WARD NO 03 BADUA GODAM ME NASEER PUR ROAD PAR LAKSHI RAM KE MAKAN SE CHAUHAN BASTI TAK PITCH ROAD NIRMAN KA KARYA

Site Clerance including labour and matrials and including grass cutting /Dressing and carrage of matrials by Head load

E/W filling in embankment with cartage soil up to 8.00 km distances etc com.

Construction of Granular sub base (GSB) by providing coarse graded material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per Clause 401 ..

Providing, laying, WBM Grade-2 with 45- 63mm size Stone Ballast spreading and compacting stone aggregates of specific Sizes to Water bound macadam specification including spreading in uniform thickness, hand packing, rolling with theree wheeled static roller 8-10 tonnes in stages to proper grade and

Providing, laying, WBM Grade-3 with 22.4-53mm size Stone Ballast spreading and compacting stone aggregates of specific Sizes to Water bound macadam specification including spreading in uniform thicknes's, hand packing, rolling with theree wheeled static roller 8-10 tonnes in stages to proper grade and camber, applying and brooming

Brick edging both side of road with all comp.

Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including celaning of road surface and spraying primer at the rate of 0.70Kg/Sqm using mechinical means . As per Technical specification Clause 502( Including all Taxes required & including cost of bitumen emulsion.)

Providing and applying Tack coat with bitumen (VG-10) using pressure distributor at the rate of 0.35 Kg/Sqm on prepared surface of bituminous/ surface treated with primer & Cleaned with hydraulic broom as per Technical specification Clause 503(Including all Taxes required & including cost of bitumen VG-10.)

Providing laying and rolling of open - graded primix surfacing of 20 mm thickness composed of 13.2 mm to 5.60 mm aggregates either using penetration grade and level to serve as wearing course on a previously prepared base , including mixing in a suitable plant laying and rolling with a smooth wheeled roller 8-10 tonne capacity finished to required level and grades alL com.

Providing &Applying Seal coat over 2 cm thick P.C. with bitumen with type B matrial including cost of material shifting labour T& P etc all com.