ADDN / ALTN TO HEALTH CLUB AT GH, GH BLDG NO 50 AND SPECIAL REPAIRS TO HARDSTANDING AND SEWAGE LINE TO BLOCK NOS 23/ 1 TO 3, 25/ 1 TO 3, 26, 27/1 TO 3, 28 AND 28A AT DSSC WELLINGTON.

Amount

B/R PORTION Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in hard /dense soil complete all as specified and as directed.

Excavating in trenches, n.exc 1.5m wide and n exc 1.5 in depth; and getting out in hard/dense soil , for foundation, laying of cables, errecting of poles complete all as specified and as directed.

Excavating over areas, n.exc 1.5 m deep and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick with excavated soil all as specified and as directed.

Removal of excavated materials (soil) to a distance n.exc 250m and depositing where directed at a level n.exc 1.50 m above the starting point all as specified and as directed.

M & L for plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete all as specified and as directed.

M & L for Precast cement concrete (1:3:6), type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in CM (1:6) complete all as specified and as directed.

M & L for rendering 15 mm thick in CM (1:4) mixed with WPC as per manufacturer's instruction on fair face of brick/concrete surfaces and finished even and smooth without using extra cement all as specified and as directed. Note : WPC shall be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M & L for Walling of random rubble uncousred well bonded bedded and solidly hearted built in CM (1:6) including necessary bond stones and pointing the unaccessible dressed surface with same mortar as the work proceeds complete all as specified and as directed.

Extra labour over stone walling for Granite or trap stone for Hammer dressing to faces stones and dressing of face of beds and joints as specified of random rubble walling un coursed or brought up to course with maximum depression on face straight edge held against the dressing surface not exc 40mm all as specified and directed by Engr-in-Charge.

M & L for Keyed pointing to random rubble or polygonal uncoursed or brought to course in CM (1:4) all as specified and as directed.

S & F PVC (SWR) pipes, type 'B', single socketed 110 mm bore in any length fixed to walls or laid in trenches or in floors complete all as specified and as directed.

M & L for hand packing with broken stone or boulders or loose filling with aggregate of gauge 40 to 80 mm at back of walls, over arches /back side abutment at weep holes areas etc and raising or lowering to the required level all as specified and directed by Eng-in Charge.

M & L for hard core of broken stone or boulders exc 63mm and n.exc 100 mm size deposited, spread and levelled in layers n.exc 15cm thick,watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge

M & L for 75mm thick, PCC (1:3:6), type C-1, (using 20mm graded stone aggregate) as in floors and pavings etc, etc. finished even & fair without using extra cement complete as specified and as directed.

M & L for 40mm thick cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate), as in sub bases, floors and pavings etc, finsihed even and smooth with using extra cement all as specified and as directed.

M & L for chequered cement concrete tiles of size 300 x 300 x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments of required colour, laid over and including 20mm thick screed bed in CM (1:6) all as specified and as directed.

S & F Vitreous China wash down water closet of Make :Parryware (Cascade Classic), Cat No: C0217 (Coupled Closet) & C0711 (Cistern) or equivalent makes, colour white, closed pattern with flat bottom and soft close seat cover and mild steel chromium plated or aluminised hinging device and P/S trap including connections to drain (or outgoing pipe) and including cistern complete all as specified and as directed. .

S & F in repairs Vitreous China coloured WHB of Make:Jaquar, Cat No : CNS-WHT-705 or equivalent makes, oval shaped counter top of min size 595 x 420 x 200 mm including waste coupling, PVC waste pipe etc. complete all as specified and as directed. Note : Granite slab for mounting WHB shall be measured separately.

S & F in repairs central hole basin mixer of Make: Jaquar, Cat No : CQT-23167B or equivalent makes, without popup waste system with 450mm long braided hose pipe complete all as specified and as directed.

S & F in repairs Bib cock (Two in one) of Make : Jaquar, Cat No : CQT-23041 (Bib cock) & Cat No : ALD-573 (Health Faucet) or equivalent makes with health faucet multi type including flexible hose complete all as specified and as directed.

S & F in repairs toilet paper holder of Make : Jaquar, Cat No : ACN-1151N or equivalent makes, brass CP rod to insert paper roll mounted and screwed to walls complete all as specified and as directed.

S & F in repairs towel rack of Make : Jaquar, Cat No : ACN-1181N or equivalent makes, SS foldable with 60 cm long with 04 Nos lower hanger hooks complete all as specified and as directed.

S & F corner glass shelf of Make : Jaquar, Cat No : ACN-1173 or equivalent makes, made out of glass with CP guard rail and wall fixing accessories of size 300 mm radius complete all as specified and as directed.

S & F in repairs 15 mm dia bore angle cock of Make : Jaquar, Cat No : CQT-23083K or equivalent makes, chromium plated cast copper alloy fancy decorative type with flange plate including taking down complete all as specified and as directed.

S & F in repairs, two piece type stainless steel gratings square or round 100 mm size complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required & pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; & cutting chases for concealed water tubing or concealed conduit wiring, etc.& making good, cutting not exc 10 cm grith in brick wall all as specified and as directed.

Taking down steel tubing and connections upto 25 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

S & F 15 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.

S & F 20 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.

S & F 25 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.

S & F rotational moulded polyethylene double layered water storage tanks (cylindrical vertical with closed top and screwed lid type) FDA grade material of capacity 1000 litres hoisted and fixed in position all as specified in SSR Part I including dismantling connection from existing RCC Over Head Tank all as specified and as directed.

S & F 25mm bore, ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete as specified and as directed.

S & F 25mm bore, Gun-metal or globe gate valves, with iron wheel head, screwed both ends for iron pipe complete as specified and as directed.

Taking down eaves gutters & rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the center line over fittings & accessories) as specified and as directed.

S & F PVC (SWR) bends any radius 110 mm bore provided with access door all as specified and as directed.

S & F PVC (SWR)110mm bore branch piece single (single Y) equal or unequal all as specified and as directed.

S & F PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed.

S & F 200 mm bore PVC (SWR) pipes, type 'B', single socketed, laid and jointed in trenches or in floors completed all as specified and as directed.

M & L for PCC (1:3:6), type C-2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 200 mm bore complete all as specified and as directed.

M & L for PVC (SWR) gully trap 125/110 mm, set and jointed with solvent cement complete all as specified and as directed.

M & L for half brick thick brick wall with sub-class bricks, straight or curved on the plan n.exc 6m mean radius built in CM (1:4) all as specified and as directed.

M & L for use and waste of timber as in formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) for fair finished surfaces of concrete flat all as specified and as directed.

M & L for providing precast cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) set in CM (1:6) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves, cooking platform and similar articles with plain faces complete all as specified and as directed. Note : Reinforcement shall be measured and paid separately.

M & L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hopping for columns,hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.

All as per Item No 48 above but 8 to 10 mm dia as in stirrups, spacers and binders complete all as specified and as directed.

M & L for plain cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in benching to manholes etc., surface channels and drains etc complete all as specified and as directed.

M & L for cement concrete (1:2:4) type B-1 (using 20 mm graded aggregate), for septic tank flooring, finished even and smooth without using extra cement all as specified and as directed.

M & L for laying 3mm thick APP modified water proofing membrane weighing not less than 3.6 Kg/Sqm, reinforced with non woven polyster matt black finished weighing not less than 100 gm/Sqm having softening point not less than 140 degree celsius, longitudinal tensile strength not less than 300 N/Sqm, side lap & end lap 15cm over a coat of bitumen primer @ 0.20 Kg/Sqm and finished with aluminum paint @ 0.10 Ltr/Sqm all as per manufacturer's instruction and as directed by Engr-in charge. Note : The work shall be carried out by authorised applicators of manufactures.

M & L for rendering 20 mm thick in CM (1:3) mixed with WPC as per manufacturer's instruction, over neat cement slurry @ 3.00 Kgs / Sqm, on fair surfaces of concrete, finished even and fair without using extra cement to receive roof treatment complete all as specified and as directed Note: WPC shall be measured and paid seperately.

M & L for RCC M25 (design mix) (using 20mm graded stone aggregate) as in foundation, including rafts, footing, foundation, beams, plinth beams, base for columns etc., complete all as specified and as directed.

M & L for RCC M25 (design mix) (using 20mm graded stone aggregate) as in columns, piers, pillars, posts and struts etc., complete all as specified and as directed.

M & L for RCC M25 (design mix) (using 20mm graded stone aggregate) as in beams, cantilevers , bressummers, lintel over 1.5m span etc., complete all as specified and as directed.

M & L for RCC M25 (design mix) (using 20mm graded stone aggregate) as in Chajjas etc., complete all as specified and as directed.

M & L for RCC M25 (design mix) (using 20mm graded stone aggregate) as in slab supported on walls, beams, columns in floors, roofs, landing etc., complete all as specified and as directed.

M & L for use and waste of timber as in form work to sides of concrete foundations, footing bases for columns raft,and raft beam,sides and soffits of foundation and plinth beam, similar work, vertical or to batter, rough batter for rought finished surfaces of concrete flat, all as specified and as directed.

M & L for use and waste of timber as in form work to chullah hoods, chajjas, troughs and similar items including edges for fair finished surfaces of concrete flat, all as specified and as directed.

S & F stainless steel hand rail grade 304 tubular section of wall thickness 16 gauge including necessary welding at joints, grinding & mirror polishing, all stainless steel accessories complete all as specified and as directed by Engr-in-Charge.

M & L for use and waste of timber as in form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., for fair finished surfaces of concrete flat, all as specified and as directed

M & L for 10 mm thick rendering in CM (1:6) on stone masonry or other than fair faces of brick work surfaces of wall, finished even and smooth without using extra cement complete all as specified and as directed.

M & L for preparation of new surfaces of walls and applying with white putty and making the surface to an even & smooth finish, rubbing with sand paper of different grade etc., and applying two coats of tractor emulsion or Oil bound emulsion distermper over a coat of primer to be applied by approved applicator of the manufacturer of the paint and all as specified as per manufacturer's instruction and as directed by Engr-in-Charge.

M & L for complete removal of existing treatment on surfaces of wall & applying with white putty and making the surface to an even & smooth finish, rubbing with sand paper of different grade etc., and applying two coats of tractor emulsion or Oil bound emulsion distermper over a coat of primer to be applied by approved applicator of the manufacturer of the paint and all as specified as per manufacturer's instruction and as directed by Engr-in-Charge.

M & L for Moorum / red bajri filling in floors or paving, laid in layers n exc. 15 cm thick, spread, leveled & rammed including watering all as specified and as directed.

M & L for cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate),75 mm thick as in sub base of flooring finished even and rough to receive the top layer complete all as specified and as directed.

M&L for 500 x 500 x 20mm thick inter locking rubber tile flooring laid and pasted with suitable glue pigment to match the shade of the surface complete all as specified as per manufacturer's instruction and as directed by Engr-in-Charge.

M & L for coloured light shade vitrified tiles of size 600 x 600 x 8 to 10 mm size, as in flooring set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 20mm thick screed bed in CM (1:6) all as specified and as directed.

M & L for Nonskid coloured ceramic tiles 7mm to 8mm thick, area of each tiles exc 0.11 Sqm but n.exc 0.18 Sqm in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 20mm thick screed bed in CM (1:6) all as specified and as directed.

M & L for glazed ceramic coloured tiles of size 450 x 300 x 7mm thick on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colouring tile, laid over and including 10mm thick backing coat/ rendering in CM (1:3) all as specified and as directed.

M & L for granite slab 18-20mm thick, machine cut, (Black in colour, table rubbed and polished) in cooking platform, microwave platform & WHB counter top; set in cement mortar(1:4) 15mm thick including pointing in white cement (1:2) using marble dust, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, rounding, moulding and polishing with edges to be bullnosed, including taking down old one, laid over and including bedding layer of mortar 15mm thick in CM (1:4) all as specified and as directed.

M & L for gypsum board multi level false ceiling 12mm thick of any shape and design fixed with standard GI frame work with GI furring channels of 16 gauge, main "U" shaped channels @ 1220mm c/c and inter connected cross channels "C" shape spaced at 610mm c/c,the main furring channels shall be fixed through GI channel suspenders from therof @1200 c/c, main and inter connected channels shall be fixed through fasteners clips as per manufacturer's instructions, with and including plaster of paris decorative type cornices all around at the junction of wall and ceiling etc., all as specified in Drg No TD-637 and soffits of false ceiling boards shall be applied with two coats of plastic emulsion paint over a coat of primer all as specified and directed by Engr-in-Charge.

M & L for providing UPVC door with shutters complete all as per manufacturer's direction and following specifications all as directed:- 1. The construction profile for UPVC door will be of overall frame sectional size 60 x 58 mm with wall thickness 2.70 +/- 0.2 mm extruded sections. 2. The corners shall be plastic welded. The hinge side vertical outer frame shall be reinforced with galvanised steel profile of wall thickness 1.2 mm +/- 0.2 mm. 3. The door shall be fixed to walls using 8 mm dia 80 mm long MS screws minimum 3 Nos on each side.

4. The glazing shall be fixed to door frame with UPVC standard beadings of sectional size 24.05 x 16 mm & 2 mm thick. 5. The bottom portion of door shutter shall be provided with UPVC board 5 mm thick & 1 mtr in height and the balance shall be glazed excluding the shutter frame area. The shutter shall be fixed to frame using 3 nos of 3D hinges. 6. The Door shutter shall be provided with 12 mm thick sheet glass & 5 mm UPVC board with EPDM rubber gasket, one motice lock with powder coated handles and two numbers powder coated MS tower bolts complete all as specified & as directed. 7. All the fittings shall be provided with using self tapping screws. Note: The entire fixing will be done as per manufacturer's instructions and specification and as directed by Engr- in-Charge.

M & L for coloured UPVC sliding window complete all as per manufactures direction and following specifications all as directed: 1. UPVC window frame shall be made of materisl confirming to IS 10151 the window frame shall be made of extruded UPVC section having over all dimension of 60x60mm having wall thickness 2.5mm+ 0.2mm and sash width x height :38mm x60mm 2.Corners of frame shall be reinforced with galvanized steel profile of wall thickness 1.20mm 3. The profiles should be three chamber system which shall provide high insulation properties. 4. Glazing shall be 5mm thick reflective bronzeTG & fixed in frames with appropriate beading as per manufactures specification. 5. Suitable locking arrangement shall be provided with each window shutter. Note: The entire fixing will be done as per manufactures instructions and specification and as directed by Engr-in-Charge.

M & L for coloured UPVC fixed ventilator complete all as per manufacturer's direction and following specifications all as directed: - 1. UPVC ventilator frame shall be made of material confirming to IS 10151, the window frame shall be made of extruded UPVC section having over all dimension of 60 x 60mm having wall thickness 2.5mm+ 0.2mm. 2. Corners of frame shall be reinforced with galvanized steel profile of wall thickness 1.20mm 3. The profiles should be three chamber system which shall provide high insulation properties. 4. Glazing shall be 5mm thick frosted glass& fixed in frames with appropriate beading as per manufactures specification. Note: The entire fixing will be done as per manufactures instructions and specification and as directed by Engr-in-Charge.

Dismantiling of floor hearth, wall tiling or terrazzo flooring including cement mortar bedding and removing debris off the premises complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing debris off the premises complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles and removing debris off the premises complete all as specified and as directed.

Demolition of brick tiles or terracing tiles, single layer on roofs laid, bedded and pointed in cement mortor and removing debris off the premises all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frames) n.exc. 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frames) exc. 1.5 Sqm & n. exc. 4.00 Sqm each complete all as specified and as directed.

M & L for preparation of newly plastered surfaces on external walls and applying one coat of exterior wall putty for smoothness, one coat of exterior wall primer and two coats of exterior emulsion anti-algal weather proof paint complete all as per manufacturer's instruction and as directed by Engr-in-Charge.

M & L for complete removal of existing treatment on external walls by wire brushing, crack filling & Bio-wash to fight microbial growth and applying one coat of exterior wall putty for smoothness, one coat of exterior wall primer and two coats of exterior emulsion anti-algae weather proof paint complete all as per manufacturer's instruction and as directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced ) of any description and in any postion not otherwise spcifically provided etc (below or above ground level) and removing debris off the premises complete all as specified and as directed.

Dismantiling posts (or) struts (wood, RCC (or) steel any section , including taking out embedded portion and making good disturbed ground, concrete/ brick/ RR work masnory etc.., complete all as specified and as directed.

Dismantling fencing wire mesh of any type complete all as specified and as directed.

S & F mild steel works such as joist, channel, angle or tee sections, posts, rafters, purlins, trusses, connecting plates, etc. fixed independently conforming to Fe-410-W(Gde E-250) quality-A complete all as specified and as directed.

Supply only Chain link MS galvanised fencing, any size (or) type of 3mm to 4mm dia wire complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straning bolts, etc., including provision of binding wire complete all as specified and as directed.

S & F for MS flat iron fillets in posts and struts in fencing ,drilling holes (for securing wire mesh etc),including necessary drilling ,bolting or riveting etc confirming to Fe 410-0or Fe 310-0 complete all as specified and as directed.

S & F mild steel screw bolts of 11 to 15 mm diameter of shank (machine made ) with hexagonal or square heads at one end and screwed the other ,each screwed end to to be fitted with washers and one hexagonal or square nut , exc 5 cm and n.exc 10 cm long complete all as specified and as directed.

M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (any shade) over a coat of red oxide zinc chrome primer all as specified and directed.

Removing excavated material (soil) to a distance exc 500m and upto 1.5 km and deposing where directed at a level 1.5m above the starting point all as specified and as directed.

Demolition and breaking up 200mm dia SGSW pipes set in cement mortar and taking out of trenches complete all as specified and as directed.

Extra labour for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, stopped ends etc., complete all as specified and as directed.

E/M PORTION Taking down carefully existing unserviceable aluminium batten /surface conduit /concealed conduit point wiring (light /exhaust fan/socket/call bell/ power point) complete including (fittings and fixtures such as switches, ceiling roses, shades, brackets, sockets, holders, light fittings, call bells, fluorescent tube light fittings) andremoving the unserviceable retrieved materials from site making good the disturbed surfaces of walls/floors/ceilings etc. complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable PVC insulated/sheathed sub main wiring with 2 single core aluminium conductor cable of size upto 10 Sqmm on wooden batten /PVC conduits complete with battens /conduits and shall be removed from site and making good the disturbed surfaces of wall complete all as specified and directed by Engr-in-Charge.

Disconnecting /dismantling of old existing unserviceable DB's any way 240 /415 Volts with their old/unserviceable burnt MCBs complete all as specified and directed by Engr-in-Charge.

M & L for concealed point wiring with 1.5 Sq mm, FRLS PVC insulated, single core, copper conductor cable, 1100 Volt grade, multi stranded in and including rigid non metallic medium grade PVC conduit concealed in wall for one light /5A socket /exhaust fan controlled by one switch with and including continuous 1.5 Sqmm PVC insulated single core copper conductor cable earth continuity conductor connected to common earth and earth dolly, in the modular flush boxes etc. complete all as specified and directed by Engr-in-Charge. Make of Cable:Havells/Finolex/Polycab Note : (i) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate. (iii) The cost of cutting chases is deemed to be included in the unit quoted rate. (iv) Modular flush boxes measured separately.

All as per Item No 100 above but with copper conductor cable of size 2.5 Sqmm and one run of 2.5 Sqmm for earth continuity conductor complete all as specified and as directed. Note : (i) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate. (iii) The cost of cutting chases is deemed to be included in the unit quoted rate.

M & L for sub main concealed wiring with four single core, multi stranded, FRLS, PVC insulated, 1100 Volt grade, ISI marked, cable with multi stranded copper conductor of size 6 Sq mm and including drawing through PVC rigid conduit medium grade including continuous PVC insulated copper conductor two run of single core earth continuity conductor of size 6 Sqmm connected common earth complete all as specified and directed by Engr-in-Charge. Make:Havells/Finolex/Polycab. Note:(i) 6 runs of 6 Sqmm cable and one run of medium grade PVC rigid conduit shall be measured as one unit length. (ii) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth. (iii) Cost of cutting chases and making good the disturbed surfaces is deemed to be included in the unit quoted rate.

S & F modular type socket outlet 6 Amps, 5 pin shuttered socket, 2 module complete all as specified and as directed. Make : Verona of Crabtree, Cat No : ACVKSWW065 or techno-commercially equivalent in Legrand/Anchor ROMA

S & F modular type socket outlet 2 in 1, 6/16 Amps all as specified and as directed. Make : Verona of Crabtree, Cat No: ACVKCWW163 or techno-commercially equivalent in Legrand/Anchor ROMA

S & F modular type switch single pole 16 Amps one way all as specified and as directed. Make : Verona of Crabtree, Cat No: ACVSXXW161 or techno-commercially equivalent in Legrand/Anchor ROMA

S & F modular type switch single pole 6 Amps one way all as specified and as directed. Make : Verona of Crabtree, Cat No: ACVSXXW101 or techno-commercially equivalent in Legrand/Anchor ROMA

S & F concealing modular metal flush box suitable for fixing switches/sockets of following modules all as directed. (a) 1/2 Module Make : Verona of Crabtree, Cat No : ACTXMIIX01 or equivalent in Legrand/Anchor ROMA

(b) 3 Module Make : Verona of Crabtree, Cat No : ACTXMIIX03 or equivalent in Legrand/Anchor ROMA

(c) 4 Module Make : Verona of Crabtree, Cat No : ACTXMIIX04 or equivalent in Legrand/Anchor ROMA

S & F modular cover plate suitable for fixing switches/sockets of following modules all as directed. (a)1/2 Module Make : Verona of Crabtree, Cat No : ACVPPCWV01 or equivalent in Legrand/Anchor ROMA

(b) 3 Module Make : Verona of Crabtree, Cat No : ACVPPCWV03 or equivalent in Legrand/Anchor ROMA

(c) 4 Module Make : Verona of Crabtree, Cat No : ACVPPCWV04 or equivalent in Legrand/Anchor ROMA Note for Item Nos 107 to 108.20:- Make of Modular metal flush box & Cover plate shall be of same make as that of switches & sockets.

S & F of ceiling rose surface mount PVC /Polycarbonate, isolated body with face bakelite three terminal complete all as specified and directed. Make: Anchor/Havells/CG.

S & F IP >= 65, IK>=07, Class I energy saving and environment friendly long life high power LED as source of building security light of 40W made up of pressure die cast aluminum housing with acrylic cover as diffuser with including GI pipe bracket made out of 40mm dia light grade pipe of length 1.2 Mtrs, bend to shape 120-130 degree and MS clamps made out of 25 x 3mm flat iron 2 Nos including nut and bolts for fixing the bracket and making connections in flexible conduit all as specified and as directed. Make : Havells, Cat No: ENDURAPEARLNEO SL40WLED757PASYTOPC Endura pearl of Havells or techno-commercially equivalent in Philips/Luker. Note:(i)The cost of making good and matching to the existing surface is deemed to be included in the unit quoted rates. (ii) The cost of fixing clamps and GI pipe is deemed to be included in the unit quoted rates.

S & F wall mount mirror light of 18W, 3000 K made of aluminium die cast body with IP 20 protection for symmetrical light distribution complete all as specified and directed. Make: Luker, Cat No : LMCL18 or techno-commercially equivalent in Jaquar/Philips.

S & F recess mounted aesthetically designed 2 x 2 LED flat panel for 42 Watts surface mounting with high power LED as source which provides soft-light and glare free symmetrical distribution all as specified and directed. Make : Havells, Cat No: PLUTONEO2X2PLR 42WLED857S or techno-commercially equivalent In Luker/Philips.

S & F recess mounted aesthetically designed 1 x 1 LED flat panel for 15 Watts surface mounting with high power LED as source which provides soft-light and glare free symmetrical distribution all as specified and directed. Make : Havells, Cat No: PLUTO1X1PLR15W LED857S or techno-commercially equivalent In Luker/Philips.

S & F, IP 65, Class I, energy saving, environment friendly, long life aesthetically designed with diffused lighting, spun aluminium 8 W or next higher rating lanscape luminaire (Garden Light Fitting) of size 1000 mm with high Power LEDs as light source with CT >= 5700 K integrated type, operating range – 140 to 270 V, 50 Hz with necessary fixing arrangements including coping etc. complete with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size inside flexible conduit from junction box to fitting all as specified and as directed. Make: Havells, Cat No:BAMBOOBL8WLED 857SSYMTOPCM or techno-commercially equiv in Luker/Philips Note for Item Nos 110 to 114: The cost of making good and matching to the existing surface is also deemed to be included in the unit quoted rates.

Supply, install, testing & commissioning of Exhaust fan, PVC body with automatic back shutter louvers 250 mm sweep, 1280 RPM or more, Air Delivery not less than 860 CMH, single phase, 240 Volts, AC, 50 Hz and connecting up complete including louvers and provision of cable 3 core of size 0.75 Sqmm from ceiling rose to fan in flexible hose including taking down of old fan and making of suitable sized hole in the wall for fixing of the exhaust fan & making good the disturbed surfaces (if any) including electric connection with twin/three core cable inside flexible conduit from ceiling rose upto the fan complete all as specified & as directed. Make : Havells, Cat No: Ventil Air - DX White or techno-commercially equivalent in Usha/Crompton Note :- The cost of making hole in walls/other surfaces & making good the disturbed surfaces including any framework or wood work required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included inthe unit quoted rate.

S & F MCB DB, TPN, 6 ways double door type, IP-43, IK-09 with metal door, rated bus bars, earth bar, neutral links complete including blanking plates as required & fixed flush to wall/other surface complete all as specified and as directed. Make : L&T, Cat No : DBTPE006DD or techno-commercially equivalent in ABB/Legrand. Note :- The cost of flushing in walls/other surfaces, making good the disturbed surfaces & matching to the existing surface is deemed to be included in the unit quoted rate.

S & F TPN MCB enclosure, 4 ways Cutout type, IP-43, IK-07 with sheet steel with din rail to mount TPN MCB complete including blanking plates as required & fixed flush to wall/other surface complete all as specified and as directed. Make : L&T, Cat No : DBENC004SD or techno-commercially equivalent in ABB/ Legrand. Note :- The cost of flushing in walls/other surfaces, making good the disturbed surfaces & matching to the existing surface is deemed to be included in the unit quoted rate.

S & F miniature circuit breakers, TPN, C-Curve 240 Volts of capacity 6-32 Amps as ordered breaking capacity 10 KA all as specified and directed. Make :L&T, Cat No : AU10ST0323C or techno-commercially equivalent in ABB/Legrand.

S & F miniature circuit breakers, single pole, C-Series 240 Volts of capacity (6-32 Amps) as ordered breaking capacity 10 KA all as specified and as directed. Make : L & T, Cat No:AU10S10XX3C or techno-commercially equivalent in ABB/Legrand.

S & F loop in- loop out fuse junction box of internal dimension 140(H) x 140(W) x 95(D) mm made out of FRP sheet with weather proof canopy and locking screw fitted with and incl 10 Amps rated 4 Way connectors for 3 phase and neutral incoming/out going, mounted in the box, fixing on steel tubular /rail poles /wall including necessary aluminium clamps, suitable cable glands, lugs and GI nut and bolts complete all as specified and directed by Engr-in-Charge. Make: Sintex, Model No:- GSJB-1414 or techno-commercially equivalent in Hensel/Rittal

Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings/ equipments etc. UG cable, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 4 Core 6 Sqmm complete all as specified and directed by the Engr-in-Charge. Make: Havells/Finolex/Polycab

Supply and laying light grade GI Pipe (ISI Marked) of 40 mm dia for cable protection to be fixed with all fitting complete to walls /ceilings /trenches complete all as specified and as directed. Make : Jindal/Tata/Prakash Note:- Rate quoted shall include MS clamps of required size wherever the pipe is to be fixed on walls/poles etc.

M & L for cutting the existing hard standing /PCC /WBM road at a depth not less than 45 cm and 25 cm in width for passing of cable through GI pipe, returning filling in, complete including finishing the surfaces by providing top 30 cm thick cement concrete type B-1 (1:2:4) using 20 mm grade aggregate, bottom filled with excavated earth and remain finishing to a uniform smooth surface complete all as specified and directed.

M & L for earthing complete with galvanised steel plate electrode 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25mtrs deep below ground level) with top edge of plate not less than 1.5mtrs below normal ground level, connected to GI earth strip of size 32 x 6mm by means of bolts,nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point on completion with and including 40 mm bore medium grade GI protection pipe (upto 7.5mtr long) & watering pipe of 20mm bore medium grade GI pipe for earth including PCC chamber pit with cover, watering arrangement with funnel, common salt, charcoal filling, including necessary excavation, earth work & taking down old earthing items in any type of soil complete all as specified and as directed. Note: If the desired earth resistance is not obtained, the earthing is to be redone at no additional cost, to the entire satisfaction of Engr-in-Charge.

Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings/ equipments etc. UG cable, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 4 Core 25 Sqmm , all as specified and directed. Make: Havells/Finolex/Polycab

Removing excavated material (soil) to a distance n.exc 50 m and depositing where directed at a level not exc 1.5m above the starting point all as specified and as directed.

Supply and laying sub class 'B' bricks of size 230 x 115 x 75 mm laid across the cable for cable protection, above sand complete all as specified and directed.

M & L for providing sand cushioning for protection of UG cable (8 cm deep before laying & 15 cm above the top edge of cable after laying) in trenches with dry coarse sand (M Sand) approved quality including filling, spreading and punning down to desired thickness complete all as specified & as directed. Note: Punned thickness of 18 cm only shall be considered for payment purpose.

SREERAM

ACE PROMOTERS

Krishna Engineering