SPL REPAIRS TO BLDG NO P-117 AT TPT CCOY ASC, RENOVATION OF OR TOILET BLOCK AT GARUDA SARATH OFFRS MESS, PROVN OF TILING WORK IN TOILET AT SUDAN LINES, TILING WORK AND PVC JOINERY TO TOILET NO 1 AND PATH FROM MT GATE TO MAIN OFFICE IN GRANADIERS, SO

Amount

Demolition of cement concrete, unreinforced, in ground floors and pavings not exceeding 15cm thickness below or above ground level, complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position complete all as specified and as directed.

Demolition of mud/cement concrete in roofs including plastering and leeping, including cleaning surface of roof with wire brushes thoroughly to remove loose dust/dirt particles to expose clean concrete surface and washing with water, complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, complete all as specified and as directed.

Dismantling brick tiles single layer on roof, bedded, jointed and pointed in cement mortar, complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, including racking out joints, hacking for key, scrubbing down with water etc., to receive new plaster, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each and removing from site, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4.0Sqm each and removing from site, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge and any thickness including Nainital or similar pattern roof coverings, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) & removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Taking down steel tubing and connections including cleaning for refixing or removal from site for bore of pipe 15mm, complete all as specified and as directed.

Taking down steel tubing and connections including cleaning for refixing or removal from site for bore of pipe 20mm, complete all as specified and as directed.

Dismantling existing water tanks of capacity exc 500 & not exceeding 1000 ltrs lowering from its position and removal to store, complete all as specified and as directed.

Demolition and breaking up drain pipes (salt-glazed stone ware, AC or reinforced concrete) set in cement mortar 100mm dia, complete all as specified and as directed.

Demolition and breaking up drain pipes (salt-glazed stone ware, AC or reinforced concrete) set in cement mortar 150mm dia, complete all as specified and as directed.

Demolition and breaking up drain pipes (salt-glazed stone ware, AC or reinforced concrete) set in cement mortar 200mm dia, complete all as specified and as directed.

Taking down rain water pipes (any size and pattern) including all fittings, head shoes, bends, swan necks, etc., and removal off the site, complete all as specified and as directed.

Surface excavation in any type of soil not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and as directed.

Excavation in over areas not exceeding 1.5mtr deep and getting out complete in any type of soil, complete all as specified and as directed.

Excavation in over areas exceeding 1.5mtr but not exceeding 3.0mtr deep and getting out complete in any type of soil, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5mtr deep and getting out complete in any type of soil, complete all as specified and as directed.

Returning, filling in, including spreading, leveling watering and well raming in layers not exceeding 25cms thick complete all as specified and as directed.

Removal of surplus soil to a distance not exceeding 50mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and as directed.

Loose filling of broken brick aggregate of guage 40 to 80 mm as in sokage pit, soakage well etc., spread and levelled, complete all as specified and as directed.

Hard core using broken stone or boulders of gauge not exc 63mm, deposited, spread, levelled, watered and well rammed to a true surface, complete all as specified and as directed.

Plain cement concrete 1:4:8, Type D-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and as directed.

Plain cement concrete 1:2:4, Type B-0 using 12.50mm graded crushed stone aggregate as in mass concrete and roof padding, complete all as specified and as directed.

Plain cement concrete 1:2:4 type B- 1 using 20mm graded crushed stone aggregate as in window or door cills, lintels, bressumers, steps, quoins blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundry pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets etc. (including form work), with plain fair faces, including chamfers, weathering, throaing etc., complete all as specified and as directed.

Plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate, as in kerb stones, mud stops and similar items including weathering, slightly rounded or chamfered angles and throating on top of chajjas, rails, cills etc., including necessary form work required if any, complete all as specified and as directed.

Reinforced cement concrete 1:1.5:3 type A-1 using 20mm graded crushed stone aggregate, as in roof/floor slabs supported on walls, beams and shelves etc., complete all as specified and directed.

Precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate, as in drain covers (perforated type) and the like, set in cement mortar 1:4, complete all as specified and as directed.

PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in surface channels and drains. complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc., complete all as specified and directed.

Brick work with sub class “B” bricks straight or curved on plan exceeding 6mtr mean radius built in cement mortar 1:6 using old size bricks, complete all as specified and as directed.

Brick work with sub class “B” bricks straight or curved on plan exceeding 6mtr mean radius built in cement mortar 1:4 using old size bricks, complete all as specified and as directed.

Cutting out grooves in brick wall, 75mm wide and 40mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and as directed.

40mm thick Brick tiles laid over 15mm thick screed bed in cement mortar 1:6, joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement, complete all as specified and as directed.

Use and waste of form work to soffits of suspended slabs such as roof slabs, etc., not exceeding 200mm thickness for fair finished concrete surfaces, complete all as specified and as directed.

Use and waste of form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide, complete all as specified and as directed.

Use and waste of form work to soffits of soffits and sides of chajjas, shelves etc., for fair finished concrete surfaces, complete all as specified and as directed.

Plain, solid, straight chowkats and frames made out of 2nd class hard wood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and as directed.

Factory made 35mm thick second class hard wood for plain framed panelled shutters (any number of panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rail & style as per IS: 1003(Part 1), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS squqre tube. complete all as specified and directed.

Factory made solid panel PVC door shutter 28-30mm thick (style) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm thick Plain coloured PVC back face including supplying and fixing in the frame at site, complete all as specified and as directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail, lock on either side and gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointing together with solvent cement, supplying & fixing of frame at site, complete all as specified and as directed.

100mm size butt hinges (medium weight) colled rolled mild steel, fixed in repairs, complete all as specified and as directed.

Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B- 21 of size 100mm, complete all as specified and as directed.

Extruded aluminium alloy handles fabricated type anodised of size 125mm size, fixed in repairs, complete all as specified and as directed.

Extruded aluminium alloy handles fabricated type anodised of size 150mm size, fixed in repairs, complete all as specified and as directed.

Aluminium anodized 150mm size barrel tower bolt of extruded section, fixed in repairs, complete all as specified and as directed.

Aluminium anodized 200mm size barrel tower bolt of extruded section, fixed in repairs, complete all as specified and as directed.

Aluminium alloy anodised sliding door bolt with hasp, stape (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 300mm size, complete all as specified and as directed.

Aluminum alloy powder coated (50 micron) anodized door frame of section 100mm x 44mm x 2mm thick, door shutter of aluminum section of size 85mm x 44mm x 2mm thick, top rail and both stylesof size 100mm x 44mm x 2mm thick,lock rail and bottom rail of size 115mm x 44mm x mm thick including aluminum anodized snap beading and rubber packing,& 5.5mm thick frosted designer glass (as approved by GE), duly fitted with 100mm long aluminum butt hinges- 04 Nos. to each leaf, 200mm size aluminium tower bolt, 200mm long fancy type Aluminium handle- 02 Nos on each leaf, 4 lever brass 100 mm size mortice lock, & double action floor door spring heavy duty suitable for 1mtr wide shutter for each leaf, complete all as specified and directed.

Aluminium anodized decorative grills with mesh size 30mm x 30mm made ouit of 6mm-5mm thick aluminium section with fixing rails of aluminium channels 12-15mm, complete all as specified and as directed.

Steel ventilators with centre hung shutters including steel handles and steel peg stay complete with glazing bars dovetailed or welded, complete all as specified and as directed.

Mild steel flat iron work as in hold fasts, including all necessary drilling, bolting or cutting, bending, etc, complete all as specified and as directed.

Mild steel TMT bars upto 10mm dia, cut to length, bent to shape required, including cranking, bending, spirally for hopping for columns, hooking ends, and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S or Fe-410-0, complete all as specified and as directed.

Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending, spirally for hopping for columns, hooking ends, and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S or Fe-410-0, complete all as specified and as directed.

TMT bars 5mm dia and over upto and including10mm dia cut to length, in stirrups and spacers including cutting and bending, hooking ends & binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates to Fe-290 (Gde E- 165), complete all as specified and as directed.

Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

15mm thick screed bed in cement mortar 1:4 on concrete surfaces over top of roof slabs to receive water proofing treatment, finished even and rough, complete all as specified and as directed.

Supply only Liquid integral water proofing admixture, complete all as specified and as directed.

Applying evenly a tack coat of industrial bitumen 85/[email protected]/Sqm over a coat of primer @ 0.5Ltr/Sqm to the cleaned concrete surfaces. Laying APP modified membrane weighing not less than 3.0Kg/Sqm and thickness of membrane not less than 3mm (Reinforced with polyster non woven fabric of weight not less than 150gms/Sqm) having water absorption of not more than 1% of mass within 24Hrs and water tightness/impermeability at 2Kg/Sqm fixed with torch application method by authorized applicator of manufacturer in following steps :- a) Applying bitumen based primer @ 0.5Ltr/Sqm b) Laying a layer of APP with torch application method having100mm overlap in longitudinal direction and 100mm overlap in transeverse direction. All joints and change of direction should be curved with cement at corners and well cured before laying of membrane, complete all as specified and as directed.

Vibro compacted Precast concrete interlocking paver blocks, factory made,any shape and size conforming to IS- 15658- 2006 of 60mm thick, M-35 Grade set, jointed in neat cement slurry and pointed flush with grey cement mixed with pigments to match colour of blocks in floors laid over 30mm thick sand cushioning, complete all as specified and as directed.

Vibro compacted Precast concrete interlocking paver blocks, factory made,any shape and size conforming to IS- 15658- 2006 of 80mm thick, M-40 Grade set, jointed in neat cement slurry and pointed flush with grey cement mixed with pigments to match colour of blocks in floors laid over 30mm thick sand cushioning, complete all as specified and as directed.

75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base, finished even and fair, complete all as specified and as directed.

50mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate, as in sub base to receive topping layer finished even and rough, complete all as specified and as directed.

25mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate, as in sub base to receive topping layer finished even and rough, complete all as specified and as directed.

75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection including finishing the surface even and fair, complete all as specified and as directed.

Glazed Coloured Ceramic tiles in vertical surfaces of skirtings, dados, sides of pillars, risers of steps, size of each tile 300mm x 200mm x 6-7mm thick set and joint in neat cement slury and pointed in white or colour cement to match laid over 10 mm thick screed bed in CM 1:4, complete all as specified and as directed.

Glazed Coloured Ceramic tiles in vertical urfaces of skirtings, dados, sides of pillars, risers of steps, size of each tile 450mm x 300mm x 6-7mm thick set and joint in neat cement slury and pointed in white or colour cement to match laid over 10 mm thick screed bed in CM 1:4, complete all as specified and as directed.

Anti skid ceramic coloured tiles 7 to 8mm thick area of each tile 400mm x 400mm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4, including dismantling of old tiles with backing, complete all as specified and as directed.

Anti skid ceramic coloured tiles 7 to 8mm thick area of each tile 300mm x 300mm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4, including dismantling of old tiles with backing, complete all as specified and as directed.

Anti skid joint free ceramic coloured floor tiles, 7-8mm thick, size of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm as in floors set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 15 mm thick bedding layer in cement mortar 1:4, complete all as specified and as directed.

Anti skid joint free ceramic coloured tiles, 7-8mm thick, size of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm as in vertical surfaces of skirtings etc., set and joint in neat cement slury and pointed in white or colour cement to match laid over 10 mm thick screed bed in CM 1:4, complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 5mm thick on fair faces of concrete surfaces as in ceilings in cement mortar 1:3 finished even and smooth without using extra cement, complete all as specified and as directed.

Supply only Liquid integral water proofing admixture, complete all as specified and as directed.

Preparation of newly plastered or unplastered surface of ceilings and applying three coats of white wash, complete all as specified and as directed.

Preparation of newly plastered or unplastered surface of walls and applying three coats of white wash, complete all as specified and as directed.

Preparing newly plastered surfaces of wall and applying two cement based paint over a coat of cement wash, complete all as specified and as directed.

Preparation of newly plastered surfaces of ceilings and applying two coats of plastic emulsion paint over a coat of primer after applying a 2-3mm thick layer of Birla/JK white wall cate putty and sanding of surface to smooth finish, complete all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying two coats of plastic emulsion paint over a coat of primer after applying a 2-3mm thick layer of Birla/JK white wall cate putty and sanding of surface to smooth finish, complete all as specified and as directed.

Preparation of old surfaces of wall/ceiling with the help of mechaniser sander of Make Asian paints or its equivalent as per List of makes express painting sanding machine or equivalent make (having mechanical vaccum machine with bag for dust collection) to make surface smooth and even and applying a 2-3mm thick layer of Birla/JK white wall cate putty and sanding of surface to smooth finish and finishing the prepared surface with two cats of weather proof exterior acrylic emulsion paint of premium quality, complete all as specified and as directed.

Preparation of new wooden surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint on surfaces of any description exceeding 10 cm width or girth over a coat of red oxide, complete all as specified and as directed.

Sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm.in each pane, complete all as specified and as directed.

3.00mm thick figured glass, pin headed type, and glazing with oil putty in square not exceeding 0.5 Sqm.in each pane, complete all as specified and as directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar1:3 in brick or stone wall , cutting not exc 10cm girth, complete all as specified and as directed.

15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, complete all as specified and as directed.

20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, complete all as specified and as directed.

Rotational moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and as directed.

20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed minimum weight -210gms, fixed in repairs, complete all as specified and as directed.

Vitreous china wash down closet pan (pedestal pattern), white with "S" trap, including plastic seat and cover and connecting to outgoing pipe, flush pipe and anti syphonage pipe, fixed in repairs, complete all as specified and as directed.

Water closet squatt pan (Orissa Pattern) complete including provision of lime concrete bedding Orissa pattern size 580mm x 440mm white with integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc., fixed in repairs, complete all as specified and as directed

PVC valve less syphonic action type flushing cistern, low level, 10 litres capacity including flush pipe PVC connection, float valve, PVC handle/button and connections complete including taking down old unserviceable flushing cistern any type, fixed in repairs, complete all as specified and as directed.

Wash basin, Vitreous China white flat back of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand but excluding taps, waste, chain and plugs and proclain stopper but including brackets, fixed in repairs, complete all as specified and as directed.

Vitreous china wash basin under/over counter oval type size 550mm x 460mm including cutting for and pinning in ends of brackets, fixing of 32mm low density polythene pipe of pressure rating 6Kg/Sqcm, waste coupling, PVC Connection 450mm long with PTMT end nuts, brackets etc., complete all as specified and as directed.

Vitreous china Urinal bowl, flat back, size of 465x355x265mm white minium with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement (excluding flushing cistern, flush pipe) and waste pipe with discharge arrangement, complete all as specified and as directed.

Urinal spreader of PTMT of any colour for fixing with 15mm dia pipe, complete all as specified and as directed.

15mm bore bib tap chromium plated brass short body, Fancy type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule, fixed in repairs, complete all as specified and as directed.

CP brass shower rose fancy type 125mm size with or without swivel joint for 15mm bore pipe, fixed in repairs, complete all as specified and as directed.

PVC connection 15mm dia and 300mm long with 2 Nos PTMT nuts, fixed in repairs, complete all as specified and as directed.

PVC connection 15mm dia and 450mm long with 2 Nos PTMT nuts, fixed in repairs, complete all as specified and as directed.

Fancy type Stop valves, cast copper alloy chromium plated screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipes or for unions, 15mm dia of pipe, fixed in repairs, complete all as specified and as directed.

Stop valve, cast copper alloy fancy type chromium plated with long shank and cup (concealed type) for iron pipe of 15mm bore, fixed in repairs, complete all as specified and as directed.

Pillar taps cast copper alloy fancy type chromium plated with capstan heads screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe of 15 mm bore, fixed in repairs, complete all as specified and as directed.

Chromium plated tubular towel rail 20mm dia 600 mm long, fixed with brass screws, fixed in repairs, complete all as specified and as directed.

15mm bore brass chromium plated basin mixer of mixing 'Hot' and 'Cold' water with long shank, screwed down for iron pipe, fixed in repairs, complete all as specified and as directed.

Soap dish, vitreous China white, approximate size 160x160x90mm, fixed in repairs, complete all as specified and as directed.

Gun metal globe or gate valve screwed down high pressure with iron wheel head, screwed both ends for iron pipe 20mm bore, fixed in repairs, complete all as specified and as directed.

32mm spring type PVC waste pipe fixed toWHB and urinals, ( Note minimum length of each pipe should not be less than 0.80RM), fixed in repairs, complete all as specified and as directed.

PTMT Waste coupling 32mm (half or fully threaded) for sinks, basins, etc. with long screwed shanks and fly-nuts, flange end (Minimum weight 45gms), fixed in repairs, complete all as specified and as directed.

PVC 110mm bore (SWR) pipes single socketed, in any length with rubber ring joints, flaid in trenches or in floors, complete all as specified and as directed.

PVC 75mm bore (SWR) pipes single socketed, in any length with rubber ring joints, flaid in trenches or in floors, complete all as specified and as directed.

PVC (SWR) bend of 110mm bore any radius, complete all as specified and as directed.

PVC (SWR) bend of 75mm bore any radius, complete all as specified and as directed.

PVC (SWR) single Junction (Single T) of 110mm bore, complete all as specified and as directed.

PVC (SWR) vent cowl of 110mm bore , complete all as specified and as directed.

PVC floor/nahani trap 75mm bore, with grating including jointing in solvent cement to waste pipe, complete all as specified and as directed.

100mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including securing ends of stays to wall or roof, fixed in repairs, complete all as specified and as directed.

Cutting into existing manholes for connecting 150mm bore of pipe to new drains, making good to pipe in cement concrete 1:2:4 type B-1, including cutting into existing benching for and forming branch channel (1/2 round or 3/4 section) smooth finished including rendering, complete all as specified and as directed.

Cement concrete type D-2, 1:4:8 (using 40 mm graded crushed stone aggregate) in bed to drain pipe 150 mm dia including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

Cement concrete type D-2, 1:4:8 (using 40 mm graded crushed stone aggregate) in bed to drain pipe 200 mm dia including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

150mm internal dia RCC hume pipe class NP-2, laid in trenches and jointed in cement mortar, complete all as specified and directed.

SGSW pipe grade 'A' 150 mm dia including jointing with cement mortar, complete all as specified and directed.

SGSW pipe grade 'A' 200 mm dia including jointing with cement mortar, complete all as specified and directed.

Factory made Precast Plastic Fibre Reinforced concrete manhole covers of size exceeding 0.35Sqm but not exceeding 1.5Sqm each cover, 75mm thick with frame medium duty conforming to IS-12592 including necessary hold fasts and lifting hooks, fixed in repairs, complete all as specified and as directed.

Construction of septic tank for 25 users (Brick masonry), including excavation in any type of soil, foundation in PCC 1:2:4 type B-1, brick masonry in cement mortar 1:4, RCC slab in 1:1.5:3 type A-1 including manhole cover with angle iron frame work embedded in RCC slab with flat iron lugs, having vent shaft of 75mm CI pipe and sludge chamber complete all as shown on latest CE Delhi Zone TD Drg and as directed by Engr-in-Charge.

Taking down carefully old unserviceable copper/aluminium point wiring From existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket etc are to be measured seperately and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing etc complete all as specified and as directed.

Point wiring complete with 1.5 Sqmm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers except conduit junction box (junction box will be of MS) including FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size for fixing modular switches/sockets/fan regulator etc , with and including Modular cover plates of suitable size and making good surface as original by plastering, whitewash/colour and distemper etc complete all as specified and as directed for the following :- one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

All as per description of Srl item No. 139 here-in-before but for one socket outlet 5/6 Amps on same board.

All as per description of Srl item No. 139 here-in-before but for one socket outlet 6 Amps on independent board.

All as per description of Srl item No.139 here-in-before but for power socket 16 Amp with cable 2.5 Sqmm for phase & neutral for earth 1.5 Sqmm.

Replacement of Switch piano flush type, single pole, one way, 6 Amps, complete all as specified and as directed.

Replacement of Switch piano flush type, single pole, one way, 16 Amps, complete all as specified and as directed.

Replacement of socket two-in-one, 5 pin, 6 Amp universal type, complete all as specified and as directed.

Replacement of socket two-in-one, 6 pin, 16 Amp universal type, complete all as specified and as directed.

Sub main wiring with 2 run of 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC conduit with and including 6.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as specified and as directed. Note :- a) The conduit and conduit accessories shall be measured and paid as one unit. b) The cost of earth wire is deemed to included in he quoted rates.

MCB DB confirming to IP 43 - IK 09 with double door, SPN 08 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces, complete all as specified and as directed.

MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection, complete all as specified and as directed.

MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole and Neutral of 40 to 63 Amp capacity, complete all as specified and as directed.

Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps and making good surface as original by plastering and whitewash/ colour/ distemper etc., complete all as specified and as directed.

LED Mirror light 10/12W diffuser, driver including making all electric connections using PVC Sheathed copper conductor flexible cable, complete all as specified and as directed.

Wall mounting tube light fitting, 22 watt including making all electric connections using PVC Sheathed copper conductor flexible cable, complete all as specified and as directed.

LED security light luminaire 45 watt pressure die cast aluminium housing with heat resistance toughned glass and IP- 66 protection with and including driver/transformer and including connector, complete all as specified and as directed.

Street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40 mm dia size light grade complete with nut, bolts, washer etc., inclusive of one primer coat, one under coat and one finishing coat of silver paint, complete all as specified and as directed.

Earthing complete with GI earth plate electrode 600 mm x 600mm x 6mm thick burried directly in ground not less than 2.25 mtrs below ground level, with top edge of the plate not less than 1.5 mtrs deep below normal ground level, connected to galvanised earth wire 4mm by means of bolts, nuts check nuts to earth test point including necessary PCC 1:2:4 type B-1 pit, cover frame, GI pipe 15mm dia light grade for protection of earthing lead and GI pipe 20 mm dia for watering pipe with funnel, wire mesh, salt, charcoal dust and excavation, complete all as specified and as directed.

NOTE:- For minimum fair wages ,EPF and payment to labour employed, refer Sch A Note No-17,18 and Special Condition No 5 & 21.2 of this tender. Contractor must produce all the relevent record such as payment made to labour, EPF etc at the time of payment of RARs/Final bill. No payment will be released to contrator without producing the proper record.

NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area, without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision.