Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.8 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹20.4 L+₹1.5 L (8.14%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹21.8 L+₹3.0 L (15.9%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹25.0 L+₹6.1 L (32.5%)Rejected-Finance | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹27.7 L+₹8.8 L (46.8%)Rejected-Finance | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹23.4 L
EMD Value
₹46,720
Closing Date
5 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Dronachal
GE Dronachal, Dronachal Top, Neori Hills, Bhopal 462038
PROVN OF DUTY ROOM WITH TOILETS FOR SPACE CRAFT CONTROLLER AND ALLIED WORKS AT AYODHYANAGAR (TECH SITE), DSCC BHOPAL
2022_MES_561966_1
8713/E8
Open Tender
Civil Works
Item Rate
180 days
Bhopal
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Garrison Engineer Dronachal
₹46,720
Yes
21 Feb 2023
7 Nov 2022
7 Dec 2022
7 Nov 2022
5 Dec 2022
21 Nov 2022
8 Nov 2022 - 19 Nov 2022
Amount
Note: (i) Please refer schedule 'A' notes before quoting the tender. (ii) Amount of schedule of credit shall be deducted off line by the department.
SCHEDULE 'A' PART -I ( BULIDING WORKS)
PROVN OF DUTY ROOM WITH TOILETS FOR SPACE CRAFT CONTROLLER complete all as shown on drawings and as specified.
Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part- II, Above/Below the lump sum price inserted by MES in Schedule ‘A’ Part- II ( Ref prepriced schedule attached seperately)
Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION as listed in Schedule ‘A’ Part- III, Above/Below the lump sum price inserted by MES in Schedule ‘A’ Part- III ( Ref prepriced schedule attached seperately)
Lump sum price worked out by the contractor for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part- IV, Above/Below the lump sum price inserted by MES in Schedule ‘A’ Part- IV ( Ref prepriced schedule attached seperately)
Lump sum price worked out by the contractor for EARTH WORK as listed in Schedule ‘A’ Part- IV, Above/Below the lump sum price inserted by MES in Schedule ‘A’ Part- V ( Ref prepriced schedule attached seperately)
SCHEDULE 'A' PART -VI SEPARATE TOILET FACILITY AND (MISCELLANEOUS)
M&L PCC 1:4:8 (Type D2) using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
M&L RCC M-25 (design mix) using 20 mm graded stone aggregate as in foundations, including rafts, footing foundation beams, plinth beam, base for coulm, etc basement slab under ream piles and mass concrete complete all as specified and directed by Eng-in-charge.
M&L RCC M-25 (design mix)using 20 mm graded stone aggregate as in Col, Pillars post and struts etc complete all as specified and directed
M&L RCC M-25 (design mix) using 20 mm graded stone aggregate as in beams, cantilever, bressummers, lintel over 1.5m span etc complete all as specified and directed
M&L RCC M-25 (design mix)using 20 mm graded stone aggregate as on Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs andd in shelves and the like complete all as specified and directed
Use and waste of formwork to sides of concrete foundation ,footing,base of column ,raft beams , sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter to rough finish surface of concrete flat complete all as specified and directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs ,floor slabs ,landing and similar work not exc 200mm thick (Horizontal or sloping) to rough finish surface of concrete flat. complete all as specified and directed
Use and waste of formwork to soffits of floor or roof beams, beam haunching ,grider, bressumber, lintels,cantilever ,sleves including supports ,over hang etc also splay between floor and beams to rough finish surface of concrete flat. complete all as specified and directed
Use and waste of formwork to sides of pillars, posts ,struts piers ,columns and stanchion to rough finish surface of concrete square ,rectangular or polygonal. complete all as specified and directed
Use and waste of formwork to edges of concrete flats ,treads, break in floors window cills, concrete railing , opening in concrete wall, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls , horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide to rough finish surface of concrete flat. complete all as specified and directed
M&L TMT mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to complete all as specified and directed
Ditto as item No 18.00 but 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed
M&L Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar1:6. complete all as specified and directed
M&L for rendering 15mm thick cement plaster on other than fair face of brickwork surfaces of wall in (internal) CM 1:6 surfaces finish fair and even with using extra cement with complete all as specified and directed
M&L for rendering 15mm thick on fair faces of brick work or on concrete surfaces of wall in (external) CM 1:4 surfaces finish fair and even with in two layers with water proofing compound @ 3% by weight of cement complete all as specified and directed. Note:-Water proofing compound shall be measured and paid seperately.
M&L for rendering 5mm thick on fair faces of brick work or on concrete surfaces of ceiling in CM 1:4 surfaces finish fair and even with using extra cement complete all as specified and directed.
M&L for providing 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate ) as in sub base of flooring complete all as directed.
M&L cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate 25 mm thick as in floor for receiving screed bed complete all as specified and directed
M&L 75mm PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection and hard standing. complete all as specified and directed
Rendering 10 mm thick cement plaster in CM 1:4 for fixing vertical tiles. complete all as specified and directed
M&L Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc complete all as specified and directed
M&L for non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed
M&L glazed coloured ceramic tiles in verticle surface (450x300mm) x 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed
S&F in door or window frame or for partition of any description with aluminum sections, coloured powder coating not less than 50micron, and fixing in positions including all necessary cleats, lugs, beading, and jointing arrangements, complete all specified & directed.
Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
M&L for APP based polymeric membrane minmum weighing 3 Kg/Sqm and minmum 3 mm thick reinforced with polyster non wove fabric ( wt not less than 150 gms/sqm) including priming of surface by forced application and including overlapping at joints complete all as specified and directed.
M&L 3mm thick sheet glass pin headed ordinary quality and glazing with oil putty in square n. exc 0.50 sqm each pane. complete all as specified and directed
M&L factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of MS tubes 40mm x 20 mm for top and bottom rails MS frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottam rail both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges paneling of prelam solid PVC sheets 10mm thick to be filted in MS frame 40 x 20 mm welded, sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with the solvent cement complete all as specified in SSR Part-II.
Suppling & fixing in opening solid PVC door frame of size 50mm x 47mm made out 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet re-inforced with MS square tube complete all as specified and directed by Eng-in-charge.
S&F 150 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Eng-in-charge.
S&F 150mm Aluminium handles , cast type anodised complete all as specified and directed by Eng-in-charge.
S&F butt hinges, extruded alluminium,with mild steel hinge pin,bright polished and fixed, type 100mm size C21 complete all as specified and directed by Eng-in-charge.
Cutting chases, pinning in to brick work, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and ctting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed by Eng-in-charge.
S&F 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 tubes with all fittings and fixed complete to wall & ceilings and laid in floor, roof top etc. complete all as specified and directed by Eng-in-charge.
Ditto ap per item No.41.00 above but for 25mm dia complete all as specified and directed.
S&F Stop valves for 25mm bore dia of pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed
S & F 15mm bib tap long body fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Eng-in-charge. Make : Jaguar/ Prayag/ Marc/ Hinware
S&F 15 mm dia Stop valves, cast copper alloy screwed presure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed but fancy type chromium plated with long shank and cup (concealed type) complete all as specified and directed
S&F 15 mm pillar taps, heavy duty, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Eng-in-charge.
S & F for Vitreous China wash down water closet pan(Pedestal Pattern) white of size atleast width 390x ht 400mm with 'P' or 'S' trap incl plastic water seat cover & flush pipe of polyethlene 32 mm dia incl connection to drains(or outgoing pipes) and to the flushing pipes, antisyphonage pipe etc incl fixing bolts, excluding flushing cistern complete all as specified and directed by Eng-in-charge.
Supply only 10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets (Fixing rate included in Ser item No 47 above of WC item) complete all as specified and directed
S&F PVC connection 15 mm size with PTMT nuts of length 450mm. complete all as specified and directed by Eng-in-charge.
S&F viterous china wash basin, white, flat back, size 550x400mm excludding taps, waste , chain and plug and porcelain stopper but including brackets,CP Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms) complete all as specified and directed by Eng-in-charge.
S&F 32 mm waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms) complete all as specified and directed by Eng-in-charge.
S&F tubular towel rail, brass chromium plated 20 mm dia `D' type 60 cm long between flanges complete all as specified and directed by Eng-in-charge.
S&F PVC (SWR) floor trap 75mm dia of outlet plain with grating including jointing with solvent cement complete all as specified and directed by Eng-in-charge.
S&F PVC (SWR) pipe 75mm bore single socketed in any length with rubber rings joints laid in trenches or in floor complete all as specified and directed by Eng-in-charge.
S&F PVC(SWR) bend any radious (75mm bore) complete all as specified and directed by Eng-in-charge.
S&F brass chromium plated shower rose size not less than 50 mm dia with swivel joint and arm not less than 20 cm long all as specified & directed
S&F for 500 ltrs capacity rotational moulded pollyethylene water storage tank (cylindrical vertical withdclosed top) hoiusted and fixed in position complete all as specified and directed by Eng-in-charge.
S&F for CP brass Chromium plated angle Stop valves of 15mm bore screwed for 15mm bore iron pipe or union complete all as specified and directed by Eng-in-charge.
S&Fixed for PVC Flexible waste pipe 32 mm dia with socket for steel sink upto floor level and length not less than 0.60 M complete all as specified and directed by Eng-in-charge.
S & F 25 mm bore dia ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipes etc, complete all as specified and directed by Eng-in-charge.
Supply only integral water proofing compound complete all as specified and directed by Eng-in-charge.
M&L for 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls
M&L for 100 dia mm stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof
S&F 110 mm dia PVC (SWR) vent cowl
S&F 75 mm dia Bends, diminishing piecs or tapers (larger bore measured)
Ditto as per item No. 66.00 but 100mm dia
M&L for Preparing of new plaster surface and applying three coat of white wash on newly plaster surface of ceiling including 3mm thick wall care putty complete all as specified and directed by Eng-in-charge.
M&L for finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) and providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed by Eng-in-charge.
M&L for preparation of newly plastered surface of wall and applying two coat of oil bound distemper over a coat of primer of same make on walls including 3mm thick wall care putty complete all as specified and directed by Eng-in-charge.
(INTERNAL WATER SUPPLY) S&F in repair health faucets CP with 1.2 mtr long CP flexible pipe complete all as specified and directed by Eng-in-charge.
S&F 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed by Eng-in-charge.
S&F in repair 100mm dia CP grating (Minimum weight 25 gms) complete all as specified and directed by Eng-in-charge.
S&F brass chromium plated tubular towel ring complete all as specified and as directed by the Engineer-in-Charge
(INTERNAL ELECTRIFICATION ) Supply & fix Wall mounted LED batten with polycorbonate housing and integreted electronic driver of capacity 20 Watt all as specified and directed
Supply & fix Wall mounted LED batten with polycorbonate housing and integreted electronic driver of capacity 05 Watt all as specified and directed
(SUMMER APPLIENCES) Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 5000 CuM per hour complete. Make: Bajaj / CG / Symphony / USHA
Supply, install,testing and commissioning of 5 star BEE rated air cooled hi wall spilt unit indoor/outdoor inverter type airconditioners electric driven( 250 Volts, single phase, 50 HZ supply) with Energy efficient Rotary Compressor, working on R-134 or superior enviornment-friendly refrigerant, codless remote operated, comprising of indoor unit,wall mounted, material of construction of indoor unit ABS, Nominal cooling capacity 4500 KCal/Hr, Minimum Power consumption , Minimnu room discharge airflow 700 CuM /Hr Guranteed cooling capacity(Min) 4275 KCal/Hr, outdoor unit, Material of Cabinet GI Sheet 1.0 mm thick powder coated,Copper tubing, electric connection (Between indoor and outdoor unit located upto a maximum distance of 10 Meters) and condensate water drainage arrangement etc complete of capacity 1.5 Ton complete all as specified and directed at site. Note :-(i) The outdoor unit shall be fixed on wall with standard bracket or fixed on roof /floor with proper MS stand. The cost paid separately in respective items. (ii) Additional length for copper tubing if required at site shall be supply &fix in respective items. Make:- Bluestar/Voltas/Carrier
Fabricating & Fixing Canopy made out of MS angle iron 50 x 50 x 6 mm with 16 guage GI sheet roofing of suitable size for 1.5/2 Ton Capacity split A/C Condensor unit duly fixed on window slab/ out side external wall/ building roof of on ground with proper hold fast with PCC. Angle iron frame duly painted with two coats of black synthetic enamel paint over a coat of red oxide and all as directed.
Supply & fixing single pole and neutral enclosure with a two pin and socket complete with one single pole MCB 240 volts, 20 Amps complete all as specified and directed by Eng-in-charge.
M/L for submain wiring with 2 runs of 10 sqmm single core PVC insulated stranded copper conductor RFLS cable drawn through rigid non metallic PVC conduit with one run of 10.0 Sqmm PVC insulated copper conductor FRLS cable as earth continuity conductor and necessary connections all as directed. Note : 2 runs of 10 sqmm PVC insulated unsheathed copper conductor and 1 run of 10 sqmm PVC insulated unsheathed copper conductor FRLS and 1 run of PVC conduit of size 25 mm will be measured as single run complete all as specified and directed by Eng-in-charge.
Supply and fixing sheet metal enclosure for fixing MCBs SPN with 200 Amps rated neutral busbar 415 Volts, 4 way, with single door fixed on flush to the wall including making the hole in the wall and fixing the DB including cement work and plastering complete all as directed.
Supply and fixing MCBs single pole and neutral, 240 Volts up to 40 Amps
Supply and Fixing MCB single pole, 240 volts 6 to 40 Amps capacity
(External electrification) Supply and laying well burnt Sub Class 'B' locally available best quality laid in trenches perpendicular to UG cable above sand cushioning for cable protection complete all as specified.
Supply and spreading dry coarse sand in trenches for protection of underground electric cable,spread in uniform 23 cm thickness and punned down gently to 18 cm complete all as specified and as directed.
Supply, Laying,Jointing , testing and replace in repairs,16 Sqmm 4 Core XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade laid in trenches/floor or fixed on wall/pole including brass compression cable gland, terminal lug etc.. complete all as specified.
Supply & fixing MCCB, suitable for rotary handle 440 volt AC, 50 Hz, 3 pole, rupturing capacity 25 KA of capacity 63 Amps including making arrangement in spare chamber of existing LT panel.
(External water supply) Supply & laying Pipes galvanized, “Medium class”, supplied and laid complete including fittings G I Pipe 25 mm bore
Supply & laying Pipes galvanized, “Medium class”, supplied and laid complete including fittings G I Pipe 50 mm bore
Supply and fixing the following Gun-metal, gate valves, Gate valve 50 mm bore dia with iron wheel head, screwed both ends on G.I pipes with GI union tapping connection from existing pipeline.
Supply and fixing the following Gun-metal, gate valves, Gate valve 25mm bore dia with iron wheel head, screwed both ends on G.I pipes with GI union tapping connection from existing pipeline.
M&L for cutting of existing 100 mm GI pipe line & providing connection for 100 mm GI pipe line complete with fittings
Construction of brick massonry valve pit chamber of inner dimension 60x60x60 cms suitable for sluice valves upto 80mm size with PCC : 1:4:8 type D-2 for foundation brick work in cm 1:6 rendering 1:4, 15mm plastering , comping in PCC 1:2:4 type B-1 , including MS Sheet cover of hickness 2mm on 50x50x6.0mm angle iron frma work including two coats of synthetic enamelled paint paint overa coat of red oxide primer with making provision of locking arrangement and necessary excavation in soft/loose soil, returing , filling in and removal of surplus soil to a distances 15 mtr not exc 50m complete
AJIT ENTERPRISES
Vee kay construction
Samaksh Enterprises
PG CONSTRUCTION AND COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .