PROVISION OF WIRE MESH SHUTTERS, MISC SANITARY WORKS IN BLDG NO P 132 P 140 AND P 141 AND PROVISION OF PATHWAY AND CERTAIN MISC WORKS AT CGRA KUNJATBAIL MANGALORE

Amount

Taking down chowkats or frames n exc 1.5 sqm each (without taking off shutters from the frames) complete all as specified & as directed.

Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each (without taking off shutters from the frames) complete all as specified & as directed.

Taking down Shutters of any description n exc 1 sqm each

Taking down Shutters of any description exc 1 sq. m but n exc 2 sqm each

Taking down and re-fixing of shutters in same opening n exc 1 sqm each complete all as specified and as directed.

Taking down and re-fixing of shutters in same opening exc 1 sqm but n,exc 2 Sqm each complete all as specified and as directed.

S&F second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified

S&F 2nd class hard wood, 35mm thick factory made door shutters plain framed, panelled shutter with lock rail and panel of 12mm thick veneered water proof particle board with commercial veneering on both faces the size of rails and stile as per IS -1003 kiln seasoned and chemically pressure treated complete all as specified

S&F for glazed and skelton shutters 30mm thick 2nd class hard wood, open rebated and prepared to receive glass, guage etc, (with sash bars) , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc complete all as specified

M&L preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M & L for preparing old treated wooden surface of any description over 10cm width or girth and applying one coat of Synthetic enamal paint complete all as specified.

M & L for preparing old treated steel surface of any description over 10cm width or girth and applying one coat of Synthetic enamal paint complete all as specified.

S&F MS bands, straps supports or stays for rain water and for hold fast for chowkats and other small articles all as specified

M&L for plain cement concrete (1:2:4) type B-1, (using 20mm graded stone aggregate ) as in hold fast block including necessary form work complete all as specified

S&F factory made PVC door frame of size 50 mm x 47 mmmade out of 5 mm thick plain colour, PVC sheet reinforced with MS square tube complete all as specified.

S&F factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified

S & F Butt hinges 100mm , extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified

S&F 75 mm size Stainless steel butt hinges fixed to frame complete all as specified

M&L for 150mm size aluminium handle (ISI Marked) cast type anodized, fixed complete all as specified

S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified

S&F 300mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring overall length of cover plate 140 mm and fixed complete all as specified

S & F in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

S & F powder coating (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F powder coating of any colour (Thickness or powder coating not less than 50 micron) Anodised aluminium window and ventilator shutters, three track sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S& F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer?in-charge.

S&F aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of apeture 1.40mm and fixed with aluminium wire stapples complete all as specified

S&F in repair aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of apeture 1.40mm and fixed with aluminium wire stapples complete all as specified

Hacking out old broken glass (any thickness, size quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified

S&F 4mm thick sheet glass , ordinary quality and glazing with oil putty in sqm n exc .5 sqm in each pane complete all as specified

M & L for cement mortor 1:4 Forming jambs , etc to openings (to foregoing item) , including cutting , toothing and properly bonding into old work, also facing , jointing and pointing to match existing work, complete all as specified

Taking up or down 20mm dia steel tubing and connections setting aside serviceable pipe for reuse and removing unserviceable pipe from site complete all as specified

Supplying and laying of 20mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified.

S & F in repairs Pillar taps fancy type 15 mm bore cast copper alloy, with capstain heads, chromium platedscrewed down high pressure, with or without lettered "Hot" of "Cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified.

S & F in repair Bib taps fancy type, Chromium plated for iron pipe and fixed 15 mm bore complete all as specified.

S & F in repairs for long body Bib taps fancy type, CP for iron pipe and fixed 15 mm bore complete all as specified.

S&F in repair Stop valves cast copper alloy 15 mm dia, fancy type, chromium plated, screwed down, high pressure, with crutch handle screwed both ends for iron pipe or for unions.

Supply and fix in repairs stop valves cast copper alloy, screwed down high pressure with capastan head screwed both ends 15 mm bore fancy type chromium plated with long shank and cup suitable for concealed type Complete all as specified

S&F PVC connection 15 mm size with PTMT nuts of lengths 450 mm, complete all as specified.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.

M & L wall mount 15mm dia bathroom mixture valve brass with chromium finish with 2 Nos handle that control both hot and cold water complete all as spefied

S & F in repair brass cromium plated shower rose 125mm with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed by Engr-in-Charge.

S & F in repair health faucet CP(hand shower type) with shut off valve (thumb or fush button type) to allow controlled and continuous flow of water with flexible polythene pipe of adequate length and with wall mounted pedestal for hanging faucet complete all as specified.

S & F in repairs CP Soap dish size 160 x 160x90mm fixed to plugs with CP brass screws.

S&F in repair vitreous china wash basin, white ,flat back , size 630x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and 32mm dia waste pipe complete all as specified

S&F in repair looking mirror of size 600x450mm, 5mm thick bevelled edge mounted on 6mm thick plywood including fixing with screws and cup washers.

S & F in repair Cabinet mirror size 332mmx145mmx 430mm with all fittings and accesseries all as specified and directed

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10ltrs capacity, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia. PVC flushing pipe,complete all as specified.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern), white , including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover, mild steel chromium plated hinging device complete but excluding flushing cistern including floor trap and making good damaged/disturbed surfaces complete all as specified and directed.

S&F in repairs plastic water closet seat, black,closed pattern with flat bottom and cover and mild steel chromium plated hinges device complete all as specified.

S &F in repair Brass chromium plated bottle traps 32mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed

S & F in repair toilet paper holder of stainless steel of size 10.5 cm x9cm fixed to walls with chromium plated (CP) brass screws complete all as specified.

S&F in repair brass chromium plated towel rail 20 mm dia, 'D' type 600mm long between flanges with brackets fixed to walls with brass screws.

S & F in repairs utensil rack (Plate rack) made out of 1 mm thick stainless steel of size 31 inch x 30 inch x 10 inch fixed to wall with chromium plated brass screw 30 to 50mm size including all internal fittings of untensil rack as per sample approveed by Engineer-in-Charge and as directed.

S & F grating doom 125mm dia with waste hole of PTMT (minimum weight 40gms)

S & F Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) complete all as specified and directed.

S & F Glass corner shelf for wall mount for bathroom complete all as specified and directed.

S & F Stainless steel towel stand for bathroom complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified

M & L Virified Ceramic tiles dark shade double charged/ultracharged of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.42 sqm but n exc 1.00 Sqm in floors, including bordering etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 20mm screed bed in CM1:4 complete all as specified and as directed.

All as per Item No 61 here-in- before but as in skirting over 10 mm thick rendering in CM (1:4) all as specified

S&F non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exc 0.18sqm but n.exc 0.38sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified.

S&F Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in cement mortar 1:4 complete all as specifed .

M&L 25mm thick cement concrete type B-O (using 12.50mm graded crushed stone aggregate) as in floors finished rough to receive floor finishes complete all as specified.

M & L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete.

Taking down cement plaster on brick walls including racking out joints haking for keys scrubbing down with water etc complete all as specified.

M & L for rendering 15 mm thick in CM 1:6 on fair surfaces of brick works/concrete surfaces finished even and smooth with out using extra cement complete all as specified

M&L for rendering 15mm thick in CM 1:4 on finished with water proofing compound @ 3% by weight of cement finish the surfaces even and fair all as directed. Note:- WPC will be measured and paid separately

Supply only integral water proofing compound

M & L preparation of finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified.

M&L for preparing new plastered surfaces of walls and applying two coats of oil emulson distemper over one coat of cement primer complete all as specified.

Dismantling water tanks and removing to store exc 500 but n exc 1000 ltrs complete all as specified

S & F water storage tank ISI marked of capacity 1000 ltrs hoisted and fixed in position including ball brass valves of 20mm dia, high pressure with polythene float and fly nut complete, screwed for iron pipe of brass ferrule and fixed in 20mm bore GI tube complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as specified.

S& F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified

S&F PVC (SWR) couplers 110mm dia including jointing with solvant cement, complete all as specified.

S&F 110 mm bore PVC (SWR) bends any radius including jointing with solvent cement, complete all as specified.

S&F PVC 110mm (SWR) branch piece, single (single Y) equal or unequal complete all as specified.

S&F PVC (SWR) pipes 75 mm dia single socketed in any length , with rubber rings, laid in floor or trenches complete all as specified.

S&F PVC (SWR) bends 75 mm dia complete all as specified.

S&F PVC Nahani Trap 75mm (SWR) floor trap, plain with grating including jointing with solvent or cement complete all as specified.

Demolition of cement concrete in ground floors and paving n exc 15cm thickness (below or above ground level) including plinth protection complete all as specified.

M&L 100mm thick PCC 1:3:6 Mix type C2 as in sub base/plinth protection and in path surface to be finished without using extra cement complete all as specified

M & L for type F2 PCC 1:7:12 (40mm graded aggrigate) with bricks as in filling of sunken slab after laying carrying out required tests for CI pipes joints complete all as specified.

M & L for preparing floor or cracked surface of concrete and applying any approved crake filler, Dr Fixiit ofr Decofill of FOSROC or equivalent as approved

M&L for cement concrete 1:2:4 type B0 using 12.5 mm graded aggregate in sunken floors 40mm thick complete all as specified.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified.

S & F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified.

S&F Fe 410W (Gde E-250) quality A for Roof truses (framed), trussed, purlins, crane grantries, rails and fasternings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, clests etc complete all as specified.

M&L for two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces of any description, not otherwise described over 10cm width or grith after preparation complete all as specified.

Removing plant/weeds from the roof tops/pipe lines and applying deweeding chemicals, removing rubbish off the premises complete all as specified.

M & L apply external surface of wall first coat of ShaliCryl® 215 over the primed surface @ 160 ml / Sqm. Add maximum of 10% potable water by volume for the first coat only, if required, to have brushable consistency only. Allow the applied coating to dry 6 – 8 hrs of application. Apply second coat of ShaliCryl® 215 without dilution over dried first coat @ 140 ml / m2 and allow it to dry. Do not undertake any further work over the coated area within 72 hrs of final coat

Taking down exisiting aluminum glazed shutter of any description for repair and fixing in the same opening after carrying repair work Note :(i) new materials required for replacement of old items shall be measured and paid seperately vide relevant item of SSRpart-II

M & L for preparing old surface of wall by brooming down or steel wire brushing, scraping down moss and efflorescent salt etc and applying one coat of arcylic exterior emulsion antifungal paint upto 4th storey complete all as specified.

Dismantling of Stone slabs and tiles laid bedded and pointed of any mortar of any description or thickness in floors, aprons etc complete all as specified.

Fixing/laying only dismantled Machine pressed precast concrete interlocking paver block(except tiles) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified.

Exacvations over areas by mechanical means n. exc. 1.5m deep and getting out in in hard/dense soil complete all as specified.

M & L Rolling & consolidating formation surfaces with 0.20 to 0.50 tonne hand roller

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.

M & L for 100mm thick cement concrete typeD2 1:4:8 (40mm graged aggregate) as sub base etc complete all as specified.

M & L for 100mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in hardstanding etc complete all as specified.

Supply & Laying of 60mm thick machine pressed precast concrete inter locking paver block any shape & size confirming to IS 15658-2006 of M-35 grade with grey cement and pigment etc complete all as specified.

M & L for sand filling under floors or in foundations including watering and consolidation etc complete all as specified.

M & L Boulder pitching is grouted with cement and sand mortar 1:6 packed tightly complete all as specified.

Excavataion in trenches width not exceeding 1.5mtr and depth not exceeding 1.5metre for foundations, not exceeding 10 Sqm on plan for manholes etc and getting out in soft/disintegrated rock, complete all as specified.

M&L for PCC 1:4:8 type D2 using 40mm graded stone agg as in fdn /mass concrete for wall and post struts complete all as specified.

M & L Walling of random rubble, uncoursed, well bonded, edded and solidly hearted, built in cement mortar 1:4 etc and extra over for random or polygonal rubble walling, brought up to course etc complete all as specified.

M&L for dressed laterite stone masonry, well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified.

M & L for flush pointing to random rubble masonry, in CM 1:3 uncoursed or brought upto courses complete all as specified.

M&L for PVC Pipe 75mm bore as in wipe holes laid in trenches and jointed complete all as specified.

M&L Rendering 15mm thick in CM 1:4 on fair faces of stone masonry finished even and smooth without using extra cement complete all as specified.

M & L for returing filling in incl spreading levelling watering hard/dense soil/ soft/disintegrated rock in layers n.exc 25 cm complete all as specified.

Removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified

M&L Preparation of new plaster surfaces and applying two coats of cement based paint over a coat of primer complete all as specified.

M & L for Providing cement concrete type B0 1:2:4 (12.5mm graded aggregates) for kerb stone including form work in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, bed plates and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M & L Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) parapets,wall copings, including use and waste of form work.

M&L for mild steel hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc, and similar work conforming to fe-290 Gde E-165. complete all as specified

Cutting and cleaning of bushes/ vegetations including roots from ground and removing rubbish material off the premises complete and applying weedant all as specified and directed by Engr-in-Charge.

M & L for Providing Cement concrete in surface channels and drains type B0 1:2:4 (12.5mm graded aggregates) complete all as specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified.

M & L de-silting and cleaning of open drainage of any size and depth not exc 0.90mtr and width not exc 0.45m including sludge/solid waste materials etc and disposing them to a distance exceeding 50 mtr and away from the premises of accommodations, wells water storage tanks etc, placing the manhole over over the manhole all as directed at site.

M&L 100mm thick PCC 1:3:6 Mix type C2 as in plinth protection and in path surface to be finished without using extra cement complete all as specified

M & L shifiting of LT/UG cables lines and making good and refixing/laid the same position after work complete all as specified

S&F LED Bollard 12 Watt garden light, aluminium die cast, WW in colour, rectangular/round in shaped with opal acrylic diffuser and IP 54 protection complete all as specified and directed. Make : Luker - LODBS12 or equivalent in other approved makes

Supply and fix post top lantern LED type 20 watt 230 volts AC WH/ WW outdoor type with decorativepost top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. including taking down old unserviceable lights complete all as specified.

M&L for GI bracket of 32/40 mm bore light grade bent to shape with 2 x GI clamps fixed on wall with metal fastners incl drilling of holes as reqd complete all as specified and directed by Engr-in-Charge.

S&F 3 Mtr Aesthetically designed decorative hot dipped galvanised mild steel step pole with grey powder finish. Compatible for post top lantern. Window - Plasma cut & duly hamfered opening window of 300 x 110 mm for terminal connections & mounting accessories including necessary concrete foundation for mounting of pole base and fastnuts/ bolts as required at site complete all as specified and directed. Make : Havells -3MECOPOLE or equivalent in any other approve make.

Material and labour for laying 3 core 4 sqmm PVC insulated and PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volts, for light connection complete all as specified

S&F Double wall corrugated High Density Polymer Ethyl (HDPE) pipe of size 40 mm outer dia for laying of electric cable in trenches, wall, floor including suitable size MS saddle for mounting of wall and other connected accessories complete all as specified and directed.

Supply, lay, testing and commissioning 10 Sqmm 4 Core UG cable XLPE insulated, armored heavy duty electric cable, 1100 volts grade with stranded aluminium conductor in trenches including suitable size of double grip cable gland and joiinting etc complete all as specified and as directed

All as per item No 133 here-in-before but in 6 sqmm 2 Core complete all as specified and directed.

Excavation in trenches not exc 1.5m in wide and not exc 1.5 m in depth and getting out in hard/dense soil for laying of cables all as specified and directed.

Supply and lay river sand in trenches for cable protection, spreading, levelling, Punning and consolidating complete all as specified

Supply and lay old bricks sub class A for cable protection laid trenches all as directed

Supply and lay GI pipe medium grade 40 mm dia as cable protection laid on trench/floor, fixed on pole/wall etc complete all as specified.

S&F Thermoplastic polycarbonate cable Junction box IP-65 of size 210 x 155 x 102 mm outdoor type duly fixed with MCB SP 16 A and suitable for entry and exit of cable size upto 16 sqmm complete all as specified and as directed. Make : HENSEL or equivalent in any other approved make.

KOTIAN -ECC (BID ID -3386944)