Fabrication, transportation, installation, commissioning, and trial run of one 1000mm width, 1x90kW, 550V, single drive head in the 65L belt conveyor at 20XD 65L for strengthening the belt conveyor in the RVII seam of the LHCM2 section at 3 and 4 Inc

Amount

PART A:Fabrication, transportation, installation, commissioning, and trial run of one 1000mm width, 1x90kW, 550V, single drive belt conveyor at 65L/20 XD in RVII seam

Fabrication of base frame of drive head at site(20DXD/65L)

Fabrication of Loop Take Up unit at site(20DXD/65L)

Transportation of the 1000mm width, 1200kW, 550V Drive Head complete including gear box, motor(90kW/550V), couplings, bearing blocks, fencing for entire surface and installation at 65L/20DX (R-VII) with necessary fabrication work

Dismantling and removal of material of old 800mm drive head from site 20DX/65L

Transportation and Installation of Loop Take-up Unit Complete, with fencing from surface and install at 65L/ In between 20XD-21XD

Transportation of discharge drum to site(19XD/65L) from surface through hauling and about 30 mtrs. Manually

Changing of the damaged drum by replacing it with the transported drum(800mm dia, length-1150mm) after making necessary fabrication at site

Heightening of structures for alignment of belt after changing of discharge drum with necessary clearing and fabrication

Transportation, Laying, Lapping, Jointing & Tensioning of about 7mtr. Belting on loop take-up and trial run.

Transportation of starter, cable to site(21XD/65L) from surface through hauling and about 30 mtrs. manually and laying the cable

Transporting, Laying, Lapping, Jointing & Tensioning of about 12 mtr. Belt on loop take-up and trial run.

Transporting the replaced 800mm drive head, motor and discharge drum to surface

Supply of DA cylinder

Supply of Oxygen cylinder

Supply Of M.S. welding electrode (4 mm x 450 mm)

Supply Of M.S. Hex. Nut & Bolt (M16 x 50)

Supply Of M30 x 180 H.T. Hex. nut and bolt

Supply Of M30 x 140 H.T. Hex. nut and bolt

Supply Of M24 x 120 H.T. Hex. nut and bolt

Supply Of M16 x 65 H.T. Hex. nut and bolt

Supply Of M24 x 150 H.T. Hex. nut and bolt

Supply Of M20 x 65 H.T. Hex. Bolts with Nuts

Supply Of M16 x 50 H.T. Hex. Bolts with Nuts

PART B:Civil foundation works for installation of 1X90KW,550 V 1000mm wide belt conveyor head, discharge unit, loop take-up unit and platform for ACB, Starter for proposed 65L belt conveyor of 3&4 incline, JPC.

Recess cutting in stone

Muck & debris cleaning & disposal up to 15.0 M

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20 mm nominal size)

Loading of materials into Tub,lowering & unloading at site(Tubs)

PART D:Roof heightening by drilling blasting in stone, cleaning, roof bolting including cost of drill rod, drill bit for installation of proposed 65L belt conveyor in R-VII seam of 3&4 incline under JPC

Roof heightening by drilling blasting in stone including dressing & Cleaning with cost of drill rod and drill bit

Roof bolting including carrying of materials from surface to u/g side, drilling, grouting & cost of drill rod and drill bit.

Total impact of GST for the purpose of CTC

SABIR CONSTRUCTION

NANDI ENTERPRISE