Construction of RCC Duplex Building for D.G.P. Assam with Reception, Garrage, Site Development, Landscaping, Approach Road Etc. - Civil works, Sanitary, water Supply, Site preparation etc at 4th APBn. Kahilipara, Guwahati

Amount

CIVIL WORK Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (d) In medium rock of hard shale(ii) Without using blasting materials

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary.(a) With earth or silt or sand obtained by head load with lead upto 90m and lift upto 2m

(i) Extra for each 30m lead or part thereof beyond the initial lead of 90m (by head load)

(ii) Extra for each 1.5m lift or part thereof beyond the initial lift of 2.00m (by head load)

Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royalty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (a) Within Guwahati city only

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (b) In prop 1cement: 4 sand :8 coarse aggregate by volume

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser

(B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3

Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level.

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:(b) Using 25mm thick plank

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.

Flat Surfaces such as soffits of suspended floors, roofs, landings and the like. (a) Floors etc. upto 200mm in thickness.

Staircase with sloping or stepped soffits including risers and stringers but excluding Landing.

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (i) TMT Corrosion resistant steel (CRS) reiforcement bar

Brick work in cement mortar with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (c) In proportion 1:5.

(II) In superstructure above plinth level up to 1st floor level. (d) In proportion 1:5.(1 cement:5 sand)

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. (1 cement:4 sand)

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) b) Executive range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make i) Of size 800mmx800mm and above

Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department). iii) Of size300mmx600mm and above

Providing,fitting and fixing wooden flooring from Uniproducts (India) Ltd.of thickness 14mm made of pure wood(Engineered Wood) of different types with a top layer of 3mm thick hard wood and Under layer of 2mm thickness made of polythene and foamsheet laid on existing concrete floor complete as directed and specified Engineered Wood (New) from Uniproducts(India) Ltd. iii) Oak Brand

Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirting, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). Executive range Of size 300mmx300mm and above

Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirting over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). iv) Of size 300mmx600mm and above

Provinding & Fixing of base frame support which is fixed by use of small & big brackets . 3 Small & 1 Big Bracket are used to cover vertical length of 12 feet on which these 4 brackets directly to the wall ,These brackets have provisions for further fixing L & T Profiles (Aluminium), specially designed for fixing Fundermax . L Profiles are fixed as start & middle profile and have to fixed at a c/c distance of 600mm on walls and 450 mm on cielings. T Profiles are used at the joining point of 2 sheets. Special U Brackets are used if installation is to be done on a L Angle.

Providing & Fixing of Fundermax 6mm Panels These panels are fixed using special rivets ( MBE -Germany). Rivets hold the panels on to the channels and must be fixed a every 20mm from corner of cut sheet and/or at a maximum distance of 600mm for verical installation adn 450mm for cieling installation in case of fixing complete panels.

Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). (i) Executive Quality

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/ Pedelite /Rouf)/ white cement complete at all level as specified and directed. VITRIFIED ii)Executive range-2 (Sizes 600 mm x 300mm and above) i) Nitco made b). Imperia Series- Gres Lepato (1), Gres Lepato (2), Gres Lepato + Full Body

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directedB) On fair side d) In cement mortar 1:6

20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. A) On rough side (backing coat 15 mm and finishing coat 5mm thick) d) In cement mortar 1:6

15 mm thick plain cement mortar bands in cement mortar 1:4 in width including curing complete as directed. A) Up to 300 mm width c) Raised band

Providing surface preparation for walls, celling etc.using average 1.50 mm thick plaster of paris including clearing, rubbing with sand paper, filling gaps, depression etc. where necessary, with chalk powder and and plaster of paris paste, making the surface even and smooth complete at all levels as specified and directed.

Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Finishing wall with water proofing weather coat smooth anti-fungal exterior painting of Ace brand of Asian Paints and of required shade on old/new wall surface after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

Providing and fixing in position High Pressure Steam Cured Non Asbestos Fibre Cement Everest Heavy Duty Wall Board (Density>1500 Kg/m3) confirming IS 14862 & Type A as Eves Board to be fixed on iron or timberSection as per the drawing & directions of engineer-in-charge. Finally, if specified, the boards are to be painted with 2 coats of acrylic emulsion paint of approved shade/make over a coat of cement primer after installing it on to the concealed metal framework. ii) Using 12mm thick board of Everest make or equivalent

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a). With ready mixed "red-lead/ red oxide" primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Providing and fixing, in position suspended false ceiling using E-Grid (exposed ceiling suspension 2430 system) of grid size 600mm x 600mm/1200mmx600mm with main runner 38 x 24mm, cross tee 29mm x 24mm & wall angle 24mm x 24mm . Using 4mm/6mm thick High Pressure Steam Cured Non Asbestos Fibre Cement Board as per IS 14862, to be placed in a grid of G.I. system duly suspended with 4mm/6mm dia G.I/M.S bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinklers, smoke detectors etc. The main runners to be secured to structural soffit by hanger @ 1220mm maximum c/c. The last hanger at the end of each main runner should not be placed at more than 450mm from the adjacent wall. Flush fitting 1220mm cross tee to be interlocked between main runners @ 610mm c/c, so as to form 600mm x 600mm/1200mmx600mm grid, all complete as per the drawing & directions of engineer-in-charge. Finally, if specified, boards are to be painted with 2 coats of acrylic emulsion paint of approved shade/make over a coat of cement primer before installing it on the grid. (B) Designer Ceilings of Everest make or equivalent as directed by the departement (ii) Using 6 mm thick FC Board

Filling sunken floor with broken jhama brick bats and sand including compacting and supplying of materials complete as specified and directed for all levels.

Applying 2 coats of 1mm thick acrylic polymer modified cementitious waterproofing coating Brushbond of Fosroc Chemicals/Dr. Sealkit Flexbond AP 121 C (Asian Chemicals)/ MASTER SEAL 550 of BASF for waterproofing structures like roof slabs, basement, sunken slabs, chajjas, tunnels, water tank etc. after proper surface preparation and soaking the surface with water prior to application complete as specified and directed by the Department at all levels.

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (a) With sal wood

Providing and fixing wooden 100mmx 60mm rounded hand rails in straight lengths complete. (a) With Teak wood/Sissu wood.

Providing and fixing 25mmx25mm first class timber balustrade 25mmx25mm square, wrought fixed with ends housed (square or splayed) to hand rails and trends or strips complete. (a) With 1st class Teak wood / Sissu wood

Providing, fitting and fixing full panelled doors/ windows including oxidised M.S butt hinges (100mm x75 mm x3.55mm) with necessary screws (other fittings to be measured and paid separately ) A) With Teak wood / Sissu wood. (i) 40 mm thick.

Supplying, fitting, fixing brass fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ). a) Sliding door bolts i) 300mm x 16mm

b) Tower bolts i) 300mm x 10mm

c) Door handles iii) 150mm

t) Door stopper with rubber stopper

o) Mortice cylindrical type(Godrej make)-polished Brass

Supplying and installing uPVC- Fixed Windows made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with galvanized steel 1.5/2mm including glazing bead , grooving bead, drain cap, fisher screws, packing pieces, necessary stainless steel screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of Silicon sealant from inside / outside of dowcorning / GE or equivalent. With 5mm clear glass (a) Fixed window using uPVC sections of size 58mm x 52mm x 2.4mm thick wall for frame and 58mm x 68mm having 2.4mm thick wall for glass sash having reinforcement of 1.5mm thick in both frame & sash. (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)

Supplying and installing uPVC- Casement Windows made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC sections of wall thickness 2.4mm, multichambered with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including glazing bead, folding gasket, glazing gasket, friction stay, Espag handle, Espag, keeper, drain cap, run up block, fisher screws, packing pieces with all stainless steel screws complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets,bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent. (c) Double leaf Side hung Window with a Dummy Mullion - French Window (2 Panels) using uPVC section of size 58mm x 57mm x 2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wall for glass sash With 5mm clear float glass (WINSTA KOMMERLING/ FINESTA/ ENCRAFT)

Providing 8mm thick toughen glass in lieu of 5mm clear float glass

Providing colour coated DURASHINE/TATA BLUESCOPE zinc-aluminium profile sheet (total coated thickness=0.45mm) of nominal 1015mm effective cover width and nominal 28mm deep ribs with subtle square fluting in the five pan at nominal 203mm centre-to-centre including fasteners class 2 SDS, fitting and fixing complete. (Roof trusses, purlins etc. to be measured and paid separately.) (C) DURASHINE TILE PROFILE (0.50mm(TCT) x 505mm)

Providing colour coated DURASHINE/TATA BLUESCOPE zinc-aluminium roof , wall and tile profile sheet accessories (total coating thickness=0.45mm) including fasteners class 2 SDS, fitting and fixing complete. (Roof trusses, purlins etc. to be measured and paid separately.) (ii) Crimped Curved Ridge

(iv) Gutter / Flashings

Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. b) Using other ISI marked approved circular hollow section

Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. II Ornamental grill (c) Fixed to Brickwork/P.C.C/R.C.C.

Providing plinth protection 50mm thick to cement concrete 1 : 3 : 6 with coarse agg.of 20mm nominal size including finishing the surface with 10mm thick cement plaster in proportion 1:3 with a floating coat of neat cement finished.

Providing and laying controlled cement concrete pavement of approved grade with 20mm down graded stone aggregate over a prepared sub-base including dewatering if necessary, spread, compacted and finished in a continuous operation including provision of construction and expansion joints, plasticiser and curing compound of Fosroc/ Sika/ Choksey/ Degusa and hardener of Recron/ Degusa/ Fosroc; finishing to lines and grades and curing as specified and directed complete (form work and reinforcement shall be measured and paid separately). (b) M 25 Grade Concrete

Providing and laying of inter locking concrete block pavement (ICBP) with cement concrete paver blocks as per IS 15658-2006 of thickness 80mm and 28 days compressive strength not less than 30 N/m over a layer of bedding sand of compacted thickness 30mm, laid either in stretcher/ running/ herringbone pattern of bonds as directed by the engineer and in proper level and grade and compacted with appropriate equipment such as plat vibrator along with spreading of a thin layer of joint filling sand to fill up the gaps between blocks including construction of edge restraint wherever required complete as per drawings and Technical specification clause 1504 of MORD.

Supplying and planting of Dahlia / Chrysanthemum / Gladiolus on the ground ( bed planting, bed size 45 cm x 45 cm x 45 cm) including the preparation of the soil, providing organic manure and fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed .

Supplying and planting of suitable plant materials for preparation protective / external hedge (50 cm wide) including the preparation of the ground by mixing organic manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed .(B) ADOPTING CROSS WISE DOUBLE ROW PLANTING METHOD (iv) With Thuja / Ixora

Supplying and planting of ornamental trees (1'-0" height sapling) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . SHADE TREE (A) Neem / Mahaneem / Beef wood / Bakul / Acacia / Siris / Devils tree / Kadam / Palash / Pink Cassia / peepal / Silver oak / Simalu / Ajar

Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (i) 0.40 mm thick

Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete.

Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997 c) In M.S. angles, channels, Tees etc. Weight per Sqm = 0.15 qtl

SANITARY & WATER SUPPLY WORKS Providing and fixing Vitreous china pedastal type water closet (Europian type W.C. pan 400 mm high ) with seat and lid, CP brass hinges and rubber buffer CI/MS bracket, 40 mm dia flush bend and fittings i/c painting of brackets (Flushing cistern to be paid saparately) Parryware make White combination closet S trap, (Cat. No. C0205)

Providing and fixing PVC flushing cistern, with all internal fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) wherever required : Parryware make White single flush (Cat. No. C8090/C8055)

Providing and fixing vitreous china flat back type lipped front urinal basin with automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps including painting of fittings and cutting and making good the walls and floors wherever required : A) Parryware make White Integrated EFS - AC with power source ( Cat no. C8097/98)

Providing and fixing Vitreous China wash basin with C.I./MS brackets, CP brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required: (pillar taps stop cock and waste coupling are to paid saperately) A) Parryware make White Flair 550x400 (Cat. No. C0460/C316)

Providing and fixing Stainless Steel kitchen sink of Parryware make with C.I./MS brackets, CP brass chain with plug, PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required: sink cock, stop cock and waste coupling are to paid saperately) B) (i) Nirali make Glister Jumbo bowl size 610x460x254 (Cat. No. C0460/C316)

Providing and fixing CP Bottle trap complete as directed and specified.. (a) (i) Jaquar make Bottol trap (with internal partition) 32mm size with 250 mm long wall connection pipe (Cat. No. ALD769)

Providing and fixing CP wall mixer of quality & make as approved by Engineer in charge. (IV) (d) Lauret make wall mixture 3 in 1 system with provision for both telescopic and overhead shower complete with 115 mm long bend pipe (Cat. No. 1119)

Providing and fixing decorative mirror complete as directed and specified. (A) (b) Parryware make size 600x450 mm

Providing and fixing CP toilet paper holder complete as directed and specified.:(a) (i) Jaquar make Continental toilet paper holder (Cat. No. ACN1151N)

Providing and fixing ISI marked or similar approved HCI pipes including bolts and nuts and other fittings as required and complete at all levels : (b) concealed by cheiseling and making good the damage (ii) 100 mm dia

(iii) 150 mm dia

(iv) 200mm dia

Providing and fixing HCI plain bend including bolts and nuts and other fittings as required and complete at all levels . (b) concealed by cheiseling and making good the damage (ii) 100 mm dia

(i) 150 mm dia

Providing and fixing HCI plain bend with door including bolts and nuts and other fittings as required and complete at all levels. (b) concealed by cheiseling and making good the damage (ii) 100 mm dia

Providing and fixing single equal plain junction with door including bolts and nuts and other fittings as required and complete at all levels.. (b) concealed by cheiseling and making good the damage (ii) 100 mm dia

(i) 150 mm dia

Providing fitting and fixing HCI cowel with cement caulked joints to HCI pipes and fittings as specified.

Providing and fixing CP hinged grating, 110 mm dia in floor complete as directed and specified.

Providing fitting and and fixing overhead adjustable C.P. spray shower of 15 mm dia of Sona make with wall flange Hammer shower with arm

Supplying fitting and fixing CP Wall mixture complete as directed.(II) Lauret Make a) Wall mixture with telephonic shower arrangement with cruth (Regular) Cat. No. 1116 R

Providing and fixing C.P.towel rail complete as directed and specified. a (ii) Jaquar make continental 300 mm for washbasin (Cat. No. ACN1101N)

Providing and fixing C.P. Soap dish complete as directed and specified. (i) (a) Jaquar make continental (Cat. No. ACN1331N)

Providing and fixing C.P. bib cock 15 mm dia of approved brand as directed and specified. (Pipes shall be measure separatly) (I) (b) Essco make long body bib cock with flange.

Providing, fitting and fixing CP stop cock of approved brand of size mentioned below and directed and specified (Pipes shall be measure separatly) a (I) Jaquar make 15 mm nominal dia conceled stop cock

Supplying fitting and fixing CP basin mixture complete as directed. (II) Lauret Make a) Central hole basin mixture Cat no. 1210 for wash basin

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipe A) Exposed on wall (b) 20 mm nominal outer dia Pipes

(d) 32 mm nominal outer dia Pipes

(e)40 mm nominal outer dia Pipes

B) Concealed pipe with cutting chases and making good the walls. (a) 15 mm dia nominal outer dia pipes

(b) 20 mm dia nominal outer dia pipes

(c) 40 mm nominal outer dia Pipes

Providing and fixing gun metal country pit valve (full way valve) ISI marked as specified and directed. (d) 20 mm nominal bore

(b) 40 mm nominal bore.

Providing and fixing ball valve complete as directed and specified. (a) 25 mm nominal bore

Providing and fixing gun metal check valve including necessary threads to pipe (b) 20 mm nominal bore

(a) 32mm nominal bore

Suppling, fitting and fixing approved uPVC pipe of different sizes with all necessary fittings of approved brand such as bend, tee, elbow, reducers, nipple, plug, long screw, fitting clamps, etc.complete at all levels as directed and specified. (B) Concealed chiesling or breking brick wall / CC wall / RCC wall and making good to the damaged structure. SUPREME / PRINCE/ SFMC/ FUSION Band or other equalent brand ( high pressure pipe SCH 40 ) (f) 15mm nominal bore

Constructing inspection pit inside measurement 450x450x450 mm flush with 100 mm dia HCI/PVC pipes and cement concrete base in 1:3:6 over flat brick soiling, 12 cm brick work in cement mortar 1:4 (1 cement :4 coarse sand) finished with 13 mm cement plaster in 1:2 cement mortar for inside walls and floor. 450x450 air tight CI inspection pit cover and frame complete including supply of materials and necessary excavation.complete as per design :

Providing and fixing in position 450 mm dia, 90 mm thick CI manhole cover and frame of 25 kg weight complete as directed and specifiedrequired shape and approved quality

Construction of filter bed in soak pit including earth work in excavation of soil and than filling up the trench with brick bat/charcoal covered with earth over a layer of AC plain sheet above brick bat filling complete as directed, (Sizes of soak pit may vary depending on the sizes and capacity of the septic tank as well as the no. of users as mentioned.)

Supplying, fitting and fixing pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same. B0 uPVC pipe with uPVC fittings (Using High pressure pipe)(Using Supreme/ Prince/ SFMC/ Fusion brand pipe) xii) 160 mm dia

xii) 200 mm dia

Providing,Fixing, testing &Commissioning of Rain water Hervesting system for 1000 sq.feet roof area with 110 mm uPVC pipe of Class-3 conforming to IS:4985-200 (with uptodate amendment) with extra UV ray protection by Titanium Dioxide(TiO2) directing the Rainwater to Rainy filter/Pop-up raintap filter (Excluding Civil Works)

Water storage tank ISI Marked, conforming to IS:12701/1996 (with uptodate amendment). (Excluding Civil Works)

Providing fitting and installation at site BIO - Septic tank system for 100 users as per specification provided by the department.

Labour for boring hole for inserting tube well pipes thro' different soil / rock media including hire purchase of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the department.vi) Bore hole of 200 mm diameter.

Supplying, fitting and fixing pipes plain/bevel ended for casing confirming to relevant IS codes of practice including supplying and fitting of accessary, lowering of assembly pipes concentrically in the bore hole followed by supplying and packing of pea gravel free from dirt, dust and other foriegn material in the annular space between the bore hole and assembly pipescomplete as directed by the department.II) PVC pipe Supreme/ Prince/ Fusion / SFMC brand vii) 160 mm diameter

Supplying, fitting and fixing suction pipes plain/bevel ended confirming to relevant IS codes of practice including supplying and fitting of accessary, lowering of assembly pipes concentrically in the casing pipes complete as directed. A) GI pipe a) Tata/ Sail (medeium) socket should be welded to pipe. ii) 40 mm diameter

Supplying, fitting and fixing ISI approved PVC filter 3.0 meter long

Development of the tubewell with compressor or by over pumping unit for 48 hours till sand free discharge is obtained.

Flushing, clearing, washing and watering of tube well

Suppling and installation of single phase submercible pump set (Texmo1.50 HP Crompton Greaves Single phase pump submerssible Pump set including necessary cable for underground and over ground. Panel boardas directed by the deparment

FIRE FIGHTING Supply, Installation, Fixing of CARBON DIOXIDE Fire Extinguisher confirming to IS: 2878 with ISI Mark.(4.5 LITERS) BRAND: FIRESTOP / FIREND / FIRESHIELD 4.5 kg capacity Cylinder - IS :15683

Supply, Installation, Fixing of ABC Stored Pressure Fire Extinguisher with built – In pressure Gauge to know the Ready ness of the Extinguisher Squeeze Grip Handle As per IS:13849 with ISI mark (05 kg capacity) BRAND : FIRESTOP / FIREND / FIRE SHIELD

RECEPTION Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling the quantity as necessary after completion of work, breaking clods in return filling, dressing, wattering and ramming etc. and removal of surplus earth with all lead and lift as directed and specified in the following classification os soils including bailing out where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil

Supplying and filling sand gravel in foundation trenches of column footings over slushy soil including local carriage of materials within 8 km pumping out of water, ramming etc. complete for strengthening the bearing capacity of the soil as directed and specified including payment of Forest Royalty and Sales Tax and other duties and taxes as may be necessary.

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, bricks works, etc. as directed and specified including dewatering if necessary and curing complete. In prop 1cement : 4sand : 8coarse aggregate by volume

Providing and laying plain/reinforcement cement concrete works cement, coarse sand, & 20mm down graded stone aggregate including dewatering if necessary, and curing complted but exceding cost of form work and reinforcement for reinforcement cement concrete work. (form work and reinforcement will be measured and paid separately) (A) In substructure up to plinth level without using admixture, M20 grade concrete

(B) In super structure from plinth level up to 1st Floor. (C) M20 grade concrete

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, shuttering and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0m and removal of the same for in-situ reinforced and plain cement concrete work in. Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc.(a) Using 38mm thick plank

Sides of tie beams, grade beams etc. at or below ground level. (a) Using 38mm thick plank

Columns, Pillars, Posts & Strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face (a) Using 38mm thick plank upto Roof

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) Using 38mm thick plank up to Roof

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a).Brick on flat soling.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (c) In proportion 1:5.

Cellular Concrete Block work using Cellular Light Weight concrete block of Size 500x200x100mm conforming to IS-2185 Pt-3 or pt-4 in cement morter of proportion 1: 5 including racking out joints and curing complete as directed instructure. (protruding rod is to be provided at every 3 course interval and will be measured and paid separately) (b) In superstructure above plinth level up to 1st floor level.

Cement concrete works in topping 1:1:2 (1cement :1sand :2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg.of cement per sq. m. of floor to be laid in panels including curing complete as directed. (a) 15 mm thick

65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed.

10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to Roofr level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. b) In cement mortar 1:4

15mm Thick cement plaster in single coat on single half brick wall for interior plastering upto Roof lvl including arises,internal rounded angles,not exceding 80mm grith and finished even and smooth inluding curing complete as directed. A) On rough side b) In cement mortar 1:4

Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) TATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement (iii) 0.50 mm thick

Providing dressed wood work in post, walls,battens, post plate bressumers etc. includingsupplying and fixing with spikes, nails,bolt and nuts of 12mm dia(M.S) and required length etc.complete with kiricide oiling two coats to faces in contact with C.C or masonry (M.S flats, angle cleats and bolt and nuts required for flats,angle cleats wherever use shall be measured and paid separately) (a) With sal wood

Providing, fitting and fixing factory made Santro Flush door shutters having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly thick cross bands, styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately.) (a) 30 mm thick

Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. I . Plain grill (a) Fixed to wooden frames

Providing, fitting and fixing anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels. (Cement concrete to be measured and paid separately). a)Side hung and Top hung windows and ventilators i) 6 mm clear glass

Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a). Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Finishing wall with two coats of waterproofing cement coatings of Unicem "Shakti" brand of required shade by thinning 1 part of paint with 1 part of water to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department.

Providing plinth protection 50mm thick to cement concrete 1 : 3 : 6 with coarse agg.of 20mm nominal size including finishing the surface with 10mm thick cement plaster in proportion 1:3 with a floting coat of neat cement finished.

Supplying, fitting and fixing in position reinforcement bars conforming to relevent IS code, for reinforced cement concrete works in piles including straightening, cleaning, cutting and bending to proper shapes and length as per specifications and drawings. The rings should be welded with vertical reinforcements as per specified IS codes of practice. (Inclusive of lap length, hook, chair, bend, anchor...etc) (B) TMT bar of other ISI marked (From Secondary producer)

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). (i) 9.5mm thick

Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Tapan Deka