Loading
Loading…
Loading…
Tender Value
₹14.8 Cr
EMD Value
₹24.8 L
Closing Date
10 Jun 2026, 3:00 pm5d left
DGM BSBCCL SAHARSA
DEPUTY GENERAL MANAGER SAHARSA
BSBCCL, Hospital Road, Sastri Nagar, Patna 800023
ANIL KUMAR
CGM
CONSTRUCTION OF BABA KARU KHIRHAR MUSEUM AT SAHARSHA - BIHAR...
132049
04/BSBCCL/2026-27 GR02
Open Tender
CIVIL
Saharsa
• Payment Receipt (EMD/Tender Fees/Tender Processing Fee)
• Total value of civil engineering construction work, in Rupees, Performed in last five years. (BALANCE SHEET, PROFIT & LOSS AND AUDIT REPORT DULY AUDITED BY CA.) Minimum annual financial turnover (in all classes of civil engineering construction works only) amount of construction work ,which must be at least equal to 50 % of estimated cost of works for which bid has been invited. The turn over will be indexed at the rate of 8% for a year
2021-22
2022-23
2023-24
2024-25
2025-26
• Amout in Rupees related to Work Experience of Similar nature -i) Satisfactory completed at least one similar work of value not less than 50% of estimated Cost (Escalation As per appendix ITB sl no-19) ii) The completion Certificate shall be issued by employer not below the rank of executive engineer or project manager. In case of Private client the completion crtificate and valuation of the project issued by employer should be certified by the retired executive engineer/Registered valuer of Nationlised Bank/Insurance Company/Income Tax Department.
• QTY /AMOUNT AS INDICATED IN ANY ONE YEAR IN LAST FIVE YEAR (QUANTITY EXECUTED MUST BE SATISFIED BY CONCERN ENGINEER INCHARGE. In case of Private client the quantity executed will be issued by employer should be certifed by the retired executive engineer/Registered valuer of Nationalised Bank/Insurance Company/Income Tax Department.
Earth work in excavation 1,701.09 CUM
Brick work/AAC BLOCK 461.22 CUM
PCC/RCC 2,698.52 CUM
FLOORING 2,039.31 SQM
PHE WORK 25.16 Rs in Lac
ELECTRICAL WORK 81.24 Rs in Lac
• AS PER SEC 2-1.5 MAX. AGE 5 YEARS ATTACHED OWNED VOUCHER /CASH MEMO/INVOICE AND AFFIDAVIT IN CASE OF LEASED/HIRE ON AND AFTER DATE OF TENDER
Type of Equipment Nos. Maxm. Age
Steel Shuttering 3000 Sft 5
Concrete Mixer with Integral weigh Batching facility 2 5
Vibrator (Plate & Niddle) 4 5
Water Tanker 1 5
• AS PER SEC 2-1.6 ATTACHED NECESSARY CERTIFICATE AND CURRENT AFFIDAVIT OF BOTH EMPLOYEE AND EMPLOYER ON AND AFTER DATE OF TENDER
1.Site Engineer / B.E. (Civil) + 03 Years Exp. (3 years in Building Construction) or Diploma in Civil + 7 year Exp. In Building construction or retired A.E. 1 no.
2.Site Supervisor /Fresh Graduate in Civil or Diploma Civil + 02 Years Exp. or retired I.T.I Holder 2 no.
• Litigation History if Any.
• Evidence of accesses to Financial Resources in Rupees-Evidence of access to or availability of creadit facilities (10% of estimated cost), certified by bankers (for work under this bid).
• Undertaking -Able to invest a minimum of cost upto 25% of contract value of work. During implementation of contract.
• Registration No.-any Contractor Registered with Central Government/Any State Government/Any Public Sector Undertakings or an agency of National or Internatiional repute may tender, but Registration with Building Construction Department will be essential after issue of Letter of Acceptance
• Experience Certificate of identifiied Sub Contractor (Electrical/PHE/Furnituer) will be valid. Experience Certificate should be issued by at least Executive Engineer and equivalent officer.It is Mandatory to Attched Mutual Affidavit & Registration Certificate of Sub Contractor
• Legal Status/Place Of Registration/Principal Place Of Business./Power of Attorny.
• (a) Amount of Existing commitments and ongoing works in Rupees (Bidder must declare themselve their all existing commitment hiding fact be sufficient cause for rejection.)
• (b) Amount of Work for which Bid already submitted, in Rupees
• ( c ) BIDDING CAPACITY ( BC=AxNx3-B) SHOULD BE MORE THAN BOQ.
• CHARACTER CERTIFICATE of Bidder IF SUB CONTACTORS AFFIDAVIT CHARACTER CERTIFICATE MUST BE ATTACHED.
• NOC for Debar.
• GST Registration Certificate,PAN & Aadhar Document.
• Proposed Methodology of Construction.
CIVIL
PERCENTAGE
L1
1
22 documents required · 22 mandatory
₹10,000
Processing Fee: 5900
₹24.8 L
CGM BSBCCL PATNA
25 May 2026
25 May 2026
11 Jun 2026
25 May 2026
10 Jun 2026
25 May 2026
27 May 2026
NAME OF PROJECT:- CONSTRUCTION OF BABA KARU KHIRHAR MUSEUM AT SAHARSHA - BIHAR.
Cost OF B.O.Q 147571183.00
Earnest Money 2475711.83 Round off=2475800.00
Bid Document Cost Rs. 10,000.00
Time of Completion 12 MONTH
BILL OF QUANTITY
Sl. No. Ref Items of Works Quantity Unit Rate Amount
A SCHEDULED ITEMS
1 2022 BSR 2.8.1 Earthwork in excavation in foundation trenches or drains(not exceeding 1.5m in width or 10 sqm on plan)including dressing of sides and ramming of bottom lift upto 1.5m,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m All kinds of soil. 3326.41 Cum. 360.70 1199836.00
2 2.26 Filling available excavated earth(including rock)in trenches ,plinth,sides of foundation etc.in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead. 1369.68 Cum. 123.90 169703.00
3 2.28 Supplying and Filling in plinthy with local sand and under floors including watering ,ramming consolidating and dressing complete. 1723.94 Cum. 287.30 495288.00
S.H. II: MASONRY WORK
4 6.1A Brick work with bricks of class designation 100A in foundation and plinth in:
6.1.12/1 cement mortar 1:4 (1 cement : 4 coarse sand) 29.62 cum 5017.90 148630.00
5 6.47 Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). 877.38 cum 5350.00 4693983.00
5a 6.21A Extra for providing and placing in position 2 Nos, 6mm dia, MS bars at every third course of half brick masonry (with F.P.S. brick) 690.00 sqm 113.60 78384.00
6 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering work upto plitn level: 1:2:4(1Cement :2 Coarse sand:4 graded tone aggregate 20mm nominal size) 184.78 cum 3998.10 738769.00
6A 4.17 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3coarse sand : 6 graded stone aggregate20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. 164.00 sqm 436.60 71602.00
7 5.33 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
5.33.1 All works up to plinth level
5.33.1.2 Concrete of M-30 grade with minimum cement content of 350 kg/cum 1041.86 cum 5189.10 5406316.00
8 5.33.2 All works above Plinth level up to floor five level.
5.33.2.2 Concrete of M-30 grade with minimum cement content of 350 kg/ cum 1146.87 cum 5989.00 6868604.00
9 5.9 Centering and shuttering including strutting,propping etc and removal of form for:
A 5.9.1 Foundation,footing,Bases of column etc for mass concrete. 295.23 sqm 211.60 62471.00
B 5.9.3 Suspended floors,Roofs, landings, balconies and access platform. 2622.48 sqm 437.50 1147335.00
C 5.9.5 Lintels,Beams,Plinth beams,girders,bressumers and cantilevers. 4175.67 sqm 404.70 1689894.00
D 5.9.6 Columns,Pillars,Piers,Abutments,Posts and struts. 2763.80 sqm 494.40 1366423.00
F 5.9.2 Walls including attached pilasters 130.23 sqm 375.10 48849.00
10 5.22 Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding complete.
A 5.22.7A Thermo-Mechanically Treated barsTMTC-500-8mm dia 47847.07 Kg. 94.50 4521548.00
B 5.22.7B Thermo-Mechanically Treated barsTMTC-500-10mm dia 69815.35 Kg. 92.60 6464901.00
C 5.22.7C Thermo-Mechanically Treated barsTMTC-500-12mm dia 46390.08 Kg. 90.80 4212219.00
D 5.22.7D Thermo-Mechanically Treated barsTMT FE-500-16 to 25 mm dia 221638.02 Kg. 91.70 20324206.00
11 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.) 1452.60 kg 546.80 794282.00
12 10.33 Providing and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer
10.33.3 G.I. Pipes 40mm nominal bore (class B) 1484.88 kg 150.00 222732.00
13 9.48 Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. all comlete.
9.48.1 Fixed to steel windows by welding. 14630.59 kg 144.50 2114120.00
14 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140mm internal diameter 73mm height,5mm thick rim bottom and top lids 1.5mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3mm dia round headed screws,one at the corners :Clamps shall be made of 12mm dia M.S bar bent to shape as per standard drawing. 50.00 Each 165.40 8270.00
15 9.1 Providing wood work in frames of doors, windows, clerestroy windows and other frames, wrought framed and fixed in position:
9.1.1 Second class teak wood 1.71 cum 120526.60 206100.00
16 9.136 Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG GI sheet ( Zinc coating not less than 120gm/m²) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes Fire Rated Door Shutters. The frame is fitted with intumuscent fire seal trip of size 10x4 mm minimum alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per directions of Engineer - in- charge . (Dash fastener to be paid for separately). 109.20 Mtr. 1462.70 159727.00
17 9.137 Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 min Fire Rating confirming to IS:3614 (Part II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles,lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I. sheet (zinc coating not less than 120gm/m²) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately). 56.70 Sqm 6445.00 365432.00
18 9.138 Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators & partitions etc., with G.I. beading of appropriate size,made out of 20 SWG G.I. sheet (zinc coating not less than120 gm/m²)fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc, complete in all respect as per direction of Engineer-incharge.(Actual glass size is to be measured at site for payments).
9.138.1 With clear fire resistant glass panes 6 mm thick of approved brand, having minimum 60 minutes fire resistance 56.70 Sqm 31796.30 1802850.00
19 9.139 Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. 8.00 Each 7,061.50 56492.00
20 9.20 Providing and fixing ISI marked flush door shutters confirming to IS: 2202(Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
9.20.1 35 mm thick including Stainless Steel butt hinges with necessary screws. 83.16 sqm 2845.60 236640.00
21 9.24 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded)
9.24.1 Rectangular or square 5.00 sqm 173.90 870.00
22 9.53 Providing 40 x 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bots, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) 176.00 Each 130.80 23021.00
23 9.74 Providing and fixing bright finished brass tower bolt (barrel type) with necessary screws etc. complete.
24 9.103 Providing and fixing bright finished brass 100mm mortice latch and lockwith 6 lever handles with necessary screws etc. complete (best make of approved quality) 4.00 Each 655.40 2622.00
25 9.81 Providing and fixing bright finished brass handle with necessary screws etc. complete.
26 9.82 Providing and fixing bright finished brass hangging type floor door stoper with necessary screws etc. complete. 29.00 Each 108.10 3135.00
27 9.88 Providing and fixing chromium plated brass 100 mm latch and lock with 6 levers and a pair of handles of approved quality with necessary screws etc. complete 25.00 Each 733.10 18328.00
28 9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564,embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete 25.00 Each 810.10 20253.00
29 9.147D Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multichambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of as required. length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of as required. size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable
9.147D.5 Three track three panels sliding window made of (big series)frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) 238.86 Sqm 8624.00 2059929.00
30 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. (Cost of aluminium snap bading shall be paid in basic item.)
21.3.2 With glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm) 244.26 Sqm 1115.10 272374.00
31 26A.1 Providing and supplying aluminium extruded tubular and other aluminium sections as per the rchitectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS74,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). 6040.80 kg 370.40 2237512.00
32 26A.2 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels,including:a
a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc.structural and weather silicone sealants, flashings, fire stop,(barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:
b) Fabricating and supplying serrated M.S. hot dip galvanised /Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel frame work of building structure using stainless steel anchor fasteners/ bolts,nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.
c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture,as per the approved sealant design, within and all around the perimeter for holding glass.
d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.
Note :- 1 The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places.
Note :- 2 The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by BL(National Accreditation Board for Testing and Calibration boratories), Department of Science &Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories
1 Performance Laboratory Test for Air Leakage Test (-50pa to –300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr”
2 Static Water Penetration Test. (50pa to 1500pa) as per ASTME-331-09 testing method for a range up to 2000 ml.”
3 Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01-05 testing method for a range upto 2000 ml”
4 Structural Performance Deflection and deformation by static air pressure test (1.5 times desing wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm”
5 Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test” Tests to be conducted on site
6 Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000ml”
33 26A.4 Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. 30.72 Sqm 3309.10 101656.00
34 26A.6 Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in- Charge. For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.(Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item*).
(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. . The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. 286.17 Sqm 2213.50 633437.00
35 21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter/partition of approved brand and manufacturer, including providing and fixing top and bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of E/I(Door handle, lock and stopper etc. to be paid separately). 15.87 Sqm. 5143.00 81619.00
36 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing etc. complete at all levels.
36A 8.2.1 Rajnagar plain white marble/Udaipur green marble/Zebra black marble
8.2.1.2 Area of slab over 0.50 sqm 32.67 sqm 2,615.30 85442.00
36B 8.2.2 Granite of any colour and shade
8.2.2.2 Area of slab over 0.50 sqm 466.56 sqm 4401.20 2053424.00
37 8.3 Extra for providing edge moulding to 19 mm thick marble stone counters, Vanities etc. over item no. 8.2 mm thick marble stone counters, Vanities etc. over item no. 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. Granite work
B 8.3.2 Granite work 798.73 Mtr. 260.10 207750.00
38 8.4 Extra for fixing marble/granite stone over and above coresponding basic item, in facia and drops of width upto 150 mm with expoxy resin based (Araldite or equivalent) adhesive including cleaning etc. complete. 377.43 Mtr. 279.40 105454.00
39 11.72 Providing desination 100 A one brick flat soling joints filled with local sand including cost of watering texes, roualty all complete as per building specification and direction of E/l. 3485.97 Sqm. 283.30 987575.00
40 11.26 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 ( 1 lime : 1 surkhi: 1 coarse sand) / 1:4(1 cement:4 coarse sand)
41 11.27 Kota stone slabe 20 mm thick in riser of stps skiriting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Details of cost for 10 sqm 126.16 sqm 1334.9 168411.00
42 11.31 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. 167.20 m 82.9 13861.00
43 11.32 Extra for Kota stone/ sand stone in treads of steps and risers using single up to 1.05 metre. Length 68.31 sqm 18.10 1236.00
44 11.34 38 mm thick parquet (wood block ) flooring of 1st class teak wood laid over 25 mm thick levelling layer of cement concrete 1:2:4( 1cement : 2 coarse sand :4 store aggregate 10 mm nominal size ) to be paid seprateely coated with layer of hot bitumen (blown type ) @ 2.45kg per sqm. including fixing blocks in position after dipping in hot bitumen (blown type ) upto half depth, planed, levelled smooth and finished complete. 32.80 sqm 7936.30 260311.00
45 11.41A Providing and laying vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorptions less than 0.08% and conforming to IS : 15622 of approved brand & manufacturer in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement : 4 coarse sand) jointing with grey cement slurry @3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily.
11.41A.2 Glazed Vitrified floor tile polished finish of size
11.41A.2.2 Size of Tile 600 x1200 mm (for wall toilet) 181.08 sqm 1356.00 245544.00
46 11.41A.3 Glazed Vitrified tile Matt/ Antiskid finish of size
11.41A.3.1 Size of Tile 600 x 600 mm (for floor toilet) 82.27 sqm 1054.30 86737.00
47 11.41A Providing and laying vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorptions less than0.08% and conforming to IS : 15622 of approved brand & manufacturer in all colours and shades, laid on 20mm thick cement motar 1:4 (1cement : 4 coarse sand) jointing with grey cement slurry @3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily.
11.41A.3 GVT Matt/Antiskid finish of size
48 16.89 Providing and laying matt finished vitrified tile of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge 291.22 sqm 996.10 290088.00
49 16.90 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622, of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 72.81 sqm 1464.30 106610.00
50 11.53 Providing and fixing Glass mossaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and as required. pattern approved by Engineer-in-Charge 273.40 Sqm 3095.70 846364.00
51 13.11 Cement plaster in course sand 12mm cement plaster of mix :
52 13.24 6mm cement plaster to ceiling of mix:
53 13.13 20mm cement plaster of mix :
54A 13.37 Extra for plastering exterior walls of height more than 10m from ground level for every additional height of 3m or part thereof.10 to 13 m ht. 2660.44 sqm 44.40 118124.00
54B 13.37 Extra for plastering exterior walls of height more than 10m from ground level for every additional height of 3m or part thereof.13 to 16 m ht. 2660.44 sqm 44.40 118124.00
55 13.20 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cemnt: 5 coarse sand) and a top layer 6mm thick cement plaster 1:3 ( 1 cement; 3 coarse sand) finished rough with sponge. 57.63 sqm 227.40 13105.00
56 13.80 A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 9487.35 Sqm 105.40 999967.00
57 13.92 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade.
13.92.1 Two or more coat on new surface. 6769.91 Sqm 86.40 584920.00
58 13.94 Painting with sythetic enamel paint of approved brand and manufacture to give an even shade.
13.94.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. 973.63 Sqm. 116.50 113428.00
59 13.45 Finishing walls with textured exterior paint of as required. shade :
13.45.1 New work ( Two or more coats applied @ 3.28 ltr/10sqm) over and inculuding priming cost of exterior primer applied @ 2.20 kg /10sqm 4186.24 Sqm 215.20 900879.00
60 13.116A Polishing in high gloss/matt finish melamine clear polish on wood work in required colour/ wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sandpaper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill the small and big holes/ grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-charge. (Final coat to be done in 1 or 2 layers without gap of time) 231.22 sqm 786.90 181947.00
61 5.43 Providing and fixing in position stainless steel Grade 304 plate 1.0 mm thick as per design for expansion joints
62 5.44 Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness as required. to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre- engineered self-centering arrangement that freely rotates / moves in all directions. The Self – centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in-Charge .(Material shall confirm to ASTM 6063).
5.44.3 Floor Joint of 200mm gap 17.00 mtr 8931.60 151837.00
63 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C kitchen and thelike consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions. (ii) IInd course of 20mm cement plaster 1:3 (iii) litrd course of applying blown or/residual bitumen aplied hot at 1.7 kg. per sqm of area. (iv) lvth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC shet should be 100mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). 81.40 sqm 480.60 39121.00
64 22.20 Providing and fixing APP (Atactic Polypropylene Polymer ) modifieid prefabricated five layer 3mm thick water proofing membrane,black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sq. mtr. by the same membrane manufacture of density at 25degree centigrate,0.87 -0.89 kg/ltr and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc. and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be : joint strength in longitudinal and transvers direction at 23 degree centigrate as 650 / 450 N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150degree . Cold flexibility shall be upto -2 degree centigrate when tested in accordance with ASTM, D-5147 . The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane.
65 22.21 Extra for covering top of membrane with Geotexitle , 120 gsm non woven, 100 5% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heatiig the membrane by Butane torch as per manufactures recommendation. 1061.45 Sqm 85.20 90436.00
65A 12.38 Providing gola 75 x 75mm in cement concrete 1:2:4 (1 cement:2 coarse sand: 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 ( 1 cement: 3 fine sand) as per standerd design:
12.38.1 In 75x75mm deep chase 1061.45 sqm 66.00 70056.00
65B 12.39 Making khurras 45 x 45cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20mm nominal size) overP.V.C sheet 1mx 1m x 400 micron, finished with 12mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement rounding the edes and making and finishing the outlet complete. 117.00 Each 189.40 22160.00
65C 12.52 Grading roof for water proofing treatment with
12.52.2 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 106.20 cum 3932.20 417600.00
66 12.45.3 Providing and fixing false ceiling at all height including providing and fixing of frame work made up of special sections power pressed from M.S. sheet and galvanized in accordance with zinc coating of 120 gms/sqm as per IS:277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm at 1200 mm centre to centre one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts to the angle hanger of 25x25x5 mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connection clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5 mm thick 27 mm high having flanges of
20 mm and 30 mm long, the perimeter of ceiling fixed to wall/ partition with the help of rawl plugs at 450 mm centre to centre with 25 mm long drive-all screws @230 mm interval including jointing and fixing to a flush finish of tapered and square edges of the gypsum board with recommended filler, paper tapes, finishers and two coats of primer suitable for gypsum board as per manufacturers specification and also including the coat of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per the drawing and specification and direction of the the Engineer-in-charge but excluding the cost of painting.
12.5 mm thick tapered edge gypsum moisture resistant board 218.85 Sqm 993.00 217318.00
67 12.62 Extra for any sunk or raised moulding in the plaster of paris (Gypsum anhydrous ) ceilng .All complete as per specification and direction of E/I. 218.85 Sqm 283.00 61935.00
68 26.27 Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture,design and pattern. The tiles should have Humidity Resistance (RH) of 99%,Light Reflectance≥85%,Thermal Conductivity k=0.057 w/m K,Fire Performance as per (BS 476 pt-6 & 7)in true horizontal level suspended on interlocking T- Grid of hot dipped all round galvanised iron section of 0.33mm thick(galvanized @120gsm)comprising of main T runners of 15x32mm of length 3000mm,cross T of size15x32mm of length 1200mm and secondary intermediate cross T of size 15x32mm of length600mm to form grid module of size 600x600mm suspended from ceiling using galvanized mild steel item(galvanised @80gsm) 50mm long 8mm outer diameter M-6 dash fasteners,6mm diameter fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm,spaced at 1200mm centre to centre along main 'T'. The system should rest on periphery walls/partitions with the help of GI perimeter wall angle of size 24x24x3000mm made of 0.40 mm thick sheet, to be fixed to the wall with the help of plastic rawl plug at 450mm centre to centre & 40mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint,for all heights. The work shall be carried out as per specifications,drawings and as per directions of the engineer-in-charge.
26.27.1 With 16mm thick beveled tegular mineral fibre false ceiling tile (NRC0.55 to 0.6). 928.65 Sqm 1832.40 1701658.00
69 12.54X Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x 30 x 20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre , suspending the main C carrier of size 10x38x10 mm made of G.I. steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join C carrier and spring T connectors have to be used All sections to be galvanized @ 120 gms/sqm (both side inclusive) fixing with clip in tiles into spring 'T' with
12.54X.2 GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 m height. Made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive ) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester power coated of thickness 60 microns (minimum),including factory painted after bending and peforation. 655.27 Sqm 1752.80 1148557.00
70 CARRIAGE OF MATERIAL
A Coarse sand (138 km lead from Jagdishpur bhagalpur By ROAD) 2470.30 Cum. 3123.48 7715933.00
B Local Sand (Lead =2 km.Pacca+1km kacha) 1777.19 Cum. 316.15 561859.00
C Stone Chips (422 km lead from MIRZACHAUKI Sahebganj By Train) 2987.60 Cum. 3592.68 10733491.00
D Bricks (Lead =7 km.Pacca+1km kacha) 147723.70 Per 1000 1161.47 171576.65
E GSB (422 km lead from MIRZACHAUKI Sahebganj By Train) 229.50 Cum. 3592.68 824520.00
EXTRA FOR MATERIALS
71 a Add for Cement 1338.50 Per M.T 209.30 280148.00
b Add for Bricks 147723.70 Per 1000 549.75 81211.10
B NON-SCHEDULED ITEMS
72 N.S-1 Providing fitting and fixing modular rest room Greenlam cubicle partition of Model type Greenlam sturdo classique versatile-Evergreen series.model size as per dwg. over all height 1995 mm made up of 12 mm thick high pressure compact laminate with the combination of stainless steel hardwares with extruded anodised aluminium top rail and fixing channels. The adjustable foot shall be made from stainless steel and its base shall be anchored to the floor with nylon plugs fixed into ground with s.s screws with a ground clearance of 150 mm. Aluminium U-Channels shall be used to attach with the divider panels to the wall as well as the mid panel with stainless steel screw inserts. Aluminium top rail coated in stainless steel colour shall be used to fix the pilasters at the top. Doors shall be incorporated with the noise deafening tape to reduce the noise effect. All other fittings like hinges, coat hook, adjustable foot and lock set/latch indicator shall be stainless steel. All complete as per companys specification inclusive of all taxes and royalty and direction of E/I 8.00 Each 51,836.00 414688.00
73 N.S-3 (Approved Rate B.C.D Providing and fixing Glass Reinforced concrete (GRC) screens in approved size, pattern, design,thickness and colour of make MRK GRC or equivalent. The screens should be made from "53 grade" white portland cement manufactured by Grasim, Quartz,Fine silica and Alkali resistance glass fiber manufactured by "NEG"Japan or CEMFIL Spain or approved manufacturer. Super plasticizers manufactured by BASF or equivalent and U.V resistant synthetic inorganic pigments should be used for pigmentation manufactured by BAYFERROX Germany or equivalent. The material casting should take place in synthetic rubber/FRP mould manufactured by RECKLI or equivalent. Installations includes necessary scaffolding for all heights, fixing the individual or composite elements and there proper jointing/sealing with approved adhesives & sealant drilling holes in RCC/Brick work and fixing on external facade with dry fixing i.e to be done with required MS "L"shaped brackets, fasteners etc all complete including all taxes. As per architectural drawings and direction of E/I. 44.18 Sqm 12351.00 545667.00
74 N.S.-5 Providing and laying 200mm x 75 mm Terracota/cement tiles in wall cladding Brick colour over 12 mm cement mortar (1:3) and jointed with grey cement slurry, flush pointed with white cement & matching pigment including rubbing , polishing and cost of curing, taxes and royalty all complete as per building specifications and direction of E/I 481.82 Sqm. 1910.00 920276.00
75 NS- 06 Providing & Fixing of Wooden Acoustical Panelling with Armstrong wall panel woodwork laminate chaneeled G-21(LG1012) with clips 192x 2400 x 15 mm with aluminium keel all complete inclusive of all taxes and royalty as per companys specification and direction of Engineer-in-charge. 198.80 Sqm 5094.00 1012687.00
76 N.S.-7 Providing & Fixing of Sign Board in elevation 02 of Branding Box 16 x 13 inch Back Lit Lettering all complete inclusive of all taxes and royalty as per companys specification and direction of Engineer-in-charge. 1.00 Each 55488.00 55488.00
77 N.S.-8 Providing & Fixing of Sign Board in elevation 01 of Stainless Steel Letter 18 x 15 inch matt finish all complete inclusive of all taxes and royalty as per companys specification and direction of Engineer-in-charge. 1.00 Each 500546.00 500546.00
78 N.S-14 (Approved Rate B.C.D Supplying fitting and fixing Glass door handles, H-Type (QBGHL-5) made up of Stainless Steel brushed steel finish 600 mm heigh/equivalent make all complete including taxes and royalty as per approval and direction of E/I. 1.00 Each 2294.00 2294.00
79 N.S-15 (Approved Rate B.C.D Supplying fixing and fitting of Double cylinder heavy duty Floor Spring QBFS-94 for patch fittings suitable for door weight upto 120Kg.,door width upto 1100 mm, door height upto 2100 mm cover plate brushed steel finish made of graded aluminium alloy cast housing slim and compact size light in as per approval and direction of E/I. 1.00 Each 8334.00 8334.00
80 N.S-16 (Approved Rate B.C.D Supplying fixing and fitting high security corner lock for patch fitting(QBPL-1 make) brushed steel finish made of graded aluminium alloy cast housing slim and compact size light in weight all complete as per specification and direction of E/I 1.00 Each 2294.00 2294.00
81 N.S-21 (Approved Rate B.C.D Providing and fixing of Auto sensor Automatic sliding door with the mechanism by Dorma (Germany) all complete with all accessories and fittings inclusive of 12 mm plain toughened glass (St. Gobain) etc. complete including taxes and royalty & as per company specification and direction of E/I. 1.00 Each 383760.00 383760.00
PART - 2 : PHE WORK
A SCHEDULED ITEMS
82 17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
17.2.1 W.C. pan with ISI marked white solid plastic seat and lid 13.00 Each 4230.00 54990.00
83 17.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and GI clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:
A 17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern 2.00 Each 3723.20 7446.00
B 17.4.2 Range of two urinal basins with 5 litre PVC automatic flushing cistern 1.00 Each 5733.30 5733.00
C 17.4.3 Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern 1.00 Each 7929.00 7929.00
84 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :
a) 17.7.4 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap 16.00 Each 2135.80 34173.00
85 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 16.00 Each 1068.50 17096.00
86 17.34.1 Providing and fixing toilet paper holder :C.P. brass 13 Each 550.70 7159.00
87 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge 16 Each 886.20 14179.00
88 17.71 Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 10 Each 146.30 1463.00
89 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour,weighing not less than 88 gms. 5 Each 204.70 1024.00
90 17.16a Providing and fixing 8mm dia C.P./S.S. Jet with flexible tube upto 1meter long with S.S. Triangular plate to european type W.C. Of approved quality and make as approved by engineer in charge.(Health faucet) 13 Each 299.40 3892.00
91 18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
18.51.1 15 mm nominal bore 13 Each 708.40 9209.00
92 18.21.2.1 Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length , 15 mm nominal bore 31 Each 85.20 2641.00
93 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
18.53.1 15 mm nominal bore 18.00 Each 500.40 9007.00
94 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.(Toilet, Kitchen & Utility area) 4.00 Each 96.80 387.00
95 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work- Exposed on wall
18.7.4 32 mm nominal outer dia Pipes 60 Mtr. 395.20 23712.00
96 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Concealed work including cutting chases and making good the walls etc.
a) 18.8.2 20 mm nominal outer dia Pipes 75 Mtr. 350.80 26310.00
b) 18.8.3 25 mm nominal outer dia Pipes 60 Mtr. 463.10 27786.00
97 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 2500.00 per litre 9.70 24250.00
98 18.17 Supplying, fixing, testing and commissioning of Gate valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
99 18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end):
100 12.78 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.
101 12.79 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
102 12.81 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diameter and weighing not less than 440grams 12.0 Each 47.90 575.00
B NON-SCHEDULED ITEMS
103 N.S-11 Providing and fixing Forged Brass operated Ball Valve of full flow of superior quality having minimum working pressure of 16 kg/cm2.
a) 32 mm nominal bore 2.00 Each 2,013.00 4026.00
BOOSTER PUMP FOR WATER SUPPLY
104 N.S-12 BOOSTER PUMP NOS OF PUMP : FOR WATER SUPPLY WITH AUTOMATIC CONTROL PANEL 1.00 set 18,484.21 18484.00
(A) Horizontal,centifugal booster pump with suitable tefc squirrel cage induction motor working on single phase 50hz ± 3%, 415 ± 10% along with base frame, couplingguard,foundation bolt etc. Complete set as per relevent is and following moc,impellar and wearing ring-ss shaft with sleeves-ss,casing-ci,base frame-ms.
(B) The pump shall be selected for performance at best efficiency point. However , the pump selection shall be suitable for performance with set point @ ± 20% of the rated head.
WATER FLOW RATE : 5.75 LPS 2 bar pressure
Valves for pump.
105 N.S-13 Supplying, fixing, testing and commissioning of Y-Strainer of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
106 N.S-14 Supply fixing and testing UPVC SWR pipe confirming to IS:13592 for waste connection from wash basin and pantry sink to floor trap or thermosyphonage pipe with solvent cement joints including all the fittings laid above the fall ceilling connected in wall etc the shall include wall chiseling making good the same in cement mortar etc complete include with all necessary support like GI hangers support GI grip and bolts GI clamp etc in fall ceilling area as well as supplying and fixing GI slotted angle iron bracket hangers supports with necessary drilling holes to suit the insertion of pipe clamps deburring brick work concrete supports etc as per detailed drawing for supporting soil waste and rain water pipes and water supply pipes in shaft with suitable GI clamps GI bolts anchor nuts and washers fixed on shaft walls, outer walls etc.
107 N.S-15 Providing and fixing M.S. holder bat clamps of approved design including cost of cutting holes and making good the walls etc.
a 110mm dia pipe 24.00 Each 404.25 9702.00
b 75mm dia pipe 40.00 Each 352.00 14080.00
108 N.S-16 Providing fixing and testing UPVC SWR plain ring type 90 Deg Bend with door IS:14735
109 N.S-17 Providing fixing and testing UPVC SWR plain ring type 45 Deg Bend IS:14735
110 N.S-18 Providing fixing and testing UPVC SWR plain Single Y Branch with Door type fitting IS:14735
111 N.S-19 Providing fixing and testing UPVC SWR plain Reducing Single Y Branch Door type fitting IS:14735
112 N.S-20 Providing fixing and testing UPVC SWR plain Tee Branch with Door type fitting IS:14735
113 N.S-20A Providing and fixing and testing UPVC single floor trap with all necessary UPVC pipes connection extension pipe and reducing tee for water pipe connections from toilet and wash area.
114 N.S-21 Providing and fixing 75 mm dia, 3 mm thick Stainless steel grating with frame for floor traps or drains of required pattern including cutting and making good the floors complete.
SUB-HEAD - B : EXTERNAL PLUMBING WORKS
A SCHEDULED ITEMS
115 18.6 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes, U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
116 18.17 Providing and fixing gunmetal gate valve with CI wheel of approved quality (Screwed end)
a) 18.17.1 25mm nominal bore 16 Each 532.30 8517.00
b) 18.17.2 32mm nominal bore 6 Each 589.90 3539.00
c) 18.17.3 40mm nominal bore 6 Each 707.30 4244.00
d) 18.17.5 65mm nominal bore 6 Each 1490.70 8944.00
117 18.32 Constructing masonary chamber 30x30x50cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock with C.I. Surface box 100x100x75 mm ( inside) with hinged cover fixed in cement concrete slab 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement:5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design with F.P.S. bricks.
18.32.1 with common burnt clay F.P.S.(non module) brick of class designation 7.5 16 Each 1177.90 18846.00
118 18.33 Constructing masonary chamber 60x60x75cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. Surface box 100mm top diameter , 160 mm bottom diameter and 180 mm deep ( inside ) with chained lid and RCC top slab 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement:5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design with F.P.S. bricks.
18.33.1 with common burnt clay F.P.S.(non module) brick of class designation 7.5 22 Each 7210.60 158633.00
119 18.34 Constructing masonary chamber 90x90x100cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. Surface box 100mm top diameter , 160 mm bottom diameter and 180 mm deep ( inside ) with chained lid and RCC top slab 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement:5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design with F.P.S. bricks.
18.34.1 with common burnt clay F.P.S.(non module) brick of class designation 7.5 2 Each 13559.90 27120.00
120 18.59 Providing & fixing C.I double air valve of approved quality with bolts , nuts , rubber insertion etc complete (The tail pieces , tapers etc if required will be paid separately )
121 18.31 Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :
18.31.1.2 100mm dia Class-II 2 Each 4269.20 8538.00
122 BSR-2022 ITEM NO. 11 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
a) 11.3 65mm nominal bore 2 Each 3864.00 7728.00
b) 11.4 80mm nominal bore 2 Each 4588.00 9176.00
123 2.10 Excavating trenches of required width for pipes, cables etc. Including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5M including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering, etc. And disposing of surplus excavated soil as directed within a lead of 50 m Hard/dense soil.
2.10.1 All kind of soil
2.10.1.2 Pipes, cables etc, exceeding 80mm dia but not exeeding 300 mm dia 70 Metre 391.70 27419.00
124 2.11 Extra for Excavation trenches for pipes, cables etc. in all kind of soil for depth exceeding 1.5m but not exceding 3m (Rate is over corresponding basic item for depth up to 1.5m) 98 Metre 126.20 12368.00
125 2.13 Excavating trenches of required width for pipes, cables etc. Including excavation for sockets, depth upto 1.5M including getting out the excavated materials, returming the soil as required, in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc., stacking serviceable material for measurements And disposing of unserviceable material as directed within a lead of 50 m.
a) 2.13.1 Ordinary rock
2.13.1.2 Pipes, cables etc, exceeding 80mm dia but not exeeding 300 mm dia 25 Metre 863.70 21593.00
b) 2.13.3 Hard rock (blastig prihibited)
2.13.3.2 Pipes, cables etc, exceeding 80mm dia but not exeeding 300 mm dia 5 Metre 1614.20 8071.00
126 2.14 Extra for Excavation trenches for pipes, cables etc. in all kind of soil for depth exceeding 1.5m but not exceding 3m (Rate is over corresponding basic item for depth up to 1.5m) 41 Metre 108.40 4444.00
127 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W./RCC pipes including bed concrete as per standard design:
a) 19.2.3 200 mm diameter 90 Metre 576.30 51867.00
128 19.9 Constructing Brick Masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top with FPS bricks class designation 75 in cement mortar 1:4 (1 cement : 4 Coarse sand), inside cement plaster 12mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of of neat cement, foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design.
19.9.1 0.91m deep with SFRC cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S:12592, total weight of cover and frame to be not less than 182Kg. fixed in cement concrete 1:2:4 mix (1cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete.(Excavation foot rests and 12mm thick cement plaster at the external surface shall be paid for separately)
19.9.1.1 with common burnt clay F.P.S.(non module) brick of class designation 7.5 14 Each 7090.00 99260.00
129 19.10 Extra depth for circuler type manholes 0.91 m internal dia ( at bottom ) beyond 0.91m to 1.67 m .
19.10.1 With common burnt clay F.P.S. (non modular) bricks of class designation 100A 6.8 Meter 4917.95 33442.00
130 19.11 Constructing Brick Masonry circular type manhole 1.22 m internal dia at bottom and 0.56m dia at top with FPS bricks class designation 75 in cement mortar 1:4 (1 cement : 4 Coarse sand), inside cement plaster 12mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of of neat cement, foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design.
19.11.1 1.68m deep with SFRC cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S:12592, total weight of cover and frame to be not less than 182Kg. fixed in cement concrete 1:2:4 mix (1cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete.(Excavation foot rests and 12mm thick cement plaster at the external surface shall be paid for separately)
19.11.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 100A 14 Each 13865.00 194110.00
131 19.12 Extra depth for circuler type manholes 1.22 m internal dia ( at bottom ) beyond 1.68m to 2.29 m .
19.12.1 With common burnt clay F.P.S. (non modular) bricks of class designation 100A 5 Meter 6283.70 31419.00
132 19.13 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :
19.13.1 2.30 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :
19.13.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 100A 12 Each 30811.30 369736.00
133 19.14 Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m :
19.14.1 With common burnt clay F.P.S. (non modular) bricks of class designation 100A 4.8 Meter 15013.20 72063.00
134 2.7 Earthwork in excavation by mecanical means ( Hydraulic excavator) / manual means over area ( exceeding 30cm. in depth,1.5 m.in width as well as 10 sq. on plan) including dressing of sides and ramming of bottoms, lift up to 1.5m, including disposal of excavated earth, lead upto 50 m. and lift upto 1.5 disposaed earth to be levelled and neatly dressed.
A 2.7.1 Ordinary rock 51.69 cum 468.00 24191.00
B 2.7.3 Hard rock (blastig prihibited) 24.07 cum 1132.00 27247.00
135 13.11 Cement plaster in course sand -12 mm cement plaster of mix:
136 19.16 Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on12mm dia steel bar conforming to IS :1786 having minimum cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protrude legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with dtand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification make to be visible even after fixing, including fixing in manholes with 30x20x15cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design. 324 Each 310.90 100732.00
137 2.10 Excavating trenches of required width for pipes, cables etc. Including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5M including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering, etc. And disposing of surplus excavated soil as directed within a lead of 50 m Hard/dense soil.
2.10.1 All kind of soil
2.10.1.3 Pipes, cables etc, exceeding 300mm dia 420 Mtr. 611.60 256872.00
138 2.13 Excavating trenches of required width for pipes, cables etc. Including excavation for sockets, depth upto 1.5M including getting out the excavated materials, returming the soil as required, in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc., stacking serviceable material for measurements And disposing of unserviceable material as directed within a lead of 50 m.
2.13.1 Ordinary rock
a) 2.13.1.3 Pipes, cables etc, exceeding 300 mm dia 165 Mtr. 1279.30 211085.00
2.13.3 Hard rock (blastig prohibited)
b) 2.13.3.3 Pipes, cables etc, exceeding 300 mm dia 55 Mtr. 1859.20 102256.00
139 19.6 Providing and laying Non pressure NP2 RCC Pipes with collars jointed with stiff mixture of cement mortar in the propoertion of 1:2 (1 cement : 2 fine sand) including testing and jointing etc complete.
140 19.3 Providing and laying cement concrete 1:5:10 ( 1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) up to hunches RCC pipes sewer/storm drainage including in bed for pipes to be laid in trenches as per standard details.
141 19.27 Constructing brick masonary road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement :4 coarse sand ) including 500x450 mm precast RCC horizontal grating with frame complete as per standard design .
19.27.1 with common burnt clay F.P.S.(non module) brick of class designation 7.5 10 Each 3743.30 37433.00
142 19.28 Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design
19.28.1 with common burnt clay F.P.S.(non module) brick of class designation 7.5 10 Each 4295.90 42959.00
143 19.21 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
19.21.1 For pipes 100 to 250 mm diameter 2 Each 375.90 752.00
144 2.27.1 Extra for every additional lift of 1.5 m or part there of in excavation /
banking excavated or stacked materials
All kinds of soil -
for RWH -Exvn depth 1.5-6.0 782.76 Cum 49.40 38668.00
145 13.11.2 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
146 For external - wall only. (Note : 230mm ( for outer wall thickness) add in every chamber. So that outer wall dimension cover in measurement).
Total external plaster 132.1 sqm 152.90 20198.00
147 13.17.1 12 mm cement plaster finished with a floating coat of neat cement of mix : 129.34 sqm 203.60 26334.00
148 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 5.04 sqm 2975.20 14995.00
149 6.1A Brick work with bricks of class designation 100A in foundations and plinth in:
6.1.14A Cement mortar 1:6 (1 cement: 6 coarse sand ) 48.30 Cum 4819.90 232801.00
150 24.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
24.1.1 All types of soil
151 24.3.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
200 mm nominal size dia 20.0 Mtr. 940.80 18816.00
152 24.4 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
24.4.3 200 mm nominal size dia 100.0 Mtr. 1088.30 108830.00
153 24.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
154 24.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
155 24.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.
156 24.8 Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction ofEngineer-in-charge 3.00 cum 1343.20 4030.00
157 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. 40 Hr. 916.800 36672.00
158 24.13 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:
159 24.15 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).
160 BSR-2022 ITEM NO. 8 Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
B NON-SCHEDULED ITEMS
161 N.S-22 Providing & fixing in position 25 mm dia lawn hydrants consisting of 25 mm dia Ball valve, GI nipple and threaded hose receiver complete as required. 16 Each 3610.00 57760.00
162 N.S-23 Supplying and laying of following size DWC pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 16098 , Part II SN8 pipe complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) including refilling the trench, sand cushioning and protective covering etc., complete as required and including testing by smoke testing method complete as required in all respect.
a) 200 mm diameter 100 Metre 1400.00 140000.00
163 N.S-24 Providing, fixing, testing, commissioning of 200 mm dia. uPVC housing pipe 6Kg/Cm sq confirming to IS 12818. including required hire and labour charges, fittings & accessories etc. all complete, for all depths,as per direction of Engineer -in-charge. 45 Mtr. 4604.00 207180.00
164 N.S-25 Providing, fixing, testing, commissioning 200 mm dia. uPVC Slotted pipe 6Kg/Cm sq confirming to IS 12818. including required hire and labour charges, fittings & accessories etc. all complete, for all depths,as per direction of Engineer -in-charge. 40 Mtr. 5576.00 223040.00
165 (Derived rate Supplying ,delivery & installation of vertical wet type submersible pump suitable for following size bore well confirming to IS :8034 with standard MOC for noted cum/hr against noted total head of water column.............., 7.5 H.P app. motor having discharging capacity 19 cum/hour against a head of 120 metres. 1 Mtr. 60706.50 60707.00
PART -4 : FIRE FIGHTING SYSTEM
FIRE FIGHTING PUMP
166 BSR-2022 ITEM NO-1 Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :
(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.
(b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
(d) Suitable cement concrete foundation duly plastered with anti vibration pads.
167 BSR-2022 ITEM NO- 2 Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)
Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.
Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.
Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.
M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.
Suitable cement concrete foundation duly plastered and with anti vibration pads.
168 BSR-2022 ITEM NO- 3 Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)
Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.
Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325.
M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
Suitable cement concrete foundation duly plastered and with anti vibration pads.
169 BSR-2022 ITEM NO- 4 Supplying, installation, testing and commissioning of electric driven terrace pump with Electrical Panel suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)
(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520
b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.
(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.
170 BSR-2022 ITEM NO-5 CONTROL PANELS
5.1 Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :
250A, 50kA 4 Pole MCCB, Ics=100% Icu Rating
Digital Voltmeter 0-500V with selector switch
Ammeter (0-250 A) with selector swtich & CTs etc.
LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps
Set of Copper Bus Bar 300Amps
( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)
125 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets
63 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets
DIESEL ENGINE CONTROL
Control for diesel engine comprising -
Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode
Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication
Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter
All standard relays and accessories for automatic operation of diesel engine
System Controller
Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification 1.00 Each 248187.00 248187.00
171 BSR-2022 ITEM NO-7 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
a 7.9 200 mm dia (wall thickness 6.3 mm) 25 M 2692.00 67300.00
172 BSR-2022 ITEM NO-9 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
9.2 Single headed Stainless steel 3.00 set 5722.00 17166.00
173 BSR-2022 ITEM NO-10 Supplying and fixing single headed external yard hydrant valve with 1 no 63 mm dia instantaneous FM Gunmetal/Stainless coupling and cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
10.2 Single headed Stainless steel 10.00 set 5722.00 57220.00
174 BSR-2022 ITEM NO-11 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
175 BSR-2022 ITEM NO-14 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
176 N.S-27 Supplying and Fixing of C.I. flanged Foot valve with strainer complete in all respects, as required.
177 BSR-2022 ITEM NO-20 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. 1.00 Set 17707.00 17707.00
178 BSR-2022 ITEM NO-22 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. 2.00 Each 1442.00 2884.00
179 N.S-28 Supplying & Fixing of Gunmetal Bourdon Type pressure gauge with gunmetal isolation ball valve tapping and connecting pipe and nipple for pump sets, complete in all respects, as per Technical Specifications and Drawings, suitable for working pressure of 250 PSI. Cost shall be inclusive of providing any short pieces, nipples, elbows etc as required. 5.00 Each 772.00 3860.00
180 N.S-29 Supplying and fixing of Air release valve 25 NB, Gunmetal Cap release Type - Valve with ball valve & accessories. 5.00 Each 820.00 4100.00
181 BSR-22 27.0 Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.
182 BSR-2022 ITEM NO-13 Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. 13.00 Each 1236.00 16068.00
183 BSR-2022 ITEM NO-15 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.
184 BSR-2022 ITEM NO-16 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : 20.00 Each 4445.00 88900.00
16.2 Stainless Steel (Grade 304)
185 BSR-2022 ITEM NO-17 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.
20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585
20 mm nominal internal dia gun metal globe valve & nozzle.
Drum and brackets for fixing the equipmets on wall.
Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 3.00 Each 7920.00 23760.00
186 BSR-2022 ITEM NO-18 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :
18.2 Stainless Steel (Grade 304) 13.00 Each 1631.00 21203.00
187 N.S-30 Providing & Fixing weather proof lockable cabinet of size not less than 0.75x0.6x0.25 mtr made out of 16 gauge MS powder coated sheet of fully welded construction having central opening and 3 mm thick glazed glass doors (Two nos.) suitably marked on the outside with the letters "FIRE HOSE" including necessary locking arrangement and shall be painted with one coat of primer and two coats of synthetic enamel paint of approved shade complete as required. 13.00 Each 5337.00 69381.00
188 BSR-2022 ITEM NO-19 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
a 19.3 3 way - 150 mm dia M.S. Pipe 1.00 Each 9071.00 9071.00
189 AR ABC Powder Type (stored Pressure) Fire Extinguisher, 4kg. Capacity, ISI mark (IS:15683), squeeze grip valve, operating temperature (+5) degree Celcuis to (+55) degree Celcuis for class 3A Type of Fire Filed with MAP ABC Powder, Complete in all respect 12.00 Each 2295.00 27540.00
190 AR CO2 Type Fire Extinguisher , 4.5 Kg Capacity, ISI Mark (IS:15683) squeez grip valve, operating temperature (-30) degree Cel to (55) deg cel. For Class 13B type of Fire Fitted with 1 Mt. Hose & PVC Horn, Complete in all respect. 12.00 Each 5995.00 71940.00
191 AR Animal Resource 32 bit microprocessor based Intelligent Addressable Fire Alarm Control panel with 4 loops with battery back up. The panel would be modular, decentralized, with The panel shall be consisting with minimum 240 character LCD display and for networking. The Panel would be able to record atleast 60,000 events history. Each loop would be capable to have atleast 250 addressable detectors and addressable devices with up to 3.5km loop length.Make: Schrack Seconet (Vds approved) 1.00 Each 300000.00 300000.00
192 AR Animal Resource 1 KVA LINE INTERACTIVE UPS WITH 30 MIN BATTERY BACK UP 1.00 Each 30000.00 30000.00
193 AR Animal Resource Supplying and fixing Intelligent Addressable type multicriteria detector with base for use as heat or smoke or combined both with automatic electronic addressing, microprocessor type with builtin integrated short circuit isolator including testing, commissiong etc as reqd. 100.00 Each 3200.00 320000.00
194 AR Animal Resource Supplying and fixing Intelligent Addressable type Heat detector with base with automatic electronic addressing, microprocessor type with builtin integrated short circuit isolator including testing, commissiong etc as reqd. 1.00 Each 2750.00 2750.00
195 AR Animal Resource Sypplying and fixing Intelligent Addressable Manual Call Point having inbuilt short circuit isolator i/c testing and commissiong etc as reqd. 8.00 Each 3500.00 28000.00
196 AR Animal Resource Addressable sounder with interface module, power supply for suonder and programmable by software having integrated short circuit isolator & having operating temperature -10⁰C to + 55⁰C 8.00 Each 3750.00 30000.00
197 AR Animal Resource Analogue Addressable Control module with IP66 casing containing four relay outputs, each containing a potential-free DPDT contact with a fail-safe and in-built short circuit isolator The ambient temperature range shall be -20C to +60C. 4.00 Each 8050.00 32200.00
198 AR Animal Resource Supplying and Laying of 2X1.5 Sq.mm.marked copper FRLS wire with 20mm dia.PVC conduit pipe ISI marked, Complete with all fittings viz. Tees, Bends, Junction Boxes, Clamps/ Supports etc. 650.00 Mtr 135.00 87750.00
199 AR Animal Resource Duel LED Response Indicator (LOCAL) 20.00 Each 175.00 3500.00
AR Animal Resource CABLE & WIRING ACCESSORIES
200 AR Animal Resource 4"/4" JB for mounting of detectors & other accessories with necessary fittings 40.00 Each 135.00 5400.00
201 AR Animal Resource Supplying and fixing Outdoor Electronic Sounder with 4 distinct tone including 40W Speaker with required accessories as reqd. 8.00 Each 4150.00 33200.00
202 DSR-25 28.3.1 Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required. 1.00 set 132115.00 132115.00
203 DSR-25 28.3.2 Supplying, installation, testing & commissioning of 1.5W/3W/6W ceiling speaker complete as required. 60.00 Each 1025.00 61500.00
204 DSR-25 28.3.4 Supplying, installation, testing & commissioning of 1.5W/3W in ABS enclosure ceiling/wall speaker complete as required. 12.00 Each 2555.00 30660.00
205 DSR-25 28.2.15 Supplying, installation, testing & commissioning of horn cum strobe complete as required. 3.00 Each 3682.00 11046.00
206 DSR-25 28.5.3 Supplying and drawing of cable fire retardant PVC insulated copper conductor cable in existing surafce/ recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.
28.5.3.1 Speaker cable single pair, 2 core 1.5 sqmm 1125.00 mtr 61.00 68625.00
PART- 5 - ELECTRICAL WORKS
207 1.3 Wiring for light/fan point/ exhaust fan point/ call bell point with 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5sqmm FRLS PVC insulated copper conductor single core cable etc as required.
208 1.5 Wiring for light /power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 2250.0 Mtr 309.0 695250.00
209 1.7 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit (included ) as required
b 1.7.11 4 X 10 sq. mm + 1 X 6 sq. mm earth wire 200.0 Mtr 660.0 132000.00
210 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
1.24.8 Bell Push 4.0 Each 122.0 488.00
211 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. (GI box thickness shall be 1.6mm)
a 1.27.1 1 or 2 Module (75mmX75mm) 4.0 Each 234.0 936.00
212 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 25.0 Each 34.0 850.00
213 1.56 Supplying and fixing suitable size GI box with rnodular plate and cover in front on surface or in recess, including providing and fixing 3 nos. 5 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required. 54.0 Each 778.0 42012.00
214 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. 96.0 Each 414.0 39744.00
215 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 62.0 Each 531.0 32922.00
216 1.53 Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. 69.0 Each 683.0 47127.00
217 2.19 Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. 8.0 Each 1513.0 12104.00
218 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. 40.00 Each 64.00 2560.00
219 1.34 Supplying and fixing brass batten/ angle holder including connection etc. as required. 21.00 Each 80.00 1680.00
220 1.36 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. 4.00 Each 88.00 352.00
221 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required.
222 5.7 Supplying and fixing recess mounted following types LED downlighter with minimum efficacy 100 Im/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.
d AR Telhara Supply, fixing, testing and commissioning of Pendent 12 W COB light Eq as per Engineer In-charge. 300.00 Each 6321.00 1896300.00
e AR Telhara Supply, fixing, testing and commissioning of Track light 10 Watt. 80.00 Each 3741.00 299280.00
223 5.9 Supplying and fixing recess mounted 36 watt LED flat panel (2' X 2') with minimum efficacy 100 lm/w which provides soft light and glare free symmetrical illumination suitable for armstrong/grid ceiling and integrated electronic driver etc directly on false ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 30.00 Each 2663.00 79890.00
224 5.4 Supplying and fixing replaceable compact commercial batten suitable for Single T8 LED tube complete with 20 watt LED polycarbonate T8 tube with built in driver etc. directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 10.00 Each 834.00 8340.00
225 8.19 Supply and installation of 400 mm, 230 V A.C. wall/cabin fan including fixing the bracket, making connection, testing, commissioning etc as required. 15.00 Each 3670.00 55050.00
226 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 210 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. 55.00 Each 2482.00 136510.00
227 1.25 Supply and fixing of stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 55.00 Each 358.00 19690.00
228 8.18 Supply and fixing of following sweep/ sizes PVC/ABS square body Exhaust Fan with automatic openable louvre shutter in existing opening including making connection, testing etc as required.
229 5.10 Supplying and fixing 10/12 watt LED type Bulk-head luminaire with minimum efficacy 100 lm/w in comprising of pressure die cast housing, acrylic diffuser,lP 65 protection and complete u.,ith integrated electronic driver etc directly on wall/ceiling including connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable etc as required. 4.00 Each 1275.00 5100.00
230 5.15 Supplying and fixing fotrlowing types LED Flood light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on poleibuilding including connection earthing the body etc as required.
231 2.9 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
232 2.12 Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2.12.1 6A to 32A Single Pole 125.00 Each 237.00 29625.00
233 2.13 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for lnductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
234 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required 24.00 Each 13.00 312.00
235 2.17 Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
236 AR Animal Resource Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
150 mm width X 50 mm depth X 1.6 mm thickness 300 mtr 268.00 80400.00
237 3.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 4.00 Each 6323.00 25292.00
238 3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc. as required. 3.00 Each 16675.00 50025.00
239 3.9 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm). 175.00 mtr 133.00 23275.00
240 3.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 200.00 mtr 195.00 39000.00
241 4.1 Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, copper tube, having singte prong on top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required. 2.00 Each 1056.00 2112.00
242 4.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) 125.00 mtr 102.00 12750.00
243 4.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) 50.00 mtr 145.00 7250.00
244 4.11 Providing and fixing testing joint, made of 20 mm X 3 mm thick copper strip, 125 mm long, with 4 nos. of tinned brass bolts, nuts, chuk nuts and spring washers etc. complete as required. 2.00 Each 274.00 548.00
245 4.13 Providing and laying copper tape 32 mm X 6 mm from earth electrode directly in ground as required. 50.00 mtr 1530.00 76500.00
246 7.4 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
7.4.2 Above 35 sq. mm and upto 70 sq. mm (Clamped with 25 x 3 mm MS flat clamp) 50.0 mtr 109.00 5450.00
247 7.3 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required but excluding sand cushioning and protective covering.
7.3.3 Above 95 sq. mm and upto 185 sq. mm 150.0 mtr 143.00 21450.00
248 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
1.24.6 Telephone socket 15.00 Each 131.00 1965.00
249 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required
250 1.16 Supplying and drawing .5 mm dia FRLS pvc insulated annealed copper conductor unarmoured telephone wire in exisitng pvc conduit
251 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required
252 AR Animal Resource CCTV Network Camera Dome 4 MP Image Sensor - 1/3" Progressive Scan CMOS, Shutter Speed - 1/3s to 1/10,000 s, Lens - 2.7mm, 4mm, 6mm @ F2.0angle of view: 106°(2.7mm), 83°(4mm), 55.4°(6mm), Day &Night - IR cut filter with auto switch, White Balance - Automatic/Manual, Video Compression - H.264/MJPEG/H.264+, Max. Resolution - 2688×1520, Communication Interface - 1 RJ45 10M/100M Ethernet port, Base T. 15.00 Each 6800.00 102000.00
253 AR Animal Resource CCTV Network Camera Bullet 4 MP Image Sensor - 1/3" Progressive Scan CMOS, Shutter Speed - 1/3s to 1/10,000 s, Lens - 2.7mm, 4mm, 6mm @ F2.0angle of view: 106°(2.7mm), 83°(4mm), 55.4°(6mm), Day &Night - IR cut filter with auto switch, White Balance - Automatic/Manual, Video Compression - H.264 /MJPEG /H.264+, Max. Resolution - 2688×1520, Communication Interface - 1 RJ45 10M/100M Ethernet port, Base T . 15.00 Each 7100.00 106500.00
254 AR Animal Resource Supply / Installation and Commissioning of Network Video Recorder,H.26+/H.265/H.264/H.264+ video formats,Connectable to the third-party network cameras,Up to Min 32 IP cameras can be connected,Recording at up to Min 8 MP resolution,Supports live view, storage, and playback of the connected camera at up to Min 8 MP resolution,HDMI and VGA independent outputs ,HDMI Video output at up to 4K (3840 × 2160) resolution ,4 SATA interfaces connectable for recording and backup ,2 self-adaptive 10/100/1000 Mbps network interface ,Centralized management of IP cameras, including configuration, information import/export, real-time information display, two-way audio, upgrade, etc.,Connectable to smart IP cameras and the recording, playing back, and backing up of VCA alarms can be realized,VCA detection alarm is supported Instant playback for assigned channel during multi-channel display mode,Smart search for the selected area in the video; and smart playback to improve the playback efficiency,Connect for easy network management 1.00 Each 42300.00 42300.00
255 AR Animal Resource Supply Installation Testing & Commissioning of IP Video Storage device shall be a Min 30 days recording,Min RAID-3 protected, all-in-one recording for network surveillance systems It shall be designed for high speed, high capacity Network video storage and high performance play back applications.The video storage array shall have Min 5 internal HDDs (4 x 10TB) Min 4 TB. The storage array shall provide an audible alarm to notify the user in the event of a failure. The system should be such that the vedio recording from camera should be done directly on storage array and directions of Engineer-in-charge. LED indicators Features trayless hard drive insertion Dissipates heat efficiently with aluminum housing. Software configuration if any.Complete in all respects. 4.00 Each 18000.00 72000.00
256 DSR-25 42.1 Supplying Installation Testing Commissioning of Central Control Server System comprising of Intel® Xeon® CPU E5-2640 x64 (or better compatible with dual and quad core processors, Windows 11 (Professional, Enterprise, Ultimate, 64 bit), Windows Server 2013 R2 (Standard, Enterprise, 64 bit) 16 GB or more, Video card and monitor capable of displaying at 1024 x 768 resolution or better, Latest Microsoft Licence Version Operating System Loaded with MS OFFICE 2019 Professional, Word, EXCEL, Power Point, Outlook Express, Microsoft Team official version lifetime licences suitable for running BMS software complete etc. as required. 1.00 Each 186434.00 186434.00
257 AR (ICCC Bihar Sharif) LFD Monitor ,42" Professional Full HD LED Monitor with Wall Mount 2.00 Each 54900.00 109800.00
258 1.58 Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed PVC conduit as required.
259 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required
260 AR Resham Smart-UPS On-Line, 5.4 kW / 6 kVA with 1 hour Backup12 V 65 AH SMF Battery UPS Toplogy Double Conversion On-Line, Power Rating (VA / Watts) 5400Watts/6000VA, Form Factor Rack/Tower Convertible; Output Power Capacity 5400 Watts/6000 VA, Max Configurable Power 5400Watts/6000VA, Nominal Output Voltage 230V, Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage, Efficiency at Full Load 94.00%, Output Voltage Distortion Less than 3%,Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz,Crest Factor 03:01,Waveform Type Sine Wave, Output Connections (1)*Hard Wire 3-wire (8)*(H N + G) IEC 320 C13(8),Bypass Built-in Bypass, Output Short Circuit Protection Yes,Parallel Redundancy (Option) 1 + 1, Nominal Input Voltage 230V,Input Power Factor>0.98,Input Frequency 40-70Hz,Input Connections Terminal Block, Protection Thermal Circuit Breaker (250VAC/20A), Input voltage range for main operations full load 160 - 285V, Input voltage range for mains operation half load 160-285V, High Voltage withstand Capability 420 VAC, Green Mode Range 210-250 VAC (230 V), Battery Type Mintenance - free sealed Lead-Acid battery with suspended, electrolyte. 12V 65 Ah SMF battery for 60 Min Battery Back up. 1.0 Each 284500.00 284500.00
Solar with Net Meter to be Provided by the Contractor
261 AR Multi Model Design, Supply, Installation, Testing and Commissioning of 30 KW Solar System with all below items. (Approved OEM-Heron India Pvt ltd / Ojas Solar Energy/ Solar Power Tech) 30 Hp 61060 1831800.00
Solar PV Panel 300 Watts Multi Crystalline SPV Module (100 sets 300W PV Module for 30KW) Nominal Power at STC, Pmax W 200wp Power tolerance at STC (min/ max) % 200+/- 3 Voltage at Pmax, Vmp V 30VDC Current at Pmax, Imp A 8.26A Open circuit voltage, Voc V 36VDC Short Circuit Current, Isc A 8.78A Norninal Operating Solar Cell temperature (NOCT) Deg C 47Deg C +/-2 Maximum System voltage V DC 1000 Temp. Coefficient of Pmax %/ K -0.39% °C Temp. Coefficient of Voc %/ K -0.31% °C Temp. Coefficient of Isc %/ K -0.05% °C IP protection Level IP65 Absolute Maximum Ratings -40°C to 85° C Operating Temperature Deg C (-40 to +85) Storage Temperature Deg C (-40 to +85) Mechanical Parameters L x W xH 1662 x 992 x42 (PV Module Make-Lubi / Canadian Solar/ Waree).
Solar PCU 30 Kva 180 MPPT Base Power conditioning unit will comply the following requirements. • 415V AC + 5% 50Hz, 3 Phase • Overload capacity – 150% for 60sec. • Output wave shape: sine wave with <3% total harmonic distortion (THD). • Adjust the Voltage and Frequency Levels to suit the Grid, Devices to connect with existing system.
Module Mounting Structure & Stand The array structure shall be made of hot dip galvanized MS angles of size not less than 50mm x 50mm x 6mm size. The minimum thickness of galvanized shall be at least 70 microns. All nuts & bolts shall be made of good quality steel. The work should be completed with supply, fitting fixing of clamps, saddles, nut & bolts etc. While quoting the rate, the bidder may mention the design & type of structure offered. All nuts & bolts shall be made of very good quality steel. The structure shall be designed to allow easy replacement of any module and shall be in line with site requirements. The structure shall be designed for simple mechanical and electrical installation. It shall support SPV modules at a given orientation, absorb and transfer the mechanical loads to the ground properly. There shall be no requirement of welding or complex machinery at site. The array structure shall be so designed that it will occupy minimum space without sacrificing the output from SPV panels & shall withstand heavy winds. The supplier / manufacturer shall specify installation details of the PV modules and the support structures with appropriate diagrams and drawings
1C X 4 Sq. mm PVC Cu cable All the cables shall be supplied conforming to IS 694 & shall be of 650 V/ 1.1 kV grade as per requirement. Only FRLS PVC copper cables shall be used. The size of the cables between array interconnections, array to junction boxes, junction boxes to DCDB, DCDB to PCU etc shall be so selected to keep the voltage drop and losses to the minimum. Bidders are required to mention each size of cables used and should consider their resistance / impedance in the design optimization. Such calculation should be submitted along with the bid. The contractor shall supply all installation accessories, which are required to install and successfully commission the power plant.
1C X 25 Sq. mm PVC Cu cable All the cables shall be supplied conforming to IS 694 & shall be as per requirement. Only FRLS PVC copper cables shall be used. The size of the cables between array interconnections, array to junction boxes, junction boxes to DCDB, DCDB to PCU etc shall be so selected to keep the voltage drop and losses to the minimum. Bidders are required to mention each size of cables used and should consider their resistance / impedance in the design optimization. Such calculation should be submitted along with the bid. The contractor shall supply all installation accessories, which are required to install and successfully commission the power plant.
3.5C x 25 Sq. mm PVC Cu cable All the cables shall be supplied conforming to IS 694 & shall be as per requirement. Only FRLS PVC copper cables shall be used. The size of the cables between array interconnections, array to junction boxes, junction boxes to DCDB, DCDB to PCU etc shall be so selected to keep the voltage drop and losses to the minimum. Bidders are required to mention each size of cables used and should consider their resistance / impedance in the design optimization. Such calculation should be submitted along with the bid. The contractor shall supply all installation accessories, which are required to install and successfully commission the power plant.
Array Junction Box as required The junction boxes shall have suitable arrangement for the following: • Combine groups of modules into independent charging sub-arrays that shall be wired to the controller. • Provide arrangement for disconnection for each of the groups. • Provide a test point for each sub-group for quick fault location. • To provide group array isolation. • The rating of the JB’s shall be suitable with adequate safety factor to inter connect the Solar PV array. • Metal oxide varistors shall be provided inside the Array Junction Boxes
Earthing Kit The array structure of the PV yard shall be grounded properly using adequate number of earthing kits. All metal casing / shielding of the plant shall be thoroughly grounded to ensure safety of the power plant. Earthing shall be in line with IE rules. The earthing & grounding shall also meet the requirement of PV module/cell manufacturer.
Surge Protector The DIN channel mountable pluggable surge protection shall be installed in a network configuration, consisting of a single block MOV (Metal Oxide Varistor) based surge arrester having nominal surge handling capacity of 15 KA 8/20 µs & maximum surge handling capacity of 30 KA 8/20 µs to provide protection between (L+, L-, earth). All surge arresters in these network configurations shall be of same manufacturer. The Protection unit shall be based on Single block High Capacity Metal Oxide Varistors (MOV), capable of handling 15 KA 8/20 μs surges and shall be able to give an indication in the event module failure and shall be pluggable to facilitate the on site replacement without disturbing the lines. One extra set of replacement protective device shall be furnished to the job site. Protection shall be manufactured to withstand a maximum continuous operating voltage of not less than 115% of normal RMS system voltage. A changover switch shall be provided if required at time of complition to connect solar supply to main supply.
Lightning & Over Voltage Protection
B - EXTERNAL ELECTRICAL
SUB HEAD 4- EXTERNAL LIGHTING
262 8.22 Supply and erection of 6 metre height Hot-dip galvanized octagonal street Iight pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, made of 3 mm thick sheet along with base plate of size 220 X 220 X 12 mm , small door opening for junction box mounting including 6A 'C' series SP MCB, connector, and suitable size foundation bolts with template as required.(but without pole foundation)
263 8.24 Supply and erection of 8 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 155 mm, made of 3 mm thick sheet along with base plate of size 260 X 260 X 16 mm , small door opening for junction box mounting with MCB & connector, cement concrete of 1:3:6 including excavation, refilling and suitable size foundation bolts with template and all complete job as required. (but without pole foundation)
264 5.14 Supplying and fixing following type LED type street light with die cast aluminium housing for ingress protection of IP65 and complete with all accessories etc, on pole/building including connection with FR PVC insulated copper conductor cable and earthing the body etc. as required.
265 5.13 Supplying and fixing post top / gate light (width 250/300 mm) made up of high grade unbreakable polycarbonate material suitable for upto 20 watt LED lamp including connections and earthing the body etc as required. ( But without lamp) 4.00 Each 1399.00 5596.00
SUB HEAD 6- CABLE WORKS
CABLE TERMINATION
266 DSR-25 11.1 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
267 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required.
268 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required.
269 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 4.0 Each 6536.00 26144.00
270 2.7 Providing and fixing following capacity four pole ON-load panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required.
271 2.5 Providing and fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections, earthing the body etc. as required.
a 2.5.3 200amps, 415 V heavy duty three phase with neutral busbar chamber 1.0 Each 10550.00 10550.00
b 2.5.6 500amps, 415 V heavy duty three phase with neutral busbar chamber 1.0 Each 26329.00 26329.00
272 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required.
273 8.11 Suppling and fixing wall/floor mounted cubical panel board, fabricated with 18 gauge iron sheet, suitable for panel mounted switch disconnector, including bus bar chamber, insulator and painting etc as required. (but without bus bar copper strip) 100.0 Each 1809.00 180900.00
The switchboard shall be complete with all inter connections, risers, internal wiring, labels etc complete as required
274 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required.
275 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 1.00 Each 6536.00 6536.00
276 Providing and fixing following capacity four pole ON-load panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required.
277 2.5 Providing and fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections, earthing the body etc. as required.
2.5.3 200amps, 415 V heavy duty three phase with neutral busbar chamber 1.00 Each 10550.00 10550.00
278 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required.
279 8.11 Suppling and fixing wall/floor mounted cubical panel board, fabricated with 18 gauge iron sheet, suitable for panel mounted switch disconnector, including bus bar chamber, insulator and painting etc as required. (but without bus bar copper strip) 100.00 sft 1809.00 180900.00
280 2.20 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel at least 2 mm thick, vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 13.0 Each 214.00 2782.00
281 DSR-25 Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete.
282 AR BCD Supplying, installation, testing and Commissioning of passenger Car Type Elevator (lifts) 13/884 Kg-1 MPS (for Four stop, G+3 One No. lift) with fan, fully automatic state of the art technologies, make from World Fame manufactures, all complete job .( Make- ONLY THYSSON KRUPP/SCHINDLER /KONE /MITSUBISI/OTIS /JOHNSON. Note:- Half portion of the door is glass fittings. Work including 3rd Party and Electrical Inspection also. 1.00 Each 2177100.00 2177100.00
PRODUCT : GeN2-Nova DETAILS : GeN2-Nova VXN CAPACITY (kgs) : 884 Kg, 13 persons. SPEED (mps) : 1 mps RISE (m) : 16.5 m STOPS : 4 Stops With (all opening on the same side) CONTROLLER TYPE :ACD3-MR DRIVE :VF Regenerative (Closed Loop) POWER SUPPLY :400/415 Volts (3 Phase AC) OPERATION : Full collective operation CAR GROUP : One car (simplex) MACHINE :PM Gearless (Located above shaft) TRACTION MEDIA :Flat Coated Steel Belt CAR FINISH : Rear Mid Panel = Stainless Steel #4(Hairline) Rear Corner Panels = Stainless Steel #4(Hairline) Side Panels = Stainless Steel #4(Hairline) Front Panels = Stainless Steel #4(Hairline) FALSE CEILING TYPE :CD-41 FLASE CEILING FINISH : Stainless Steel #4(Hairline) VENTILLATION : Cross flow fan HAND RAILS : Stainless Steel Mirror Finish Handrails on rear car panels FLOORING :Vinyl Tiles CAR DOOR FINISH : Stainless Steel #4(Hairline) LANDING DOORS FINISH : Stainless Steel #4(Hairline) FIRE RATED DOORS : Fire rating-60mins PIT DEPTH : 1350 OVERHEAD 4500 HOISTWAY DIMENSIONS (W x D – mm) :2300 mm W x 1950 mm D CAR DIMENSIONS (W x D x H - mm) :1600 mm W x 1350 mm D x 2200 mm D CAR & HOISTWAY DOOR TYPE :Central opening (CO) doors DOOR OPENING (W x H - mm) :900 mm W x 2000 mm H DOOR OPERATOR :DC Door Operator COP : COP for stops <= 12 (950mm) in Stainless Steel #4(Hairline) CAR POSITION INDICATOR :Monochrome LCD-Blue Background & White font HALL FIXTURES :O2000 HALL FIXTURE FACE PLATE :Stainless Steel #4(Hairline) HALL BUTTON ARRANGEMENT :Hall Button with HPI.
5-Years Lift Maintenance
First Year (Free) 1.00 Each 0.00 0.00
Second Year @ 5% of SITC 1.00 Each 108855.00 108855.00
Third Year @ 6% of SITC 1.00 Each 130626.00 130626.00
Forth Year @ 7% of SITC 1.00 Each 152397.00 152397.00
Fifth Year @ 8% of SITC 1.00 Each 174168.00 174168.00
283 5.33.1 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cementcontent as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and including retard setting of concrete, improve workability without impairing strength and admixtures in recommended proportions as per IS: 9103 to accelerate, reinforcement,durability as per direction of Engineer-in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum.Excess or less cement used as per design mix is payable or recoverable separately.All works up to Plinth level. 112.21 cum 5063.40 568164.00
284 5.33.2 All works above Plinth level up to floor five level. 46.15 cum 5863.20 270587.00
285 16.53 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable lengt ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) 101.00 metre 272.60 27533.00
286 9.21 Providing and fixing ISI marked flush door shuttersconfirming to IS: 2202(Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 2.52 sqm 1775.30 4474.00
287 9.127.2 Providing & Fixing decorative high Pressure Laminateed sheet of plain/ wood grains in gloss/matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality confirming to IS:2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick. 5.54 Sqm. 669.00 3709.00
288 9.147D.1 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multichambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of as required. length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of as required. size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable
Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) 5.40 Sqm. 7074.90 38204.00
289 2.29 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m.
2.29.1 All kinds of soil 2389.00 100sqm 1355.40 32380.51
290 16.78 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.
16.78.1 With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 229.50 Cum. 1310.40 300737.00
291 16.80 Construction of dry lean cement concrete sub base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per specifications, cement content not to be less than 150 Kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc. complete as per direction of Engineer- in- charge. 101.25 Cum. 2054.30 207998.00
292 16.42 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to as required. slope and camber in panels as required. including consolidation finishing and tamping complete. 166.65 Cum. 4649.00 774756.00
293 16.69 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the as required. line, level and curvature, jointed with cement mortar 1:3 (1cement:3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever as required. complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 13.78 Cum. 7998.80 110223.00
294 13.82B Finishing with Epoxy paint (two or more coats) at all locations prepared surfaces.
13.82B.2 On concrete work 236.25 Sqm 122.70 28988.00
295 16.91 Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of as required. strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in as required. colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per as required. size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer- in-Charge.
A 16.91.1 60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern 112.50 Sqm. 714.00 80325.00
296 16.63 Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete and as per direction of Engineer-in-charge. 72.00 Sqm. 427.70 30794.00
297 16.88 Providing and laying matt finished vitrified tile of size 100x100x16mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in out door floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer-in-Charge. 460.00 Sqm. 1611.50 741290.00
298 16.87 Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of as required. size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer- in-Charge.
16.87.1 With granite stone of colour black, cherry/ruby red of area less than 0.50 sqm. 195.00 Sqm. 3543.90 691061.00
299 6.1A Brick work with bricks of class designation 100A in foundation and plinth in:
6.1.14A cement mortar 1:6 (1 cement : 6 coarse sand) 15.43 cum 4819.90 74371.00
300 11.30 40 mm thick fine dressed stone flooring over 20 mm (average) thick base with joint finished flush: base 1:5 ( 1 cement : 5 coarse sand) with joints 3mm thick,side buttered with cement motar 1:2(1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar.
11.30.1 Red sand stone 99.00 sqm 849.20 84071.00
301 2.2 Banking excavated earth in layers not exceeding 20 cm.In depth, breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up ; in embankments for roads, flood banks, marginal banks, and guide banks etc, lead upto 50 m and lift upto 1.5 m.
2.2.1 All kinds of soil 53.11 Cum. 386.60 20532.00
302 23.1 Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). 100.00 Cum 44.70 4470.00
303 23.2 Supplying and stacking of good earth at site including royalty but excluding carriage (earth measured in stacks will be reduced by 20% for payment). 100.00 cum 143.50 14350.00
304 23.3 Supplying and stacking sludge at site including royalty and carriage (sludge measured in stacks will be reduced by 8% for payment). 100.00 cum 282.60 28260.00
305 23.4.2 Supplying and stacking at site dump manure from approved source, excluding carriage (manure measured in stacks will be reduced by 8% for payment). Screened through sieve of I.S. Destination 16 mm. 100.00 cum 299.40 29940.00
306 23.5 Rough dressing the trenched ground including breaking clods 1000.00 100 sqm 85.90 859.00
307 23.6 Uprooting weeds trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. 1000.00 100 sqm 283.20 2832.00
308 23.7 Fine dressing the ground 1000.00 100 sqm 208.80 2088.00
309 23.8 Spreading of sludge, dump manure or/and good earth in required thickness (cost of sludge, dump manure or/and good earth to be pais separately). 300.00 cum 30.10 9030.00
310 23.9 mixing earth and sludge or manure in proportion specified or directed. 1500.00 Cum 20.90 31350.00
23.10.3 Grassing with 'Doob' grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing including supplying good earth if needed. In rows 5 cm apart in either direction. 1000.00 100 sqm 1027.40 10274.00
311 23.14 Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :
A 23.14.1 Holes 1.2m dia, &1.2m deep 75.00 Each 536.50 40238.00
B 23.14.2 Holes 60cm dia, &60cm deep 50.00 Each 69.30 3465.00
312 DSR 2.28/2025 Preparation of mounds of various size and shape by available excavated /supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.
Circular mounds
Irrgular Mound 50.00 Cum 696.20 34810.00
313 DSR 2.54/2025 Anti termite treatment by digging pits 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termiteinfection chemicals used Chlorpyriphos 20% EC in ratio 1%concentration and as per direction of officer-in-charge. 800.00 Nos 70.25 56200.00
314 DSR 2.13/2025 Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure orextra earth to be paid for separately) 60.00 Cum 339.85 20391.00
315 DSR 4.83/2025 Providing and Displaying plants Vinca different colour 6 to 8 well developed branch in full bloom stacked with green painted Bamboo stick in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. 75.00 Each 59.20 4440.00
316 10.1.25 DSR 2025 Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge.Petunia hybrid. 260.00 Each 6.14 1596.00
317 4.28 DSR 2025 Providing and Displaying plants Dianthus dwarf specimen 6-8 plants in a pot with fresh & healthy foliage in full bloom well developed in 35 cm Earthen Tray/Nand as per direction of the officer-in-charge. 60.00 Each 382.50 22950.00
318 10.1.18 DSR 2025 Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge.Gerbera hybrid. 250.00 Each 22.27 5568.00
319 10.2.2 DSR 2025 Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge.Celosia argentea. 250.00 Each 4.81 1203.00
320 6.3 DSR 2025 Providing and Displaying of Asparagus marrie plant, well developed 15 to 20 leaves, full of branches and foliage in 25 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. 300.00 Each 60.20 18060.00
321 6.2 DSR 2025 Providing and Displaying of Alternanthera species plant of height 15 cm to 20 cm, full of branches and foliage in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. 300.00 Each 21.65 6495.00
322 6.25 DSR 2025 Providing and Displaying of Syngonium (Butterfly) variegated plant with 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. 300.00 Each 33.70 10110.00
323 6.31 DSR 2025 Providing and Displaying of Zebrina Trades cantia plant having in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. 300.00 Each 21.65 6495.00
324 DSR7.4/2025 Supply and stacking of Alstonia scholaris plant of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge. 100.00 Nos 71.00 7100.00
325 DSR7.18/2025 Supply and stacking of Cassia javanica plant of height 120-150 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 100.00 Nos 93.90 9390.00
326 DSR7.44/2025 Supply and stacking of Foxtail palm plant of ht. 240-270 cm bottom girth 35-40 cm well developed in big size HDPE bags as per direction of the officer-in-charge. 15.00 Nos 704.20 10563.00
327 DSR7.48/2025 Supply and stacking of Jacaranda mimosifolia plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 125.00 Nos 65.00 8125.00
328 DSR7.70/2025 Supply and stacking of Plumeria alba of height 165-180 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. 30.00 Nos 244.65 7340.00
329 DSR7.68/2025 Supply and stacking of Plumeria acutifolia of height 150-165 cm. with 3- 4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. 40.00 Nos 216.65 8666.00
SHRUBS & HEDGES
330 DSR6.2/2025 Providing and Displaying of Alternanthera species plant of height 15 cm to 20 cm, full of branches and foliage in 15 cm size of Earthen Pot / PlasticPot & as per direction of the officer-in-charge. 300.00 Nos 21.65 6495.00
331 DSR6.12/2025 Providing and Displaying of Duranta Golden plant, having ht.15 to 20 cm bushty shape plant with fresh and healthy leaves in 20 cm size of EarthenPot / Plastic Pot & as per direction of the officer-in-charge.. 300.00 Nos 22.85 6855.00
332 DSR6.20/2025 Providing and Displaying of Ophiopogon jaburan (variegated ) plant, full of variegated leaves in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. 300.00 Nos 24.05 7215.00
333 DSR6.29/2025 Providing and Displaying of Tradiscantia plant, full of leaves in Earthen Pot/ Plastic Pot of size 20 cm. as per direction of the officer-in-charge. 300.00 Nos 22.85 6855.00
334 DSR6.30/2025 Providing and Displaying of Wadelia trilobata plant, full of leaves in 15 cm size of Poly bags & as per direction of the officer-in-charge. 300.00 Nos 16.85 5055.00
Add GST @ 5.36% on (civil work & fire fighting work sor 2022) 6538212.61
NAME OF PROJECT:- CONSTRUCTION OF BABA KARU KHIRHAR MUSEUM AT SAHARSHA - BIHAR.
Cost OF B.O.Q 147571183.00
Earnest Money 2475711.83 Round off=2475800.00
Bid Document Cost Rs. 10,000.00
Time of Completion 12 MONTH
BILL OF QUANTITY
Sl. No. Ref Items of Works Quantity Unit Rate Amount
A SCHEDULED ITEMS
1 2022 BSR 2.8.1 Earthwork in excavation in foundation trenches or drains(not exceeding 1.5m in width or 10 sqm on plan)including dressing of sides and ramming of bottom lift upto 1.5m,including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m All kinds of soil. 3326.41 Cum. 360.70 1199836.00
2 2.26 Filling available excavated earth(including rock)in trenches ,plinth,sides of foundation etc.in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead. 1369.68 Cum. 123.90 169703.00
3 2.28 Supplying and Filling in plinthy with local sand and under floors including watering ,ramming consolidating and dressing complete. 1723.94 Cum. 287.30 495288.00
S.H. II: MASONRY WORK
4 6.1A Brick work with bricks of class designation 100A in foundation and plinth in:
6.1.12/1 cement mortar 1:4 (1 cement : 4 coarse sand) 29.62 cum 5017.90 148630.00
5 6.47 Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). 877.38 cum 5350.00 4693983.00
5a 6.21A Extra for providing and placing in position 2 Nos, 6mm dia, MS bars at every third course of half brick masonry (with F.P.S. brick) 690.00 sqm 113.60 78384.00
6 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering work upto plitn level: 1:2:4(1Cement :2 Coarse sand:4 graded tone aggregate 20mm nominal size) 184.78 cum 3998.10 738769.00
6A 4.17 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3coarse sand : 6 graded stone aggregate20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. 164.00 sqm 436.60 71602.00
7 5.33 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
5.33.1 All works up to plinth level
5.33.1.2 Concrete of M-30 grade with minimum cement content of 350 kg/cum 1041.86 cum 5189.10 5406316.00
8 5.33.2 All works above Plinth level up to floor five level.
5.33.2.2 Concrete of M-30 grade with minimum cement content of 350 kg/ cum 1146.87 cum 5989.00 6868604.00
9 5.9 Centering and shuttering including strutting,propping etc and removal of form for:
A 5.9.1 Foundation,footing,Bases of column etc for mass concrete. 295.23 sqm 211.60 62471.00
B 5.9.3 Suspended floors,Roofs, landings, balconies and access platform. 2622.48 sqm 437.50 1147335.00
C 5.9.5 Lintels,Beams,Plinth beams,girders,bressumers and cantilevers. 4175.67 sqm 404.70 1689894.00
D 5.9.6 Columns,Pillars,Piers,Abutments,Posts and struts. 2763.80 sqm 494.40 1366423.00
F 5.9.2 Walls including attached pilasters 130.23 sqm 375.10 48849.00
10 5.22 Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding complete.
A 5.22.7A Thermo-Mechanically Treated barsTMTC-500-8mm dia 47847.07 Kg. 94.50 4521548.00
B 5.22.7B Thermo-Mechanically Treated barsTMTC-500-10mm dia 69815.35 Kg. 92.60 6464901.00
C 5.22.7C Thermo-Mechanically Treated barsTMTC-500-12mm dia 46390.08 Kg. 90.80 4212219.00
D 5.22.7D Thermo-Mechanically Treated barsTMT FE-500-16 to 25 mm dia 221638.02 Kg. 91.70 20324206.00
11 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.) 1452.60 kg 546.80 794282.00
12 10.33 Providing and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying a priming coat of approved steel primer
10.33.3 G.I. Pipes 40mm nominal bore (class B) 1484.88 kg 150.00 222732.00
13 9.48 Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. all comlete.
9.48.1 Fixed to steel windows by welding. 14630.59 kg 144.50 2114120.00
14 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140mm internal diameter 73mm height,5mm thick rim bottom and top lids 1.5mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3mm dia round headed screws,one at the corners :Clamps shall be made of 12mm dia M.S bar bent to shape as per standard drawing. 50.00 Each 165.40 8270.00
15 9.1 Providing wood work in frames of doors, windows, clerestroy windows and other frames, wrought framed and fixed in position:
9.1.1 Second class teak wood 1.71 cum 120526.60 206100.00
16 9.136 Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG GI sheet ( Zinc coating not less than 120gm/m²) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes Fire Rated Door Shutters. The frame is fitted with intumuscent fire seal trip of size 10x4 mm minimum alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per directions of Engineer - in- charge . (Dash fastener to be paid for separately). 109.20 Mtr. 1462.70 159727.00
17 9.137 Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 min Fire Rating confirming to IS:3614 (Part II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles,lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I. sheet (zinc coating not less than 120gm/m²) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately). 56.70 Sqm 6445.00 365432.00
18 9.138 Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators & partitions etc., with G.I. beading of appropriate size,made out of 20 SWG G.I. sheet (zinc coating not less than120 gm/m²)fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc, complete in all respect as per direction of Engineer-incharge.(Actual glass size is to be measured at site for payments).
9.138.1 With clear fire resistant glass panes 6 mm thick of approved brand, having minimum 60 minutes fire resistance 56.70 Sqm 31796.30 1802850.00
19 9.139 Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. 8.00 Each 7,061.50 56492.00
20 9.20 Providing and fixing ISI marked flush door shutters confirming to IS: 2202(Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
9.20.1 35 mm thick including Stainless Steel butt hinges with necessary screws. 83.16 sqm 2845.60 236640.00
21 9.24 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded)
9.24.1 Rectangular or square 5.00 sqm 173.90 870.00
22 9.53 Providing 40 x 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bots, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) 176.00 Each 130.80 23021.00
23 9.74 Providing and fixing bright finished brass tower bolt (barrel type) with necessary screws etc. complete.
24 9.103 Providing and fixing bright finished brass 100mm mortice latch and lockwith 6 lever handles with necessary screws etc. complete (best make of approved quality) 4.00 Each 655.40 2622.00
25 9.81 Providing and fixing bright finished brass handle with necessary screws etc. complete.
26 9.82 Providing and fixing bright finished brass hangging type floor door stoper with necessary screws etc. complete. 29.00 Each 108.10 3135.00
27 9.88 Providing and fixing chromium plated brass 100 mm latch and lock with 6 levers and a pair of handles of approved quality with necessary screws etc. complete 25.00 Each 733.10 18328.00
28 9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564,embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete 25.00 Each 810.10 20253.00
29 9.147D Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multichambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of as required. length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of as required. size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable
9.147D.5 Three track three panels sliding window made of (big series)frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) 238.86 Sqm 8624.00 2059929.00
30 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. (Cost of aluminium snap bading shall be paid in basic item.)
21.3.2 With glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm) 244.26 Sqm 1115.10 272374.00
31 26A.1 Providing and supplying aluminium extruded tubular and other aluminium sections as per the rchitectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS74,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). 6040.80 kg 370.40 2237512.00
32 26A.2 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels,including:a
a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc.structural and weather silicone sealants, flashings, fire stop,(barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:
b) Fabricating and supplying serrated M.S. hot dip galvanised /Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel frame work of building structure using stainless steel anchor fasteners/ bolts,nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.
c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture,as per the approved sealant design, within and all around the perimeter for holding glass.
d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.
Note :- 1 The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places.
Note :- 2 The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by BL(National Accreditation Board for Testing and Calibration boratories), Department of Science &Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories
1 Performance Laboratory Test for Air Leakage Test (-50pa to –300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr”
2 Static Water Penetration Test. (50pa to 1500pa) as per ASTME-331-09 testing method for a range up to 2000 ml.”
3 Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01-05 testing method for a range upto 2000 ml”
4 Structural Performance Deflection and deformation by static air pressure test (1.5 times desing wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm”
5 Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test” Tests to be conducted on site
6 Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000ml”
33 26A.4 Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. 30.72 Sqm 3309.10 101656.00
34 26A.6 Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in- Charge. For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.(Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item*).
(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. . The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. 286.17 Sqm 2213.50 633437.00
35 21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter/partition of approved brand and manufacturer, including providing and fixing top and bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of E/I(Door handle, lock and stopper etc. to be paid separately). 15.87 Sqm. 5143.00 81619.00
36 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing etc. complete at all levels.
36A 8.2.1 Rajnagar plain white marble/Udaipur green marble/Zebra black marble
8.2.1.2 Area of slab over 0.50 sqm 32.67 sqm 2,615.30 85442.00
36B 8.2.2 Granite of any colour and shade
8.2.2.2 Area of slab over 0.50 sqm 466.56 sqm 4401.20 2053424.00
37 8.3 Extra for providing edge moulding to 19 mm thick marble stone counters, Vanities etc. over item no. 8.2 mm thick marble stone counters, Vanities etc. over item no. 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. Granite work
B 8.3.2 Granite work 798.73 Mtr. 260.10 207750.00
38 8.4 Extra for fixing marble/granite stone over and above coresponding basic item, in facia and drops of width upto 150 mm with expoxy resin based (Araldite or equivalent) adhesive including cleaning etc. complete. 377.43 Mtr. 279.40 105454.00
39 11.72 Providing desination 100 A one brick flat soling joints filled with local sand including cost of watering texes, roualty all complete as per building specification and direction of E/l. 3485.97 Sqm. 283.30 987575.00
40 11.26 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 ( 1 lime : 1 surkhi: 1 coarse sand) / 1:4(1 cement:4 coarse sand)
41 11.27 Kota stone slabe 20 mm thick in riser of stps skiriting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Details of cost for 10 sqm 126.16 sqm 1334.9 168411.00
42 11.31 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. 167.20 m 82.9 13861.00
43 11.32 Extra for Kota stone/ sand stone in treads of steps and risers using single up to 1.05 metre. Length 68.31 sqm 18.10 1236.00
44 11.34 38 mm thick parquet (wood block ) flooring of 1st class teak wood laid over 25 mm thick levelling layer of cement concrete 1:2:4( 1cement : 2 coarse sand :4 store aggregate 10 mm nominal size ) to be paid seprateely coated with layer of hot bitumen (blown type ) @ 2.45kg per sqm. including fixing blocks in position after dipping in hot bitumen (blown type ) upto half depth, planed, levelled smooth and finished complete. 32.80 sqm 7936.30 260311.00
45 11.41A Providing and laying vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorptions less than 0.08% and conforming to IS : 15622 of approved brand & manufacturer in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement : 4 coarse sand) jointing with grey cement slurry @3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily.
11.41A.2 Glazed Vitrified floor tile polished finish of size
11.41A.2.2 Size of Tile 600 x1200 mm (for wall toilet) 181.08 sqm 1356.00 245544.00
46 11.41A.3 Glazed Vitrified tile Matt/ Antiskid finish of size
11.41A.3.1 Size of Tile 600 x 600 mm (for floor toilet) 82.27 sqm 1054.30 86737.00
47 11.41A Providing and laying vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorptions less than0.08% and conforming to IS : 15622 of approved brand & manufacturer in all colours and shades, laid on 20mm thick cement motar 1:4 (1cement : 4 coarse sand) jointing with grey cement slurry @3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily.
11.41A.3 GVT Matt/Antiskid finish of size
48 16.89 Providing and laying matt finished vitrified tile of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge 291.22 sqm 996.10 290088.00
49 16.90 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622, of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 72.81 sqm 1464.30 106610.00
50 11.53 Providing and fixing Glass mossaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and as required. pattern approved by Engineer-in-Charge 273.40 Sqm 3095.70 846364.00
51 13.11 Cement plaster in course sand 12mm cement plaster of mix :
52 13.24 6mm cement plaster to ceiling of mix:
53 13.13 20mm cement plaster of mix :
54A 13.37 Extra for plastering exterior walls of height more than 10m from ground level for every additional height of 3m or part thereof.10 to 13 m ht. 2660.44 sqm 44.40 118124.00
54B 13.37 Extra for plastering exterior walls of height more than 10m from ground level for every additional height of 3m or part thereof.13 to 16 m ht. 2660.44 sqm 44.40 118124.00
55 13.20 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cemnt: 5 coarse sand) and a top layer 6mm thick cement plaster 1:3 ( 1 cement; 3 coarse sand) finished rough with sponge. 57.63 sqm 227.40 13105.00
56 13.80 A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 9487.35 Sqm 105.40 999967.00
57 13.92 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade.
13.92.1 Two or more coat on new surface. 6769.91 Sqm 86.40 584920.00
58 13.94 Painting with sythetic enamel paint of approved brand and manufacture to give an even shade.
13.94.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. 973.63 Sqm. 116.50 113428.00
59 13.45 Finishing walls with textured exterior paint of as required. shade :
13.45.1 New work ( Two or more coats applied @ 3.28 ltr/10sqm) over and inculuding priming cost of exterior primer applied @ 2.20 kg /10sqm 4186.24 Sqm 215.20 900879.00
60 13.116A Polishing in high gloss/matt finish melamine clear polish on wood work in required colour/ wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sandpaper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill the small and big holes/ grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-charge. (Final coat to be done in 1 or 2 layers without gap of time) 231.22 sqm 786.90 181947.00
61 5.43 Providing and fixing in position stainless steel Grade 304 plate 1.0 mm thick as per design for expansion joints
62 5.44 Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness as required. to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre- engineered self-centering arrangement that freely rotates / moves in all directions. The Self – centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in-Charge .(Material shall confirm to ASTM 6063).
5.44.3 Floor Joint of 200mm gap 17.00 mtr 8931.60 151837.00
63 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C kitchen and thelike consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions. (ii) IInd course of 20mm cement plaster 1:3 (iii) litrd course of applying blown or/residual bitumen aplied hot at 1.7 kg. per sqm of area. (iv) lvth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC shet should be 100mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). 81.40 sqm 480.60 39121.00
64 22.20 Providing and fixing APP (Atactic Polypropylene Polymer ) modifieid prefabricated five layer 3mm thick water proofing membrane,black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/sq. mtr. by the same membrane manufacture of density at 25degree centigrate,0.87 -0.89 kg/ltr and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc. and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be : joint strength in longitudinal and transvers direction at 23 degree centigrate as 650 / 450 N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150degree . Cold flexibility shall be upto -2 degree centigrate when tested in accordance with ASTM, D-5147 . The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane.
65 22.21 Extra for covering top of membrane with Geotexitle , 120 gsm non woven, 100 5% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heatiig the membrane by Butane torch as per manufactures recommendation. 1061.45 Sqm 85.20 90436.00
65A 12.38 Providing gola 75 x 75mm in cement concrete 1:2:4 (1 cement:2 coarse sand: 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 ( 1 cement: 3 fine sand) as per standerd design:
12.38.1 In 75x75mm deep chase 1061.45 sqm 66.00 70056.00
65B 12.39 Making khurras 45 x 45cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20mm nominal size) overP.V.C sheet 1mx 1m x 400 micron, finished with 12mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement rounding the edes and making and finishing the outlet complete. 117.00 Each 189.40 22160.00
65C 12.52 Grading roof for water proofing treatment with
12.52.2 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 106.20 cum 3932.20 417600.00
66 12.45.3 Providing and fixing false ceiling at all height including providing and fixing of frame work made up of special sections power pressed from M.S. sheet and galvanized in accordance with zinc coating of 120 gms/sqm as per IS:277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm at 1200 mm centre to centre one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts to the angle hanger of 25x25x5 mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connection clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5 mm thick 27 mm high having flanges of
20 mm and 30 mm long, the perimeter of ceiling fixed to wall/ partition with the help of rawl plugs at 450 mm centre to centre with 25 mm long drive-all screws @230 mm interval including jointing and fixing to a flush finish of tapered and square edges of the gypsum board with recommended filler, paper tapes, finishers and two coats of primer suitable for gypsum board as per manufacturers specification and also including the coat of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per the drawing and specification and direction of the the Engineer-in-charge but excluding the cost of painting.
12.5 mm thick tapered edge gypsum moisture resistant board 218.85 Sqm 993.00 217318.00
67 12.62 Extra for any sunk or raised moulding in the plaster of paris (Gypsum anhydrous ) ceilng .All complete as per specification and direction of E/I. 218.85 Sqm 283.00 61935.00
68 26.27 Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture,design and pattern. The tiles should have Humidity Resistance (RH) of 99%,Light Reflectance≥85%,Thermal Conductivity k=0.057 w/m K,Fire Performance as per (BS 476 pt-6 & 7)in true horizontal level suspended on interlocking T- Grid of hot dipped all round galvanised iron section of 0.33mm thick(galvanized @120gsm)comprising of main T runners of 15x32mm of length 3000mm,cross T of size15x32mm of length 1200mm and secondary intermediate cross T of size 15x32mm of length600mm to form grid module of size 600x600mm suspended from ceiling using galvanized mild steel item(galvanised @80gsm) 50mm long 8mm outer diameter M-6 dash fasteners,6mm diameter fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm,spaced at 1200mm centre to centre along main 'T'. The system should rest on periphery walls/partitions with the help of GI perimeter wall angle of size 24x24x3000mm made of 0.40 mm thick sheet, to be fixed to the wall with the help of plastic rawl plug at 450mm centre to centre & 40mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint,for all heights. The work shall be carried out as per specifications,drawings and as per directions of the engineer-in-charge.
26.27.1 With 16mm thick beveled tegular mineral fibre false ceiling tile (NRC0.55 to 0.6). 928.65 Sqm 1832.40 1701658.00
69 12.54X Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x 30 x 20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre , suspending the main C carrier of size 10x38x10 mm made of G.I. steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join C carrier and spring T connectors have to be used All sections to be galvanized @ 120 gms/sqm (both side inclusive) fixing with clip in tiles into spring 'T' with
12.54X.2 GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 m height. Made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive ) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester power coated of thickness 60 microns (minimum),including factory painted after bending and peforation. 655.27 Sqm 1752.80 1148557.00
70 CARRIAGE OF MATERIAL
A Coarse sand (138 km lead from Jagdishpur bhagalpur By ROAD) 2470.30 Cum. 3123.48 7715933.00
B Local Sand (Lead =2 km.Pacca+1km kacha) 1777.19 Cum. 316.15 561859.00
C Stone Chips (422 km lead from MIRZACHAUKI Sahebganj By Train) 2987.60 Cum. 3592.68 10733491.00
D Bricks (Lead =7 km.Pacca+1km kacha) 147723.70 Per 1000 1161.47 171576.65
E GSB (422 km lead from MIRZACHAUKI Sahebganj By Train) 229.50 Cum. 3592.68 824520.00
EXTRA FOR MATERIALS
71 a Add for Cement 1338.50 Per M.T 209.30 280148.00
b Add for Bricks 147723.70 Per 1000 549.75 81211.10
B NON-SCHEDULED ITEMS
72 N.S-1 Providing fitting and fixing modular rest room Greenlam cubicle partition of Model type Greenlam sturdo classique versatile-Evergreen series.model size as per dwg. over all height 1995 mm made up of 12 mm thick high pressure compact laminate with the combination of stainless steel hardwares with extruded anodised aluminium top rail and fixing channels. The adjustable foot shall be made from stainless steel and its base shall be anchored to the floor with nylon plugs fixed into ground with s.s screws with a ground clearance of 150 mm. Aluminium U-Channels shall be used to attach with the divider panels to the wall as well as the mid panel with stainless steel screw inserts. Aluminium top rail coated in stainless steel colour shall be used to fix the pilasters at the top. Doors shall be incorporated with the noise deafening tape to reduce the noise effect. All other fittings like hinges, coat hook, adjustable foot and lock set/latch indicator shall be stainless steel. All complete as per companys specification inclusive of all taxes and royalty and direction of E/I 8.00 Each 51,836.00 414688.00
73 N.S-3 (Approved Rate B.C.D Providing and fixing Glass Reinforced concrete (GRC) screens in approved size, pattern, design,thickness and colour of make MRK GRC or equivalent. The screens should be made from "53 grade" white portland cement manufactured by Grasim, Quartz,Fine silica and Alkali resistance glass fiber manufactured by "NEG"Japan or CEMFIL Spain or approved manufacturer. Super plasticizers manufactured by BASF or equivalent and U.V resistant synthetic inorganic pigments should be used for pigmentation manufactured by BAYFERROX Germany or equivalent. The material casting should take place in synthetic rubber/FRP mould manufactured by RECKLI or equivalent. Installations includes necessary scaffolding for all heights, fixing the individual or composite elements and there proper jointing/sealing with approved adhesives & sealant drilling holes in RCC/Brick work and fixing on external facade with dry fixing i.e to be done with required MS "L"shaped brackets, fasteners etc all complete including all taxes. As per architectural drawings and direction of E/I. 44.18 Sqm 12351.00 545667.00
74 N.S.-5 Providing and laying 200mm x 75 mm Terracota/cement tiles in wall cladding Brick colour over 12 mm cement mortar (1:3) and jointed with grey cement slurry, flush pointed with white cement & matching pigment including rubbing , polishing and cost of curing, taxes and royalty all complete as per building specifications and direction of E/I 481.82 Sqm. 1910.00 920276.00
75 NS- 06 Providing & Fixing of Wooden Acoustical Panelling with Armstrong wall panel woodwork laminate chaneeled G-21(LG1012) with clips 192x 2400 x 15 mm with aluminium keel all complete inclusive of all taxes and royalty as per companys specification and direction of Engineer-in-charge. 198.80 Sqm 5094.00 1012687.00
76 N.S.-7 Providing & Fixing of Sign Board in elevation 02 of Branding Box 16 x 13 inch Back Lit Lettering all complete inclusive of all taxes and royalty as per companys specification and direction of Engineer-in-charge. 1.00 Each 55488.00 55488.00
77 N.S.-8 Providing & Fixing of Sign Board in elevation 01 of Stainless Steel Letter 18 x 15 inch matt finish all complete inclusive of all taxes and royalty as per companys specification and direction of Engineer-in-charge. 1.00 Each 500546.00 500546.00
78 N.S-14 (Approved Rate B.C.D Supplying fitting and fixing Glass door handles, H-Type (QBGHL-5) made up of Stainless Steel brushed steel finish 600 mm heigh/equivalent make all complete including taxes and royalty as per approval and direction of E/I. 1.00 Each 2294.00 2294.00
79 N.S-15 (Approved Rate B.C.D Supplying fixing and fitting of Double cylinder heavy duty Floor Spring QBFS-94 for patch fittings suitable for door weight upto 120Kg.,door width upto 1100 mm, door height upto 2100 mm cover plate brushed steel finish made of graded aluminium alloy cast housing slim and compact size light in as per approval and direction of E/I. 1.00 Each 8334.00 8334.00
80 N.S-16 (Approved Rate B.C.D Supplying fixing and fitting high security corner lock for patch fitting(QBPL-1 make) brushed steel finish made of graded aluminium alloy cast housing slim and compact size light in weight all complete as per specification and direction of E/I 1.00 Each 2294.00 2294.00
81 N.S-21 (Approved Rate B.C.D Providing and fixing of Auto sensor Automatic sliding door with the mechanism by Dorma (Germany) all complete with all accessories and fittings inclusive of 12 mm plain toughened glass (St. Gobain) etc. complete including taxes and royalty & as per company specification and direction of E/I. 1.00 Each 383760.00 383760.00
PART - 2 : PHE WORK
A SCHEDULED ITEMS
82 17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
17.2.1 W.C. pan with ISI marked white solid plastic seat and lid 13.00 Each 4230.00 54990.00
83 17.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and GI clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:
A 17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern 2.00 Each 3723.20 7446.00
B 17.4.2 Range of two urinal basins with 5 litre PVC automatic flushing cistern 1.00 Each 5733.30 5733.00
C 17.4.3 Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern 1.00 Each 7929.00 7929.00
84 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :
a) 17.7.4 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap 16.00 Each 2135.80 34173.00
85 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 16.00 Each 1068.50 17096.00
86 17.34.1 Providing and fixing toilet paper holder :C.P. brass 13 Each 550.70 7159.00
87 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge 16 Each 886.20 14179.00
88 17.71 Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 10 Each 146.30 1463.00
89 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour,weighing not less than 88 gms. 5 Each 204.70 1024.00
90 17.16a Providing and fixing 8mm dia C.P./S.S. Jet with flexible tube upto 1meter long with S.S. Triangular plate to european type W.C. Of approved quality and make as approved by engineer in charge.(Health faucet) 13 Each 299.40 3892.00
91 18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
18.51.1 15 mm nominal bore 13 Each 708.40 9209.00
92 18.21.2.1 Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length , 15 mm nominal bore 31 Each 85.20 2641.00
93 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
18.53.1 15 mm nominal bore 18.00 Each 500.40 9007.00
94 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.(Toilet, Kitchen & Utility area) 4.00 Each 96.80 387.00
95 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work- Exposed on wall
18.7.4 32 mm nominal outer dia Pipes 60 Mtr. 395.20 23712.00
96 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Concealed work including cutting chases and making good the walls etc.
a) 18.8.2 20 mm nominal outer dia Pipes 75 Mtr. 350.80 26310.00
b) 18.8.3 25 mm nominal outer dia Pipes 60 Mtr. 463.10 27786.00
97 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 2500.00 per litre 9.70 24250.00
98 18.17 Supplying, fixing, testing and commissioning of Gate valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
99 18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end):
100 12.78 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.
101 12.79 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
102 12.81 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diameter and weighing not less than 440grams 12.0 Each 47.90 575.00
B NON-SCHEDULED ITEMS
103 N.S-11 Providing and fixing Forged Brass operated Ball Valve of full flow of superior quality having minimum working pressure of 16 kg/cm2.
a) 32 mm nominal bore 2.00 Each 2,013.00 4026.00
BOOSTER PUMP FOR WATER SUPPLY
104 N.S-12 BOOSTER PUMP NOS OF PUMP : FOR WATER SUPPLY WITH AUTOMATIC CONTROL PANEL 1.00 set 18,484.21 18484.00
(A) Horizontal,centifugal booster pump with suitable tefc squirrel cage induction motor working on single phase 50hz ± 3%, 415 ± 10% along with base frame, couplingguard,foundation bolt etc. Complete set as per relevent is and following moc,impellar and wearing ring-ss shaft with sleeves-ss,casing-ci,base frame-ms.
(B) The pump shall be selected for performance at best efficiency point. However , the pump selection shall be suitable for performance with set point @ ± 20% of the rated head.
WATER FLOW RATE : 5.75 LPS 2 bar pressure
Valves for pump.
105 N.S-13 Supplying, fixing, testing and commissioning of Y-Strainer of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
106 N.S-14 Supply fixing and testing UPVC SWR pipe confirming to IS:13592 for waste connection from wash basin and pantry sink to floor trap or thermosyphonage pipe with solvent cement joints including all the fittings laid above the fall ceilling connected in wall etc the shall include wall chiseling making good the same in cement mortar etc complete include with all necessary support like GI hangers support GI grip and bolts GI clamp etc in fall ceilling area as well as supplying and fixing GI slotted angle iron bracket hangers supports with necessary drilling holes to suit the insertion of pipe clamps deburring brick work concrete supports etc as per detailed drawing for supporting soil waste and rain water pipes and water supply pipes in shaft with suitable GI clamps GI bolts anchor nuts and washers fixed on shaft walls, outer walls etc.
107 N.S-15 Providing and fixing M.S. holder bat clamps of approved design including cost of cutting holes and making good the walls etc.
a 110mm dia pipe 24.00 Each 404.25 9702.00
b 75mm dia pipe 40.00 Each 352.00 14080.00
108 N.S-16 Providing fixing and testing UPVC SWR plain ring type 90 Deg Bend with door IS:14735
109 N.S-17 Providing fixing and testing UPVC SWR plain ring type 45 Deg Bend IS:14735
110 N.S-18 Providing fixing and testing UPVC SWR plain Single Y Branch with Door type fitting IS:14735
111 N.S-19 Providing fixing and testing UPVC SWR plain Reducing Single Y Branch Door type fitting IS:14735
112 N.S-20 Providing fixing and testing UPVC SWR plain Tee Branch with Door type fitting IS:14735
113 N.S-20A Providing and fixing and testing UPVC single floor trap with all necessary UPVC pipes connection extension pipe and reducing tee for water pipe connections from toilet and wash area.
114 N.S-21 Providing and fixing 75 mm dia, 3 mm thick Stainless steel grating with frame for floor traps or drains of required pattern including cutting and making good the floors complete.
SUB-HEAD - B : EXTERNAL PLUMBING WORKS
A SCHEDULED ITEMS
115 18.6 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes, U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
116 18.17 Providing and fixing gunmetal gate valve with CI wheel of approved quality (Screwed end)
a) 18.17.1 25mm nominal bore 16 Each 532.30 8517.00
b) 18.17.2 32mm nominal bore 6 Each 589.90 3539.00
c) 18.17.3 40mm nominal bore 6 Each 707.30 4244.00
d) 18.17.5 65mm nominal bore 6 Each 1490.70 8944.00
117 18.32 Constructing masonary chamber 30x30x50cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock with C.I. Surface box 100x100x75 mm ( inside) with hinged cover fixed in cement concrete slab 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement:5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design with F.P.S. bricks.
18.32.1 with common burnt clay F.P.S.(non module) brick of class designation 7.5 16 Each 1177.90 18846.00
118 18.33 Constructing masonary chamber 60x60x75cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. Surface box 100mm top diameter , 160 mm bottom diameter and 180 mm deep ( inside ) with chained lid and RCC top slab 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement:5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design with F.P.S. bricks.
18.33.1 with common burnt clay F.P.S.(non module) brick of class designation 7.5 22 Each 7210.60 158633.00
119 18.34 Constructing masonary chamber 90x90x100cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. Surface box 100mm top diameter , 160 mm bottom diameter and 180 mm deep ( inside ) with chained lid and RCC top slab 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement:5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design with F.P.S. bricks.
18.34.1 with common burnt clay F.P.S.(non module) brick of class designation 7.5 2 Each 13559.90 27120.00
120 18.59 Providing & fixing C.I double air valve of approved quality with bolts , nuts , rubber insertion etc complete (The tail pieces , tapers etc if required will be paid separately )
121 18.31 Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :
18.31.1.2 100mm dia Class-II 2 Each 4269.20 8538.00
122 BSR-2022 ITEM NO. 11 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
a) 11.3 65mm nominal bore 2 Each 3864.00 7728.00
b) 11.4 80mm nominal bore 2 Each 4588.00 9176.00
123 2.10 Excavating trenches of required width for pipes, cables etc. Including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5M including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering, etc. And disposing of surplus excavated soil as directed within a lead of 50 m Hard/dense soil.
2.10.1 All kind of soil
2.10.1.2 Pipes, cables etc, exceeding 80mm dia but not exeeding 300 mm dia 70 Metre 391.70 27419.00
124 2.11 Extra for Excavation trenches for pipes, cables etc. in all kind of soil for depth exceeding 1.5m but not exceding 3m (Rate is over corresponding basic item for depth up to 1.5m) 98 Metre 126.20 12368.00
125 2.13 Excavating trenches of required width for pipes, cables etc. Including excavation for sockets, depth upto 1.5M including getting out the excavated materials, returming the soil as required, in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc., stacking serviceable material for measurements And disposing of unserviceable material as directed within a lead of 50 m.
a) 2.13.1 Ordinary rock
2.13.1.2 Pipes, cables etc, exceeding 80mm dia but not exeeding 300 mm dia 25 Metre 863.70 21593.00
b) 2.13.3 Hard rock (blastig prihibited)
2.13.3.2 Pipes, cables etc, exceeding 80mm dia but not exeeding 300 mm dia 5 Metre 1614.20 8071.00
126 2.14 Extra for Excavation trenches for pipes, cables etc. in all kind of soil for depth exceeding 1.5m but not exceding 3m (Rate is over corresponding basic item for depth up to 1.5m) 41 Metre 108.40 4444.00
127 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W./RCC pipes including bed concrete as per standard design:
a) 19.2.3 200 mm diameter 90 Metre 576.30 51867.00
128 19.9 Constructing Brick Masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top with FPS bricks class designation 75 in cement mortar 1:4 (1 cement : 4 Coarse sand), inside cement plaster 12mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of of neat cement, foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design.
19.9.1 0.91m deep with SFRC cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S:12592, total weight of cover and frame to be not less than 182Kg. fixed in cement concrete 1:2:4 mix (1cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete.(Excavation foot rests and 12mm thick cement plaster at the external surface shall be paid for separately)
19.9.1.1 with common burnt clay F.P.S.(non module) brick of class designation 7.5 14 Each 7090.00 99260.00
129 19.10 Extra depth for circuler type manholes 0.91 m internal dia ( at bottom ) beyond 0.91m to 1.67 m .
19.10.1 With common burnt clay F.P.S. (non modular) bricks of class designation 100A 6.8 Meter 4917.95 33442.00
130 19.11 Constructing Brick Masonry circular type manhole 1.22 m internal dia at bottom and 0.56m dia at top with FPS bricks class designation 75 in cement mortar 1:4 (1 cement : 4 Coarse sand), inside cement plaster 12mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of of neat cement, foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design.
19.11.1 1.68m deep with SFRC cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S:12592, total weight of cover and frame to be not less than 182Kg. fixed in cement concrete 1:2:4 mix (1cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete.(Excavation foot rests and 12mm thick cement plaster at the external surface shall be paid for separately)
19.11.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 100A 14 Each 13865.00 194110.00
131 19.12 Extra depth for circuler type manholes 1.22 m internal dia ( at bottom ) beyond 1.68m to 2.29 m .
19.12.1 With common burnt clay F.P.S. (non modular) bricks of class designation 100A 5 Meter 6283.70 31419.00
132 19.13 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :
19.13.1 2.30 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :
19.13.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 100A 12 Each 30811.30 369736.00
133 19.14 Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m :
19.14.1 With common burnt clay F.P.S. (non modular) bricks of class designation 100A 4.8 Meter 15013.20 72063.00
134 2.7 Earthwork in excavation by mecanical means ( Hydraulic excavator) / manual means over area ( exceeding 30cm. in depth,1.5 m.in width as well as 10 sq. on plan) including dressing of sides and ramming of bottoms, lift up to 1.5m, including disposal of excavated earth, lead upto 50 m. and lift upto 1.5 disposaed earth to be levelled and neatly dressed.
A 2.7.1 Ordinary rock 51.69 cum 468.00 24191.00
B 2.7.3 Hard rock (blastig prihibited) 24.07 cum 1132.00 27247.00
135 13.11 Cement plaster in course sand -12 mm cement plaster of mix:
136 19.16 Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on12mm dia steel bar conforming to IS :1786 having minimum cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protrude legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with dtand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification make to be visible even after fixing, including fixing in manholes with 30x20x15cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design. 324 Each 310.90 100732.00
137 2.10 Excavating trenches of required width for pipes, cables etc. Including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5M including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering, etc. And disposing of surplus excavated soil as directed within a lead of 50 m Hard/dense soil.
2.10.1 All kind of soil
2.10.1.3 Pipes, cables etc, exceeding 300mm dia 420 Mtr. 611.60 256872.00
138 2.13 Excavating trenches of required width for pipes, cables etc. Including excavation for sockets, depth upto 1.5M including getting out the excavated materials, returming the soil as required, in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc., stacking serviceable material for measurements And disposing of unserviceable material as directed within a lead of 50 m.
2.13.1 Ordinary rock
a) 2.13.1.3 Pipes, cables etc, exceeding 300 mm dia 165 Mtr. 1279.30 211085.00
2.13.3 Hard rock (blastig prohibited)
b) 2.13.3.3 Pipes, cables etc, exceeding 300 mm dia 55 Mtr. 1859.20 102256.00
139 19.6 Providing and laying Non pressure NP2 RCC Pipes with collars jointed with stiff mixture of cement mortar in the propoertion of 1:2 (1 cement : 2 fine sand) including testing and jointing etc complete.
140 19.3 Providing and laying cement concrete 1:5:10 ( 1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) up to hunches RCC pipes sewer/storm drainage including in bed for pipes to be laid in trenches as per standard details.
141 19.27 Constructing brick masonary road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement :4 coarse sand ) including 500x450 mm precast RCC horizontal grating with frame complete as per standard design .
19.27.1 with common burnt clay F.P.S.(non module) brick of class designation 7.5 10 Each 3743.30 37433.00
142 19.28 Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design
19.28.1 with common burnt clay F.P.S.(non module) brick of class designation 7.5 10 Each 4295.90 42959.00
143 19.21 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
19.21.1 For pipes 100 to 250 mm diameter 2 Each 375.90 752.00
144 2.27.1 Extra for every additional lift of 1.5 m or part there of in excavation /
banking excavated or stacked materials
All kinds of soil -
for RWH -Exvn depth 1.5-6.0 782.76 Cum 49.40 38668.00
145 13.11.2 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
146 For external - wall only. (Note : 230mm ( for outer wall thickness) add in every chamber. So that outer wall dimension cover in measurement).
Total external plaster 132.1 sqm 152.90 20198.00
147 13.17.1 12 mm cement plaster finished with a floating coat of neat cement of mix : 129.34 sqm 203.60 26334.00
148 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 5.04 sqm 2975.20 14995.00
149 6.1A Brick work with bricks of class designation 100A in foundations and plinth in:
6.1.14A Cement mortar 1:6 (1 cement: 6 coarse sand ) 48.30 Cum 4819.90 232801.00
150 24.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
24.1.1 All types of soil
151 24.3.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
200 mm nominal size dia 20.0 Mtr. 940.80 18816.00
152 24.4 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
24.4.3 200 mm nominal size dia 100.0 Mtr. 1088.30 108830.00
153 24.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
154 24.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
155 24.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.
156 24.8 Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction ofEngineer-in-charge 3.00 cum 1343.20 4030.00
157 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. 40 Hr. 916.800 36672.00
158 24.13 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:
159 24.15 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).
160 BSR-2022 ITEM NO. 8 Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
B NON-SCHEDULED ITEMS
161 N.S-22 Providing & fixing in position 25 mm dia lawn hydrants consisting of 25 mm dia Ball valve, GI nipple and threaded hose receiver complete as required. 16 Each 3610.00 57760.00
162 N.S-23 Supplying and laying of following size DWC pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 16098 , Part II SN8 pipe complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) including refilling the trench, sand cushioning and protective covering etc., complete as required and including testing by smoke testing method complete as required in all respect.
a) 200 mm diameter 100 Metre 1400.00 140000.00
163 N.S-24 Providing, fixing, testing, commissioning of 200 mm dia. uPVC housing pipe 6Kg/Cm sq confirming to IS 12818. including required hire and labour charges, fittings & accessories etc. all complete, for all depths,as per direction of Engineer -in-charge. 45 Mtr. 4604.00 207180.00
164 N.S-25 Providing, fixing, testing, commissioning 200 mm dia. uPVC Slotted pipe 6Kg/Cm sq confirming to IS 12818. including required hire and labour charges, fittings & accessories etc. all complete, for all depths,as per direction of Engineer -in-charge. 40 Mtr. 5576.00 223040.00
165 (Derived rate Supplying ,delivery & installation of vertical wet type submersible pump suitable for following size bore well confirming to IS :8034 with standard MOC for noted cum/hr against noted total head of water column.............., 7.5 H.P app. motor having discharging capacity 19 cum/hour against a head of 120 metres. 1 Mtr. 60706.50 60707.00
PART -4 : FIRE FIGHTING SYSTEM
FIRE FIGHTING PUMP
166 BSR-2022 ITEM NO-1 Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :
(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.
(b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
(d) Suitable cement concrete foundation duly plastered with anti vibration pads.
167 BSR-2022 ITEM NO- 2 Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)
Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.
Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.
Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.
M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.
Suitable cement concrete foundation duly plastered and with anti vibration pads.
168 BSR-2022 ITEM NO- 3 Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)
Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.
Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325.
M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
Suitable cement concrete foundation duly plastered and with anti vibration pads.
169 BSR-2022 ITEM NO- 4 Supplying, installation, testing and commissioning of electric driven terrace pump with Electrical Panel suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)
(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520
b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.
(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.
170 BSR-2022 ITEM NO-5 CONTROL PANELS
5.1 Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :
250A, 50kA 4 Pole MCCB, Ics=100% Icu Rating
Digital Voltmeter 0-500V with selector switch
Ammeter (0-250 A) with selector swtich & CTs etc.
LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps
Set of Copper Bus Bar 300Amps
( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)
125 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets
63 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. - 2 sets
DIESEL ENGINE CONTROL
Control for diesel engine comprising -
Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode
Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication
Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter
All standard relays and accessories for automatic operation of diesel engine
System Controller
Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification 1.00 Each 248187.00 248187.00
171 BSR-2022 ITEM NO-7 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
a 7.9 200 mm dia (wall thickness 6.3 mm) 25 M 2692.00 67300.00
172 BSR-2022 ITEM NO-9 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
9.2 Single headed Stainless steel 3.00 set 5722.00 17166.00
173 BSR-2022 ITEM NO-10 Supplying and fixing single headed external yard hydrant valve with 1 no 63 mm dia instantaneous FM Gunmetal/Stainless coupling and cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
10.2 Single headed Stainless steel 10.00 set 5722.00 57220.00
174 BSR-2022 ITEM NO-11 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
175 BSR-2022 ITEM NO-14 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
176 N.S-27 Supplying and Fixing of C.I. flanged Foot valve with strainer complete in all respects, as required.
177 BSR-2022 ITEM NO-20 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. 1.00 Set 17707.00 17707.00
178 BSR-2022 ITEM NO-22 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. 2.00 Each 1442.00 2884.00
179 N.S-28 Supplying & Fixing of Gunmetal Bourdon Type pressure gauge with gunmetal isolation ball valve tapping and connecting pipe and nipple for pump sets, complete in all respects, as per Technical Specifications and Drawings, suitable for working pressure of 250 PSI. Cost shall be inclusive of providing any short pieces, nipples, elbows etc as required. 5.00 Each 772.00 3860.00
180 N.S-29 Supplying and fixing of Air release valve 25 NB, Gunmetal Cap release Type - Valve with ball valve & accessories. 5.00 Each 820.00 4100.00
181 BSR-22 27.0 Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.
182 BSR-2022 ITEM NO-13 Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. 13.00 Each 1236.00 16068.00
183 BSR-2022 ITEM NO-15 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.
184 BSR-2022 ITEM NO-16 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : 20.00 Each 4445.00 88900.00
16.2 Stainless Steel (Grade 304)
185 BSR-2022 ITEM NO-17 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.
20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585
20 mm nominal internal dia gun metal globe valve & nozzle.
Drum and brackets for fixing the equipmets on wall.
Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 3.00 Each 7920.00 23760.00
186 BSR-2022 ITEM NO-18 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :
18.2 Stainless Steel (Grade 304) 13.00 Each 1631.00 21203.00
187 N.S-30 Providing & Fixing weather proof lockable cabinet of size not less than 0.75x0.6x0.25 mtr made out of 16 gauge MS powder coated sheet of fully welded construction having central opening and 3 mm thick glazed glass doors (Two nos.) suitably marked on the outside with the letters "FIRE HOSE" including necessary locking arrangement and shall be painted with one coat of primer and two coats of synthetic enamel paint of approved shade complete as required. 13.00 Each 5337.00 69381.00
188 BSR-2022 ITEM NO-19 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
a 19.3 3 way - 150 mm dia M.S. Pipe 1.00 Each 9071.00 9071.00
189 AR ABC Powder Type (stored Pressure) Fire Extinguisher, 4kg. Capacity, ISI mark (IS:15683), squeeze grip valve, operating temperature (+5) degree Celcuis to (+55) degree Celcuis for class 3A Type of Fire Filed with MAP ABC Powder, Complete in all respect 12.00 Each 2295.00 27540.00
190 AR CO2 Type Fire Extinguisher , 4.5 Kg Capacity, ISI Mark (IS:15683) squeez grip valve, operating temperature (-30) degree Cel to (55) deg cel. For Class 13B type of Fire Fitted with 1 Mt. Hose & PVC Horn, Complete in all respect. 12.00 Each 5995.00 71940.00
191 AR Animal Resource 32 bit microprocessor based Intelligent Addressable Fire Alarm Control panel with 4 loops with battery back up. The panel would be modular, decentralized, with The panel shall be consisting with minimum 240 character LCD display and for networking. The Panel would be able to record atleast 60,000 events history. Each loop would be capable to have atleast 250 addressable detectors and addressable devices with up to 3.5km loop length.Make: Schrack Seconet (Vds approved) 1.00 Each 300000.00 300000.00
192 AR Animal Resource 1 KVA LINE INTERACTIVE UPS WITH 30 MIN BATTERY BACK UP 1.00 Each 30000.00 30000.00
193 AR Animal Resource Supplying and fixing Intelligent Addressable type multicriteria detector with base for use as heat or smoke or combined both with automatic electronic addressing, microprocessor type with builtin integrated short circuit isolator including testing, commissiong etc as reqd. 100.00 Each 3200.00 320000.00
194 AR Animal Resource Supplying and fixing Intelligent Addressable type Heat detector with base with automatic electronic addressing, microprocessor type with builtin integrated short circuit isolator including testing, commissiong etc as reqd. 1.00 Each 2750.00 2750.00
195 AR Animal Resource Sypplying and fixing Intelligent Addressable Manual Call Point having inbuilt short circuit isolator i/c testing and commissiong etc as reqd. 8.00 Each 3500.00 28000.00
196 AR Animal Resource Addressable sounder with interface module, power supply for suonder and programmable by software having integrated short circuit isolator & having operating temperature -10⁰C to + 55⁰C 8.00 Each 3750.00 30000.00
197 AR Animal Resource Analogue Addressable Control module with IP66 casing containing four relay outputs, each containing a potential-free DPDT contact with a fail-safe and in-built short circuit isolator The ambient temperature range shall be -20C to +60C. 4.00 Each 8050.00 32200.00
198 AR Animal Resource Supplying and Laying of 2X1.5 Sq.mm.marked copper FRLS wire with 20mm dia.PVC conduit pipe ISI marked, Complete with all fittings viz. Tees, Bends, Junction Boxes, Clamps/ Supports etc. 650.00 Mtr 135.00 87750.00
199 AR Animal Resource Duel LED Response Indicator (LOCAL) 20.00 Each 175.00 3500.00
AR Animal Resource CABLE & WIRING ACCESSORIES
200 AR Animal Resource 4"/4" JB for mounting of detectors & other accessories with necessary fittings 40.00 Each 135.00 5400.00
201 AR Animal Resource Supplying and fixing Outdoor Electronic Sounder with 4 distinct tone including 40W Speaker with required accessories as reqd. 8.00 Each 4150.00 33200.00
202 DSR-25 28.3.1 Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required. 1.00 set 132115.00 132115.00
203 DSR-25 28.3.2 Supplying, installation, testing & commissioning of 1.5W/3W/6W ceiling speaker complete as required. 60.00 Each 1025.00 61500.00
204 DSR-25 28.3.4 Supplying, installation, testing & commissioning of 1.5W/3W in ABS enclosure ceiling/wall speaker complete as required. 12.00 Each 2555.00 30660.00
205 DSR-25 28.2.15 Supplying, installation, testing & commissioning of horn cum strobe complete as required. 3.00 Each 3682.00 11046.00
206 DSR-25 28.5.3 Supplying and drawing of cable fire retardant PVC insulated copper conductor cable in existing surafce/ recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.
28.5.3.1 Speaker cable single pair, 2 core 1.5 sqmm 1125.00 mtr 61.00 68625.00
PART- 5 - ELECTRICAL WORKS
207 1.3 Wiring for light/fan point/ exhaust fan point/ call bell point with 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5sqmm FRLS PVC insulated copper conductor single core cable etc as required.
208 1.5 Wiring for light /power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 2250.0 Mtr 309.0 695250.00
209 1.7 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit (included ) as required
b 1.7.11 4 X 10 sq. mm + 1 X 6 sq. mm earth wire 200.0 Mtr 660.0 132000.00
210 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
1.24.8 Bell Push 4.0 Each 122.0 488.00
211 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. (GI box thickness shall be 1.6mm)
a 1.27.1 1 or 2 Module (75mmX75mm) 4.0 Each 234.0 936.00
212 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 25.0 Each 34.0 850.00
213 1.56 Supplying and fixing suitable size GI box with rnodular plate and cover in front on surface or in recess, including providing and fixing 3 nos. 5 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required. 54.0 Each 778.0 42012.00
214 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. 96.0 Each 414.0 39744.00
215 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 62.0 Each 531.0 32922.00
216 1.53 Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. 69.0 Each 683.0 47127.00
217 2.19 Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. 8.0 Each 1513.0 12104.00
218 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. 40.00 Each 64.00 2560.00
219 1.34 Supplying and fixing brass batten/ angle holder including connection etc. as required. 21.00 Each 80.00 1680.00
220 1.36 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. 4.00 Each 88.00 352.00
221 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required.
222 5.7 Supplying and fixing recess mounted following types LED downlighter with minimum efficacy 100 Im/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.
d AR Telhara Supply, fixing, testing and commissioning of Pendent 12 W COB light Eq as per Engineer In-charge. 300.00 Each 6321.00 1896300.00
e AR Telhara Supply, fixing, testing and commissioning of Track light 10 Watt. 80.00 Each 3741.00 299280.00
223 5.9 Supplying and fixing recess mounted 36 watt LED flat panel (2' X 2') with minimum efficacy 100 lm/w which provides soft light and glare free symmetrical illumination suitable for armstrong/grid ceiling and integrated electronic driver etc directly on false ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 30.00 Each 2663.00 79890.00
224 5.4 Supplying and fixing replaceable compact commercial batten suitable for Single T8 LED tube complete with 20 watt LED polycarbonate T8 tube with built in driver etc. directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 10.00 Each 834.00 8340.00
225 8.19 Supply and installation of 400 mm, 230 V A.C. wall/cabin fan including fixing the bracket, making connection, testing, commissioning etc as required. 15.00 Each 3670.00 55050.00
226 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 210 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. 55.00 Each 2482.00 136510.00
227 1.25 Supply and fixing of stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 55.00 Each 358.00 19690.00
228 8.18 Supply and fixing of following sweep/ sizes PVC/ABS square body Exhaust Fan with automatic openable louvre shutter in existing opening including making connection, testing etc as required.
229 5.10 Supplying and fixing 10/12 watt LED type Bulk-head luminaire with minimum efficacy 100 lm/w in comprising of pressure die cast housing, acrylic diffuser,lP 65 protection and complete u.,ith integrated electronic driver etc directly on wall/ceiling including connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable etc as required. 4.00 Each 1275.00 5100.00
230 5.15 Supplying and fixing fotrlowing types LED Flood light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on poleibuilding including connection earthing the body etc as required.
231 2.9 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
232 2.12 Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2.12.1 6A to 32A Single Pole 125.00 Each 237.00 29625.00
233 2.13 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for lnductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
234 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required 24.00 Each 13.00 312.00
235 2.17 Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
236 AR Animal Resource Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
150 mm width X 50 mm depth X 1.6 mm thickness 300 mtr 268.00 80400.00
237 3.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 4.00 Each 6323.00 25292.00
238 3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc. as required. 3.00 Each 16675.00 50025.00
239 3.9 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm). 175.00 mtr 133.00 23275.00
240 3.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 200.00 mtr 195.00 39000.00
241 4.1 Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, copper tube, having singte prong on top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required. 2.00 Each 1056.00 2112.00
242 4.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) 125.00 mtr 102.00 12750.00
243 4.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) 50.00 mtr 145.00 7250.00
244 4.11 Providing and fixing testing joint, made of 20 mm X 3 mm thick copper strip, 125 mm long, with 4 nos. of tinned brass bolts, nuts, chuk nuts and spring washers etc. complete as required. 2.00 Each 274.00 548.00
245 4.13 Providing and laying copper tape 32 mm X 6 mm from earth electrode directly in ground as required. 50.00 mtr 1530.00 76500.00
246 7.4 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
7.4.2 Above 35 sq. mm and upto 70 sq. mm (Clamped with 25 x 3 mm MS flat clamp) 50.0 mtr 109.00 5450.00
247 7.3 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required but excluding sand cushioning and protective covering.
7.3.3 Above 95 sq. mm and upto 185 sq. mm 150.0 mtr 143.00 21450.00
248 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
1.24.6 Telephone socket 15.00 Each 131.00 1965.00
249 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required
250 1.16 Supplying and drawing .5 mm dia FRLS pvc insulated annealed copper conductor unarmoured telephone wire in exisitng pvc conduit
251 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required
252 AR Animal Resource CCTV Network Camera Dome 4 MP Image Sensor - 1/3" Progressive Scan CMOS, Shutter Speed - 1/3s to 1/10,000 s, Lens - 2.7mm, 4mm, 6mm @ F2.0angle of view: 106°(2.7mm), 83°(4mm), 55.4°(6mm), Day &Night - IR cut filter with auto switch, White Balance - Automatic/Manual, Video Compression - H.264/MJPEG/H.264+, Max. Resolution - 2688×1520, Communication Interface - 1 RJ45 10M/100M Ethernet port, Base T. 15.00 Each 6800.00 102000.00
253 AR Animal Resource CCTV Network Camera Bullet 4 MP Image Sensor - 1/3" Progressive Scan CMOS, Shutter Speed - 1/3s to 1/10,000 s, Lens - 2.7mm, 4mm, 6mm @ F2.0angle of view: 106°(2.7mm), 83°(4mm), 55.4°(6mm), Day &Night - IR cut filter with auto switch, White Balance - Automatic/Manual, Video Compression - H.264 /MJPEG /H.264+, Max. Resolution - 2688×1520, Communication Interface - 1 RJ45 10M/100M Ethernet port, Base T . 15.00 Each 7100.00 106500.00
254 AR Animal Resource Supply / Installation and Commissioning of Network Video Recorder,H.26+/H.265/H.264/H.264+ video formats,Connectable to the third-party network cameras,Up to Min 32 IP cameras can be connected,Recording at up to Min 8 MP resolution,Supports live view, storage, and playback of the connected camera at up to Min 8 MP resolution,HDMI and VGA independent outputs ,HDMI Video output at up to 4K (3840 × 2160) resolution ,4 SATA interfaces connectable for recording and backup ,2 self-adaptive 10/100/1000 Mbps network interface ,Centralized management of IP cameras, including configuration, information import/export, real-time information display, two-way audio, upgrade, etc.,Connectable to smart IP cameras and the recording, playing back, and backing up of VCA alarms can be realized,VCA detection alarm is supported Instant playback for assigned channel during multi-channel display mode,Smart search for the selected area in the video; and smart playback to improve the playback efficiency,Connect for easy network management 1.00 Each 42300.00 42300.00
255 AR Animal Resource Supply Installation Testing & Commissioning of IP Video Storage device shall be a Min 30 days recording,Min RAID-3 protected, all-in-one recording for network surveillance systems It shall be designed for high speed, high capacity Network video storage and high performance play back applications.The video storage array shall have Min 5 internal HDDs (4 x 10TB) Min 4 TB. The storage array shall provide an audible alarm to notify the user in the event of a failure. The system should be such that the vedio recording from camera should be done directly on storage array and directions of Engineer-in-charge. LED indicators Features trayless hard drive insertion Dissipates heat efficiently with aluminum housing. Software configuration if any.Complete in all respects. 4.00 Each 18000.00 72000.00
256 DSR-25 42.1 Supplying Installation Testing Commissioning of Central Control Server System comprising of Intel® Xeon® CPU E5-2640 x64 (or better compatible with dual and quad core processors, Windows 11 (Professional, Enterprise, Ultimate, 64 bit), Windows Server 2013 R2 (Standard, Enterprise, 64 bit) 16 GB or more, Video card and monitor capable of displaying at 1024 x 768 resolution or better, Latest Microsoft Licence Version Operating System Loaded with MS OFFICE 2019 Professional, Word, EXCEL, Power Point, Outlook Express, Microsoft Team official version lifetime licences suitable for running BMS software complete etc. as required. 1.00 Each 186434.00 186434.00
257 AR (ICCC Bihar Sharif) LFD Monitor ,42" Professional Full HD LED Monitor with Wall Mount 2.00 Each 54900.00 109800.00
258 1.58 Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed PVC conduit as required.
259 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required
260 AR Resham Smart-UPS On-Line, 5.4 kW / 6 kVA with 1 hour Backup12 V 65 AH SMF Battery UPS Toplogy Double Conversion On-Line, Power Rating (VA / Watts) 5400Watts/6000VA, Form Factor Rack/Tower Convertible; Output Power Capacity 5400 Watts/6000 VA, Max Configurable Power 5400Watts/6000VA, Nominal Output Voltage 230V, Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage, Efficiency at Full Load 94.00%, Output Voltage Distortion Less than 3%,Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz,Crest Factor 03:01,Waveform Type Sine Wave, Output Connections (1)*Hard Wire 3-wire (8)*(H N + G) IEC 320 C13(8),Bypass Built-in Bypass, Output Short Circuit Protection Yes,Parallel Redundancy (Option) 1 + 1, Nominal Input Voltage 230V,Input Power Factor>0.98,Input Frequency 40-70Hz,Input Connections Terminal Block, Protection Thermal Circuit Breaker (250VAC/20A), Input voltage range for main operations full load 160 - 285V, Input voltage range for mains operation half load 160-285V, High Voltage withstand Capability 420 VAC, Green Mode Range 210-250 VAC (230 V), Battery Type Mintenance - free sealed Lead-Acid battery with suspended, electrolyte. 12V 65 Ah SMF battery for 60 Min Battery Back up. 1.0 Each 284500.00 284500.00
Solar with Net Meter to be Provided by the Contractor
261 AR Multi Model Design, Supply, Installation, Testing and Commissioning of 30 KW Solar System with all below items. (Approved OEM-Heron India Pvt ltd / Ojas Solar Energy/ Solar Power Tech) 30 Hp 61060 1831800.00
Solar PV Panel 300 Watts Multi Crystalline SPV Module (100 sets 300W PV Module for 30KW) Nominal Power at STC, Pmax W 200wp Power tolerance at STC (min/ max) % 200+/- 3 Voltage at Pmax, Vmp V 30VDC Current at Pmax, Imp A 8.26A Open circuit voltage, Voc V 36VDC Short Circuit Current, Isc A 8.78A Norninal Operating Solar Cell temperature (NOCT) Deg C 47Deg C +/-2 Maximum System voltage V DC 1000 Temp. Coefficient of Pmax %/ K -0.39% °C Temp. Coefficient of Voc %/ K -0.31% °C Temp. Coefficient of Isc %/ K -0.05% °C IP protection Level IP65 Absolute Maximum Ratings -40°C to 85° C Operating Temperature Deg C (-40 to +85) Storage Temperature Deg C (-40 to +85) Mechanical Parameters L x W xH 1662 x 992 x42 (PV Module Make-Lubi / Canadian Solar/ Waree).
Solar PCU 30 Kva 180 MPPT Base Power conditioning unit will comply the following requirements. • 415V AC + 5% 50Hz, 3 Phase • Overload capacity – 150% for 60sec. • Output wave shape: sine wave with <3% total harmonic distortion (THD). • Adjust the Voltage and Frequency Levels to suit the Grid, Devices to connect with existing system.
Module Mounting Structure & Stand The array structure shall be made of hot dip galvanized MS angles of size not less than 50mm x 50mm x 6mm size. The minimum thickness of galvanized shall be at least 70 microns. All nuts & bolts shall be made of good quality steel. The work should be completed with supply, fitting fixing of clamps, saddles, nut & bolts etc. While quoting the rate, the bidder may mention the design & type of structure offered. All nuts & bolts shall be made of very good quality steel. The structure shall be designed to allow easy replacement of any module and shall be in line with site requirements. The structure shall be designed for simple mechanical and electrical installation. It shall support SPV modules at a given orientation, absorb and transfer the mechanical loads to the ground properly. There shall be no requirement of welding or complex machinery at site. The array structure shall be so designed that it will occupy minimum space without sacrificing the output from SPV panels & shall withstand heavy winds. The supplier / manufacturer shall specify installation details of the PV modules and the support structures with appropriate diagrams and drawings
1C X 4 Sq. mm PVC Cu cable All the cables shall be supplied conforming to IS 694 & shall be of 650 V/ 1.1 kV grade as per requirement. Only FRLS PVC copper cables shall be used. The size of the cables between array interconnections, array to junction boxes, junction boxes to DCDB, DCDB to PCU etc shall be so selected to keep the voltage drop and losses to the minimum. Bidders are required to mention each size of cables used and should consider their resistance / impedance in the design optimization. Such calculation should be submitted along with the bid. The contractor shall supply all installation accessories, which are required to install and successfully commission the power plant.
1C X 25 Sq. mm PVC Cu cable All the cables shall be supplied conforming to IS 694 & shall be as per requirement. Only FRLS PVC copper cables shall be used. The size of the cables between array interconnections, array to junction boxes, junction boxes to DCDB, DCDB to PCU etc shall be so selected to keep the voltage drop and losses to the minimum. Bidders are required to mention each size of cables used and should consider their resistance / impedance in the design optimization. Such calculation should be submitted along with the bid. The contractor shall supply all installation accessories, which are required to install and successfully commission the power plant.
3.5C x 25 Sq. mm PVC Cu cable All the cables shall be supplied conforming to IS 694 & shall be as per requirement. Only FRLS PVC copper cables shall be used. The size of the cables between array interconnections, array to junction boxes, junction boxes to DCDB, DCDB to PCU etc shall be so selected to keep the voltage drop and losses to the minimum. Bidders are required to mention each size of cables used and should consider their resistance / impedance in the design optimization. Such calculation should be submitted along with the bid. The contractor shall supply all installation accessories, which are required to install and successfully commission the power plant.
Array Junction Box as required The junction boxes shall have suitable arrangement for the following: • Combine groups of modules into independent charging sub-arrays that shall be wired to the controller. • Provide arrangement for disconnection for each of the groups. • Provide a test point for each sub-group for quick fault location. • To provide group array isolation. • The rating of the JB’s shall be suitable with adequate safety factor to inter connect the Solar PV array. • Metal oxide varistors shall be provided inside the Array Junction Boxes
Earthing Kit The array structure of the PV yard shall be grounded properly using adequate number of earthing kits. All metal casing / shielding of the plant shall be thoroughly grounded to ensure safety of the power plant. Earthing shall be in line with IE rules. The earthing & grounding shall also meet the requirement of PV module/cell manufacturer.
Surge Protector The DIN channel mountable pluggable surge protection shall be installed in a network configuration, consisting of a single block MOV (Metal Oxide Varistor) based surge arrester having nominal surge handling capacity of 15 KA 8/20 µs & maximum surge handling capacity of 30 KA 8/20 µs to provide protection between (L+, L-, earth). All surge arresters in these network configurations shall be of same manufacturer. The Protection unit shall be based on Single block High Capacity Metal Oxide Varistors (MOV), capable of handling 15 KA 8/20 μs surges and shall be able to give an indication in the event module failure and shall be pluggable to facilitate the on site replacement without disturbing the lines. One extra set of replacement protective device shall be furnished to the job site. Protection shall be manufactured to withstand a maximum continuous operating voltage of not less than 115% of normal RMS system voltage. A changover switch shall be provided if required at time of complition to connect solar supply to main supply.
Lightning & Over Voltage Protection
B - EXTERNAL ELECTRICAL
SUB HEAD 4- EXTERNAL LIGHTING
262 8.22 Supply and erection of 6 metre height Hot-dip galvanized octagonal street Iight pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, made of 3 mm thick sheet along with base plate of size 220 X 220 X 12 mm , small door opening for junction box mounting including 6A 'C' series SP MCB, connector, and suitable size foundation bolts with template as required.(but without pole foundation)
263 8.24 Supply and erection of 8 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 155 mm, made of 3 mm thick sheet along with base plate of size 260 X 260 X 16 mm , small door opening for junction box mounting with MCB & connector, cement concrete of 1:3:6 including excavation, refilling and suitable size foundation bolts with template and all complete job as required. (but without pole foundation)
264 5.14 Supplying and fixing following type LED type street light with die cast aluminium housing for ingress protection of IP65 and complete with all accessories etc, on pole/building including connection with FR PVC insulated copper conductor cable and earthing the body etc. as required.
265 5.13 Supplying and fixing post top / gate light (width 250/300 mm) made up of high grade unbreakable polycarbonate material suitable for upto 20 watt LED lamp including connections and earthing the body etc as required. ( But without lamp) 4.00 Each 1399.00 5596.00
SUB HEAD 6- CABLE WORKS
CABLE TERMINATION
266 DSR-25 11.1 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
267 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required.
268 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required.
269 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 4.0 Each 6536.00 26144.00
270 2.7 Providing and fixing following capacity four pole ON-load panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required.
271 2.5 Providing and fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections, earthing the body etc. as required.
a 2.5.3 200amps, 415 V heavy duty three phase with neutral busbar chamber 1.0 Each 10550.00 10550.00
b 2.5.6 500amps, 415 V heavy duty three phase with neutral busbar chamber 1.0 Each 26329.00 26329.00
272 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required.
273 8.11 Suppling and fixing wall/floor mounted cubical panel board, fabricated with 18 gauge iron sheet, suitable for panel mounted switch disconnector, including bus bar chamber, insulator and painting etc as required. (but without bus bar copper strip) 100.0 Each 1809.00 180900.00
The switchboard shall be complete with all inter connections, risers, internal wiring, labels etc complete as required
274 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required.
275 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 1.00 Each 6536.00 6536.00
276 Providing and fixing following capacity four pole ON-load panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required.
277 2.5 Providing and fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections, earthing the body etc. as required.
2.5.3 200amps, 415 V heavy duty three phase with neutral busbar chamber 1.00 Each 10550.00 10550.00
278 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required.
279 8.11 Suppling and fixing wall/floor mounted cubical panel board, fabricated with 18 gauge iron sheet, suitable for panel mounted switch disconnector, including bus bar chamber, insulator and painting etc as required. (but without bus bar copper strip) 100.00 sft 1809.00 180900.00
280 2.20 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel at least 2 mm thick, vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 13.0 Each 214.00 2782.00
281 DSR-25 Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete.
282 AR BCD Supplying, installation, testing and Commissioning of passenger Car Type Elevator (lifts) 13/884 Kg-1 MPS (for Four stop, G+3 One No. lift) with fan, fully automatic state of the art technologies, make from World Fame manufactures, all complete job .( Make- ONLY THYSSON KRUPP/SCHINDLER /KONE /MITSUBISI/OTIS /JOHNSON. Note:- Half portion of the door is glass fittings. Work including 3rd Party and Electrical Inspection also. 1.00 Each 2177100.00 2177100.00
PRODUCT : GeN2-Nova DETAILS : GeN2-Nova VXN CAPACITY (kgs) : 884 Kg, 13 persons. SPEED (mps) : 1 mps RISE (m) : 16.5 m STOPS : 4 Stops With (all opening on the same side) CONTROLLER TYPE :ACD3-MR DRIVE :VF Regenerative (Closed Loop) POWER SUPPLY :400/415 Volts (3 Phase AC) OPERATION : Full collective operation CAR GROUP : One car (simplex) MACHINE :PM Gearless (Located above shaft) TRACTION MEDIA :Flat Coated Steel Belt CAR FINISH : Rear Mid Panel = Stainless Steel #4(Hairline) Rear Corner Panels = Stainless Steel #4(Hairline) Side Panels = Stainless Steel #4(Hairline) Front Panels = Stainless Steel #4(Hairline) FALSE CEILING TYPE :CD-41 FLASE CEILING FINISH : Stainless Steel #4(Hairline) VENTILLATION : Cross flow fan HAND RAILS : Stainless Steel Mirror Finish Handrails on rear car panels FLOORING :Vinyl Tiles CAR DOOR FINISH : Stainless Steel #4(Hairline) LANDING DOORS FINISH : Stainless Steel #4(Hairline) FIRE RATED DOORS : Fire rating-60mins PIT DEPTH : 1350 OVERHEAD 4500 HOISTWAY DIMENSIONS (W x D – mm) :2300 mm W x 1950 mm D CAR DIMENSIONS (W x D x H - mm) :1600 mm W x 1350 mm D x 2200 mm D CAR & HOISTWAY DOOR TYPE :Central opening (CO) doors DOOR OPENING (W x H - mm) :900 mm W x 2000 mm H DOOR OPERATOR :DC Door Operator COP : COP for stops <= 12 (950mm) in Stainless Steel #4(Hairline) CAR POSITION INDICATOR :Monochrome LCD-Blue Background & White font HALL FIXTURES :O2000 HALL FIXTURE FACE PLATE :Stainless Steel #4(Hairline) HALL BUTTON ARRANGEMENT :Hall Button with HPI.
5-Years Lift Maintenance
First Year (Free) 1.00 Each 0.00 0.00
Second Year @ 5% of SITC 1.00 Each 108855.00 108855.00
Third Year @ 6% of SITC 1.00 Each 130626.00 130626.00
Forth Year @ 7% of SITC 1.00 Each 152397.00 152397.00
Fifth Year @ 8% of SITC 1.00 Each 174168.00 174168.00
283 5.33.1 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cementcontent as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and including retard setting of concrete, improve workability without impairing strength and admixtures in recommended proportions as per IS: 9103 to accelerate, reinforcement,durability as per direction of Engineer-in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum.Excess or less cement used as per design mix is payable or recoverable separately.All works up to Plinth level. 112.21 cum 5063.40 568164.00
284 5.33.2 All works above Plinth level up to floor five level. 46.15 cum 5863.20 270587.00
285 16.53 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable lengt ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) 101.00 metre 272.60 27533.00
286 9.21 Providing and fixing ISI marked flush door shuttersconfirming to IS: 2202(Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 2.52 sqm 1775.30 4474.00
287 9.127.2 Providing & Fixing decorative high Pressure Laminateed sheet of plain/ wood grains in gloss/matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality confirming to IS:2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick. 5.54 Sqm. 669.00 3709.00
288 9.147D.1 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multichambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of as required. length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of as required. size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable
Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) 5.40 Sqm. 7074.90 38204.00
289 2.29 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m.
2.29.1 All kinds of soil 2389.00 100sqm 1355.40 32380.51
290 16.78 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.
16.78.1 With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 229.50 Cum. 1310.40 300737.00
291 16.80 Construction of dry lean cement concrete sub base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per specifications, cement content not to be less than 150 Kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc. complete as per direction of Engineer- in- charge. 101.25 Cum. 2054.30 207998.00
292 16.42 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to as required. slope and camber in panels as required. including consolidation finishing and tamping complete. 166.65 Cum. 4649.00 774756.00
293 16.69 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the as required. line, level and curvature, jointed with cement mortar 1:3 (1cement:3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever as required. complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 13.78 Cum. 7998.80 110223.00
294 13.82B Finishing with Epoxy paint (two or more coats) at all locations prepared surfaces.
13.82B.2 On concrete work 236.25 Sqm 122.70 28988.00
295 16.91 Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of as required. strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in as required. colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per as required. size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer- in-Charge.
A 16.91.1 60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern 112.50 Sqm. 714.00 80325.00
296 16.63 Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete and as per direction of Engineer-in-charge. 72.00 Sqm. 427.70 30794.00
297 16.88 Providing and laying matt finished vitrified tile of size 100x100x16mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in out door floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer-in-Charge. 460.00 Sqm. 1611.50 741290.00
298 16.87 Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of as required. size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer- in-Charge.
16.87.1 With granite stone of colour black, cherry/ruby red of area less than 0.50 sqm. 195.00 Sqm. 3543.90 691061.00
299 6.1A Brick work with bricks of class designation 100A in foundation and plinth in:
6.1.14A cement mortar 1:6 (1 cement : 6 coarse sand) 15.43 cum 4819.90 74371.00
300 11.30 40 mm thick fine dressed stone flooring over 20 mm (average) thick base with joint finished flush: base 1:5 ( 1 cement : 5 coarse sand) with joints 3mm thick,side buttered with cement motar 1:2(1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar.
11.30.1 Red sand stone 99.00 sqm 849.20 84071.00
301 2.2 Banking excavated earth in layers not exceeding 20 cm.In depth, breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up ; in embankments for roads, flood banks, marginal banks, and guide banks etc, lead upto 50 m and lift upto 1.5 m.
2.2.1 All kinds of soil 53.11 Cum. 386.60 20532.00
302 23.1 Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). 100.00 Cum 44.70 4470.00
303 23.2 Supplying and stacking of good earth at site including royalty but excluding carriage (earth measured in stacks will be reduced by 20% for payment). 100.00 cum 143.50 14350.00
304 23.3 Supplying and stacking sludge at site including royalty and carriage (sludge measured in stacks will be reduced by 8% for payment). 100.00 cum 282.60 28260.00
305 23.4.2 Supplying and stacking at site dump manure from approved source, excluding carriage (manure measured in stacks will be reduced by 8% for payment). Screened through sieve of I.S. Destination 16 mm. 100.00 cum 299.40 29940.00
306 23.5 Rough dressing the trenched ground including breaking clods 1000.00 100 sqm 85.90 859.00
307 23.6 Uprooting weeds trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. 1000.00 100 sqm 283.20 2832.00
308 23.7 Fine dressing the ground 1000.00 100 sqm 208.80 2088.00
309 23.8 Spreading of sludge, dump manure or/and good earth in required thickness (cost of sludge, dump manure or/and good earth to be pais separately). 300.00 cum 30.10 9030.00
310 23.9 mixing earth and sludge or manure in proportion specified or directed. 1500.00 Cum 20.90 31350.00
23.10.3 Grassing with 'Doob' grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing including supplying good earth if needed. In rows 5 cm apart in either direction. 1000.00 100 sqm 1027.40 10274.00
311 23.14 Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :
A 23.14.1 Holes 1.2m dia, &1.2m deep 75.00 Each 536.50 40238.00
B 23.14.2 Holes 60cm dia, &60cm deep 50.00 Each 69.30 3465.00
312 DSR 2.28/2025 Preparation of mounds of various size and shape by available excavated /supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.
Circular mounds
Irrgular Mound 50.00 Cum 696.20 34810.00
313 DSR 2.54/2025 Anti termite treatment by digging pits 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termiteinfection chemicals used Chlorpyriphos 20% EC in ratio 1%concentration and as per direction of officer-in-charge. 800.00 Nos 70.25 56200.00
314 DSR 2.13/2025 Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure orextra earth to be paid for separately) 60.00 Cum 339.85 20391.00
315 DSR 4.83/2025 Providing and Displaying plants Vinca different colour 6 to 8 well developed branch in full bloom stacked with green painted Bamboo stick in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. 75.00 Each 59.20 4440.00
316 10.1.25 DSR 2025 Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge.Petunia hybrid. 260.00 Each 6.14 1596.00
317 4.28 DSR 2025 Providing and Displaying plants Dianthus dwarf specimen 6-8 plants in a pot with fresh & healthy foliage in full bloom well developed in 35 cm Earthen Tray/Nand as per direction of the officer-in-charge. 60.00 Each 382.50 22950.00
318 10.1.18 DSR 2025 Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge.Gerbera hybrid. 250.00 Each 22.27 5568.00
319 10.2.2 DSR 2025 Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge.Celosia argentea. 250.00 Each 4.81 1203.00
320 6.3 DSR 2025 Providing and Displaying of Asparagus marrie plant, well developed 15 to 20 leaves, full of branches and foliage in 25 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. 300.00 Each 60.20 18060.00
321 6.2 DSR 2025 Providing and Displaying of Alternanthera species plant of height 15 cm to 20 cm, full of branches and foliage in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. 300.00 Each 21.65 6495.00
322 6.25 DSR 2025 Providing and Displaying of Syngonium (Butterfly) variegated plant with 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. 300.00 Each 33.70 10110.00
323 6.31 DSR 2025 Providing and Displaying of Zebrina Trades cantia plant having in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. 300.00 Each 21.65 6495.00
324 DSR7.4/2025 Supply and stacking of Alstonia scholaris plant of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge. 100.00 Nos 71.00 7100.00
325 DSR7.18/2025 Supply and stacking of Cassia javanica plant of height 120-150 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 100.00 Nos 93.90 9390.00
326 DSR7.44/2025 Supply and stacking of Foxtail palm plant of ht. 240-270 cm bottom girth 35-40 cm well developed in big size HDPE bags as per direction of the officer-in-charge. 15.00 Nos 704.20 10563.00
327 DSR7.48/2025 Supply and stacking of Jacaranda mimosifolia plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 125.00 Nos 65.00 8125.00
328 DSR7.70/2025 Supply and stacking of Plumeria alba of height 165-180 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. 30.00 Nos 244.65 7340.00
329 DSR7.68/2025 Supply and stacking of Plumeria acutifolia of height 150-165 cm. with 3- 4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. 40.00 Nos 216.65 8666.00
SHRUBS & HEDGES
330 DSR6.2/2025 Providing and Displaying of Alternanthera species plant of height 15 cm to 20 cm, full of branches and foliage in 15 cm size of Earthen Pot / PlasticPot & as per direction of the officer-in-charge. 300.00 Nos 21.65 6495.00
331 DSR6.12/2025 Providing and Displaying of Duranta Golden plant, having ht.15 to 20 cm bushty shape plant with fresh and healthy leaves in 20 cm size of EarthenPot / Plastic Pot & as per direction of the officer-in-charge.. 300.00 Nos 22.85 6855.00
332 DSR6.20/2025 Providing and Displaying of Ophiopogon jaburan (variegated ) plant, full of variegated leaves in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. 300.00 Nos 24.05 7215.00
333 DSR6.29/2025 Providing and Displaying of Tradiscantia plant, full of leaves in Earthen Pot/ Plastic Pot of size 20 cm. as per direction of the officer-in-charge. 300.00 Nos 22.85 6855.00
334 DSR6.30/2025 Providing and Displaying of Wadelia trilobata plant, full of leaves in 15 cm size of Poly bags & as per direction of the officer-in-charge. 300.00 Nos 16.85 5055.00
Add GST @ 5.36% on (civil work & fire fighting work sor 2022) 6538212.61
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT-04 Gr02.pdf
NIT • 0.93 MB
NIT-04 Gr02.pdf
NIT • 0.93 MB
CHECK LIST FOR CONTRACTORS.pdf
NIT • 1.76 MB
JVG.pdf
NIT • 1.20 MB
BABA KARU- KHIRHAR BOQ.xlsx
NIT • 0.12 MB
91588_SBD BABA KARU- KHIRHAR.doc
NIT • 6.08 MB
BABA KARU- KHIRHAR BOQ.xlsx
NIT • 0.12 MB
Download all tender documents and submit your bid