete. [MORT&H (5th Rev.) 2705, 2706] (SSR I.No 17.37)
Item No. 31 :- Back filling behind abutment, wing wall and return wall as per drawings and technical specifications etc. complete. (by granular material) [MORT and H 2200 &-710.1.4 of iRC 78] (SSR I.No 12.70)
Item No. 32 :- Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 1000mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. [CD.7 Page.No. 162] (S.S.R.I.No. 11.12)
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.54 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.22 MB
BOQ_2176692.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .