Carryout the Renovation works in TNCSC godown campuses at Villupuram, V.Salai, Tindivanam, Vanur, Gingee and Thirukovilur in Villupuram District

Amount

CIVIL WORK

Carryout the Renovation works in TNCSC Godown campus at Villupuram Taluk & District. clearing scrub jungle

Dismantling clearing away and carefully stacking materials useful for re-use for any thic kenss of walls, plain cement concrete. For AC Sheet Roofing

Supplying and filling in foundation and basement with M Sand in layers of 150mm thick, well watered, rammed and consolidated including watering etc., complete complying with standard specifications and as directed.

Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed. Foundation and basement.

In ground floor

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed..

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Labour charges for re alignment of existing AC Corrugated sheets including fixing of ridges, cost of U or J bolts and nuts, bitumen washers, etc. complete and as directed by the Engineer in charge complete.

Servicing the existing rolling shutter of size 1.80 x 2.60m such spring tension adjustment attending leaves repair works, locking adjustment, applying grease and kerosene wahsing for easy uplifting including cost of labour for removing and refixing the rolling shutter, cost of kerosene and grease etc., complete complying with standard specification and as directed by the departmental officers.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir,wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete For Place surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist

Supplying and fabrication of M.S Angle iron section for vertical stanction and forming truss used with M.S square/Rectangular pipe and necessary M.S angles for cleat, and .for purlins with M.S square pipe has to be fabricated including cost of one coat of primer, bolt and nuts etc., complete complying with standard specification and as per the direction of corporation officers.

Supplying and laying of profiled colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site)

Supplying and fixing in position 100mm x 50mm x 9.4 Kg channel for the face of RAT GUARD Ending slab with MS bolts 16mm dia 45cm long at 2m centres forming projection to the loading platform finishing in flush with the slab with C.M. 1:3 (One cement and three sand) etc. complete including painting the exposed surface of MS channel with Coats of ANTI CORROSIVE METALLIC NUT BROWN

Renewal by supplying and fixing M.S. iron grill gate using necessary M.S.angle / M.S. flats which should be fixed to Gate s per design furnished by the departmental officers.

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the departmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 23x23x2cm laid in cement mortar 1:2 (one of cement and two of sand)mixing with water proofing compound confirming to ISS at 2% weight of cement used and pointed with water proofing compound mixed with red oxide etc., complete complying with standard specification and as directed by the departmental officers.

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Renewing the broken AIW and Ventilator /window glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.

Painting the existing walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coats with best shell lime in all floors including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work such as steel doors, windows, ventilators, winow bars, balustrades etc. with two coats of synthetic enamel paint and approved quality and colour coat in all floors. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works).

supplying and filling in basement with wetmix 250mm thick in layers of not exceeding 250mm thick, well watered, rammed and consolidated including machineries for hire and running charges leader 5 Cum capacity,hire charges for tipper,water sprinkler,vibratory roller all labour charges etc., complete complying with standard specification and as directed.

Providing and laying WBM Road Grade-II metal of 75mm compacted thickness using 1 Cum of 63mm to 45mm IRC metal and 0.24 m3 of gravel for blindage for 10 Sqm. for bottom layer including cost and conveyance of all materials from approved quarry to work site and stacking them to departmental gauge for pre-measurement, as directed by the department officers including labour for spreading metal and gravel for blindage and hand packing to camber watering with all leads for good water slurring and rolling and consolidation by power roller and finishing as per MORD 405 including hire and fuel charges for power roller and water sprinkler and all other tools and plants employed and all other incidental charges etc., complete complying with standard specification and as directed by the departmental officers. (Bottom layer)

Providing and laying WBM Road Grade-III metal of 75mm compacted thickness by using 1 cum of 53mm to 22.40mm IRC metal and conveyance of all material from approved quarry to worksite and stacking them to departmental gauge for pre-measurement as directed by the department officers including labour for spreading metal and gravel hand packing to camber and gravel for blindage with required quantity of gravel for forming edge bunds watering with all leads for good water slurring rolling and consolidation by power roller and finished as per MORD 405 including hire and fuel charges etc., complete complying with standard specification and as directed by the departmental officers. (Top layer).

Carryout the Renovation works in TNCSC Godown campus at Gingee Taluk in Villupuram District clearing scrub jungle

Dismantling AC sheet roofing without roof timbers and clearing away and carefully stacking materials useful for reuse as directed by the departmental officers.

CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering, side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed. For Foundation basement

For Ground floor

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed..

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Labour charges for re alignment of existing AC Corrugated sheets including fixing of ridges, cost of U or J bolts and nuts, bitumen washers, etc. complete and as directed by the Engineer in charge complete.

Servicing the existing rolling shutter of size 1.80 x 2.60m such spring tension adjustment attending leaves repair works, locking adjustment, applying grease and kerosene wahsing for easy uplifting including cost of labour for removing and refixing the rolling shutter, cost of kerosene and grease etc., complete complying with standard specification and as directed by the departmental officers.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir,wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete For Place surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist

Supplying and fabrication of M.S Angle iron section for vertical stanction and forming truss used with M.S square/Rectangular pipe and necessary M.S angles for cleat, and .for purlins with M.S square pipe has to be fabricated including cost of one coat of primer, bolt and nuts etc., complete complying with standard specification and as per the direction of corporation officers.

Supplying and laying of profiled colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site)

Supplying and fixing in position 100mm x 50mm x 9.4 Kg channel for the face of RAT GUARD Ending slab with MS bolts 16mm dia 45cm long at 2m centres forming projection to the loading platform finishing in flush with the slab with C.M. 1:3 (One cement and three sand) etc. complete including painting the exposed surface of MS channel with Coats of ANTI CORROSIVE METALLIC NUT BROWN

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Supply and fixing of plain glass 4mm thick including cost of all materials and labour charges etc. complete complying with standard specification.

Painting the old walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coats with best shell lime in all floors including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting new iron work such as steel doors, windows, ventilators, window bars, balustrades etc. with two coats of synthetic enamel paint and approved quality and colour coat in all floors. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works).

supplying and filling in basement with wetmix 250mm thick in layers of not exceeding 250mm thick, well watered, rammed and consolidated including machineries for hire and running charges leader 5 Cum capacity, hire charges for tipper, water sprinkler, vibratory roller all labour charges etc., complete complying with standard specification and as directed.

Carryout the Renovation works in TNCSC Godown campus at Tirukovilur Taluk in Villupuram District. Clearing scrub jungle

Dismantling AC sheet roofing without roof timbers and clearing away and carefully stacking materials useful for reuse as directed by the departmental officers.

Supplying and filling in foundation and basement with M Sand in layers of 150mm thick, well watered, rammed and consolidated including watering etc., complete complying with standard specifications and as directed.

Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed. Foundation basement

In ground floor

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed..

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Labour charges for re alignment of existing AC Corrugated sheets including fixing of ridges, cost of U or J bolts and nuts, bitumen washers, etc. complete and as directed by the Engineer in charge complete.

Servicing the existing rolling shutter of size 1.80 x 2.60m such spring tension adjustment attending leaves repair works, locking adjustment, applying grease and kerosene wahsing for easy uplifting including cost of labour for removing and refixing the rolling shutter, cost of kerosene and grease etc., complete complying with standard specification and as directed by the departmental officers.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir,wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete For Place surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist

Supplying and fabrication of M.S Angle iron section for vertical stanction and forming truss used with M.S square/Rectangular pipe and necessary M.S angles for cleat, and .for purlins with M.S square pipe has to be fabricated including cost of one coat of primer, bolt and nuts etc., complete complying with standard specification and as per the direction of corporation officers.

Supplying and laying of profiled colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site)

Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitutinol direction to avoid the lifting of roofing due to wind, the rate inclusive of neccesary G.I screw, Rubber, Aluminium whaser with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading, unloading and cutting, etc. complete for 42m length.

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Renewing the broken AIW and Ventilator / window glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.

Painting the existing walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coats with best shell lime in all floors including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work such as steel doors, windows, ventilators, window bars, balustrades etc. with two coats of synthetic enamel paint and approved quality and colour coat in all floors. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works).

Carryout the Renovation works in TNCSC Godown campus at Vikravandi Taluk in Villupuram District. clearing scrub jungle

Dismantling AC sheet roofing without roof timbers and clearing away and carefully stacking materials useful for reuse as directed by the departmental officers.

Servicing the existing rolling shutter of size 1.80 x 2.60m such spring tension adjustment attending leaves repair works, locking adjustment, applying grease and kerosene wahsing for easy upli``fting including cost of labour for removing and refixing the rolling shutter, cost of kerosene and grease etc., complete complying with standard specification and as directed by the departmental officers.

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Renewing the broken AIW and Ventilator / window glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.

Painting the old walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coats with best shell lime in all floors including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work such as steel doors, windows, ventilators, window bars, balustrades etc. with two coats of synthetic enamel paint and approved quality and colour coat in all floors. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works).

Supplying and filling in basement with wetmix 250mm thick in layers of not exceeding 250mm thick, well watered, rammed and consolidated including machineries for hire and running charges leader 5 Cum capacity, hire charges for tipper, water sprinkler, vibratory roller all labour charges etc., complete complying with standard specification and as directed.

Providing and laying WBM Road Grade-II metal of 75mm compacted thickness using 1 Cum of 63mm to 45mm IRC metal and 0.24 m3 of gravel for blindage for 10 Sqm. for bottom layer including cost and conveyance of all materials from approved quarry to work site and stacking them to departmental gauge for pre-measurement, as directed by the department officers including labour for spreading metal and gravel for blindage and hand packing to camber watering with all leads for good water slurring and rolling and consolidation by power roller and finishing as per MORD 405 including hire and fuel charges for power roller and water sprinkler and all other tools and plants employed and all other incidental charges etc., complete complying with standard specification and as directed by the departmental officers.

Providing and laying WBM Road Grade-III metal of 75mm compacted thickness by using 1 cum of 53mm to 22.40mm IRC metal and conveyance of all material from approved quarry to worksite and stacking them to departmental gauge for pre-measurement as directed by the department officers including labour for spreading metal and gravel hand packing to camber and gravel for blindage with required quantity of gravel for forming edge bunds watering with all leads for good water slurring rolling and consolidation by power roller and finished as per MORD 405 including hire and fuel charges etc., complete complying with standard specification and as directed by the departmental officers.

Carryout the Renovation works in TNCSC Godown campus at Tindivnam Taluk in Villupuram District clearing scrub jungle

Dismantling AC sheet roofing without roof timbers and clearing away and carefully stacking materials useful for reuse as directed by the departmental officers.

CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering, side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed. In foundation basement.

In ground floor

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed..

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Labour charges for re alignment of existing AC Corrugated sheets including fixing of ridges, cost of U or J bolts and nuts, bitumen washers, etc. complete and as directed by the Engineer in charge complete.

Servicing the existing rolling shutter of size 1.80 x 2.60m such spring tension adjustment attending leaves repair works, locking adjustment, applying grease and kerosene wahsing for easy upli``fting including cost of labour for removing and refixing the rolling shutter, cost of kerosene and grease etc., complete complying with standard specification and as directed by the departmental officers.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir,wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete For Place surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist

Supplying and fabrication of M.S Angle iron section for vertical stanction and forming truss used with M.S squareRectangular pipe and necessary M.S angles for cleat, and .for purlins with M.S square pipe has to be fabricated including cost of one coat of primer, bolt and nuts etc., complete complying with standard specification and as per the direction of corporation officers.

Supplying and laying of profiled colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site)

Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitutinol direction to avoid the lifting of roofing due to wind, the rate inclusive of neccesary G.I screw, Rubber, Aluminium whaser with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading, unloading and cutting, etc. complete for 42m length.

Supplying and fixing in position 100mm x 50mm x 9.4 Kg channel for the face of RAT GUARD Ending slab with MS bolts 16mm dia 45cm long at 2m centres forming projection to the loading platform finishing in flush with the slab with C.M. 1:3 (One cement and three sand) etc. complete including painting the exposed surface of MS channel with Coats of ANTI CORROSIVE METALLIC NUT BROWN

BRICK WORK in cement mortar 1:5(One cement, Five sand)using best quality IInd Class Chamber burnt Bricks of size 9”x4 3/8 x2 3/4’ for walls including cost of scaffolding curing , finishing etc., complete complying with standard specifications and as directed. In foundation and basement

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Renewing the broken AIW and Ventilator / window glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.

Painting the old plastered walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coats with best shell lime in all floors including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work such as steel doors, windows, ventilators, window bars, balustrades etc. with two coats of synthetic enamel paint and approved quality and colour coat in all floors. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works).

supplying and filling in basement with wetmix 250mm thick in layers of not exceeding 250mm thick, well watered, rammed and consolidated including machineries for hire and running charges leader 5 Cum capacity, hire charges for tipper, water sprinkler, vibratory roller all labour charges etc., complete complying with standard specification and as directed.

Carryout the Renovation works in TNCSC Godown campus at Vanur Taluk in Villupuram District Clearing scrub jungle

Dismantling AC sheet roofing without roof timbers and clearing away and carefully stacking materials useful for reuse as directed by the departmental officers.

Supplying and filling in foundation and basement with M Sand in layers of 150mm thick, well watered, rammed and consolidated including watering etc., complete complying with standard specifications and as directed.

Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed. In foundation basement

In Ground floor

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed..

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Labour charges for re alignment of existing AC Corrugated sheets including fixing of ridges, cost of U or J bolts and nuts, bitumen washers, etc. complete and as directed by the Engineer in charge complete.

Servicing the existing rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir,wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete For Place surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist

Supplying and fabrication of M.S Angle iron section for vertical stanction and forming truss used with M.S squareRectangular pipe and necessary M.S angles for cleat, and .for purlins with M.S square pipe has to be fabricated including cost of one coat of primer, bolt and nuts etc., complete complying with standard specification and as per the direction of corporation officers.

Supplying and laying of profiled colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site)

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Renewing the broken AIW and Ventilator / window glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.

Painting the existing plastered walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coats with best shell lime in all floors including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work such as steel doors, windows, ventilators, winow bars, balustrades etc. with two coats of synthetic enamel paint and approved quality and colour coat in all floors. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works).

supplying and filling in basement with wetmix 250mm thick in layers of not exceeding 250mm thick, well watered, rammed and consolidated including machineries for hire and running charges leader 5 Cum capacity,hire charges for tipper,water sprinkler,vibratory roller all labour charges etc., complete complying with standard specification and as directed.

Providing and laying WBM Road Grade-II metal of 75mm compacted thickness using 1 Cum of 63mm to 45mm IRC metal and 0.24 m3 of gravel for blindage for 10 Sqm. for bottom layer including cost and conveyance of all materials from approved quarry to work site and stacking them to departmental gauge for pre-measurement, as directed by the department officers including labour for spreading metal and gravel for blindage and hand packing to camber watering with all leads for good water slurring and rolling and consolidation by power roller and finishing as per MORD 405 including hire and fuel charges for power roller and water sprinkler and all other tools and plants employed and all other incidental charges etc., complete complying with standard specification and as directed by the departmental officers.

Providing and laying WBM Road Grade-III metal of 75mm compacted thickness by using 1 cum of 53mm to 22.40mm IRC metal and conveyance of all material from approved quarry to worksite and stacking them to departmental gauge for pre-measurement as directed by the department officers including labour for spreading metal and gravel hand packing to camber and gravel for blindage with required quantity of gravel for forming edge bunds watering with all leads for good water slurring rolling and consolidation by power roller and finished as per MORD 405 including hire and fuel charges etc., complete complying with standard specification and as directed by the departmental officers.

G Velu