SPL REPAIR OF BLDG NO. T-69 AT W-WING AND PROVN OF TRAINING SHED IN CERTAIN UNIT AT AGE B/R-II AND AGE E/M BABINA UNDER GE BABINA.

Amount

Demolition of PCC in any description and in any position etc complete all as specified and directed

M&L for 75mm thick cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L PCC 1:4:8 type D2 using 40mm graded stone agg as in filling and mass concrete, Sub base/flooring complete all as specified and directed.

M&L for maroom/red bajri filling under floors or pavings, laid in layers n exc. 15 cm thick spread, levelled & rammed including watering complete all as specified and directed.

M&L, for PCC 1:2:4 type B-1 using 20mm graded stone agg as in coping on side of path/Hard Standing including necessary form work etc complete all as specified and directed.

Dismantling AC sheet roofing with ridge (corugated or semi corrugated) complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating AZ-150 GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating AZ-150 GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Taking down and re-fixing including erection of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290 Gde E-165 complete all as specified and as directed.

S&F Rolled mild steel Roof trusses (framed), trussed purlins crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. GDE Fe410-0 or Fe 310-O complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pump, insulation etc,) or insulation boards of any thickness including cover fillets complete all as specified and directed.

S&F Powder coated galvanised MS grid frem work false ceiling of (main T size 32mmx24mmx0.45mm cross tee 24mmx24mmx0.35mm & wall angle size 19mm x 19mm x0.35mm with slot for fixing including suspended with 2mm dia GI wire hangers fixed with steel dash through fasteners from purline of the roof complete all as specified and directed.

S&F 4mm thick high pressure steam cured (HSPC) preprime non asbestos fiber cement designer board of size 600mm x 600mm /595mm x 595mm decorative finish as in ceiling complete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6), rise of hight for brick wall complete all as specified and as directed.

M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.

Cutting openings, through brick walls built in CM or cement lime mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing & removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc., to store and rubbish not exc. 50m complete all as specified and directed.

S&F in repair 500 ltr 3 layer white colour rotational moulded polyethylene cylindrical vertical with closed top water storage tank including 20mm PTMT ball valve and gate valve hoisted and fixed in position on new or existing foundation complete all as specified and directed.

S&F 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Taking up or down existing 15 mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed

Taking up or down existing 20 mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed

Supplying, fixing, jointing and testing galvanised iron 15 mm dia bore tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed

Supplying, fixing, jointing and testing galvanised iron 20 mm dia bore tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and complete all as specified and as directed.

M&L for double charged vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of each tile exceeding 0.36 sqm but not exc 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc including 15 mm screed bed with CM(1:6) complete all as specified and as directed.

M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square/rectengular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc and including 15 mm screed bed with CM(1:6) complete all as specified and as directed.

M&L for joint free glazed coloured tiles 300x600, 7mm thick for work on vertical surface, set & jointed in cement slurry and pointed in white or coloured cement to match etc including 10 mm screed bed with CM(1:3) complete all as specified and as directed

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick in CM(1:6) etc complete all as specified and directed.

Demolition of Roofs, floors (other than ground floors), beams staircases, landing, chajjas, & similar suspended work Cement concrete (reinforced).

M&L for Roughly squared stone lintels hammer dressed on face and soffits, hoisted, set and pointed in cement mortar 1:6 complete, n exc 3m in length complete all as specified and directed.

M&L for toothing and bonding with cement mortar (1:6) for openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed.

M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.

Taking down cement plaster on brick or stone wall including raking out joints, hocking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of wall even and smooth finish without using extra cement on conc/brick surfaces in CM 1:6, complete all as specified and as directed

M&L for Preparation of new plastered surfaceof wall and applying two coat of OBD over a coat of alkali resistant primer over one coat of putty complet all as specified and as directed.

M&L for applying Two or more coats on new plastered surface of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over 1mm thick wall putty (for external suface) complete all as specified and directed.

M&L for complete removal of existing treatment from surface of wall all as specified and as directed by the Engineer-in-Charge

M&L applying two coat of OBD over a coat of alkali resistant primer over one coat of putty complet all as specified and as directed.

M&L for applying Two or more coats on old surface of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over 1mm thick wall putty (for external suface) complete all as specified and directed.

M&L one coat synthetic enamel paint on old wooden surface incl prepartion of old surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed

M&L preparation of New steel surfaces over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L, preparing for old steel surfaces and applying one coats of synthetic enamel paint over 10 cm width or girth complete all as specified and as directed.

Taking down chowkhats or frames of any description n exc 1.5 sqm each (without taking off shutters from the frame)

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but n exc 4 Sqm each etc complete all as specified and as directed

S&F powder coated aluminium frame straight for doors/windows/partitions using aluminium section of minimum size 100mmx44mmx2.00mm thick, 31mmx12mmx3.00mm thick & 49.91x44.45x1.3 mm thick and etc. fixed in position by means of steel screws and patent rawl plugs / bolts / hold fasts of suitable size complete all as specified and directed

M&L for powder coated anodised aluminium door shutter fabricated out of aluminium section 1.60mm thick two side openable with top rail and stiles of size 83x44mm, lock and bottom rail of size 100x44mm, (two panels) with and including 12mm thick plain colour PVC sheet (Rajshree make) and 5mm thick ordinary sheet glass duly covered with tinted solar control film, including jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws, door stoper, anodised aluminium fittings such as hinges (B-21) handles (disc type), tower bolts (200mm long), locking device with duplicate keys complete all as specified and directed.

S&F in repair aluminium die cast body door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 Kg complete all as specified and directed.

S&F in repair of door seal 20 to 25 mm wide 0.9 to 1.0 m length with GI Powder coated flap fixed to doors shutter with screws, complete all as specified and directed.

M&L for powder coated aluminium glazed window shutters (One No glazed & One gauzed) side hung type, including fabricated out frame work of required size and frame having weight not less then 0.667kg/Rm without sash bars made of shutter sections weighing 0.55 kg/m including providing necessary powder coated aluminium fittings like joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type C-21 100mm long (2 no.) aluminium handle (1 no.) per shutter etc etc complete and as directed. Note : The minimum thickness of powder coating shall be 50 Micron. (ii) Cost of all fittings & Fixture shall deemed to be included in unit quoted rate by the tenderer.

S&F powder coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge.

M&L for providing and fixing stainless steel (Grade 316) hollow letters (Hindi /English) made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, fixing on wall / Borad with suitable arrangement.etc complete all as specified and as directed by Engineer-in-Charge.

M&L framed work as grills, gratings, etc with ends of bars shouldered and/ or riveted into spikes; or forged into spikes, framed guard bars; barred iron doors and similar work confirming to Fe 290. Gd-E-165 and complete all as specified and directed

M&L Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30mm thick prelam (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per manufacturer’s instructions complete all as specified and directed.

S&F Butt hinges 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21complete all as specified and directed.

S&F in repair of extruded Aluminum anodised handles 150 mm long, fabricated type, complete all as specified and directed.

S&F in repair of Aluminium anodised barrel tower bolts 150 mm long of extruded section, complete all as specified and directed.

S&F continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm complete all as specified and as directed.

S&F 18/19 mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws to timber frame work etc complete all as specified and directed

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 4.8 mm thick, sheet glass, ordinary quality and glazing withoil putty in square in exc 0.5 sq.m in each pane etc complete all as specified and as directed.

S&F in repairs Vitreous chine wash down water closet pan with P or S trap (padestal pattern), white (EWC) including plastic seat of same colour of WC, closed pattern with flat bottom, and cover mild steel chromium plated hinging device complete all as specified and directed

S&F in repair vitreous china squatting pan orissa pattern of size 580x440mm white with integral foot rest and including connection to trap and to flushing pipe, anti syphonage pipe etc. complete including making good to floor.

S&F in repair 10 ltrs capacity PVC low level flushing cistern sleek plus single flush of colour star white with inlet, float valve and handle with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed.

S&F in repair Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand and waste pipe complete all as specified and directed

S&F PVC connections 15mm size with PTMT nuts of length 600mm etc complete all as specified and as directed.

S&F 15mm bore cast copper alloy chromium plated angle cock with flange complete all as specified and as directed.

S&F 15mm bore cast copper alloy chromium plated two way angle cock with flange complete all as specified and as directed.

S&F 15mm bore fancy type chromium plated bib cock body with flange etc complete all as specified and as directed.

S&F in repair of CP Pillar cock, 15 mm dia with flange made of cast copper alloy fancy type, complete all as specified and directed.

S&F in repair of CP health faucet with 15 mm dia, 1.5 mtr long flexible tube & wall hook, made of cast copper alloy, complete all as specified and directed.

S&F in repair PVC floor 125/110mm trap/Nahani trap PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed

S&F CP Towel ring and complete all as specified and directed

S&F 600mm CP towel rail "D" type fixed to wall with CP brass screws complete all as specified and as directed.

S&F 25 mm dia chromium plated curtain rod with CP brackets and knobs at both end as per sample approved by Engineer-in-charge.

Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid dry or laid dry & pointed complete all as specified and directed.

M&L for Glossy finish 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.complete all as specified and as directed.

M & L RCC drain pipes of 450mm bore, class NP3, with collars laid and jointed, laid in tenches and jointed in CM 1:1 including dismentaling of old pipe complete all as specified and as directed.

M & L RCC drain pipes of 300mm bore, class NP3, with collars laid and jointed, laid in tenches and jointed in CM 1:1 including dismentaling of old pipe complete all as specified and as directed.

M&L Stone slab 25mm to 35 mm thick dressed true and square, in one length not less than 60cm and n. exc 120 cm in copings, window cills, chajjas, sunshades, etc., complete all as specified and as directed.

M&L RCC type B0 (1:2:4) using 12.50 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for TMT bars 6 mm to 8 mm dia, cut to length, bent to shape reqd, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed

M&L TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and as directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter Rough finished surfaces of concrete flat complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with clamp out of 25x3mm flate Iron including bolts and nuts 110mm bore complete all as specified and directed

S &F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

S&F PVC (SWR) pipes single socketed, in any length with clamp out of 25x3mm flate Iron including bolts and nuts rubber ring joints, fixed to wall 75 mm bore complete all as specified and directed

S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed

S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door complete all as specified and directed.

S&F SS chromium plated peg set of five fixing with wall complete all as specified and directed

Demolition and breaking drain pipe (salt glazed stoneware) set in cement mortar including packing under and haunching against side of pipe for 150 mm Internal dia of pipe complete all as specified and directed

Concrete bed to drain pipes 150mm including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 complete all as specified and directed

M&L Salt glazed stone ware (SGSW) grade 'A' pipe 150mm bore laid and jointed on concrete bed complete including testing complete all as specified and directed.

Excavation in trenches for fdn n.exc 1.5m wide and n.exc 1.5m in depth & getting out in soft /loose soil complete all as specified and directed.

Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm complete all as specified and directed

Removing excavated materials to a distance n.exc 50m and n exc 1.5m above the starting point complete all as specified and directed

Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed.

Excavationn in post holes each n.exc 0.50 cum and getting out any type of soil for foundation of each vertical posts complete all as specified

Excavation in trenches n . exc 1.5 m wide and n. exc 1.5 m in depth; for foundation etc. or for shaft, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n exc 1.5 m in depth and getting out any type of soil deep and getting out in any type of soil complete all as specified

M&L, 100 mm thick soling or sub base with broken boulders or quarried stone, inter stices filled, surface formed and rollled and consolidated to required camber and gradient complete all as specified and directed

M&L for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in floor / hard standing etc complete all as specified and directed.

M&L for RCC (1:2:4) type B1 using 20 mm graded aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass complete all as specified and directed.

M&L rendering 10 mm thick in cement plaster 1:6 on surfaces on fair faces of brick work and surface even ande smooth without using extra cement complete all as specified and directed.

M&L rendering 10 mm thick in cement plaster 1:4 on surfaces on fair faces of brick work and surface even ande smooth without using extra cement complete all as specified and directed.

S&F steel work (tubular pipes,square/round as in vertical posts, rafters/purlins framed using ERW or induction butt welded including tubes conforming to I. S.1161-1979 grade St.-240 for supporting tubular/square pipe rafters/purlins special shaped washer etc complete all as specified.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer on new surface complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coat of oil bound distemper over a coat of primer on new surface complete all as specified and directed.

Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.

Taking down unserviceable Sheet metal box & MCB DB TPN with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge.

M & L for Modular concealed point wiring for One light point controlled by one switch including cutting chasing filling of surface for fixing of conduit and making good distrubed surface one light controlled by one modular switch with PVC insulated and unsheathed flame retardant Low Smoke(FRLS-H) cable of 1.5 sqmm including taking down of old U/S point wiring (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 20 mm dia, clip, with modular MS terminal boxes (not less than 1.6 mm thick) including earth dolly and 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed for the following. Note : Modular matching cover frame pates of defferent sizes are shall be measured separately.

Ditto all as per item No 115 but for One Ceiling fan point controlled by one switch.

Ditto all as per item No 115 but for one Exhaust fan point controlled by one switch.

Ditto all as per item No 115 but for one 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch.

Ditto all as per item No 116 but for one 3 pin/5 pin switch socket outlet, 5 Amps on independent board.

Description all as per item No 115 here in before but point wiring with 2.5 sqmm FRLSH confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire.

S&F Modular switch 1 way 6A,1 module complete all as specified and directed.

S&F Socket, 6A - 2/3 pin combined 2 module,complete all as specified and directed.

S&F Modular switch 1 way 16A,1 module 15 Amp complete all as specified and directed.

S&F Socket 6A/16A - 6 pin combined 2 module complete all as specified and directed.

S&F ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

S&F Fan step regulator, 120W - 2 module 240 volts, AC 50Hz complete all as specified and directed.

S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete.

S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed.

S & F sheet metal box Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amp complete all as specified .

Supply and fixing in repair 20 W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 28watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge.

Supply and fix LED 35W street light fitting,5700 K energy saving & environmental friendly long life versatile pressure die cast aluminium IP 66.road way luminare with high power LEDs as light source and electronic driver suitable for pole dia 35 mm including 35 mm dia light grade tube bracket ,bend to shape 1.80 mtr length with two nos of clamps of size 50mm x 6mm with nuts and bolts,washers etcincluding connection with 1.5sqmm threesingle core PVC insulated and PVC sheathed cable stranded copper cable upto ceiling rose and fixing on walls/pole complete all as specified and directed.

M&L, concealed sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

S&F TPN DB-DPX 125 MCCB DBs 4 way double door with provision for DPX 125 MCCB and as incomer CONCEALED ON WALL and SP/TP MCBs as out going no of modules DPX 100, Complete all as specified and as directed.

Supply and fix MCCB having breaking capacity of of 16 KA 415V, 4 pole having rating capacity of 63 Amp 100% ICU complete all as specified and as directed.

S&F MCB DB, sheet metal enclosures double door SPN 8 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed..

S&F, MCB SPN 40-63 Amps, 240 volts 'C' series 10 KA ,including connection with suitable size copper lugs complete all as specified and directed..

S&F, MCB SP 240 volts, 6 to 32 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

S&F for modular White cover plate with frame of 2/3/4 module including fixing , modular switchs , modular socket ,modulare regulator complete all as specified and directed by engr-in-charge.

S&F for modular White cover plate with frame of 6/8/12 module including fixing , modular switchs , modular socket ,modulare regulator complete all as specified and directed by engr-in-charge. .

Supply and laying XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 16 X 4 sqm complete all as specified and directed by engr-in-charge. .

S&F in in replacement of 35/36 W of size 2 Feet X 2 Feet LED 6500K rescessed mounting luminaire glare free suitable for armstrong/ grid ceiling in MS/CRCA housing with high brightness LEDs incl wiring upto and terminating into existing ceiling rose complete all as specified and directed by engr-in-charge.

S&F Modular power socket with single pole MCB 20 Amp 'C' SERIES complete all as specified and as directed

Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Exhaust fans AC single phase 230/240V of size 300 mm sweep, 1400 RPM with louvre complete including with all arrangement of making holes on wall, making good and finishing of disturbed surfaces matching with the existing surfaces, necessary fixing arrangement such as fastener bolts, nuts, washers etc, of appropriate size all as specified and as directed

M&L galvanised iron pipe of size 40 mm dia, light grade ISI marked, complete with fittings laid in trenches/ fixed with poles etc as protection to cables complete as ditrected by Engineer in Charge

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.

M/s Pratham Enterprises (BID ID -3315362)

VEER SINGH CONSTRUCTION (BID ID -3314739)

M/S Chadha Brothers (BID ID -3314746)

N K ENTERPRISES (BID ID -3322230)

M/S M S Constructions (BID ID -3315241)

M/S Ritu Tandon (BID ID -3316312)

m/s gupta trading (BID ID -3322072)