Resurfacing of road from Udigala SH 81 to Aldur Gate SH 84 road from Km 0 00 to Km 4 00 selected reaches in Chamarajanagar Taluk and District SH 204 Job No CRIF KNT 2026 27 005

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness including with all lead and lift,cost of all materials, labour, usuage charges of machinery, loading & unloading, with all other incidental charges etc., complete..as per the direction of the Engineer-In-Charge for successful completion of work By Mechanical Means, In area of Light jungle.

Scarifying the existing bituminous surface to a depth of 50 mm and disposal of scarified material including all lead and lift,cost of all materials, labour, usuage charges of machinery, loading & unloading, with all other incidental charges etc., complete..as per the direction of the Engineer-In-Charge for successful completion of work . By Mechanical Means using Hydraulic excavator .

Compacting original ground supporting sub grade Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for subgrade construction including all lead and lift,cost of all materials, labour, usuage charges of machinery, loading & unloading with all other incidental charges etc., complete..as per the direction of the Engineer-In-Charge for successful completion of work

Construction of Embankment with Material obtained from Borrow pits Construction of embankment with approved material obtained from borrow pits laid in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross section including watering, consolidation by roller to the desired field density not less than 95% of maximum dry density including removal and disposal of top organic soil not exceeding 150 mm in thickness including with all lead and lift,cost of all materials, labour, usuage charges of machinery, loading & unloading, with all other incidental charges etc., complete..as per the direction of the Engineer-In-Charge for successful completion of work as per table 300-2 .

Granular Sub-Base with Close /Coarse Graded Material (Table:- 400-1) Plant mix method.Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 including protection of edges of GSB layer, cost of all materials, labour, usage charges of all machinery, lighting, guarding, barricading, maintenance of diversion road,including loading & unloading, all lead and lift with all other incidental charges etc., complete..as per the direction of the Engineer-In-Charge for successful completion of work ..(Compacted thickness)Grading-V Material (Close graded) As per job mix.

Construction of Wet Mix Macadum(Plant mix method) :providing laying, spreading and compacting of graded stone aggregates as per Table 400-12 & 400-13, to wet mix maacadam specification including pre mixng the material with water at OMC in mechanical mix plant , carriage of mixed material by tipper to work site , layin in uniform layers in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density of 98% including protection of edges of WMM layer, cost of all materials, labour, usage charges of machinery, lighting, guarding, barricading, maintenance of diversion road, ,including loading & unloading, all lead and lift with all other incidental charges etc., complete..as per the direction of the Engineer-In-Charge for successful completion of work Laying Using Motor Grader . (Compacted Thickness). As per Job Mix

Providing and applying primer coat with SS1 bitumen emulsion complying IS-8887 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.as per table-500-3, including cost of all materials, labour,usuage charges of machinery, loading, unloading stacking, Cost of material & labour charges hire charges of all machineries and with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work .

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 4mm thick Aluminium composite material sheet including lettering depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB 3.60mtrs high (min effective height 1.90 mtrs),3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67, including curing, cost of all materials all labour, lead, lifts, loading, unloading transporting etc complete with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work(iv)90 cm high octagon