SPL REPAIR OF CHAIN LINK WIRE FENCING (510 MTRS) ALL AROUND MES OFFICE COMPLEX AT MIL STN SURANUSSI UNDER AGE (I) SURANUSSI

Amount

Excavation in post holes for soft/loose soil(or similar holes ) each n.exc 0.50 Cum, and getteing out, returning filing in and ramming earth with broken rubble mixed with earth around in layers n.exc 25cm, watering etc and removing surplus soil n.exc 50m and making good surface in loose/soft soil complete all as specified. Note : the rates quoted shall be inclusive of cleaning the surrounding area where required for post hole.

M&L for PCC 1:3:6 type C-2 using graded stone aggregate as in filling in post holes ,foundation ,surface channels,drains,and other similar work complete all as specified .

S&F for Mild steel angle iron fencing post and sturts in fencing incl necessary cutting drilling welding and fixing nut and bolts etc and bending to swan neck shape as required and drilling holes notching for wives etc conforming to Fe-290 Gde E-165 complete all as specified. Note : the rates quoted shall be inclusive of cleaning the surrounding area where required for fixing of angle iron.

Fixing of chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed by Engr-in-charge Note : the rates quoted shall be inclusive of cleaning the surrounding area where required for fixing of chain link.

Supply of chain link MS galvanised fencing with 4mm dia GI wire and average size of mesh 75 mm x75 mm incl line wires, to any type of standards rails, staining bolts, etc incl provn of bindingwith mild steel wire not less than 0.9mm dia complete all as specified

M&L applying two coats of synthetic enamel paint over a coat of red oxide 0r zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

M&L for preparation of new steel surfaces n exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specifed and directed.

S&F Mild steel Round bars 10 mm dia and over bars (Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) cut ot length bent to shape required including cranbing, bending spirrally, hooking ends and binding with and including mild steel wire annealed net less than 0.9 mm dia or securing with clips all as specified

S&F galvanised, 2 strand , steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails staining bolts and MS Hook, incl securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured).

S&F MS Flat iron for securing bolts post and strut in fencing including cutting drilling holes notching for wire etc. flat iron filet and similar work conforming to FE 410-0 or Fe 310-0 complete all as specified

S&F mild steel screw bolts 10/12mm dia(machine made) with hexagonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm but n. exc. 15 cm long and dia of shank 5 to 10 mm complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground

Dismantling of fencing wire mesh, any type complete all as specified and as directed by Engineer-in-Charge.

Material and labour for hard core of broken boulders or stone agregate of gauge n. exc 63mm , deposited ,levelled in layers n.exc 15 cm th watered and well rammed to a true surface complete all as specified and directed

Material and labour for 75mm thick PCC 1:3:6 type C-2 as in plinth protection finishing the surface even and smooth without using extra cement laid to a slope of 1 to 20. It shall be laid in alternate bays, each bay not exceeding 3 m in length with joint to be filled with bituminous mastic filling comprising of mixture of one part of heated hot blown bitumen 85/25 penetration and three parts of heated sand all as directed by Engineer-In-Charge

SUNRISE CONSTRUCTION COMPANY (BID ID -3231073)

AAY KAY Constructions (BID ID -3225677)