Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.2 LAccepted-AOC A 303 SHREE KRISHNA COMPLEX CO OP HSG SOC LTD WESTERN EXPRESS HIGHWAY OPP NATIONAL PARK BORIVALI E MUMBAI 400066 | MUMBAI SUBURBAN | MAHARASHTRA | 400066 | L1 | Accepted-AOC L1 | |
| 2 | L2₹29.0 L+₹77,229.86 (2.74%)Rejected-Finance 46 HUSENI LAKDA BAZAAR 242 BELLASIS ROAD MUMBAI 400008 | MUMBAI | MAHARASHTRA | 400008 | L2 | Rejected-Finance Not Reasonable | |
| 3 | L3₹29.0 L+₹79,478.36 (2.82%)Rejected-Finance | L3 | Rejected-Finance Not Reasonable | |
| 4 | L4₹29.6 L+₹1.4 L (4.87%)Rejected-Finance 5 6 MINTO ROAD ALLAHABAD 211001 | PRAYAGRAJ | UTTAR PRADESH | 211001 | L4 | Rejected-Finance Not Reasonable | |
| 5 | L5₹31.9 L+₹3.7 L (13.3%)Rejected-Finance NOT AVAILABLE | L5 | Rejected-Finance Not Reasonable |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
21 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Saurabh Gupta, EE
GE(W) Colaba, Mumbai
ADDITION/ALTERATION TO BUILDING NO P-30 UNDER GE (W) COLABA, MUMBAI
2023_MES_598168_1
8760/E8
Open Tender
Civil Works
Item Rate
180 days
GE(W) Colaba
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE(W) Colaba, Mumbai
₹86,000
Yes
21 Aug 2023
25 May 2023
23 Jun 2023
25 May 2023
21 Jun 2023
7 Jun 2023
Amount
Dismantling mangalore patteren or similar tiles in roofing including portions bedded in cement mortar all as specified and directed.
Dismantling roof battens of any description in any position all as specified and directed.
Dismantling boarding, any description, fixed in any position with nail all as specified & directed
Taking down chowkhats or frames area exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) all as specified and directed.
Dismantling of wall and ceiling boards (fibre pulp insulation etc) any thickness including cover fillets all as specifed and directed.
Taking down chowkhats and shutters of windows/ventilators with wire mesh / glass and MS grills of any size including all fittings and fixtures complete all as specified and directed.
Dismantling timber in scantling 40 Sqcm and over in section in any position unframed work all as specified and directed.
Demolition of brick masonary built in cement mortar all as specified and directed.
Demolition of cement concrete (unreinforced below or above ground level) n.exc 15cm thick and removing rubbish to a distance n.exc 50m at low lying area all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.
Demolition of cement concrete reinforced ( reinforcement cut as required to faciliate demolition) roofs, floors (other than ground floors), beams, staircases, landing, chajjas, facia, fins railing, parapet etc and similar suspended work all as specified and directed.
Taking down cement plaster of any description on brick or stone walls etc including raking out joints hacking for key, scrubbing down with water and removing debris outside MD land including necessary scafolding of any hieght of bldg all as specifed and direcetd.
Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface all as specified and directed
M&L PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in embedding of post all as specified and directed.
M&L RCC works as in columns, foundations, beams, slabs, parapet, stair case etc. in M-20 grade nominal Mix (1:1.5:3) (using 20 mm graded crushed stone aggregate) including demolition all as specified and as directed.
Use & waste special water tight centering and shuttering including bolting, strutting, propping etc. so as to withstand a pressure of 0.1 Mpa including removal of form from all locations including beams, columns, slabs, walls, foundations, footings, landings, stairs, balconies all as specified and as directed.
M&L mild steel bars deformed or twisted 10mm dia and over, cut to length, bent to shape, required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
All as per item No 17 above but 6 mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as specified and directed.
M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 all as specified and directed.
M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 including demolation all as specified & directed
M&L broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface using power roller all a specified and directe.
M&L PCC 1:4:8 type D2 (using 100mm graded stone aggregate) and similar work all as specified and directed.
M&L earth filling in floors etc. spreading and leveling in layers, well ramming including watering as required all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in floors, plinth protection (finished surfaces even and fair) laid in panels including joints filled with sealing compound grade 'A' all as directed by Engr-in-Charge
M&L coloured polished matt finish 8-10 mm thick area of each tile exeeding 0.18 sqm but not exe 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles laid over and including screed bed or bedding layer of mortar 15mm thick in CM (1:6) all as specified and directed. Make Johnson /Kajaria)
M&L coloured, poster tiles in vertical surface 600x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in CM 1:4 all as specified and directe. Note:- (Rate of Designer border in vertical surface will be deemed into quoted rates) Make : M/s H R Johnson/M/s Kajaria/M/s Somany Tiles Ltd
M&L in repair coloured glass mosaic tiles having computer graphic design og size 25mm x 25 mm x 5mm jointed and pointed with white cement mixed with admixture to match with the colour of tiles including Acid cleaning as in vertical surface all as specified and directed. Note: (a) . The tiles shall pested as per the computer graphic design/CAD given by Garrison Engineer fixed in different location. (b) . Rate inclusive of necessary scaffolding upto required height above or below ground level.
M&L Granite (of any type and colour) 20 mm thick machine cut , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid in floors/Jambs/WHB conters and all other similar works in approved design over 20 mm thick screed bed in cement mortar 1:4 all as specified and directed.
M&L hard drawn steel welded wire fabric mesh,100 x 100 x 3mm dia cut to lengths bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia, supplied anchored over 3 to 4 inch long iron nails at a distance of 0.6 m in both direction and fixed in walls / reinforcemnt weight not less than 1.37 Kg/Sqm but not exc 4kg per sqm for fixing and for bracing, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it all as specified and directed.. Note:- (a) The rates include for straightening, raking or circular cutting and waste. (b) Rates also include for straightening where reinforcement is supplied in rolls/coil.
S&F SS 304 Grade metal letters of height 200mm with PU paint to match the logo colours, mirror polish finish, anti rust and including necesssary arrangements to fixing in walls, using scaffolding at any height all as specified and directed.
S& 4mm thick panel of any type, pattern and shape Aluminium Composite Panel (ACP), aluminium thickness of 0.5mm, Front side finish of aluminum roll coated with Plain / coloured / wooden texture PE / PVDF, Core material of Non-toxic polyethylene, Macromolecular lamination film, Rear side of Aluminum coated with primer and including frame work using of Fasteners, including concealed screws, nuts, bolts and other items required for connecting aluminium to aluminium / steel / wooden / ply board, Blind rivets all fixing anchors, brackets and similar attachments used in the erections, shall be of aluminium, non-magnetic stainless steel, zinc coated steel, for fixing in both internal / external wall cladding complete weather proofing sealant of a polyurethane elastic joint / structural silicone sealant / pre-formed gaskets to the Horizontal & Vertical Joints in the Aluminium cladding / facade as per manufacturer's instructions complete all as specified and directed. Note : (a). The unit rate quoted is deemed to be inclusive of all necessary fixing acceserries mentioned in the description of work and scaffolding works at any height for installation. (b). For payment purpose panels areas will be measured on one side only.
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangemet for Stainless Steel grade 304 decorative designer railings, staircase, covers, sitting place, shed etc. (design and pattern as approved) made out of all as specified and directed. Make : Jindal stainless Ltd., SAIL, TISCO, POSCO etc.
M&L for 12 mm thick ready mix plaster in single layer on brick wall or concrete surfaces including making groove of appropriate size, on other than fair faces of concrete/brick surfaces (internal surface) and finished surfaces even & smooth without using extra cement all as specified and directed.
M&L for 20-25 mm average thick ready mix plaster in multi layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, mixed with liquid water proofing compound on other than fair faces of brick work all as specified and directed.
Supply only integral waterproofing compound all as specified and directed.
M&L for two coats of smooth interior acrylic emulsion with Texture finish having VOC less than 50 grams per ltr complying LEEDS criteria @1 ltrs (unndiluted) /10 sq mtrs diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint as per manufacturer instructions all as specified and directed. Make -Apcolite Premium Emulsion
M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified & directed. Note (a.) The work pertaining to periodical services shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Apex, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b) Contractor may use mechanized sanding tools for complete removal and Surface preparation by Air spray machine Trucare -graco-ultramax-490-pc -pro approved by Engr -In-Charge.
M&L for preparation of newly plastered wall surfaces and applying a coat of wall care putty (Birla White Wall care or equivalent) 2mm thick (in two coat 1 mm each) average on plastered surfaces rubbing with sand paper, preparatory to distempering and applying two coats of acryilic emulsuion over a coat of alkali resistant priming paint all as specified and directed. Make : Apcolite Premium Emulsion Note (a.) The work pertaining to periodical services shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Apex, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b) Contractor may use mechanized sanding tools for complete removal and Surface preparation by Air spray machine Trucare -graco-ultramax-490-pc -pro approved by Engr -In-Charge.
M&L for providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making, provision for fixing of fittings where ever required including the cost of EPDM rubber/ neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws complete all as per architectural drawings and the directions of Engineer-in-Charge. Note : (i) Glass panes will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips, hionges,handle. However it will be not be weighed and not paid separately. Rate quoted inclusive of sealing the gap between wall and window with silicon sealent. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.
S&F aluminium deco grill Cat No DG-916, 7.5 mm thick, cut to required size/shape and fixed in position with aluminium beading all as specified and directed.
S&F sheet glass, ordinary quality, 5.5 mm thick, plain or frosted on one side and glazed with oil putty or fixed with rubber beading in square exceeding 0.5 Sqm in each pane or as required all as specified and directed.
S&F of stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm of approved design and fixed with aluminium windows all as specified and directed.
S&F in repair 12mm thick, toughened glass for door shutters, partitions in bathroom or other places, shelves, table top etc and in similar work with and including fitting and fixtures such as glass handles SS studs, fittings for door pivots all as specified and directed.
S&F sun control film, 50 micron non reflective type, sticked to glass as per manufacturers instructionsall as specified and directed.
S&F in repair SS 202 stain finish handle D type, 25mm dia 600mm long for glass shutter all as specified and directed
S&F in repair bottom/top patch fitting for pivot all as specified and directed
S&F in repair bottom lock patch fitting all as specified and directed
M&L in repair 10 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface with GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre with & including Hangers 4mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long all as specified and directed.
Extra over above items no. 48 for any sunk or raised moulding all as specified and directed.
S&F GI powder coated frame work for seamless ceiling 600x600mm grid size comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre all as specified and directed.
S&F 8 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous materials reinforced with cellulose fibre for fixing in 605 X 605 mm grids all as specified and directed. Note:- Frame work for ceiling shall be measured and paid separately.
S&F 40 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, both faces covered with decorative face Laminate both side with incl 5mm thick teakwood lipping all around / frame to match on both side with supply & fixing stainless steel 7.5 inch Mortice 7 lever door lock, double action with handle all as specified & directed.
S&F 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge, etc. sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) and fitted to chowkhats all as specified and directed.
S&F in repair 25 mm dia stainless steel decorative type curtain rods to be fitted with stainless steel bracket and all other connected works complete all as specified and directed by Engineer-in-charge.
S&F curtain rod stainless steel side brackets of approved quality all as specifed and directed.
S&F 35mm thick flush shutter, solid core construction with block board core and one side lamnaited and one side with different colours matt finish of wooden colour solid panel decorative type on both side all as specified and directed.
Providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate of 0.50 litre per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same all as specified and directed.
Material and labour for injecting chemical GLYPHOSATE 41 percent soluion 20 ml or till refusal by making cut/injection in the stem of plant 30mm center to center and spraying with solution (25 ml Glyphospate 41 percent diluted with one litre of water ) and removing the plants/vegetation with penetrated roots including all necessary scafolding arrangments upto any height all as specified and directed. Note:- The quoted rate deemed to include for inspection and surveying all the buildings in area regularly for preventing any additional growth of vegetation/ palnts with above treatment to the entire satisfaction of Engineer-in-Charge.
Providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment along external wall below concrete or masonary apron using chemical emulsion at the rate of 2.25 literes per linear metre including drilling and plugging holes etc in apron all as specified and directed.
Providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment for treatment of soil under existing floors using emulsion at the rate of one litre per hole, 300mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1cement : 2 coarse sand) to match the existing floor all as specified and directed.
S&F factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 120mm X 50 mm size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold unserviceable fast/lugs/SS dash fasteners of required dia and length all as specified and as directed.
M&L for preparation of new wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.
S&F 100 mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 all as specified and directed.
Supply and fix 200mm size brass handle cast type polished bright all as specified and directed.
S&F 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed
S&F aluminium anodised Barrel tower bolts of extruded section, length of bolt 300mm all as specified and directed.
S&F door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring of size 150 mm, fixed all as specified & directed .
S&F for mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality- A including welding, nuts and bolts all as specified and directed.
S&F steel work in tubular trusses including special shaped washer using ERW or induction butt welded tubes, nuts and bolts, welding, etc conforming to I. S.1161- 1979 grade St.-240 all as specified and directed.
S&F rolled mild steel in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality A all as specified & directed .
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. Make -JSW
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, eaves etc fixed with self tapping screws as all as specified and directed.
M&L two coat of synthetic enamel paint over a coat of red oxide on steel surface including preparation of steel surface width or girth exc 10cm all as specified and directed.
S&F aluminium (Die cast) body, door closer, hydraulically regulated, designation No. 3, unversal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg all as specifed & directed.
M&L framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 all as specified and directed.
S&F mild steel work using flat iron as in stays for rainwater, ventilating pipes, rain water half round brackets including bolts if required and similar small articles conforming to Fe410-0 or Fe 310-0 all as specified and directed.
S&F rain water gutter in half round shape 110mm dia PVC ( SWR) grade pipes single socketed in any length with integral outlet of 110 mm dia all as specified and directed.
S&F PVC (SWR) , 110mm bore, Double socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, any location,any floor including necessary scaffolding all as specified and directed.
S&F 110mm dia PVC (SWR) bends /elbow any radius including GI clamps of approved shape and size approved by GE at any height, any location, any floor including necessary scaffolding all as specified and as directed.
Providing and erecting and susequently dismantling temperory GI sheet /plywood portions with 2.00 metre high fixed so as to isolate the living area from working area and taking away all material all as specified and directed.
Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling all as specified and directed.
M&L for point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, casing capping with accessories and incuding provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139 (pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches, socket outlets, fan regulators, etc. with brass screws and brass washers and making good the disturbed surfaces to match with the existing existing surfaces for one light fan point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . Make- Havells/Polycab/KEI
All as per item No.83 here in before but for socket outlet point 5 Amp on same board.
All as per item No. 83 here in before but for socket outlet point 5 Amp on Independent board.
All as per item No 2 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point)
S&F modular switch 1 way 6 A module 230/250 volt, AC supply, ISI Marked, with white cover plate with frame all as specified and directed. Make : Legrand/ indoasian/Vinay
S&F modular switch 1 way 16 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame all as specified and directed. Make : Legrand/ indoasian/Vinay
S&F modular sockets 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI marked, with cover plate all as specified and directed. Make : Legrand/ indoasian/Vinay
S&F modular sockets 6A/16A, 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI marked, with white cover plate with frame all as specified and directed. Make : Legrand/ indoasian/Vinay
S&F modular sockets 16A/20 Amps 2/3 pin combined 2 module 230/250 Volts, 50 Hz, air conddtioner AC supply, ISI Marked, with white cover plate with frame all as specified and directed. Make : Legrand/ indoasian/Vinay
S&F modular fan step/electronic regulator, 120W - 2 module A module 230/250 volt , AC supply, ISI marked, with cover plate all as specified and directed. Make : Legrand/ indoasian/Vinay
S&F ceiling rose surface bakelite 65x50mm, 3 terminal all as specified and directed. Make : Cona , Plaza, Anchor .
S&F in repairs LED batten fitting 20 watt, 3000K/ 4500K, long life up to 25000 hrs with one year warranty, 3.5 KV surge protection, White / Warm White type, 4 feet long fixed on pvc square box for mounting the fittings and electrically conncected with suitable size of pvc insulated multistranded copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) all as specified and directed Make:Havells Model No :20W Bajaj IVORA 20W CDL of Bajaj / havells / Wipro.
S&F in repairs LED 36 Watt 3000 K, Slim raccess mounted LED panel 2x2 with premium diffuser to ensure glare free & even light distribution, with integrated electronic driver of same make connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specified and directed. Make - BAJAJ/Havells / Wipro/ Jaguar
S&F in repairs 20 watt smart extruded aluminium LED batten high efficiency inbuilt sensorin 4 feet long fixed on pvc square for mounting the fittings and electrically conncected with suitable size of pvc insulated multistranded copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) all as specified and directed Make: Bajaj No- BCLAB 20W LED PS /Havells / SHAKTI/ Wipro.
S&F in repairs LED 18 Watt 3000 K/6500K, Slim raccess mounted LED panel with premium diffuser to ensure glare free & even light distribution in LIFT Corridor area, with integrated electronic driver of same make connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specified and directed. Make - Havells (Cat part No - BPSLR 18 W WW PRO SQ of BAJAJ/Havells / Wipro/ Jaguar
S&F in repairs exhaust fan 230 volts, 250mm, plastic body including making all electric connection all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall all as specified and directed. Make Bajaj/Havell's/CG.
S&F ceiling fan complete with blades, down rods, electronic regulator and ccessories, 230 V, 1200 mm sweep Min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC making all electric connection, huck and suitable size rod at site requirement for hanging ceiling fan all as specified and as directed Make Bajaj/Havell's/CG.
Taking down and refixing of ceiling fan (old fan) and connecting up including provision of cable from ceiling rose or connector and fan painting of ceiling fans with synthetic enamel paint by spraying including winding hanging rod making serviable type, filling cavities with filler, one coat after cleaning all dust etc. with taking down fan, sealing cable end,dismantling romoving and refixing fan and blades, huck and suitable size rod at site requirement for hanging ceiling fan all as specified and directed.
S&F in repair LED building security light fitting 45 Watt, luminaire fixture in IP 66 protection level output of LED lamp efficiency minium 100 luman per watt after all losses, pressure die-cast aluminium housing LED Street light complete with GI clamp including connected accessories and bracket made of GI pipe 50mm dia light grade 1.25 m long, bend to shape with two sets of MS flat iron clamps, nuts, bolts, washers all as directed by Engineer-in-Charge. Make Philips : cat pat No BRP409 LED060HENRPC S1PSU GR or equivalent in Wipro cat part No LR02-501-XXX-57-XX / Havells cat part No ENDURACITYLINERNEXGENSL45WLED757 SASYBOPC. Note : The rate quoted must be inclusive of 3 core 1.5sqmm cable for connecting the light to supply.
S&F in repairs MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 4 ways, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.
S&F in repairs MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel enclosure, powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.
S&F in repairs MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series all as specified and directed including taking down old one all as specified and directed.
S&F in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's including taking down old one all as specified and directed.
M&L in repairs sub main wiring with two run of single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed in wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes, etc. as required fixed on wall along with one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/distribution board and testing on completion including taking down old wiring all as specified and directed. Note: (i) Two runs of 06 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine. (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.
M&L for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers, galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing on completion all as shown in Electrical Plate No 3 of SSR part -I.
Unitech Enterprises
SAHI SAGAR ENTERPRISES
Frends Enterprises
SHREE JAGDISH FURNITURE CO.
RAJU AND COMPANY
Bidder Name
Unitech Enterprises
Frends Enterprises
Nilesh Construction
SHREE JAGDISH FURNITURE CO.
SAHI SAGAR ENTERPRISES
RAJU AND COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .