Supply of Furniture for Mechanical Engineering Department

STEEL DESK & BENCH 6' x1.1/2'x 2.1/2' (LxBxH) Steel Desk with book Shelf Writing Top 1.2 mm 18 Gauge CR Sheet, Book Shelf 1 mm 20 Gauge CR Sheet, MS Oil Pipe Leg Frame MIC Welding, Paint Finishing Red Oxide & Paint Finishing, , Double coated Industrial Paint with Epoxy Primer, Writing surface should be inclined by approximately 5o to 10o towards student for comfortable writing. Full length open book-storage shelf shall be provided below the writing table, suitable for keeping textbooks and notebooks, perforation shall consist of uniformly spaced circular holes of dia 5-8mm arranged in a regular pattern. All legs shall be provided with anti skid polymer foot caps. There shall be no inward or outward projection/offset between the table top and front shelf panel. 6' x1.1/4'x 3' (LxBxH) Steel Bench with backrest 1.2 mm 18 Gauge CR Sheet, Sitting Top 1.2 mm 18 Gauge CR Sheet, 24 mm 18 Gauge, MS Oil Pipe Leg and backrest Frame Bottom seat 18'inches and backrest 9'inches CR sheet plate fixing mic welding, paint Finishing Red Oxide & Paint Finishing, Double coated Industrial Paint with Epoxy Primer, Backrest should be inclined by approximately 10o to 15o from the vertical position for comfortable sitting. No perforations shall be provided on the backrest. All legs shall be provided with anti skid polymer foot caps.